[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components
The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files
Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
new file mode 100644
index 0000000..2fbb749
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -0,0 +1,357 @@
+/* linux/arch/arm/plat-s3c24xx/cpu.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/SWLINUX/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-serial.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/s3c2400.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include "s3c244x.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/s3c2442.h>
+
+struct cpu_table {
+ unsigned long idcode;
+ unsigned long idmask;
+ void (*map_io)(struct map_desc *mach_desc, int size);
+ void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+ void (*init_clocks)(int xtal);
+ int (*init)(void);
+ const char *name;
+};
+
+/* table of supported CPUs */
+
+static const char name_s3c2400[] = "S3C2400";
+static const char name_s3c2410[] = "S3C2410";
+static const char name_s3c2412[] = "S3C2412";
+static const char name_s3c2440[] = "S3C2440";
+static const char name_s3c2442[] = "S3C2442";
+static const char name_s3c2410a[] = "S3C2410A";
+static const char name_s3c2440a[] = "S3C2440A";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = 0x32410000,
+ .idmask = 0xffffffff,
+ .map_io = s3c2410_map_io,
+ .init_clocks = s3c2410_init_clocks,
+ .init_uarts = s3c2410_init_uarts,
+ .init = s3c2410_init,
+ .name = name_s3c2410
+ },
+ {
+ .idcode = 0x32410002,
+ .idmask = 0xffffffff,
+ .map_io = s3c2410_map_io,
+ .init_clocks = s3c2410_init_clocks,
+ .init_uarts = s3c2410_init_uarts,
+ .init = s3c2410_init,
+ .name = name_s3c2410a
+ },
+ {
+ .idcode = 0x32440000,
+ .idmask = 0xffffffff,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2440_init,
+ .name = name_s3c2440
+ },
+ {
+ .idcode = 0x32440001,
+ .idmask = 0xffffffff,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2440_init,
+ .name = name_s3c2440a
+ },
+ {
+ .idcode = 0x32440aaa,
+ .idmask = 0xffffffff,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2442_init,
+ .name = name_s3c2442
+ },
+ {
+ .idcode = 0x32412001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+ .init_clocks = s3c2412_init_clocks,
+ .init_uarts = s3c2412_init_uarts,
+ .init = s3c2412_init,
+ .name = name_s3c2412,
+ },
+ { /* a newer version of the s3c2412 */
+ .idcode = 0x32412003,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+ .init_clocks = s3c2412_init_clocks,
+ .init_uarts = s3c2412_init_uarts,
+ .init = s3c2412_init,
+ .name = name_s3c2412,
+ },
+ {
+ .idcode = 0x0, /* S3C2400 doesn't have an idcode */
+ .idmask = 0xffffffff,
+ .map_io = s3c2400_map_io,
+ .init_clocks = s3c2400_init_clocks,
+ .init_uarts = s3c2400_init_uarts,
+ .init = s3c2400_init,
+ .name = name_s3c2400
+ },
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ IODESC_ENT(GPIO),
+ IODESC_ENT(IRQ),
+ IODESC_ENT(MEMCTRL),
+ IODESC_ENT(UART)
+};
+
+
+static struct cpu_table *
+s3c_lookup_cpu(unsigned long idcode)
+{
+ struct cpu_table *tab;
+ int count;
+
+ tab = cpu_ids;
+ for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
+ if ((idcode & tab->idmask) == tab->idcode)
+ return tab;
+ }
+
+ return NULL;
+}
+
+/* board information */
+
+static struct s3c24xx_board *board;
+
+void s3c24xx_set_board(struct s3c24xx_board *b)
+{
+ int i;
+
+ board = b;
+
+ if (b->clocks_count != 0) {
+ struct clk **ptr = b->clocks;
+
+ for (i = b->clocks_count; i > 0; i--, ptr++)
+ s3c24xx_register_clock(*ptr);
+ }
+}
+
+/* cpu information */
+
+static struct cpu_table *cpu;
+
+static unsigned long s3c24xx_read_idcode_v5(void)
+{
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+ return __raw_readl(S3C2412_GSTATUS1);
+#else
+ return 1UL; /* don't look like an 2400 */
+#endif
+}
+
+static unsigned long s3c24xx_read_idcode_v4(void)
+{
+#ifndef CONFIG_CPU_S3C2400
+ return __raw_readl(S3C2410_GSTATUS1);
+#else
+ return 0UL;
+#endif
+}
+
+void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
+{
+ unsigned long idcode = 0x0;
+
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+
+ if (cpu_architecture() >= CPU_ARCH_ARMv5) {
+ idcode = s3c24xx_read_idcode_v5();
+ } else {
+ idcode = s3c24xx_read_idcode_v4();
+ }
+
+ cpu = s3c_lookup_cpu(idcode);
+
+ if (cpu == NULL) {
+ printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+ panic("Unknown S3C24XX CPU");
+ }
+
+ printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+ if (cpu->map_io == NULL || cpu->init == NULL) {
+ printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+ panic("Unsupported S3C24XX CPU");
+ }
+
+ (cpu->map_io)(mach_desc, size);
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal = 0 -> use default PLL crystal value (normally 12MHz)
+ * != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+ if (xtal == 0)
+ xtal = 12*1000*1000;
+
+ if (cpu == NULL)
+ panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+ if (cpu->init_clocks == NULL)
+ panic("s3c24xx_init_clocks: cpu has no clock init\n");
+ else
+ (cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[3];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no)
+{
+ struct platform_device *platdev;
+ struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+ struct s3c24xx_uart_resources *resp;
+ int uart;
+
+ memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+ for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+ platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+ resp = res + cfgptr->hwport;
+
+ s3c24xx_uart_devs[uart] = platdev;
+
+ platdev->name = name;
+ platdev->resource = resp->resources;
+ platdev->num_resources = resp->nr_resources;
+
+ platdev->dev.platform_data = cfgptr;
+ }
+
+ nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ if (cpu == NULL)
+ return;
+
+ if (cpu->init_uarts == NULL) {
+ printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+ } else
+ (cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+ int ret;
+
+ // do the correct init for cpu
+
+ if (cpu == NULL)
+ panic("s3c_arch_init: NULL cpu\n");
+
+ ret = (cpu->init)();
+ if (ret != 0)
+ return ret;
+
+ ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+ if (ret != 0)
+ return ret;
+
+ if (board != NULL) {
+ struct platform_device **ptr = board->devices;
+ int i;
+
+ for (i = 0; i < board->devices_count; i++, ptr++) {
+ ret = platform_device_register(*ptr);
+
+ if (ret) {
+ printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr);
+ }
+ }
+
+ /* mask any error, we may not need all these board
+ * devices */
+ ret = 0;
+ }
+
+ return ret;
+}
+
+arch_initcall(s3c_arch_init);