[PATCH] ipmi: enable interrupts on the BT driver
Enable interrupts for a BT interface. There is a specific register that
needs to be set up to enable interrupts that also must be modified to clear
the irq.
Also, don't reset the BMC on a BT interface. That's probably not a good
idea as the BMC may be performing other important functions and a reset
should only be a last resort. Also, that register is also used to
enable/disable interrupts to the BT; modifying it may screw up the
interrupts.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 7522bd5..5419440 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -100,6 +100,11 @@
/* FIXME - add watchdog stuff. */
};
+/* Some BT-specific defines we need here. */
+#define IPMI_BT_INTMASK_REG 2
+#define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2
+#define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1
+
enum si_type {
SI_KCS, SI_SMIC, SI_BT
};
@@ -875,6 +880,17 @@
return IRQ_HANDLED;
}
+static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs)
+{
+ struct smi_info *smi_info = data;
+ /* We need to clear the IRQ flag for the BT interface. */
+ smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
+ IPMI_BT_INTMASK_CLEAR_IRQ_BIT
+ | IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
+ return si_irq_handler(irq, data, regs);
+}
+
+
static struct ipmi_smi_handlers handlers =
{
.owner = THIS_MODULE,
@@ -1001,11 +1017,22 @@
if (!info->irq)
return 0;
- rv = request_irq(info->irq,
- si_irq_handler,
- SA_INTERRUPT,
- DEVICE_NAME,
- info);
+ if (info->si_type == SI_BT) {
+ rv = request_irq(info->irq,
+ si_bt_irq_handler,
+ SA_INTERRUPT,
+ DEVICE_NAME,
+ info);
+ if (!rv)
+ /* Enable the interrupt in the BT interface. */
+ info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
+ IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
+ } else
+ rv = request_irq(info->irq,
+ si_irq_handler,
+ SA_INTERRUPT,
+ DEVICE_NAME,
+ info);
if (rv) {
printk(KERN_WARNING
"ipmi_si: %s unable to claim interrupt %d,"
@@ -1024,6 +1051,9 @@
if (!info->irq)
return;
+ if (info->si_type == SI_BT)
+ /* Disable the interrupt in the BT interface. */
+ info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
free_irq(info->irq, info);
}