drivers/net/wireless/rt2x00/rt2x00crypto.c - kernel/msm-4.19 - Gitiles

 /*
 	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 	<http://rt2x00.serialmonkey.com>

 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
 	the Free Software Foundation; either version 2 of the License, or
 	(at your option) any later version.

 	This program is distributed in the hope that it will be useful,
 	but WITHOUT ANY WARRANTY; without even the implied warranty of
 	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 	GNU General Public License for more details.

 	You should have received a copy of the GNU General Public License
 	along with this program; if not, write to the
 	Free Software Foundation, Inc.,
 	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */

 /*
 	Module: rt2x00lib
 	Abstract: rt2x00 crypto specific routines.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>

 #include "rt2x00.h"
 #include "rt2x00lib.h"

 enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
 {
 	switch (key->alg) {
 	case ALG_WEP:
 		if (key->keylen == LEN_WEP40)
 			return CIPHER_WEP64;
 		else
 			return CIPHER_WEP128;
 	case ALG_TKIP:
 		return CIPHER_TKIP;
 	case ALG_CCMP:
 		return CIPHER_AES;
 	default:
 		return CIPHER_NONE;
 	}
 }

 void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
 				       struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;

 	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) ||
 	    !hw_key || entry->skb->do_not_encrypt)
 		return;

 	__set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);

 	txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key);

 	if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
 		__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);

 	txdesc->key_idx = hw_key->hw_key_idx;
 	txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
 	txdesc->iv_len = hw_key->iv_len;

 	if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
 		__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);

 	if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
 		__set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags);
 }

 unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
 				      struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_key_conf *key = tx_info->control.hw_key;
 	unsigned int overhead = 0;

 	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) ||
 	    !key || skb->do_not_encrypt)
 		return overhead;

 	/*
 	 * Extend frame length to include IV/EIV/ICV/MMIC,
 	 * note that these lengths should only be added when
 	 * mac80211 does not generate it.
 	 */
 	overhead += key->icv_len;

 	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
 		overhead += key->iv_len;

 	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
 		if (key->alg == ALG_TKIP)
 			overhead += 8;
 	}

 	return overhead;
 }

 void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

 	if (unlikely(!txdesc->iv_len))
 		return;

 	/* Copy IV/EIV data */
 	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
 }

 void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

 	if (unlikely(!txdesc->iv_len))
 		return;

 	/* Copy IV/EIV data */
 	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);

 	/* Move ieee80211 header */
 	memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset);

 	/* Pull buffer to correct size */
 	skb_pull(skb, txdesc->iv_len);

 	/* IV/EIV data has officially be stripped */
 	skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
 }

 void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 	const unsigned int iv_len =
 	    ((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4);

 	if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
 		return;

 	skb_push(skb, iv_len);

 	/* Move ieee80211 header */
 	memmove(skb->data, skb->data + iv_len, header_length);

 	/* Copy IV/EIV data */
 	memcpy(skb->data + header_length, skbdesc->iv, iv_len);

 	/* IV/EIV data has returned into the frame */
 	skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
 }

 void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
 			       unsigned int header_length,
 			       struct rxdone_entry_desc *rxdesc)
 {
 	unsigned int payload_len = rxdesc->size - header_length;
 	unsigned int iv_len;
 	unsigned int icv_len;
 	unsigned int transfer = 0;

 	/*
 	 * WEP64/WEP128: Provides IV & ICV
 	 * TKIP: Provides IV/EIV & ICV
 	 * AES: Provies IV/EIV & ICV
 	 */
 	switch (rxdesc->cipher) {
 	case CIPHER_WEP64:
 	case CIPHER_WEP128:
 		iv_len = 4;
 		icv_len = 4;
 		break;
 	case CIPHER_TKIP:
 		iv_len = 8;
 		icv_len = 4;
 		break;
 	case CIPHER_AES:
 		iv_len = 8;
 		icv_len = 8;
 		break;
 	default:
 		/* Unsupport type */
 		return;
 	}

 	/*
 	 * Make room for new data, note that we increase both
 	 * headsize and tailsize when required. The tailsize is
 	 * only needed when ICV data needs to be inserted and
 	 * the padding is smaller than the ICV data.
 	 * When alignment requirements is greater than the
 	 * ICV data we must trim the skb to the correct size
 	 * because we need to remove the extra bytes.
 	 */
 	skb_push(skb, iv_len + align);
 	if (align < icv_len)
 		skb_put(skb, icv_len - align);
 	else if (align > icv_len)
 		skb_trim(skb, rxdesc->size + iv_len + icv_len);

 	/* Move ieee80211 header */
 	memmove(skb->data + transfer,
 		skb->data + transfer + iv_len + align,
 		header_length);
 	transfer += header_length;

 	/* Copy IV/EIV data */
 	memcpy(skb->data + transfer, rxdesc->iv, iv_len);
 	transfer += iv_len;

 	/* Move payload */
 	if (align) {
 		memmove(skb->data + transfer,
 			skb->data + transfer + align,
 			payload_len);
 	}

 	/*
 	 * NOTE: Always count the payload as transfered,
 	 * even when alignment was set to zero. This is required
 	 * for determining the correct offset for the ICV data.
 	 */
 	transfer += payload_len;

 	/*
 	 * Copy ICV data
 	 * AES appends 8 bytes, we can't fill the upper
 	 * 4 bytes, but mac80211 doesn't care about what
 	 * we provide here anyway and strips it immediately.
 	 */
 	memcpy(skb->data + transfer, &rxdesc->icv, 4);
 	transfer += icv_len;

