| /* |
| * OLPC HGPK (XO-1) touchpad PS/2 mouse driver |
| * |
| * Copyright (c) 2006-2008 One Laptop Per Child |
| * Authors: |
| * Zephaniah E. Hull |
| * Andres Salomon <dilinger@debian.org> |
| * |
| * This driver is partly based on the ALPS driver, which is: |
| * |
| * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au> |
| * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com> |
| * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru> |
| * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* |
| * The spec from ALPS is available from |
| * <http://wiki.laptop.org/go/Touch_Pad/Tablet>. It refers to this |
| * device as HGPK (Hybrid GS, PT, and Keymatrix). |
| * |
| * The earliest versions of the device had simultaneous reporting; that |
| * was removed. After that, the device used the Advanced Mode GS/PT streaming |
| * stuff. That turned out to be too buggy to support, so we've finally |
| * switched to Mouse Mode (which utilizes only the center 1/3 of the touchpad). |
| */ |
| |
| #define DEBUG |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| #include <linux/libps2.h> |
| #include <linux/delay.h> |
| #include <asm/olpc.h> |
| |
| #include "psmouse.h" |
| #include "hgpk.h" |
| |
| #define ILLEGAL_XY 999999 |
| |
| static bool tpdebug; |
| module_param(tpdebug, bool, 0644); |
| MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG."); |
| |
| static int recalib_delta = 100; |
| module_param(recalib_delta, int, 0644); |
| MODULE_PARM_DESC(recalib_delta, |
| "packets containing a delta this large will be discarded, and a " |
| "recalibration may be scheduled."); |
| |
| static int jumpy_delay = 20; |
| module_param(jumpy_delay, int, 0644); |
| MODULE_PARM_DESC(jumpy_delay, |
| "delay (ms) before recal after jumpiness detected"); |
| |
| static int spew_delay = 1; |
| module_param(spew_delay, int, 0644); |
| MODULE_PARM_DESC(spew_delay, |
| "delay (ms) before recal after packet spew detected"); |
| |
| static int recal_guard_time = 2000; |
| module_param(recal_guard_time, int, 0644); |
| MODULE_PARM_DESC(recal_guard_time, |
| "interval (ms) during which recal will be restarted if packet received"); |
| |
| static int post_interrupt_delay = 1000; |
| module_param(post_interrupt_delay, int, 0644); |
| MODULE_PARM_DESC(post_interrupt_delay, |
| "delay (ms) before recal after recal interrupt detected"); |
| |
| static char hgpk_mode_name[16]; |
| module_param_string(hgpk_mode, hgpk_mode_name, sizeof(hgpk_mode_name), 0644); |
| MODULE_PARM_DESC(hgpk_mode, |
| "default hgpk mode: mouse, glidesensor or pentablet"); |
| |
| static int hgpk_default_mode = HGPK_MODE_MOUSE; |
| |
| static const char * const hgpk_mode_names[] = { |
| [HGPK_MODE_MOUSE] = "Mouse", |
| [HGPK_MODE_GLIDESENSOR] = "GlideSensor", |
| [HGPK_MODE_PENTABLET] = "PenTablet", |
| }; |
| |
| static int hgpk_mode_from_name(const char *buf, int len) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hgpk_mode_names); i++) { |
| const char *name = hgpk_mode_names[i]; |
| if (strlen(name) == len && !strncasecmp(name, buf, len)) |
| return i; |
| } |
| |
| return HGPK_MODE_INVALID; |
| } |
| |
| /* |
| * see if new value is within 20% of half of old value |
| */ |
| static int approx_half(int curr, int prev) |
| { |
| int belowhalf, abovehalf; |
| |
| if (curr < 5 || prev < 5) |
| return 0; |
| |
| belowhalf = (prev * 8) / 20; |
| abovehalf = (prev * 12) / 20; |
| |
| return belowhalf < curr && curr <= abovehalf; |
| } |
| |
| /* |
| * Throw out oddly large delta packets, and any that immediately follow whose |
| * values are each approximately half of the previous. It seems that the ALPS |
