| /* |
| * sun4i-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC |
| * |
| * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> |
| * |
| * Core file which registers crypto algorithms supported by the SS. |
| * |
| * You could find a link for the datasheet in Documentation/arm/sunxi/README |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| #include <linux/clk.h> |
| #include <linux/crypto.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <crypto/scatterwalk.h> |
| #include <linux/scatterlist.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/reset.h> |
| |
| #include "sun4i-ss.h" |
| |
| static struct sun4i_ss_alg_template ss_algs[] = { |
| { .type = CRYPTO_ALG_TYPE_AHASH, |
| .mode = SS_OP_MD5, |
| .alg.hash = { |
| .init = sun4i_hash_init, |
| .update = sun4i_hash_update, |
| .final = sun4i_hash_final, |
| .finup = sun4i_hash_finup, |
| .digest = sun4i_hash_digest, |
| .export = sun4i_hash_export_md5, |
| .import = sun4i_hash_import_md5, |
| .halg = { |
| .digestsize = MD5_DIGEST_SIZE, |
| .statesize = sizeof(struct md5_state), |
| .base = { |
| .cra_name = "md5", |
| .cra_driver_name = "md5-sun4i-ss", |
| .cra_priority = 300, |
| .cra_alignmask = 3, |
| .cra_flags = CRYPTO_ALG_TYPE_AHASH, |
| .cra_blocksize = MD5_HMAC_BLOCK_SIZE, |
| .cra_ctxsize = sizeof(struct sun4i_req_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_type = &crypto_ahash_type, |
| .cra_init = sun4i_hash_crainit |
| } |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_AHASH, |
| .mode = SS_OP_SHA1, |
| .alg.hash = { |
| .init = sun4i_hash_init, |
| .update = sun4i_hash_update, |
| .final = sun4i_hash_final, |
| .finup = sun4i_hash_finup, |
| .digest = sun4i_hash_digest, |
| .export = sun4i_hash_export_sha1, |
| .import = sun4i_hash_import_sha1, |
| .halg = { |
| .digestsize = SHA1_DIGEST_SIZE, |
| .statesize = sizeof(struct sha1_state), |
| .base = { |
| .cra_name = "sha1", |
| .cra_driver_name = "sha1-sun4i-ss", |
| .cra_priority = 300, |
| .cra_alignmask = 3, |
| .cra_flags = CRYPTO_ALG_TYPE_AHASH, |
| .cra_blocksize = SHA1_BLOCK_SIZE, |
| .cra_ctxsize = sizeof(struct sun4i_req_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_type = &crypto_ahash_type, |
| .cra_init = sun4i_hash_crainit |
| } |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_SKCIPHER, |
| .alg.crypto = { |
| .setkey = sun4i_ss_aes_setkey, |
| .encrypt = sun4i_ss_cbc_aes_encrypt, |
| .decrypt = sun4i_ss_cbc_aes_decrypt, |
| .min_keysize = AES_MIN_KEY_SIZE, |
| .max_keysize = AES_MAX_KEY_SIZE, |
| .ivsize = AES_BLOCK_SIZE, |
| .base = { |
| .cra_name = "cbc(aes)", |
| .cra_driver_name = "cbc-aes-sun4i-ss", |
| .cra_priority = 300, |
| .cra_blocksize = AES_BLOCK_SIZE, |
| .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_ctxsize = sizeof(struct sun4i_tfm_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_alignmask = 3, |
| .cra_init = sun4i_ss_cipher_init, |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_SKCIPHER, |
| .alg.crypto = { |
| .setkey = sun4i_ss_aes_setkey, |
| .encrypt = sun4i_ss_ecb_aes_encrypt, |
| .decrypt = sun4i_ss_ecb_aes_decrypt, |
| .min_keysize = AES_MIN_KEY_SIZE, |
| .max_keysize = AES_MAX_KEY_SIZE, |
