cfg80211: move regulatory flags to their own variable
We'll expand this later, this will make it easier to
classify and review what things are related to regulatory
or not.
Coccinelle only missed 4 hits, which I had to do manually,
supplying the SmPL in case of merge conflicts.
@@
struct wiphy *wiphy;
@@
-wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY
+wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG
@@
expression e;
@@
-e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY
+e->regulatory_flags |= REGULATORY_CUSTOM_REG
@@
struct wiphy *wiphy;
@@
-wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY
+wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG
@@
struct wiphy *wiphy;
@@
-wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY
+wiphy->regulatory_flags & REGULATORY_CUSTOM_REG
@@
struct wiphy *wiphy;
@@
-wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY
+wiphy->regulatory_flags |= REGULATORY_STRICT_REG
@@
expression e;
@@
-e->flags |= WIPHY_FLAG_STRICT_REGULATORY
+e->regulatory_flags |= REGULATORY_STRICT_REG
@@
struct wiphy *wiphy;
@@
-wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY
+wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG
@@
struct wiphy *wiphy;
@@
-wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY
+wiphy->regulatory_flags & REGULATORY_STRICT_REG
@@
struct wiphy *wiphy;
@@
-wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS
+wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS
@@
expression e;
@@
-e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS
+e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS
@@
struct wiphy *wiphy;
@@
-wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS
+wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS
@@
struct wiphy *wiphy;
@@
-wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS
+wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS
Generated-by: Coccinelle SmPL
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Mihir Shete <smihir@qti.qualcomm.com>
Cc: Henri Bahini <hbahini@qca.qualcomm.com>
Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
[fix up whitespace damage, overly long lines]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index e93e517..aba782c 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -601,7 +601,7 @@
const struct ieee80211_regdomain *regd;
wiphy->reg_notifier = reg_notifier;
- wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
+ wiphy->regulatory_flags |= REGULATORY_STRICT_REG;
if (ath_is_world_regd(reg)) {
/*
@@ -609,7 +609,7 @@
* saved on the wiphy orig_* parameters
*/
regd = ath_world_regdomain(reg);
- wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
} else {
/*
* This gets applied in the case of the absence of CRDA,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index b6a09f9..1850efa 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4341,7 +4341,7 @@
wiphy->max_remain_on_channel_duration = 5000;
brcmf_wiphy_pno_params(wiphy);
brcmf_dbg(INFO, "Registering custom regulatory\n");
- wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(wiphy, &brcmf_regdom);
err = wiphy_register(wiphy);
if (err < 0) {
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 7d8f3fd..ef05df0 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -766,8 +766,8 @@
}
wlc->wiphy->reg_notifier = brcms_reg_notifier;
- wlc->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_STRICT_REGULATORY;
+ wlc->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
+ REGULATORY_STRICT_REG;
wiphy_apply_custom_regulatory(wlc->wiphy, regd->regdomain);
brcms_reg_apply_beaconing_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER);
}
diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index 5a66595..5c3bced 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -3575,9 +3575,9 @@
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |=
- WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
+ REGULATORY_DISABLE_BEACON_HINTS;
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index 1c5f8cd..43f488a 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -5778,9 +5778,9 @@
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |=
- WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
+ REGULATORY_DISABLE_BEACON_HINTS;
/*
* For now, disable PS by default because it affects
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index cae4d31..217f1ca 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -155,9 +155,9 @@
ARRAY_SIZE(iwlagn_iface_combinations_dualmode);
}
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
+ REGULATORY_DISABLE_BEACON_HINTS;
#ifdef CONFIG_PM_SLEEP
if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 74bc2c8..b56c989 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -199,9 +199,9 @@
if (IWL_UCODE_API(mvm->fw->ucode_ver) >= 8)
hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
+ REGULATORY_DISABLE_BEACON_HINTS;
hw->wiphy->iface_combinations = iwl_mvm_iface_combinations;
hw->wiphy->n_iface_combinations =
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 8c7f4ab..bcc7d82 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2456,46 +2456,53 @@