| * firmware emits errant packets, and they get averaged out slowly. |
| */ |
| static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| int avx, avy; |
| bool do_recal = false; |
| |
| avx = abs(x); |
| avy = abs(y); |
| |
| /* discard if too big, or half that but > 4 times the prev delta */ |
| if (avx > recalib_delta || |
| (avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) { |
| hgpk_err(psmouse, "detected %dpx jump in x\n", x); |
| priv->xbigj = avx; |
| } else if (approx_half(avx, priv->xbigj)) { |
| hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x); |
| priv->xbigj = avx; |
| priv->xsaw_secondary++; |
| } else { |
| if (priv->xbigj && priv->xsaw_secondary > 1) |
| do_recal = true; |
| priv->xbigj = 0; |
| priv->xsaw_secondary = 0; |
| } |
| |
| if (avy > recalib_delta || |
| (avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) { |
| hgpk_err(psmouse, "detected %dpx jump in y\n", y); |
| priv->ybigj = avy; |
| } else if (approx_half(avy, priv->ybigj)) { |
| hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y); |
| priv->ybigj = avy; |
| priv->ysaw_secondary++; |
| } else { |
| if (priv->ybigj && priv->ysaw_secondary > 1) |
| do_recal = true; |
| priv->ybigj = 0; |
| priv->ysaw_secondary = 0; |
| } |
| |
| priv->xlast = avx; |
| priv->ylast = avy; |
| |
| if (do_recal && jumpy_delay) { |
| hgpk_err(psmouse, "scheduling recalibration\n"); |
| psmouse_queue_work(psmouse, &priv->recalib_wq, |
| msecs_to_jiffies(jumpy_delay)); |
| } |
| |
| return priv->xbigj || priv->ybigj; |
| } |
| |
| static void hgpk_reset_spew_detection(struct hgpk_data *priv) |
| { |
| priv->spew_count = 0; |
| priv->dupe_count = 0; |
| priv->x_tally = 0; |
| priv->y_tally = 0; |
| priv->spew_flag = NO_SPEW; |
| } |
| |
| static void hgpk_reset_hack_state(struct psmouse *psmouse) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| |
| priv->abs_x = priv->abs_y = -1; |
| priv->xlast = priv->ylast = ILLEGAL_XY; |
| priv->xbigj = priv->ybigj = 0; |
| priv->xsaw_secondary = priv->ysaw_secondary = 0; |
| hgpk_reset_spew_detection(priv); |
| } |
| |
| /* |
| * We have no idea why this particular hardware bug occurs. The touchpad |
| * will randomly start spewing packets without anything touching the |
| * pad. This wouldn't necessarily be bad, but it's indicative of a |
| * severely miscalibrated pad; attempting to use the touchpad while it's |
| * spewing means the cursor will jump all over the place, and act "drunk". |
| * |
| * The packets that are spewed tend to all have deltas between -2 and 2, and |
| * the cursor will move around without really going very far. It will |
| * tend to end up in the same location; if we tally up the changes over |
| * 100 packets, we end up w/ a final delta of close to 0. This happens |
| * pretty regularly when the touchpad is spewing, and is pretty hard to |
| * manually trigger (at least for *my* fingers). So, it makes a perfect |
| * scheme for detecting spews. |
| */ |
| static void hgpk_spewing_hack(struct psmouse *psmouse, |
| int l, int r, int x, int y) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| |
| /* ignore button press packets; many in a row could trigger |
| * a false-positive! */ |
| if (l || r) |
| return; |
| |
| /* don't track spew if the workaround feature has been turned off */ |
| if (!spew_delay) |
| return; |
| |
| if (abs(x) > 3 || abs(y) > 3) { |
| /* no spew, or spew ended */ |
| hgpk_reset_spew_detection(priv); |
| return; |
| } |
| |
| /* Keep a tally of the overall delta to the cursor position caused by |
| * the spew */ |
| priv->x_tally += x; |
| priv->y_tally += y; |