| .ivsize = AES_BLOCK_SIZE, |
| .base = { |
| .cra_name = "ecb(aes)", |
| .cra_driver_name = "ecb-aes-sun4i-ss", |
| .cra_priority = 300, |
| .cra_blocksize = AES_BLOCK_SIZE, |
| .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_ctxsize = sizeof(struct sun4i_tfm_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_alignmask = 3, |
| .cra_init = sun4i_ss_cipher_init, |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_SKCIPHER, |
| .alg.crypto = { |
| .setkey = sun4i_ss_des_setkey, |
| .encrypt = sun4i_ss_cbc_des_encrypt, |
| .decrypt = sun4i_ss_cbc_des_decrypt, |
| .min_keysize = DES_KEY_SIZE, |
| .max_keysize = DES_KEY_SIZE, |
| .ivsize = DES_BLOCK_SIZE, |
| .base = { |
| .cra_name = "cbc(des)", |
| .cra_driver_name = "cbc-des-sun4i-ss", |
| .cra_priority = 300, |
| .cra_blocksize = DES_BLOCK_SIZE, |
| .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_ctxsize = sizeof(struct sun4i_req_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_alignmask = 3, |
| .cra_init = sun4i_ss_cipher_init, |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_SKCIPHER, |
| .alg.crypto = { |
| .setkey = sun4i_ss_des_setkey, |
| .encrypt = sun4i_ss_ecb_des_encrypt, |
| .decrypt = sun4i_ss_ecb_des_decrypt, |
| .min_keysize = DES_KEY_SIZE, |
| .max_keysize = DES_KEY_SIZE, |
| .base = { |
| .cra_name = "ecb(des)", |
| .cra_driver_name = "ecb-des-sun4i-ss", |
| .cra_priority = 300, |
| .cra_blocksize = DES_BLOCK_SIZE, |
| .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_ctxsize = sizeof(struct sun4i_req_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_alignmask = 3, |
| .cra_init = sun4i_ss_cipher_init, |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_SKCIPHER, |
| .alg.crypto = { |
| .setkey = sun4i_ss_des3_setkey, |
| .encrypt = sun4i_ss_cbc_des3_encrypt, |
| .decrypt = sun4i_ss_cbc_des3_decrypt, |
| .min_keysize = DES3_EDE_KEY_SIZE, |
| .max_keysize = DES3_EDE_KEY_SIZE, |
| .ivsize = DES3_EDE_BLOCK_SIZE, |
| .base = { |
| .cra_name = "cbc(des3_ede)", |
| .cra_driver_name = "cbc-des3-sun4i-ss", |
| .cra_priority = 300, |
| .cra_blocksize = DES3_EDE_BLOCK_SIZE, |
| .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_ctxsize = sizeof(struct sun4i_req_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_alignmask = 3, |
| .cra_init = sun4i_ss_cipher_init, |
| } |
| } |
| }, |
| { .type = CRYPTO_ALG_TYPE_SKCIPHER, |
| .alg.crypto = { |
| .setkey = sun4i_ss_des3_setkey, |
| .encrypt = sun4i_ss_ecb_des3_encrypt, |
| .decrypt = sun4i_ss_ecb_des3_decrypt, |
| .min_keysize = DES3_EDE_KEY_SIZE, |
| .max_keysize = DES3_EDE_KEY_SIZE, |
| .ivsize = DES3_EDE_BLOCK_SIZE, |
| .base = { |
| .cra_name = "ecb(des3_ede)", |
| .cra_driver_name = "ecb-des3-sun4i-ss", |
| .cra_priority = 300, |
| .cra_blocksize = DES3_EDE_BLOCK_SIZE, |
| .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER, |
| .cra_ctxsize = sizeof(struct sun4i_req_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_alignmask = 3, |
| .cra_init = sun4i_ss_cipher_init, |
| } |
| } |
| }, |
| #ifdef CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG |
| { |
| .type = CRYPTO_ALG_TYPE_RNG, |
| .alg.rng = { |
| .base = { |
| .cra_name = "stdrng", |
