clk: qcom: Add support for phase locked loops (PLLs)
Add support for Qualcomm's PLLs (phase locked loops). This is
sufficient enough to be able to determine the rate the PLL is
running at. We can add rate setting support later when it's
needed.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/drivers/clk/qcom/clk-pll.c b/drivers/clk/qcom/clk-pll.c
new file mode 100644
index 0000000..0f927c5
--- /dev/null
+++ b/drivers/clk/qcom/clk-pll.c
@@ -0,0 +1,222 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include <asm/div64.h>
+
+#include "clk-pll.h"
+
+#define PLL_OUTCTRL BIT(0)
+#define PLL_BYPASSNL BIT(1)
+#define PLL_RESET_N BIT(2)
+#define PLL_LOCK_COUNT_SHIFT 8
+#define PLL_LOCK_COUNT_MASK 0x3f
+#define PLL_BIAS_COUNT_SHIFT 14
+#define PLL_BIAS_COUNT_MASK 0x3f
+#define PLL_VOTE_FSM_ENA BIT(20)
+#define PLL_VOTE_FSM_RESET BIT(21)
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ int ret;
+ u32 mask, val;
+
+ mask = PLL_OUTCTRL | PLL_RESET_N | PLL_BYPASSNL;
+ ret = regmap_read(pll->clkr.regmap, pll->mode_reg, &val);
+ if (ret)
+ return ret;
+
+ /* Skip if already enabled or in FSM mode */
+ if ((val & mask) == mask || val & PLL_VOTE_FSM_ENA)
+ return 0;
+
+ /* Disable PLL bypass mode. */
+ ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_BYPASSNL,
+ PLL_BYPASSNL);
+ if (ret)
+ return ret;
+
+ /*
+ * H/W requires a 5us delay between disabling the bypass and
+ * de-asserting the reset. Delay 10us just to be safe.
+ */
+ udelay(10);
+
+ /* De-assert active-low PLL reset. */
+ ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_RESET_N,
+ PLL_RESET_N);
+ if (ret)
+ return ret;
+
+ /* Wait until PLL is locked. */
+ udelay(50);
+
+ /* Enable PLL output. */
+ ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_OUTCTRL,
+ PLL_OUTCTRL);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 mask;
+ u32 val;
+
+ regmap_read(pll->clkr.regmap, pll->mode_reg, &val);
+ /* Skip if in FSM mode */
+ if (val & PLL_VOTE_FSM_ENA)
+ return;
+ mask = PLL_OUTCTRL | PLL_RESET_N | PLL_BYPASSNL;
+ regmap_update_bits(pll->clkr.regmap, pll->mode_reg, mask, 0);
+}
+
+static unsigned long
+clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ u32 l, m, n;
+ unsigned long rate;
+ u64 tmp;
+
+ regmap_read(pll->clkr.regmap, pll->l_reg, &l);
+ regmap_read(pll->clkr.regmap, pll->m_reg, &m);
+ regmap_read(pll->clkr.regmap, pll->n_reg, &n);
+
+ l &= 0x3ff;
+ m &= 0x7ffff;
+ n &= 0x7ffff;
+
+ rate = parent_rate * l;
+ if (n) {
+ tmp = parent_rate;
+ tmp *= m;
+ do_div(tmp, n);
+ rate += tmp;
+ }
+ return rate;
+}
+
+const struct clk_ops clk_pll_ops = {
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_pll_ops);
+
+static int wait_for_pll(struct clk_pll *pll)
+{
+ u32 val;
+ int count;
+ int ret;
+ const char *name = __clk_get_name(pll->clkr.hw.clk);
+
+ /* Wait for pll to enable. */
+ for (count = 200; count > 0; count--) {
+ ret = regmap_read(pll->clkr.regmap, pll->status_reg, &val);
+ if (ret)
+ return ret;
+ if (val & BIT(pll->status_bit))
+ return 0;
+ udelay(1);
+ }
+
+ WARN(1, "%s didn't enable after voting for it!\n", name);
+ return -ETIMEDOUT;
+}
+
+static int clk_pll_vote_enable(struct clk_hw *hw)
+{
+ int ret;
+ struct clk_pll *p = to_clk_pll(__clk_get_hw(__clk_get_parent(hw->clk)));
+
+ ret = clk_enable_regmap(hw);
+ if (ret)
+ return ret;
+
+ return wait_for_pll(p);
+}
+
+const struct clk_ops clk_pll_vote_ops = {
+ .enable = clk_pll_vote_enable,
+ .disable = clk_disable_regmap,
+};
+EXPORT_SYMBOL_GPL(clk_pll_vote_ops);
+
+static void
+clk_pll_set_fsm_mode(struct clk_pll *pll, struct regmap *regmap)
+{
+ u32 val;
+ u32 mask;
+
+ /* De-assert reset to FSM */
+ regmap_update_bits(regmap, pll->mode_reg, PLL_VOTE_FSM_RESET, 0);
+
+ /* Program bias count and lock count */
+ val = 1 << PLL_BIAS_COUNT_SHIFT;
+ mask = PLL_BIAS_COUNT_MASK << PLL_BIAS_COUNT_SHIFT;
+ mask |= PLL_LOCK_COUNT_MASK << PLL_LOCK_COUNT_SHIFT;
+ regmap_update_bits(regmap, pll->mode_reg, mask, val);
+
+ /* Enable PLL FSM voting */
+ regmap_update_bits(regmap, pll->mode_reg, PLL_VOTE_FSM_ENA,
+ PLL_VOTE_FSM_ENA);
+}
+
+static void clk_pll_configure(struct clk_pll *pll, struct regmap *regmap,
+ const struct pll_config *config)
+{
+ u32 val;
+ u32 mask;
+
+ regmap_write(regmap, pll->l_reg, config->l);
+ regmap_write(regmap, pll->m_reg, config->m);
+ regmap_write(regmap, pll->n_reg, config->n);
+
+ val = config->vco_val;
+ val |= config->pre_div_val;
+ val |= config->post_div_val;
+ val |= config->mn_ena_mask;
+ val |= config->main_output_mask;
+ val |= config->aux_output_mask;
+
+ mask = config->vco_mask;
+ mask |= config->pre_div_mask;
+ mask |= config->post_div_mask;
+ mask |= config->mn_ena_mask;
+ mask |= config->main_output_mask;
+ mask |= config->aux_output_mask;
+
+ regmap_update_bits(regmap, pll->config_reg, mask, val);
+}
+
+void clk_pll_configure_sr_hpm_lp(struct clk_pll *pll, struct regmap *regmap,
+ const struct pll_config *config, bool fsm_mode)
+{
+ clk_pll_configure(pll, regmap, config);
+ if (fsm_mode)
+ clk_pll_set_fsm_mode(pll, regmap);
+}
+EXPORT_SYMBOL_GPL(clk_pll_configure_sr_hpm_lp);