| |
| switch (priv->spew_flag) { |
| case NO_SPEW: |
| /* we're not spewing, but this packet might be the start */ |
| priv->spew_flag = MAYBE_SPEWING; |
| |
| /* fall-through */ |
| |
| case MAYBE_SPEWING: |
| priv->spew_count++; |
| |
| if (priv->spew_count < SPEW_WATCH_COUNT) |
| break; |
| |
| /* excessive spew detected, request recalibration */ |
| priv->spew_flag = SPEW_DETECTED; |
| |
| /* fall-through */ |
| |
| case SPEW_DETECTED: |
| /* only recalibrate when the overall delta to the cursor |
| * is really small. if the spew is causing significant cursor |
| * movement, it is probably a case of the user moving the |
| * cursor very slowly across the screen. */ |
| if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) { |
| hgpk_err(psmouse, "packet spew detected (%d,%d)\n", |
| priv->x_tally, priv->y_tally); |
| priv->spew_flag = RECALIBRATING; |
| psmouse_queue_work(psmouse, &priv->recalib_wq, |
| msecs_to_jiffies(spew_delay)); |
| } |
| |
| break; |
| case RECALIBRATING: |
| /* we already detected a spew and requested a recalibration, |
| * just wait for the queue to kick into action. */ |
| break; |
| } |
| } |
| |
| /* |
| * HGPK Mouse Mode format (standard mouse format, sans middle button) |
| * |
| * byte 0: y-over x-over y-neg x-neg 1 0 swr swl |
| * byte 1: x7 x6 x5 x4 x3 x2 x1 x0 |
| * byte 2: y7 y6 y5 y4 y3 y2 y1 y0 |
| * |
| * swr/swl are the left/right buttons. |
| * x-neg/y-neg are the x and y delta negative bits |
| * x-over/y-over are the x and y overflow bits |
| * |
| * --- |
| * |
| * HGPK Advanced Mode - single-mode format |
| * |
| * byte 0(PT): 1 1 0 0 1 1 1 1 |
| * byte 0(GS): 1 1 1 1 1 1 1 1 |
| * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 |
| * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw 0 |
| * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw |
| * byte 3: 0 y9 y8 y7 1 0 swr swl |
| * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 |
| * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 |
| * |
| * ?'s are not defined in the protocol spec, may vary between models. |
| * |
| * swr/swl are the left/right buttons. |
| * |
| * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a |
| * pen/finger |
| */ |
| static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| int pktcnt = psmouse->pktcnt; |
| bool valid; |
| |
| switch (priv->mode) { |
| case HGPK_MODE_MOUSE: |
| valid = (packet[0] & 0x0C) == 0x08; |
| break; |
| |
| case HGPK_MODE_GLIDESENSOR: |
| valid = pktcnt == 1 ? |
| packet[0] == HGPK_GS : !(packet[pktcnt - 1] & 0x80); |
| break; |
| |
| case HGPK_MODE_PENTABLET: |
| valid = pktcnt == 1 ? |
| packet[0] == HGPK_PT : !(packet[pktcnt - 1] & 0x80); |
| break; |
| |
| default: |
| valid = false; |
| break; |
| } |
| |
| if (!valid) |
| hgpk_dbg(psmouse, |
| "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n", |
| priv->mode, pktcnt, |
| psmouse->packet[0], psmouse->packet[1], |
| psmouse->packet[2], psmouse->packet[3], |
| psmouse->packet[4], psmouse->packet[5]); |
| |
| return valid; |
| } |
| |
| static void hgpk_process_advanced_packet(struct psmouse *psmouse) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| struct input_dev *idev = psmouse->dev; |
| unsigned char *packet = psmouse->packet; |
| int down = !!(packet[2] & 2); |
| int left = !!(packet[3] & 1); |
| int right = !!(packet[3] & 2); |
| int x = packet[1] | ((packet[2] & 0x78) << 4); |
| int y = packet[4] | ((packet[3] & 0x70) << 3); |
| |
| if (priv->mode == HGPK_MODE_GLIDESENSOR) { |
| int pt_down = !!(packet[2] & 1); |
| int finger_down = !!(packet[2] & 2); |
| int z = packet[5]; |
| |