| .cra_driver_name = "sun4i_ss_rng", |
| .cra_priority = 300, |
| .cra_ctxsize = 0, |
| .cra_module = THIS_MODULE, |
| }, |
| .generate = sun4i_ss_prng_generate, |
| .seed = sun4i_ss_prng_seed, |
| .seedsize = SS_SEED_LEN / BITS_PER_BYTE, |
| } |
| }, |
| #endif |
| }; |
| |
| static int sun4i_ss_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| u32 v; |
| int err, i; |
| unsigned long cr; |
| const unsigned long cr_ahb = 24 * 1000 * 1000; |
| const unsigned long cr_mod = 150 * 1000 * 1000; |
| struct sun4i_ss_ctx *ss; |
| |
| if (!pdev->dev.of_node) |
| return -ENODEV; |
| |
| ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL); |
| if (!ss) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| ss->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(ss->base)) { |
| dev_err(&pdev->dev, "Cannot request MMIO\n"); |
| return PTR_ERR(ss->base); |
| } |
| |
| ss->ssclk = devm_clk_get(&pdev->dev, "mod"); |
| if (IS_ERR(ss->ssclk)) { |
| err = PTR_ERR(ss->ssclk); |
| dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err); |
| return err; |
| } |
| dev_dbg(&pdev->dev, "clock ss acquired\n"); |
| |
| ss->busclk = devm_clk_get(&pdev->dev, "ahb"); |
| if (IS_ERR(ss->busclk)) { |
| err = PTR_ERR(ss->busclk); |
| dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err); |
| return err; |
| } |
| dev_dbg(&pdev->dev, "clock ahb_ss acquired\n"); |
| |
| ss->reset = devm_reset_control_get_optional(&pdev->dev, "ahb"); |
| if (IS_ERR(ss->reset)) { |
| if (PTR_ERR(ss->reset) == -EPROBE_DEFER) |
| return PTR_ERR(ss->reset); |
| dev_info(&pdev->dev, "no reset control found\n"); |
| ss->reset = NULL; |
| } |
| |
| /* Enable both clocks */ |
| err = clk_prepare_enable(ss->busclk); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); |
| return err; |
| } |
| err = clk_prepare_enable(ss->ssclk); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n"); |
| goto error_ssclk; |
| } |
| |
| /* |
| * Check that clock have the correct rates given in the datasheet |
| * Try to set the clock to the maximum allowed |
| */ |
| err = clk_set_rate(ss->ssclk, cr_mod); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n"); |
| goto error_clk; |
| } |
| |
| /* Deassert reset if we have a reset control */ |
| if (ss->reset) { |
| err = reset_control_deassert(ss->reset); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot deassert reset control\n"); |
| goto error_clk; |
| } |
| } |
| |
| /* |
| * The only impact on clocks below requirement are bad performance, |
| * so do not print "errors" |
| * warn on Overclocked clocks |
| */ |
| cr = clk_get_rate(ss->busclk); |
| if (cr >= cr_ahb) |
| dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", |
| cr, cr / 1000000, cr_ahb); |
| else |
| dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", |
| cr, cr / 1000000, cr_ahb); |
| |
| cr = clk_get_rate(ss->ssclk); |
| if (cr <= cr_mod) |
| if (cr < cr_mod) |
| dev_warn(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", |
| cr, cr / 1000000, cr_mod); |
| else |
| dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", |
| cr, cr / 1000000, cr_mod); |
| else |
| dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n", |