break;
case HWSIM_REGTEST_WORLD_ROAM:
if (i == 0) {
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(hw->wiphy,
&hwsim_world_regdom_custom_01);
}
break;
case HWSIM_REGTEST_CUSTOM_WORLD:
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(hw->wiphy,
&hwsim_world_regdom_custom_01);
break;
case HWSIM_REGTEST_CUSTOM_WORLD_2:
if (i == 0) {
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(hw->wiphy,
&hwsim_world_regdom_custom_01);
} else if (i == 1) {
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(hw->wiphy,
&hwsim_world_regdom_custom_02);
}
break;
case HWSIM_REGTEST_STRICT_ALL:
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
+ hw->wiphy->regulatory_flags |= REGULATORY_STRICT_REG;
break;
case HWSIM_REGTEST_STRICT_FOLLOW:
case HWSIM_REGTEST_STRICT_AND_DRIVER_REG:
if (i == 0)
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_STRICT_REG;
break;
case HWSIM_REGTEST_ALL:
if (i == 0) {
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(hw->wiphy,
&hwsim_world_regdom_custom_01);
} else if (i == 1) {
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_CUSTOM_REG;
wiphy_apply_custom_regulatory(hw->wiphy,
&hwsim_world_regdom_custom_02);
} else if (i == 4)
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
+ hw->wiphy->regulatory_flags |=
+ REGULATORY_STRICT_REG;
break;
default:
break;
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 7f68943..d6d1d91 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2687,9 +2687,10 @@
wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
WIPHY_FLAG_AP_UAPSD |
- WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_STRICT_REGULATORY |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ wiphy->regulatory_flags |=
+ REGULATORY_CUSTOM_REG |
+ REGULATORY_STRICT_REG;
wiphy_apply_custom_regulatory(wiphy, &mwifiex_world_regdom_custom);
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index 8453c53..89e3656 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -344,9 +344,9 @@
wiphy->reg_notifier = reg_notifier;
- wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
- wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY;
- wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS;
+ wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
+ wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG;
+ wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS;
regd = _rtl_regdomain_select(reg);
wiphy_apply_custom_regulatory(wiphy, regd);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 968f2ad..bacc503 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2437,29 +2437,6 @@
/**
* enum wiphy_flags - wiphy capability flags
*
- * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
- * has its own custom regulatory domain and cannot identify the
- * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * we will disregard the first regulatory hint (when the
- * initiator is %REGDOM_SET_BY_CORE). Drivers that use
- * wiphy_apply_custom_regulatory() should have this flag set
- * or the regulatory core will set it for wiphy.
- * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
- * ignore regulatory domain settings until it gets its own regulatory
- * domain via its regulatory_hint() unless the regulatory hint is
- * from a country IE. After its gets its own regulatory domain it will
- * only allow further regulatory domain settings to further enhance
- * compliance. For example if channel 13 and 14 are disabled by this
- * regulatory domain no user regulatory domain can enable these channels
- * at a later time. This can be used for devices which do not have
- * calibration information guaranteed for frequencies or settings
- * outside of its regulatory domain. If used in combination with
- * WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings
- * will be followed.
- * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
- * that passive scan flags and beaconing flags may not be lifted by
- * cfg80211 due to regulatory beacon hints. For more information on beacon
- * hints read the documenation for regulatory_hint_found_beacon()
* @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
* wiphy at all
* @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
@@ -2498,9 +2475,9 @@
* beaconing mode (AP, IBSS, Mesh, ...).
*/
enum wiphy_flags {
- WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
- WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
- WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ /* use hole at 0 */
+ /* use hole at 1 */
+ /* use hole at 2 */
WIPHY_FLAG_NETNS_OK = BIT(3),
WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
WIPHY_FLAG_4ADDR_AP = BIT(5),
@@ -2722,6 +2699,8 @@
* @software_iftypes: bitmask of software interface types, these are not
* subject to any restrictions since they are purely managed in SW.
* @flags: wiphy flags, see &enum wiphy_flags
+ * @regulatory_flags: wiphy regulatory flags, see
+ * &enum ieee80211_regulatory_flags
* @features: features advertised to nl80211, see &enum nl80211_feature_flags.