| input_report_abs(idev, ABS_PRESSURE, z); |
| if (tpdebug) |
| hgpk_dbg(psmouse, "pd=%d fd=%d z=%d", |
| pt_down, finger_down, z); |
| } else { |
| /* |
| * PenTablet mode does not report pressure, so we don't |
| * report it here |
| */ |
| if (tpdebug) |
| hgpk_dbg(psmouse, "pd=%d ", down); |
| } |
| |
| if (tpdebug) |
| hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); |
| |
| input_report_key(idev, BTN_TOUCH, down); |
| input_report_key(idev, BTN_LEFT, left); |
| input_report_key(idev, BTN_RIGHT, right); |
| |
| /* |
| * If this packet says that the finger was removed, reset our position |
| * tracking so that we don't erroneously detect a jump on next press. |
| */ |
| if (!down) { |
| hgpk_reset_hack_state(psmouse); |
| goto done; |
| } |
| |
| /* |
| * Weed out duplicate packets (we get quite a few, and they mess up |
| * our jump detection) |
| */ |
| if (x == priv->abs_x && y == priv->abs_y) { |
| if (++priv->dupe_count > SPEW_WATCH_COUNT) { |
| if (tpdebug) |
| hgpk_dbg(psmouse, "hard spew detected\n"); |
| priv->spew_flag = RECALIBRATING; |
| psmouse_queue_work(psmouse, &priv->recalib_wq, |
| msecs_to_jiffies(spew_delay)); |
| } |
| goto done; |
| } |
| |
| /* not a duplicate, continue with position reporting */ |
| priv->dupe_count = 0; |
| |
| /* Don't apply hacks in PT mode, it seems reliable */ |
| if (priv->mode != HGPK_MODE_PENTABLET && priv->abs_x != -1) { |
| int x_diff = priv->abs_x - x; |
| int y_diff = priv->abs_y - y; |
| if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) { |
| if (tpdebug) |
| hgpk_dbg(psmouse, "discarding\n"); |
| goto done; |
| } |
| hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff); |
| } |
| |
| input_report_abs(idev, ABS_X, x); |
| input_report_abs(idev, ABS_Y, y); |
| priv->abs_x = x; |
| priv->abs_y = y; |
| |
| done: |
| input_sync(idev); |
| } |
| |
| static void hgpk_process_simple_packet(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| unsigned char *packet = psmouse->packet; |
| int left = packet[0] & 1; |
| int right = (packet[0] >> 1) & 1; |
| int x = packet[1] - ((packet[0] << 4) & 0x100); |
| int y = ((packet[0] << 3) & 0x100) - packet[2]; |
| |
| if (hgpk_discard_decay_hack(psmouse, x, y)) { |
| if (tpdebug) |
| hgpk_dbg(psmouse, "discarding\n"); |
| return; |
| } |
| |
| hgpk_spewing_hack(psmouse, left, right, x, y); |
| |
| if (tpdebug) |
| hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); |
| |
| input_report_key(dev, BTN_LEFT, left); |
| input_report_key(dev, BTN_RIGHT, right); |
| |
| input_report_rel(dev, REL_X, x); |
| input_report_rel(dev, REL_Y, y); |
| |
| input_sync(dev); |
| } |
| |
| static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| |
| if (!hgpk_is_byte_valid(psmouse, psmouse->packet)) |
| return PSMOUSE_BAD_DATA; |
| |
| if (psmouse->pktcnt >= psmouse->pktsize) { |
| if (priv->mode == HGPK_MODE_MOUSE) |
| hgpk_process_simple_packet(psmouse); |
| else |
| hgpk_process_advanced_packet(psmouse); |
| return PSMOUSE_FULL_PACKET; |
| } |
| |
| if (priv->recalib_window) { |
| if (time_before(jiffies, priv->recalib_window)) { |
| /* |
| * ugh, got a packet inside our recalibration |
| * window, schedule another recalibration. |
| */ |
| hgpk_dbg(psmouse, |
| "packet inside calibration window, " |
| "queueing another recalibration\n"); |
| psmouse_queue_work(psmouse, &priv->recalib_wq, |
| msecs_to_jiffies(post_interrupt_delay)); |
| } |
| priv->recalib_window = 0; |
| } |
| |
| return PSMOUSE_GOOD_DATA; |
| } |
| |
| static int hgpk_select_mode(struct psmouse *psmouse) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| struct hgpk_data *priv = psmouse->private; |
