| /* |
| * linux/include/asm-arm/arch-omap/irqs.h |
| * |
| * Copyright (C) Greg Lonnon 2001 |
| * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 |
| * are different. |
| */ |
| |
| #ifndef __ASM_ARCH_OMAP15XX_IRQS_H |
| #define __ASM_ARCH_OMAP15XX_IRQS_H |
| |
| /* |
| * IRQ numbers for interrupt handler 1 |
| * |
| * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below |
| * |
| */ |
| #define INT_CAMERA 1 |
| #define INT_FIQ 3 |
| #define INT_RTDX 6 |
| #define INT_DSP_MMU_ABORT 7 |
| #define INT_HOST 8 |
| #define INT_ABORT 9 |
| #define INT_BRIDGE_PRIV 13 |
| #define INT_GPIO_BANK1 14 |
| #define INT_UART3 15 |
| #define INT_TIMER3 16 |
| #define INT_DMA_CH0_6 19 |
| #define INT_DMA_CH1_7 20 |
| #define INT_DMA_CH2_8 21 |
| #define INT_DMA_CH3 22 |
| #define INT_DMA_CH4 23 |
| #define INT_DMA_CH5 24 |
| #define INT_DMA_LCD 25 |
| #define INT_TIMER1 26 |
| #define INT_WD_TIMER 27 |
| #define INT_BRIDGE_PUB 28 |
| #define INT_TIMER2 30 |
| #define INT_LCD_CTRL 31 |
| |
| /* |
| * OMAP-1510 specific IRQ numbers for interrupt handler 1 |
| */ |
| #define INT_1510_IH2_IRQ 0 |
| #define INT_1510_RES2 2 |
| #define INT_1510_SPI_TX 4 |
| #define INT_1510_SPI_RX 5 |
| #define INT_1510_DSP_MAILBOX1 10 |
| #define INT_1510_DSP_MAILBOX2 11 |
| #define INT_1510_RES12 12 |
| #define INT_1510_LB_MMU 17 |
| #define INT_1510_RES18 18 |
| #define INT_1510_LOCAL_BUS 29 |
| |
| /* |
| * OMAP-1610 specific IRQ numbers for interrupt handler 1 |
| */ |
| #define INT_1610_IH2_IRQ 0 |
| #define INT_1610_IH2_FIQ 2 |
| #define INT_1610_McBSP2_TX 4 |
| #define INT_1610_McBSP2_RX 5 |
| #define INT_1610_DSP_MAILBOX1 10 |
| #define INT_1610_DSP_MAILBOX2 11 |
| #define INT_1610_LCD_LINE 12 |
| #define INT_1610_GPTIMER1 17 |
| #define INT_1610_GPTIMER2 18 |
| #define INT_1610_SSR_FIFO_0 29 |
| |
| /* |
| * OMAP-730 specific IRQ numbers for interrupt handler 1 |
| */ |
| #define INT_730_IH2_FIQ 0 |
| #define INT_730_IH2_IRQ 1 |
| #define INT_730_USB_NON_ISO 2 |
| #define INT_730_USB_ISO 3 |
| #define INT_730_ICR 4 |
| #define INT_730_EAC 5 |
| #define INT_730_GPIO_BANK1 6 |
| #define INT_730_GPIO_BANK2 7 |
| #define INT_730_GPIO_BANK3 8 |
| #define INT_730_McBSP2TX 10 |
| #define INT_730_McBSP2RX 11 |
| #define INT_730_McBSP2RX_OVF 12 |
| #define INT_730_LCD_LINE 14 |
| #define INT_730_GSM_PROTECT 15 |
| #define INT_730_TIMER3 16 |
| #define INT_730_GPIO_BANK5 17 |
| #define INT_730_GPIO_BANK6 18 |
| #define INT_730_SPGIO_WR 29 |
| |
| /* |
| * IRQ numbers for interrupt handler 2 |
| * |
| * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below |
| */ |
| #define IH2_BASE 32 |
| |
| #define INT_KEYBOARD (1 + IH2_BASE) |
| #define INT_uWireTX (2 + IH2_BASE) |
| #define INT_uWireRX (3 + IH2_BASE) |
| #define INT_I2C (4 + IH2_BASE) |
| #define INT_MPUIO (5 + IH2_BASE) |