* @bss_priv_size: each BSS struct has private data allocated with it,
* this variable determines its size
@@ -2810,7 +2789,7 @@
u16 max_acl_mac_addrs;
- u32 flags, features;
+ u32 flags, regulatory_flags, features;
u32 ap_sme_capa;
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index f17ed59..a6a20e2 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -38,17 +38,17 @@
*
* @rcu_head: RCU head struct used to free the request
* @wiphy_idx: this is set if this request's initiator is
- * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
- * can be used by the wireless core to deal with conflicts
- * and potentially inform users of which devices specifically
- * cased the conflicts.
+ * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * can be used by the wireless core to deal with conflicts
+ * and potentially inform users of which devices specifically
+ * cased the conflicts.
* @initiator: indicates who sent this request, could be any of
- * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
* @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
- * regulatory domain. We have a few special codes:
- * 00 - World regulatory domain
- * 99 - built by driver but a specific alpha2 cannot be determined
- * 98 - result of an intersection between two regulatory domains
+ * regulatory domain. We have a few special codes:
+ * 00 - World regulatory domain
+ * 99 - built by driver but a specific alpha2 cannot be determined
+ * 98 - result of an intersection between two regulatory domains
* 97 - regulatory domain has not yet been configured
* @dfs_region: If CRDA responded with a regulatory domain that requires
* DFS master operation on a known DFS region (NL80211_DFS_*),
@@ -59,8 +59,8 @@
* of hint passed. This could be any of the %NL80211_USER_REG_HINT_*
* types.
* @intersect: indicates whether the wireless core should intersect
- * the requested regulatory domain with the presently set regulatory
- * domain.
+ * the requested regulatory domain with the presently set regulatory
+ * domain.
* @processed: indicates whether or not this requests has already been
* processed. When the last request is processed it means that the
* currently regulatory domain set on cfg80211 is updated from
@@ -68,9 +68,9 @@
* the last request is not yet processed we must yield until it
* is processed before processing any new requests.
* @country_ie_checksum: checksum of the last processed and accepted
- * country IE
+ * country IE
* @country_ie_env: lets us know if the AP is telling us we are outdoor,
- * indoor, or if it doesn't matter
+ * indoor, or if it doesn't matter
* @list: used to insert into the reg_requests_list linked list
*/
struct regulatory_request {
@@ -86,6 +86,39 @@
struct list_head list;
};
+/**
+ * enum ieee80211_regulatory_flags - device regulatory flags
+ *
+ * @REGULATORY_CUSTOM_REG: tells us the driver for this device
+ * has its own custom regulatory domain and cannot identify the
+ * ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ * we will disregard the first regulatory hint (when the
+ * initiator is %REGDOM_SET_BY_CORE). Drivers that use
+ * wiphy_apply_custom_regulatory() should have this flag set
+ * or the regulatory core will set it for the wiphy.
+ * @REGULATORY_STRICT_REG: tells us the driver for this device will
+ * ignore regulatory domain settings until it gets its own regulatory
+ * domain via its regulatory_hint() unless the regulatory hint is
+ * from a country IE. After its gets its own regulatory domain it will
+ * only allow further regulatory domain settings to further enhance
+ * compliance. For example if channel 13 and 14 are disabled by this
+ * regulatory domain no user regulatory domain can enable these channels
+ * at a later time. This can be used for devices which do not have
+ * calibration information guaranteed for frequencies or settings
+ * outside of its regulatory domain. If used in combination with
+ * REGULATORY_FLAG_CUSTOM_REG the inspected country IE power settings
+ * will be followed.