| int i; |
| int cmd; |
| |
| /* |
| * 4 disables to enable advanced mode |
| * then 3 0xf2 bytes as the preamble for GS/PT selection |
| */ |
| const int advanced_init[] = { |
| PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE, |
| PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE, |
| 0xf2, 0xf2, 0xf2, |
| }; |
| |
| switch (priv->mode) { |
| case HGPK_MODE_MOUSE: |
| psmouse->pktsize = 3; |
| break; |
| |
| case HGPK_MODE_GLIDESENSOR: |
| case HGPK_MODE_PENTABLET: |
| psmouse->pktsize = 6; |
| |
| /* Switch to 'Advanced mode.', four disables in a row. */ |
| for (i = 0; i < ARRAY_SIZE(advanced_init); i++) |
| if (ps2_command(ps2dev, NULL, advanced_init[i])) |
| return -EIO; |
| |
| /* select between GlideSensor (mouse) or PenTablet */ |
| cmd = priv->mode == HGPK_MODE_GLIDESENSOR ? |
| PSMOUSE_CMD_SETSCALE11 : PSMOUSE_CMD_SETSCALE21; |
| |
| if (ps2_command(ps2dev, NULL, cmd)) |
| return -EIO; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void hgpk_setup_input_device(struct input_dev *input, |
| struct input_dev *old_input, |
| enum hgpk_mode mode) |
| { |
| if (old_input) { |
| input->name = old_input->name; |
| input->phys = old_input->phys; |
| input->id = old_input->id; |
| input->dev.parent = old_input->dev.parent; |
| } |
| |
| memset(input->evbit, 0, sizeof(input->evbit)); |
| memset(input->relbit, 0, sizeof(input->relbit)); |
| memset(input->keybit, 0, sizeof(input->keybit)); |
| |
| /* All modes report left and right buttons */ |
| __set_bit(EV_KEY, input->evbit); |
| __set_bit(BTN_LEFT, input->keybit); |
| __set_bit(BTN_RIGHT, input->keybit); |
| |
| switch (mode) { |
| case HGPK_MODE_MOUSE: |
| __set_bit(EV_REL, input->evbit); |
| __set_bit(REL_X, input->relbit); |
| __set_bit(REL_Y, input->relbit); |
| break; |
| |
| case HGPK_MODE_GLIDESENSOR: |
| __set_bit(BTN_TOUCH, input->keybit); |
| __set_bit(BTN_TOOL_FINGER, input->keybit); |
| |
| __set_bit(EV_ABS, input->evbit); |
| |
| /* GlideSensor has pressure sensor, PenTablet does not */ |
| input_set_abs_params(input, ABS_PRESSURE, 0, 15, 0, 0); |
| |
| /* From device specs */ |
| input_set_abs_params(input, ABS_X, 0, 399, 0, 0); |
| input_set_abs_params(input, ABS_Y, 0, 290, 0, 0); |
| |
| /* Calculated by hand based on usable size (52mm x 38mm) */ |
| input_abs_set_res(input, ABS_X, 8); |
| input_abs_set_res(input, ABS_Y, 8); |
| break; |
| |
| case HGPK_MODE_PENTABLET: |
| __set_bit(BTN_TOUCH, input->keybit); |
| __set_bit(BTN_TOOL_FINGER, input->keybit); |
| |
| __set_bit(EV_ABS, input->evbit); |
| |
| /* From device specs */ |
| input_set_abs_params(input, ABS_X, 0, 999, 0, 0); |
| input_set_abs_params(input, ABS_Y, 5, 239, 0, 0); |
| |
| /* Calculated by hand based on usable size (156mm x 38mm) */ |
| input_abs_set_res(input, ABS_X, 6); |
| input_abs_set_res(input, ABS_Y, 8); |
| break; |
| |
| default: |
| BUG(); |
| } |
| } |
| |
| static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate) |
| { |
| int err; |
| |
| psmouse_reset(psmouse); |
| |
| if (recalibrate) { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| |
| /* send the recalibrate request */ |
| if (ps2_command(ps2dev, NULL, 0xf5) || |
| ps2_command(ps2dev, NULL, 0xf5) || |
| ps2_command(ps2dev, NULL, 0xe6) || |
| ps2_command(ps2dev, NULL, 0xf5)) { |
| return -1; |
| } |
| |
| /* according to ALPS, 150mS is required for recalibration */ |
| msleep(150); |
| } |
| |
| err = hgpk_select_mode(psmouse); |
| if (err) { |
| hgpk_err(psmouse, "failed to select mode\n"); |
| return err; |
| } |
| |
| hgpk_reset_hack_state(psmouse); |
| |
| return 0; |
| } |
| |
