| /* |
| * GE Fanuc SBC610 Device Tree Source |
| * |
| * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * Based on: SBS CM6 Device Tree Source |
| * Copyright 2007 SBS Technologies GmbH & Co. KG |
| * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) |
| * Copyright 2006 Freescale Semiconductor Inc. |
| */ |
| |
| /* |
| * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "GEF_SBC610"; |
| compatible = "gef,sbc610"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8641@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <32768>; // L1, 32K |
| i-cache-size = <32768>; // L1, 32K |
| timebase-frequency = <0>; // From uboot |
| bus-frequency = <0>; // From uboot |
| clock-frequency = <0>; // From uboot |
| }; |
| PowerPC,8641@1 { |
| device_type = "cpu"; |
| reg = <1>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <32768>; // L1, 32K |
| i-cache-size = <32768>; // L1, 32K |
| timebase-frequency = <0>; // From uboot |
| bus-frequency = <0>; // From uboot |
| clock-frequency = <0>; // From uboot |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x40000000>; // set by uboot |
| }; |
| |
| localbus@fef05000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8641-localbus", "simple-bus"; |
| reg = <0xfef05000 0x1000>; |
| interrupts = <19 2>; |
| interrupt-parent = <&mpic>; |
| |
| ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash |
| 1 0 0xe8000000 0x08000000 // Paged Flash 0 |
| 2 0 0xe0000000 0x08000000 // Paged Flash 1 |
| 3 0 0xfc100000 0x00020000 // NVRAM |
| 4 0 0xfc000000 0x00008000 // FPGA |
| 5 0 0xfc008000 0x00008000 // AFIX FPGA |
| 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) |
| 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) |
| |
| fpga@4,0 { |
| compatible = "gef,fpga-regs"; |
| reg = <0x4 0x0 0x40>; |
| }; |
| |
| wdt@4,2000 { |
| compatible = "gef,fpga-wdt"; |
| reg = <0x4 0x2000 0x8>; |
| interrupts = <0x1a 0x4>; |
| interrupt-parent = <&gef_pic>; |
| }; |
| /* Second watchdog available, driver currently supports one. |
| wdt@4,2010 { |
| compatible = "gef,fpga-wdt"; |
| reg = <0x4 0x2010 0x8>; |
| interrupts = <0x1b 0x4>; |
| interrupt-parent = <&gef_pic>; |
| }; |
| */ |
| gef_pic: pic@4,4000 { |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "gef,fpga-pic"; |
| reg = <0x4 0x4000 0x20>; |
| interrupts = <0x8 |
| 0x9>; |
| interrupt-parent = <&mpic>; |
| |
| }; |
| gef_gpio: gpio@7,14000 { |
| #gpio-cells = <2>; |
| compatible = "gef,sbc610-gpio"; |
| reg = <0x7 0x14000 0x24>; |
| gpio-controller; |
| }; |
| }; |
| |
| soc@fef00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| ranges = <0x0 0xfef00000 0x00100000>; |
| reg = <0xfef00000 0x100000>; // CCSRBAR 1M |
| bus-frequency = <33333333>; |
| |
| i2c1: i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <0x2b 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| |
| rtc@51 { |
| compatible = "epson,rx8581"; |
| reg = <0x00000051>; |
| }; |
| |
| eti@6b { |
| compatible = "dallas,ds1682"; |
| reg = <0x6b>; |
| }; |
| }; |
| |
| i2c2: i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <0x2b 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8641-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8641-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8641-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8641-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| ranges = <0x0 0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "gmii"; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x520 0x20>; |
| |
| phy0: ethernet-phy@0 { |
| interrupt-parent = <&gef_pic>; |
| interrupts = <0x9 0x4>; |
| reg = <1>; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&gef_pic>; |
| interrupts = <0x8 0x4>; |
| reg = <3>; |
| }; |
| }; |
| }; |
| |
| enet1: ethernet@26000 { |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x26000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy2>; |
| phy-connection-type = "gmii"; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <0x2a 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <0x1c 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| mpic: pic@40000 { |
| clock-frequency = <0>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| global-utilities@e0000 { |
| compatible = "fsl,mpc8641-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| }; |
| |
| pci0: pcie@fef08000 { |
| compatible = "fsl,mpc8641-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xfef08000 0x1000>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 |
| 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <0x18 0x2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| >; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x02000000 0x0 0x80000000 |
| 0x02000000 0x0 0x80000000 |
| 0x0 0x40000000 |
| |
| 0x01000000 0x0 0x00000000 |
| 0x01000000 0x0 0x00000000 |
| 0x0 0x00400000>; |
| }; |
| }; |
| }; |