+ * @REGULATORY_DISABLE_BEACON_HINTS: enable this if your driver needs to
+ * ensure that passive scan flags and beaconing flags may not be lifted by
+ * cfg80211 due to regulatory beacon hints. For more information on beacon
+ * hints read the documenation for regulatory_hint_found_beacon()
+ */
+enum ieee80211_regulatory_flags {
+ REGULATORY_CUSTOM_REG = BIT(0),
+ REGULATORY_STRICT_REG = BIT(1),
+ REGULATORY_DISABLE_BEACON_HINTS = BIT(2),
+};
+
struct ieee80211_freq_range {
u32 start_freq_khz;
u32 end_freq_khz;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 9dca092..fc968c8 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -586,7 +586,7 @@
if (IS_ERR(rdev->wiphy.debugfsdir))
rdev->wiphy.debugfsdir = NULL;
- if (wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
+ if (wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) {
struct regulatory_request request;
request.wiphy_idx = get_wiphy_idx(wiphy);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index a75c5ed..e44b4bb 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -868,7 +868,7 @@
if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
request_wiphy && request_wiphy == wiphy &&
- request_wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) {
+ request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
REG_DBG_PRINT("Disabling freq %d MHz for good\n",
chan->center_freq);
chan->orig_flags |= IEEE80211_CHAN_DISABLED;
@@ -895,7 +895,7 @@
if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
request_wiphy && request_wiphy == wiphy &&
- request_wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) {
+ request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
/*
* This guarantees the driver's requested regulatory domain
* will always be used as a base for further regulatory
@@ -922,12 +922,12 @@
if (chan->orig_mpwr) {
/*
* Devices that have their own custom regulatory domain
- * but also use WIPHY_FLAG_STRICT_REGULATORY will follow the
+ * but also use REGULATORY_STRICT_REG will follow the
* passed country IE power settings.
*/
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
- wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY &&
- wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
+ wiphy->regulatory_flags & REGULATORY_CUSTOM_REG &&
+ wiphy->regulatory_flags & REGULATORY_STRICT_REG)
chan->max_power = chan->max_reg_power;
else
chan->max_power = min(chan->orig_mpwr,
@@ -997,8 +997,8 @@
static bool wiphy_strict_alpha2_regd(struct wiphy *wiphy)
{
- if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY &&
- !(wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY))
+ if (wiphy->regulatory_flags & REGULATORY_STRICT_REG &&
+ !(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG))
return true;
return false;
}
@@ -1016,7 +1016,7 @@
}
if (initiator == NL80211_REGDOM_SET_BY_CORE &&
- wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
+ wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) {
REG_DBG_PRINT("Ignoring regulatory request set by %s "
"since the driver uses its own custom "
"regulatory domain\n",
@@ -1054,7 +1054,7 @@
return true;
if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
- wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY)
+ wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)
return true;
return false;
@@ -1082,7 +1082,7 @@
if (!reg_is_world_roaming(wiphy))
return;
- if (wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS)
+ if (wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS)
return;
chan_before.center_freq = chan->center_freq;
@@ -1242,7 +1242,7 @@
* as some drivers used this to restore its orig_* reg domain.
*/
if (initiator == NL80211_REGDOM_SET_BY_CORE &&
- wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY)
+ wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)
reg_call_notifier(wiphy, lr);
return;
}
@@ -1328,9 +1328,9 @@
enum ieee80211_band band;
unsigned int bands_set = 0;
- WARN(!(wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY),
- "wiphy should have WIPHY_FLAG_CUSTOM_REGULATORY\n");
- wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+ WARN(!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG),
+ "wiphy should have REGULATORY_CUSTOM_REG\n");
+ wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!wiphy->bands[band])
@@ -1659,7 +1659,7 @@
/* This is required so that the orig_* parameters are saved */
if (treatment == REG_REQ_ALREADY_SET && wiphy &&
- wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
+ wiphy->regulatory_flags & REGULATORY_STRICT_REG)
wiphy_update_regulatory(wiphy, reg_request->initiator);
}
@@ -1986,7 +1986,7 @@
world_alpha2[1] = cfg80211_world_regdom->alpha2[1];
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
- if (rdev->wiphy.flags & WIPHY_FLAG_CUSTOM_REGULATORY)
+ if (rdev->wiphy.regulatory_flags & REGULATORY_CUSTOM_REG)
restore_custom_reg_settings(&rdev->wiphy);
}