| static int hgpk_force_recalibrate(struct psmouse *psmouse) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| struct hgpk_data *priv = psmouse->private; |
| int err; |
| |
| /* C-series touchpads added the recalibrate command */ |
| if (psmouse->model < HGPK_MODEL_C) |
| return 0; |
| |
| /* we don't want to race with the irq handler, nor with resyncs */ |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); |
| |
| /* start by resetting the device */ |
| err = hgpk_reset_device(psmouse, true); |
| if (err) |
| return err; |
| |
| /* |
| * XXX: If a finger is down during this delay, recalibration will |
| * detect capacitance incorrectly. This is a hardware bug, and |
| * we don't have a good way to deal with it. The 2s window stuff |
| * (below) is our best option for now. |
| */ |
| |
| if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) |
| return -1; |
| |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); |
| |
| /* |
| * After we recalibrate, we shouldn't get any packets for 2s. If |
| * we do, it's likely that someone's finger was on the touchpad. |
| * If someone's finger *was* on the touchpad, it's probably |
| * miscalibrated. So, we should schedule another recalibration |
| */ |
| priv->recalib_window = jiffies + msecs_to_jiffies(recal_guard_time); |
| |
| return 0; |
| } |
| |
| /* |
| * This kills power to the touchpad; according to ALPS, current consumption |
| * goes down to 50uA after running this. To turn power back on, we drive |
| * MS-DAT low. |
| */ |
| static int hgpk_toggle_power(struct psmouse *psmouse, int enable) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| int timeo; |
| int err; |
| |
| /* Added on D-series touchpads */ |
| if (psmouse->model < HGPK_MODEL_D) |
| return 0; |
| |
| if (enable) { |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); |
| |
| /* |
| * Sending a byte will drive MS-DAT low; this will wake up |
| * the controller. Once we get an ACK back from it, it |
| * means we can continue with the touchpad re-init. ALPS |
| * tells us that 1s should be long enough, so set that as |
| * the upper bound. |
| */ |
| for (timeo = 20; timeo > 0; timeo--) { |
| if (!ps2_sendbyte(&psmouse->ps2dev, |
| PSMOUSE_CMD_DISABLE, 20)) |
| break; |
| msleep(50); |
| } |
| |
| err = hgpk_reset_device(psmouse, false); |
| if (err) { |
| hgpk_err(psmouse, "Failed to reset device!\n"); |
| return err; |
| } |
| |
| /* should be all set, enable the touchpad */ |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); |
| |
| } else { |
| hgpk_dbg(psmouse, "Powering off touchpad.\n"); |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); |
| |
| if (ps2_command(ps2dev, NULL, 0xec) || |
| ps2_command(ps2dev, NULL, 0xec) || |
| ps2_command(ps2dev, NULL, 0xea)) { |
| return -1; |
| } |
| |
| /* probably won't see an ACK, the touchpad will be off */ |
| ps2_sendbyte(&psmouse->ps2dev, 0xec, 20); |
| } |
| |
| return 0; |
| } |
| |
| static int hgpk_poll(struct psmouse *psmouse) |
| { |
| /* We can't poll, so always return failure. */ |
| return -1; |
| } |
| |
| static int hgpk_reconnect(struct psmouse *psmouse) |
| { |
| /* |
| * During suspend/resume the ps2 rails remain powered. We don't want |
| * to do a reset because it's flush data out of buffers; however, |
| * earlier prototypes (B1) had some brokenness that required a reset. |
| */ |
| if (olpc_board_at_least(olpc_board(0xb2))) |
| if (psmouse->ps2dev.serio->dev.power.power_state.event != |
| PM_EVENT_ON) |
| return 0; |
| |
| return hgpk_reset_device(psmouse, false); |
| } |
| |
| static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| |
| return sprintf(buf, "%d\n", priv->powered); |