| #define INT_USB_HHC_1 (6 + IH2_BASE) |
| #define INT_McBSP3TX (10 + IH2_BASE) |
| #define INT_McBSP3RX (11 + IH2_BASE) |
| #define INT_McBSP1TX (12 + IH2_BASE) |
| #define INT_McBSP1RX (13 + IH2_BASE) |
| #define INT_UART1 (14 + IH2_BASE) |
| #define INT_UART2 (15 + IH2_BASE) |
| #define INT_BT_MCSI1TX (16 + IH2_BASE) |
| #define INT_BT_MCSI1RX (17 + IH2_BASE) |
| #define INT_USB_W2FC (20 + IH2_BASE) |
| #define INT_1WIRE (21 + IH2_BASE) |
| #define INT_OS_TIMER (22 + IH2_BASE) |
| #define INT_MMC (23 + IH2_BASE) |
| #define INT_GAUGE_32K (24 + IH2_BASE) |
| #define INT_RTC_TIMER (25 + IH2_BASE) |
| #define INT_RTC_ALARM (26 + IH2_BASE) |
| #define INT_MEM_STICK (27 + IH2_BASE) |
| |
| /* |
| * OMAP-1510 specific IRQ numbers for interrupt handler 2 |
| */ |
| #define INT_1510_DSP_MMU (28 + IH2_BASE) |
| #define INT_1510_COM_SPI_RO (31 + IH2_BASE) |
| |
| /* |
| * OMAP-1610 specific IRQ numbers for interrupt handler 2 |
| */ |
| #define INT_1610_FAC (0 + IH2_BASE) |
| #define INT_1610_USB_HHC_2 (7 + IH2_BASE) |
| #define INT_1610_USB_OTG (8 + IH2_BASE) |
| #define INT_1610_SoSSI (9 + IH2_BASE) |
| #define INT_1610_SoSSI_MATCH (19 + IH2_BASE) |
| #define INT_1610_DSP_MMU (28 + IH2_BASE) |
| #define INT_1610_McBSP2RX_OF (31 + IH2_BASE) |
| #define INT_1610_STI (32 + IH2_BASE) |
| #define INT_1610_STI_WAKEUP (33 + IH2_BASE) |
| #define INT_1610_GPTIMER3 (34 + IH2_BASE) |
| #define INT_1610_GPTIMER4 (35 + IH2_BASE) |
| #define INT_1610_GPTIMER5 (36 + IH2_BASE) |
| #define INT_1610_GPTIMER6 (37 + IH2_BASE) |
| #define INT_1610_GPTIMER7 (38 + IH2_BASE) |
| #define INT_1610_GPTIMER8 (39 + IH2_BASE) |
| #define INT_1610_GPIO_BANK2 (40 + IH2_BASE) |
| #define INT_1610_GPIO_BANK3 (41 + IH2_BASE) |
| #define INT_1610_MMC2 (42 + IH2_BASE) |
| #define INT_1610_CF (43 + IH2_BASE) |
| #define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) |
| #define INT_1610_GPIO_BANK4 (48 + IH2_BASE) |
| #define INT_1610_SPI (49 + IH2_BASE) |
| #define INT_1610_DMA_CH6 (53 + IH2_BASE) |
| #define INT_1610_DMA_CH7 (54 + IH2_BASE) |
| #define INT_1610_DMA_CH8 (55 + IH2_BASE) |
| #define INT_1610_DMA_CH9 (56 + IH2_BASE) |
| #define INT_1610_DMA_CH10 (57 + IH2_BASE) |
| #define INT_1610_DMA_CH11 (58 + IH2_BASE) |
| #define INT_1610_DMA_CH12 (59 + IH2_BASE) |
| #define INT_1610_DMA_CH13 (60 + IH2_BASE) |
| #define INT_1610_DMA_CH14 (61 + IH2_BASE) |
| #define INT_1610_DMA_CH15 (62 + IH2_BASE) |
| #define INT_1610_NAND (63 + IH2_BASE) |
| |
| /* |
| * OMAP-730 specific IRQ numbers for interrupt handler 2 |
| */ |
| #define INT_730_HW_ERRORS (0 + IH2_BASE) |
| #define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) |
| #define INT_730_CFCD (2 + IH2_BASE) |
| #define INT_730_CFIREQ (3 + IH2_BASE) |
| #define INT_730_I2C (4 + IH2_BASE) |
