video: imxfb: Use regulator API with LCD class for powering
This patch replaces custom lcd_power() callback with
regulator API over LCD class.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 9821b824..a7a4a9c 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -21,6 +21,10 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
+
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -195,14 +199,58 @@
static struct i2c_board_info mx27ads_i2c_devices[] = {
};
-void lcd_power(int on)
+static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- if (on)
+ if (value)
__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
else
__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
+static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+ return 0;
+}
+
+#define MX27ADS_LCD_GPIO (6 * 32)
+
+static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
+ REGULATOR_SUPPLY("lcd", "imx-fb.0");
+
+static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+},
+ .consumer_supplies = &mx27ads_lcd_regulator_consumer,
+ .num_consumer_supplies = 1,
+};
+
+static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
+ .supply_name = "LCD",
+ .microvolts = 3300000,
+ .gpio = MX27ADS_LCD_GPIO,
+ .init_data = &mx27ads_lcd_regulator_init_data,
+};
+
+static void __init mx27ads_regulator_init(void)
+{
+ struct gpio_chip *vchip;
+
+ vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
+ vchip->owner = THIS_MODULE;
+ vchip->label = "LCD";
+ vchip->base = MX27ADS_LCD_GPIO;
+ vchip->ngpio = 1;
+ vchip->direction_output = vgpio_dir_out;
+ vchip->set = vgpio_set;
+ gpiochip_add(vchip);
+
+ platform_device_register_data(&platform_bus, "reg-fixed-voltage",
+ PLATFORM_DEVID_AUTO,
+ &mx27ads_lcd_regulator_pdata,
+ sizeof(mx27ads_lcd_regulator_pdata));
+}
+
static struct imx_fb_videomode mx27ads_modes[] = {
{
.mode = {
@@ -239,8 +287,6 @@
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
-
- .lcd_power = lcd_power,
};
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
@@ -304,6 +350,7 @@
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
+ mx27ads_regulator_init();
imx27_add_imx_fb(&mx27ads_fb_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_mxc_mmc(1, &sdhc2_pdata);