 	/* IV/EIV/ICV has been inserted into frame */
 	rxdesc->size = transfer;
 	rxdesc->flags &= ~RX_FLAG_IV_STRIPPED;
 }
	/*
	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
	<http://rt2x00.serialmonkey.com>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the
	Free Software Foundation, Inc.,
	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	/*
	Module: rt2x00lib
	Abstract: rt2x00 crypto specific routines.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>

	#include "rt2x00.h"
	#include "rt2x00lib.h"

	enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
	{
	switch (key->alg) {
	case ALG_WEP:
	if (key->keylen == LEN_WEP40)
	return CIPHER_WEP64;
	else
	return CIPHER_WEP128;
	case ALG_TKIP:
	return CIPHER_TKIP;
	case ALG_CCMP:
	return CIPHER_AES;
	default:
	return CIPHER_NONE;
	}
	}

	void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
	struct txentry_desc *txdesc)
	{
	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
	struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;

	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) \|\|
	!hw_key \|\| entry->skb->do_not_encrypt)
	return;

	__set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);

	txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key);

	if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
	__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);

	txdesc->key_idx = hw_key->hw_key_idx;
	txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
	txdesc->iv_len = hw_key->iv_len;

	if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
	__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);

	if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
	__set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags);
	}

	unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
	struct sk_buff *skb)
	{
	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
	struct ieee80211_key_conf *key = tx_info->control.hw_key;
	unsigned int overhead = 0;

	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) \|\|
	!key \|\| skb->do_not_encrypt)
	return overhead;

	/*
	* Extend frame length to include IV/EIV/ICV/MMIC,
	* note that these lengths should only be added when
	* mac80211 does not generate it.
	*/
	overhead += key->icv_len;

	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
	overhead += key->iv_len;

	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
	if (key->alg == ALG_TKIP)
	overhead += 8;
	}

	return overhead;
	}

	void rt2x00crypto_tx_copy_iv(struct sk_buff skb, struct txentry_desc txdesc)
	{
	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

	if (unlikely(!txdesc->iv_len))
	return;

	/* Copy IV/EIV data */
	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
	}

	void rt2x00crypto_tx_remove_iv(struct sk_buff skb, struct txentry_desc txdesc)
	{
	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);

	if (unlikely(!txdesc->iv_len))
	return;

	/* Copy IV/EIV data */
	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);

	/* Move ieee80211 header */
	memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset);

	/* Pull buffer to correct size */
	skb_pull(skb, txdesc->iv_len);

	/* IV/EIV data has officially be stripped */
	skbdesc->flags \|= FRAME_DESC_IV_STRIPPED;
	}

	void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
	{
	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
	const unsigned int iv_len =
	((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4);

	if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
	return;

	skb_push(skb, iv_len);

	/* Move ieee80211 header */
	memmove(skb->data, skb->data + iv_len, header_length);

	/* Copy IV/EIV data */
	memcpy(skb->data + header_length, skbdesc->iv, iv_len);

	/* IV/EIV data has returned into the frame */
	skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
	}

	void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
	unsigned int header_length,
	struct rxdone_entry_desc *rxdesc)
	{
	unsigned int payload_len = rxdesc->size - header_length;
	unsigned int iv_len;
	unsigned int icv_len;
	unsigned int transfer = 0;

	/*
	* WEP64/WEP128: Provides IV & ICV
	* TKIP: Provides IV/EIV & ICV
	* AES: Provies IV/EIV & ICV
	*/
	switch (rxdesc->cipher) {
	case CIPHER_WEP64:
	case CIPHER_WEP128:
	iv_len = 4;
	icv_len = 4;
	break;
	case CIPHER_TKIP:
	iv_len = 8;
	icv_len = 4;
	break;
	case CIPHER_AES:
	iv_len = 8;
	icv_len = 8;
	break;
	default:
	/* Unsupport type */
	return;
	}

	/*
	* Make room for new data, note that we increase both
	* headsize and tailsize when required. The tailsize is
	* only needed when ICV data needs to be inserted and
	* the padding is smaller than the ICV data.
	* When alignment requirements is greater than the
	* ICV data we must trim the skb to the correct size
	* because we need to remove the extra bytes.
	*/
	skb_push(skb, iv_len + align);
	if (align < icv_len)
	skb_put(skb, icv_len - align);
	else if (align > icv_len)
	skb_trim(skb, rxdesc->size + iv_len + icv_len);

	/* Move ieee80211 header */
	memmove(skb->data + transfer,
	skb->data + transfer + iv_len + align,
	header_length);
	transfer += header_length;

	/* Copy IV/EIV data */
	memcpy(skb->data + transfer, rxdesc->iv, iv_len);
	transfer += iv_len;

	/* Move payload */
	if (align) {
	memmove(skb->data + transfer,
	skb->data + transfer + align,
	payload_len);
	}

	/*
	* NOTE: Always count the payload as transfered,
	* even when alignment was set to zero. This is required
	* for determining the correct offset for the ICV data.
	*/
	transfer += payload_len;

	/*
	* Copy ICV data
	* AES appends 8 bytes, we can't fill the upper
	* 4 bytes, but mac80211 doesn't care about what
	* we provide here anyway and strips it immediately.
	*/
	memcpy(skb->data + transfer, &rxdesc->icv, 4);
	transfer += icv_len;

	/* IV/EIV/ICV has been inserted into frame */
	rxdesc->size = transfer;
	rxdesc->flags &= ~RX_FLAG_IV_STRIPPED;
	}