| #define INT_730_PCC (5 + IH2_BASE) |
| #define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) |
| #define INT_730_SPI_100K_1 (7 + IH2_BASE) |
| #define INT_730_SYREN_SPI (8 + IH2_BASE) |
| #define INT_730_VLYNQ (9 + IH2_BASE) |
| #define INT_730_GPIO_BANK4 (10 + IH2_BASE) |
| #define INT_730_McBSP1TX (11 + IH2_BASE) |
| #define INT_730_McBSP1RX (12 + IH2_BASE) |
| #define INT_730_McBSP1RX_OF (13 + IH2_BASE) |
| #define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) |
| #define INT_730_UART_MODEM_1 (15 + IH2_BASE) |
| #define INT_730_MCSI (16 + IH2_BASE) |
| #define INT_730_uWireTX (17 + IH2_BASE) |
| #define INT_730_uWireRX (18 + IH2_BASE) |
| #define INT_730_SMC_CD (19 + IH2_BASE) |
| #define INT_730_SMC_IREQ (20 + IH2_BASE) |
| #define INT_730_HDQ_1WIRE (21 + IH2_BASE) |
| #define INT_730_TIMER32K (22 + IH2_BASE) |
| #define INT_730_MMC_SDIO (23 + IH2_BASE) |
| #define INT_730_UPLD (24 + IH2_BASE) |
| #define INT_730_USB_HHC_1 (27 + IH2_BASE) |
| #define INT_730_USB_HHC_2 (28 + IH2_BASE) |
| #define INT_730_USB_GENI (29 + IH2_BASE) |
| #define INT_730_USB_OTG (30 + IH2_BASE) |
| #define INT_730_CAMERA_IF (31 + IH2_BASE) |
| #define INT_730_RNG (32 + IH2_BASE) |
| #define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) |
| #define INT_730_DBB_RF_EN (34 + IH2_BASE) |
| #define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) |
| #define INT_730_SHA1_MD5 (36 + IH2_BASE) |
| #define INT_730_SPI_100K_2 (37 + IH2_BASE) |
| #define INT_730_RNG_IDLE (38 + IH2_BASE) |
| #define INT_730_MPUIO (39 + IH2_BASE) |
| #define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) |
| #define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) |
| #define INT_730_LLPC_OE_RISING (42 + IH2_BASE) |
| #define INT_730_LLPC_VSYNC (43 + IH2_BASE) |
| #define INT_730_WAKE_UP_REQ (46 + IH2_BASE) |
| #define INT_730_DMA_CH6 (53 + IH2_BASE) |
| #define INT_730_DMA_CH7 (54 + IH2_BASE) |
| #define INT_730_DMA_CH8 (55 + IH2_BASE) |
| #define INT_730_DMA_CH9 (56 + IH2_BASE) |
| #define INT_730_DMA_CH10 (57 + IH2_BASE) |
| #define INT_730_DMA_CH11 (58 + IH2_BASE) |
| #define INT_730_DMA_CH12 (59 + IH2_BASE) |
| #define INT_730_DMA_CH13 (60 + IH2_BASE) |
| #define INT_730_DMA_CH14 (61 + IH2_BASE) |
| #define INT_730_DMA_CH15 (62 + IH2_BASE) |
| #define INT_730_NAND (63 + IH2_BASE) |
| |
| #define INT_24XX_SYS_NIRQ 7 |
| #define INT_24XX_SDMA_IRQ0 12 |
| #define INT_24XX_SDMA_IRQ1 13 |
| #define INT_24XX_SDMA_IRQ2 14 |
| #define INT_24XX_SDMA_IRQ3 15 |
| #define INT_24XX_CAM_IRQ 24 |
| #define INT_24XX_DSS_IRQ 25 |
| #define INT_24XX_MAIL_U0_MPU 26 |
| #define INT_24XX_DSP_UMA 27 |
| #define INT_24XX_DSP_MMU 28 |
| #define INT_24XX_GPIO_BANK1 29 |
| #define INT_24XX_GPIO_BANK2 30 |
| #define INT_24XX_GPIO_BANK3 31 |
| #define INT_24XX_GPIO_BANK4 32 |
