iio:pressure: Changed pressure data variable name to press_data
This patch fix pressure data variable name. Usually pdata name
it is used for platform data.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index b37b1c9..2ff53f2 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -38,10 +38,10 @@
static int st_press_buffer_postenable(struct iio_dev *indio_dev)
{
int err;
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
- pdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (pdata->buffer_data == NULL) {
+ press_data->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (press_data->buffer_data == NULL) {
err = -ENOMEM;
goto allocate_memory_error;
}
@@ -53,7 +53,7 @@
return err;
st_press_buffer_postenable_error:
- kfree(pdata->buffer_data);
+ kfree(press_data->buffer_data);
allocate_memory_error:
return err;
}
@@ -61,7 +61,7 @@
static int st_press_buffer_predisable(struct iio_dev *indio_dev)
{
int err;
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
err = iio_triggered_buffer_predisable(indio_dev);
if (err < 0)
@@ -70,7 +70,7 @@
err = st_sensors_set_enable(indio_dev, false);
st_press_buffer_predisable_error:
- kfree(pdata->buffer_data);
+ kfree(press_data->buffer_data);
return err;
}
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index ee2ef7d..97baf40d 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -333,7 +333,7 @@
int *val2, long mask)
{
int err;
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
@@ -347,10 +347,10 @@
switch (ch->type) {
case IIO_PRESSURE:
- *val2 = pdata->current_fullscale->gain;
+ *val2 = press_data->current_fullscale->gain;
break;
case IIO_TEMP:
- *val2 = pdata->current_fullscale->gain2;
+ *val2 = press_data->current_fullscale->gain2;
break;
default:
err = -EINVAL;
@@ -371,7 +371,7 @@
return IIO_VAL_FRACTIONAL;
case IIO_CHAN_INFO_SAMP_FREQ:
- *val = pdata->odr;
+ *val = press_data->odr;
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -411,8 +411,8 @@
int st_press_common_probe(struct iio_dev *indio_dev)
{
- struct st_sensor_data *pdata = iio_priv(indio_dev);
- int irq = pdata->get_irq_data_ready(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
+ int irq = press_data->get_irq_data_ready(indio_dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -426,23 +426,25 @@
if (err < 0)
return err;
- pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
- pdata->multiread_bit = pdata->sensor_settings->multi_read_bit;
- indio_dev->channels = pdata->sensor_settings->ch;
- indio_dev->num_channels = pdata->sensor_settings->num_ch;
+ press_data->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
+ press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
+ indio_dev->channels = press_data->sensor_settings->ch;
+ indio_dev->num_channels = press_data->sensor_settings->num_ch;
- if (pdata->sensor_settings->fs.addr != 0)
- pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &pdata->sensor_settings->fs.fs_avl[0];
+ if (press_data->sensor_settings->fs.addr != 0)
+ press_data->current_fullscale =
+ (struct st_sensor_fullscale_avl *)
+ &press_data->sensor_settings->fs.fs_avl[0];
- pdata->odr = pdata->sensor_settings->odr.odr_avl[0].hz;
+ press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
/* Some devices don't support a data ready pin. */
- if (!pdata->dev->platform_data && pdata->sensor_settings->drdy_irq.addr)
- pdata->dev->platform_data =
+ if (!press_data->dev->platform_data &&
+ press_data->sensor_settings->drdy_irq.addr)
+ press_data->dev->platform_data =
(struct st_sensors_platform_data *)&default_press_pdata;
- err = st_sensors_init_sensor(indio_dev, pdata->dev->platform_data);
+ err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
if (err < 0)
return err;
@@ -478,12 +480,12 @@
void st_press_common_remove(struct iio_dev *indio_dev)
{
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
st_sensors_power_disable(indio_dev);
iio_device_unregister(indio_dev);
- if (pdata->get_irq_data_ready(indio_dev) > 0)
+ if (press_data->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_press_deallocate_ring(indio_dev);
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index dd73351..8859e93 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -43,18 +43,18 @@
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
- struct st_sensor_data *pdata;
+ struct st_sensor_data *press_data;
int err;
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pdata));
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
if (!indio_dev)
return -ENOMEM;
- pdata = iio_priv(indio_dev);
- pdata->dev = &client->dev;
+ press_data = iio_priv(indio_dev);
+ press_data->dev = &client->dev;
st_sensors_of_i2c_probe(client, st_press_of_match);
- st_sensors_i2c_configure(indio_dev, client, pdata);
+ st_sensors_i2c_configure(indio_dev, client, press_data);
err = st_press_common_probe(indio_dev);
if (err < 0)
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 98c3e8e..10c9624 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -21,17 +21,17 @@
static int st_press_spi_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
- struct st_sensor_data *pdata;
+ struct st_sensor_data *press_data;
int err;
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*pdata));
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data));
if (indio_dev == NULL)
return -ENOMEM;
- pdata = iio_priv(indio_dev);
- pdata->dev = &spi->dev;
+ press_data = iio_priv(indio_dev);
+ press_data->dev = &spi->dev;
- st_sensors_spi_configure(indio_dev, spi, pdata);
+ st_sensors_spi_configure(indio_dev, spi, press_data);
err = st_press_common_probe(indio_dev);
if (err < 0)