| } |
| |
| static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, |
| const char *buf, size_t count) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| unsigned long value; |
| int err; |
| |
| err = strict_strtoul(buf, 10, &value); |
| if (err || value > 1) |
| return -EINVAL; |
| |
| if (value != priv->powered) { |
| /* |
| * hgpk_toggle_power will deal w/ state so |
| * we're not racing w/ irq |
| */ |
| err = hgpk_toggle_power(psmouse, value); |
| if (!err) |
| priv->powered = value; |
| } |
| |
| return err ? err : count; |
| } |
| |
| __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL, |
| hgpk_show_powered, hgpk_set_powered, false); |
| |
| static ssize_t attr_show_mode(struct psmouse *psmouse, void *data, char *buf) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| |
| return sprintf(buf, "%s\n", hgpk_mode_names[priv->mode]); |
| } |
| |
| static ssize_t attr_set_mode(struct psmouse *psmouse, void *data, |
| const char *buf, size_t len) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| enum hgpk_mode old_mode = priv->mode; |
| enum hgpk_mode new_mode = hgpk_mode_from_name(buf, len); |
| struct input_dev *old_dev = psmouse->dev; |
| struct input_dev *new_dev; |
| int err; |
| |
| if (new_mode == HGPK_MODE_INVALID) |
| return -EINVAL; |
| |
| if (old_mode == new_mode) |
| return len; |
| |
| new_dev = input_allocate_device(); |
| if (!new_dev) |
| return -ENOMEM; |
| |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); |
| |
| /* Switch device into the new mode */ |
| priv->mode = new_mode; |
| err = hgpk_reset_device(psmouse, false); |
| if (err) |
| goto err_try_restore; |
| |
| hgpk_setup_input_device(new_dev, old_dev, new_mode); |
| |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); |
| |
| err = input_register_device(new_dev); |
| if (err) |
| goto err_try_restore; |
| |
| psmouse->dev = new_dev; |
| input_unregister_device(old_dev); |
| |
| return len; |
| |
| err_try_restore: |
| input_free_device(new_dev); |
| priv->mode = old_mode; |
| hgpk_reset_device(psmouse, false); |
| |
| return err; |
| } |
| |
| PSMOUSE_DEFINE_ATTR(hgpk_mode, S_IWUSR | S_IRUGO, NULL, |
| attr_show_mode, attr_set_mode); |
| |
| static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse, |
| void *data, char *buf) |
| { |
| return -EINVAL; |
| } |
| |
| static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data, |
| const char *buf, size_t count) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| unsigned long value; |
| int err; |
| |
| err = strict_strtoul(buf, 10, &value); |
| if (err || value != 1) |
| return -EINVAL; |
| |
| /* |
| * We queue work instead of doing recalibration right here |
| * to avoid adding locking to to hgpk_force_recalibrate() |
| * since workqueue provides serialization. |
| */ |
| psmouse_queue_work(psmouse, &priv->recalib_wq, 0); |
| return count; |
| } |
| |
| __PSMOUSE_DEFINE_ATTR(recalibrate, S_IWUSR | S_IRUGO, NULL, |
| hgpk_trigger_recal_show, hgpk_trigger_recal, false); |
| |
| static void hgpk_disconnect(struct psmouse *psmouse) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| |
| device_remove_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_powered.dattr); |
| device_remove_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_hgpk_mode.dattr); |
| |
| if (psmouse->model >= HGPK_MODEL_C) |
| device_remove_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_recalibrate.dattr); |
| |
| psmouse_reset(psmouse); |
| kfree(priv); |
| } |
| |
| static void hgpk_recalib_work(struct work_struct *work) |
| { |
| struct delayed_work *w = to_delayed_work(work); |
| struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq); |
| struct psmouse *psmouse = priv->psmouse; |
| |
| hgpk_dbg(psmouse, "recalibrating touchpad..\n"); |
| |
| if (hgpk_force_recalibrate(psmouse)) |
| hgpk_err(psmouse, "recalibration failed!\n"); |
| } |
| |
| static int hgpk_register(struct psmouse *psmouse) |
| { |
| struct hgpk_data *priv = psmouse->private; |
| int err; |
| |
| /* register handlers */ |
| psmouse->protocol_handler = hgpk_process_byte; |
| psmouse->poll = hgpk_poll; |
| psmouse->disconnect = hgpk_disconnect; |
| psmouse->reconnect = hgpk_reconnect; |
| |
| /* Disable the idle resync. */ |
| psmouse->resync_time = 0; |
| /* Reset after a lot of bad bytes. */ |
| psmouse->resetafter = 1024; |
| |
| hgpk_setup_input_device(psmouse->dev, NULL, priv->mode); |
| |
| err = device_create_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_powered.dattr); |
| if (err) { |
| hgpk_err(psmouse, "Failed creating 'powered' sysfs node\n"); |
| return err; |
| } |
| |
| err = device_create_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_hgpk_mode.dattr); |
| if (err) { |
| hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n"); |
| goto err_remove_powered; |
| } |
| |
| /* C-series touchpads added the recalibrate command */ |
| if (psmouse->model >= HGPK_MODEL_C) { |
| err = device_create_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_recalibrate.dattr); |
| if (err) { |
| hgpk_err(psmouse, |
| "Failed creating 'recalibrate' sysfs node\n"); |
| goto err_remove_mode; |
| } |
| } |
| |
| return 0; |
| |
| err_remove_mode: |
| device_remove_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_hgpk_mode.dattr); |
| err_remove_powered: |
| device_remove_file(&psmouse->ps2dev.serio->dev, |
| &psmouse_attr_powered.dattr); |
| return err; |
| } |
| |
| int hgpk_init(struct psmouse *psmouse) |
| { |
| struct hgpk_data *priv; |
| int err; |
| |
| priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL); |
| if (!priv) { |
| err = -ENOMEM; |
| goto alloc_fail; |
| } |
| |
| psmouse->private = priv; |
| |
| priv->psmouse = psmouse; |
| priv->powered = true; |
| priv->mode = hgpk_default_mode; |
| INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work); |
| |
| err = hgpk_reset_device(psmouse, false); |
| if (err) |
| goto init_fail; |
| |
| err = hgpk_register(psmouse); |
| if (err) |
| goto init_fail; |
| |
| return 0; |
| |
| init_fail: |
| kfree(priv); |
| alloc_fail: |
| return err; |
| } |
| |
| static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| unsigned char param[3]; |
| |
| /* E7, E7, E7, E9 gets us a 3 byte identifier */ |
| if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { |
| return -EIO; |
| } |
| |
| hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); |
| |
| /* HGPK signature: 0x67, 0x00, 0x<model> */ |
| if (param[0] != 0x67 || param[1] != 0x00) |
| return -ENODEV; |
| |
| hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); |
| |
| return param[2]; |
| } |
| |
| int hgpk_detect(struct psmouse *psmouse, bool set_properties) |
| { |
| int version; |
| |
| version = hgpk_get_model(psmouse); |
| if (version < 0) |
| return version; |
| |
| if (set_properties) { |
| psmouse->vendor = "ALPS"; |
| psmouse->name = "HGPK"; |
| psmouse->model = version; |
| } |
| |
| return 0; |
| } |
| |
| void hgpk_module_init(void) |
| { |
| hgpk_default_mode = hgpk_mode_from_name(hgpk_mode_name, |
| strlen(hgpk_mode_name)); |
| if (hgpk_default_mode == HGPK_MODE_INVALID) { |
| hgpk_default_mode = HGPK_MODE_MOUSE; |
| strlcpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE], |
| sizeof(hgpk_mode_name)); |
| } |
| } |