| cr, cr / 1000000, cr_mod); |
| |
| /* |
| * Datasheet named it "Die Bonding ID" |
| * I expect to be a sort of Security System Revision number. |
| * Since the A80 seems to have an other version of SS |
| * this info could be useful |
| */ |
| writel(SS_ENABLED, ss->base + SS_CTL); |
| v = readl(ss->base + SS_CTL); |
| v >>= 16; |
| v &= 0x07; |
| dev_info(&pdev->dev, "Die ID %d\n", v); |
| writel(0, ss->base + SS_CTL); |
| |
| ss->dev = &pdev->dev; |
| |
| spin_lock_init(&ss->slock); |
| |
| for (i = 0; i < ARRAY_SIZE(ss_algs); i++) { |
| ss_algs[i].ss = ss; |
| switch (ss_algs[i].type) { |
| case CRYPTO_ALG_TYPE_SKCIPHER: |
| err = crypto_register_skcipher(&ss_algs[i].alg.crypto); |
| if (err) { |
| dev_err(ss->dev, "Fail to register %s\n", |
| ss_algs[i].alg.crypto.base.cra_name); |
| goto error_alg; |
| } |
| break; |
| case CRYPTO_ALG_TYPE_AHASH: |
| err = crypto_register_ahash(&ss_algs[i].alg.hash); |
| if (err) { |
| dev_err(ss->dev, "Fail to register %s\n", |
| ss_algs[i].alg.hash.halg.base.cra_name); |
| goto error_alg; |
| } |
| break; |
| case CRYPTO_ALG_TYPE_RNG: |
| err = crypto_register_rng(&ss_algs[i].alg.rng); |
| if (err) { |
| dev_err(ss->dev, "Fail to register %s\n", |
| ss_algs[i].alg.rng.base.cra_name); |
| } |
| break; |
| } |
| } |
| platform_set_drvdata(pdev, ss); |
| return 0; |
| error_alg: |
| i--; |
| for (; i >= 0; i--) { |
| switch (ss_algs[i].type) { |
| case CRYPTO_ALG_TYPE_SKCIPHER: |
| crypto_unregister_skcipher(&ss_algs[i].alg.crypto); |
| break; |
| case CRYPTO_ALG_TYPE_AHASH: |
| crypto_unregister_ahash(&ss_algs[i].alg.hash); |
| break; |
| case CRYPTO_ALG_TYPE_RNG: |
| crypto_unregister_rng(&ss_algs[i].alg.rng); |
| break; |
| } |
| } |
| if (ss->reset) |
| reset_control_assert(ss->reset); |
| error_clk: |
| clk_disable_unprepare(ss->ssclk); |
| error_ssclk: |
| clk_disable_unprepare(ss->busclk); |
| return err; |
| } |
| |
| static int sun4i_ss_remove(struct platform_device *pdev) |
| { |
| int i; |
| struct sun4i_ss_ctx *ss = platform_get_drvdata(pdev); |
| |
| for (i = 0; i < ARRAY_SIZE(ss_algs); i++) { |
| switch (ss_algs[i].type) { |
| case CRYPTO_ALG_TYPE_SKCIPHER: |
| crypto_unregister_skcipher(&ss_algs[i].alg.crypto); |
| break; |
| case CRYPTO_ALG_TYPE_AHASH: |
| crypto_unregister_ahash(&ss_algs[i].alg.hash); |
| break; |
| case CRYPTO_ALG_TYPE_RNG: |
| crypto_unregister_rng(&ss_algs[i].alg.rng); |
| break; |
| } |
| } |
| |
| writel(0, ss->base + SS_CTL); |
| if (ss->reset) |
| reset_control_assert(ss->reset); |
| clk_disable_unprepare(ss->busclk); |
| clk_disable_unprepare(ss->ssclk); |
| return 0; |
| } |
| |
| static const struct of_device_id a20ss_crypto_of_match_table[] = { |
| { .compatible = "allwinner,sun4i-a10-crypto" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table); |
| |
| static struct platform_driver sun4i_ss_driver = { |
| .probe = sun4i_ss_probe, |
| .remove = sun4i_ss_remove, |
| .driver = { |
| .name = "sun4i-ss", |
| .of_match_table = a20ss_crypto_of_match_table, |
| }, |
| }; |
| |
| module_platform_driver(sun4i_ss_driver); |
| |
| MODULE_ALIAS("platform:sun4i-ss"); |
| MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); |