lpfc: Use new FDMI speed definitions for 10G, 25G and 40G FCoE.
Use new FDMI speed definitions for 10G, 25G and 40G FCoE.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d9753e3..614f357 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3710,49 +3710,6 @@
}
/**
- * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
- * @phba: pointer to lpfc hba data structure.
- * @acqe_link: pointer to the async link completion queue entry.
- *
- * This routine is to parse the SLI4 link-attention link speed and translate
- * it into the base driver's link-attention link speed coding.
- *
- * Return: Link-attention link speed in terms of base driver's coding.
- **/
-static uint8_t
-lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
- struct lpfc_acqe_link *acqe_link)
-{
- uint8_t link_speed;
-
- switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
- case LPFC_ASYNC_LINK_SPEED_ZERO:
- case LPFC_ASYNC_LINK_SPEED_10MBPS:
- case LPFC_ASYNC_LINK_SPEED_100MBPS:
- link_speed = LPFC_LINK_SPEED_UNKNOWN;
- break;
- case LPFC_ASYNC_LINK_SPEED_1GBPS:
- link_speed = LPFC_LINK_SPEED_1GHZ;
- break;
- case LPFC_ASYNC_LINK_SPEED_10GBPS:
- link_speed = LPFC_LINK_SPEED_10GHZ;
- break;
- case LPFC_ASYNC_LINK_SPEED_20GBPS:
- case LPFC_ASYNC_LINK_SPEED_25GBPS:
- case LPFC_ASYNC_LINK_SPEED_40GBPS:
- link_speed = LPFC_LINK_SPEED_UNKNOWN;
- break;
- default:
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0483 Invalid link-attention link speed: x%x\n",
- bf_get(lpfc_acqe_link_speed, acqe_link));
- link_speed = LPFC_LINK_SPEED_UNKNOWN;
- break;
- }
- return link_speed;
-}
-
-/**
* lpfc_sli_port_speed_get - Get sli3 link speed code to link speed
* @phba: pointer to lpfc hba data structure.
*
@@ -3768,27 +3725,35 @@
if (!lpfc_is_link_up(phba))
return 0;
- switch (phba->fc_linkspeed) {
- case LPFC_LINK_SPEED_1GHZ:
- link_speed = 1000;
- break;
- case LPFC_LINK_SPEED_2GHZ:
- link_speed = 2000;
- break;
- case LPFC_LINK_SPEED_4GHZ:
- link_speed = 4000;
- break;
- case LPFC_LINK_SPEED_8GHZ:
- link_speed = 8000;
- break;
- case LPFC_LINK_SPEED_10GHZ:
- link_speed = 10000;
- break;
- case LPFC_LINK_SPEED_16GHZ:
- link_speed = 16000;
- break;
- default:
- link_speed = 0;
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ switch (phba->fc_linkspeed) {
+ case LPFC_LINK_SPEED_1GHZ:
+ link_speed = 1000;
+ break;
+ case LPFC_LINK_SPEED_2GHZ:
+ link_speed = 2000;
+ break;
+ case LPFC_LINK_SPEED_4GHZ:
+ link_speed = 4000;
+ break;
+ case LPFC_LINK_SPEED_8GHZ:
+ link_speed = 8000;
+ break;
+ case LPFC_LINK_SPEED_10GHZ:
+ link_speed = 10000;
+ break;
+ case LPFC_LINK_SPEED_16GHZ:
+ link_speed = 16000;
+ break;
+ default:
+ link_speed = 0;
+ }
+ } else {
+ if (phba->sli4_hba.link_state.logical_speed)
+ link_speed =
+ phba->sli4_hba.link_state.logical_speed;
+ else
+ link_speed = phba->sli4_hba.link_state.speed;
}
return link_speed;
}
@@ -3984,7 +3949,7 @@
la->eventTag = acqe_link->event_tag;
bf_set(lpfc_mbx_read_top_att_type, la, att_type);
bf_set(lpfc_mbx_read_top_link_spd, la,
- lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
+ (bf_get(lpfc_acqe_link_speed, acqe_link)));
/* Fake the the following irrelvant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);