| #define INT_24XX_GPIO_BANK5 33 |
| #define INT_24XX_MAIL_U3_MPU 34 |
| #define INT_24XX_GPTIMER1 37 |
| #define INT_24XX_GPTIMER2 38 |
| #define INT_24XX_GPTIMER3 39 |
| #define INT_24XX_GPTIMER4 40 |
| #define INT_24XX_GPTIMER5 41 |
| #define INT_24XX_GPTIMER6 42 |
| #define INT_24XX_GPTIMER7 43 |
| #define INT_24XX_GPTIMER8 44 |
| #define INT_24XX_GPTIMER9 45 |
| #define INT_24XX_GPTIMER10 46 |
| #define INT_24XX_GPTIMER11 47 |
| #define INT_24XX_GPTIMER12 48 |
| #define INT_24XX_I2C1_IRQ 56 |
| #define INT_24XX_I2C2_IRQ 57 |
| #define INT_24XX_MCBSP1_IRQ_TX 59 |
| #define INT_24XX_MCBSP1_IRQ_RX 60 |
| #define INT_24XX_MCBSP2_IRQ_TX 62 |
| #define INT_24XX_MCBSP2_IRQ_RX 63 |
| #define INT_24XX_UART1_IRQ 72 |
| #define INT_24XX_UART2_IRQ 73 |
| #define INT_24XX_UART3_IRQ 74 |
| #define INT_24XX_USB_IRQ_GEN 75 |
| #define INT_24XX_USB_IRQ_NISO 76 |
| #define INT_24XX_USB_IRQ_ISO 77 |
| #define INT_24XX_USB_IRQ_HGEN 78 |
| #define INT_24XX_USB_IRQ_HSOF 79 |
| #define INT_24XX_USB_IRQ_OTG 80 |
| #define INT_24XX_MMC_IRQ 83 |
| |
| /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and |
| * 16 MPUIO lines */ |
| #define OMAP_MAX_GPIO_LINES 192 |
| #define IH_GPIO_BASE (128 + IH2_BASE) |
| #define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) |
| #define OMAP_IRQ_END (IH_MPUIO_BASE + 16) |
| |
| /* External FPGA handles interrupts on Innovator boards */ |
| #define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) |
| #ifdef CONFIG_MACH_OMAP_INNOVATOR |
| #define OMAP_FPGA_NR_IRQS 24 |
| #else |
| #define OMAP_FPGA_NR_IRQS 0 |
| #endif |
| #define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) |
| |
| /* External TWL4030 can handle interrupts on 2430 and 34xx boards */ |
| #define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) |
| #ifdef CONFIG_TWL4030_CORE |
| #define TWL4030_BASE_NR_IRQS 8 |
| #define TWL4030_PWR_NR_IRQS 8 |
| #else |
| #define TWL4030_BASE_NR_IRQS 0 |
| #define TWL4030_PWR_NR_IRQS 0 |
| #endif |
| #define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) |
| #define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END |
| #define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) |
| |
| /* External TWL4030 gpio interrupts are optional */ |
| #define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END |
| #ifdef CONFIG_TWL4030_GPIO |
| #define TWL4030_GPIO_NR_IRQS 18 |
| #else |
| #define TWL4030_GPIO_NR_IRQS 0 |
| #endif |
| #define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) |
| |
| /* Total number of interrupts depends on the enabled blocks above */ |
| #define NR_IRQS TWL4030_GPIO_IRQ_END |
| |
| #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) |
| |
| #ifndef __ASSEMBLY__ |
| extern void omap_init_irq(void); |
| #endif |
| |
| #include <asm/arch/hardware.h> |
| |
| #endif |