ARM: pxa: support pxa95x
The core of PXA955 is PJ4. Add new PJ4 support. And add new macro
CONFIG_PXA95x.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dd235ec..d407659 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -651,11 +651,17 @@
help
PXA935 (codename Tavor-P65)
-config CPU_PXA950
+config PXA95x
bool
- select CPU_PXA930
+ select CPU_PJ4
help
- PXA950 (codename Tavor-PV2)
+ Select code specific to PXA95x variants
+
+config CPU_PXA955
+ bool
+ select PXA95x
+ help
+ PXA950 (codename MG1)
config PXA_SHARP_C7xx
bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c90789e..d7f3592 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index dd122d98..25be4ad 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -192,7 +192,7 @@
static int __init pxa3xx_clock_init(void)
{
- if (cpu_is_pxa3xx())
+ if (cpu_is_pxa3xx() || cpu_is_pxa95x())
return sysdev_class_register(&pxa3xx_clock_sysclass);
return 0;
}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index cf2cbd0..3a60752 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -56,7 +56,7 @@
extern struct sysdev_class pxa2xx_clock_sysclass;
-#ifdef CONFIG_PXA3xx
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
struct clk clk_##_name = { \
.ops = &clk_pxa3xx_cken_ops, \
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index aaa1166..022c2fa 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -342,27 +342,6 @@
};
#endif
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_i2c_power[] = {
- {
- .start = 0x40f500c0,
- .end = 0x40f500d3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa3xx-pwri2c",
- .id = 1,
- .resource = pxa3xx_resources_i2c_power,
- .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-#endif
-
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
@@ -633,30 +612,35 @@
#endif /* CONFIG_PXA25x */
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-static struct resource pxa27x_resource_keypad[] = {
+static struct resource pxa27x_resource_camera[] = {
[0] = {
- .start = 0x41500000,
- .end = 0x4150004c,
+ .start = 0x50000000,
+ .end = 0x50000fff,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_KEYPAD,
- .end = IRQ_KEYPAD,
+ .start = IRQ_CAMERA,
+ .end = IRQ_CAMERA,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device pxa27x_device_keypad = {
- .name = "pxa27x-keypad",
- .id = -1,
- .resource = pxa27x_resource_keypad,
- .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+ .name = "pxa27x-camera",
+ .id = 0, /* This is used to put cameras on this interface */
+ .dev = {
+ .dma_mask = &pxa27x_dma_mask_camera,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
+ .resource = pxa27x_resource_camera,
};
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
{
- pxa_register_device(&pxa27x_device_keypad, info);
+ pxa_register_device(&pxa27x_device_camera, info);
}
static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
@@ -689,6 +673,33 @@
{
pxa_register_device(&pxa27x_device_ohci, info);
}
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa27x_resource_keypad[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150004c,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_keypad = {
+ .name = "pxa27x-keypad",
+ .id = -1,
+ .resource = pxa27x_resource_keypad,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_keypad, info);
+}
static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
@@ -833,79 +844,9 @@
.resource = pxa27x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
};
-
-static struct resource pxa27x_resource_camera[] = {
- [0] = {
- .start = 0x50000000,
- .end = 0x50000fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAMERA,
- .end = IRQ_CAMERA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
- .name = "pxa27x-camera",
- .id = 0, /* This is used to put cameras on this interface */
- .dev = {
- .dma_mask = &pxa27x_dma_mask_camera,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
- .resource = pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
- pxa_register_device(&pxa27x_device_camera, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
#ifdef CONFIG_PXA3xx
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
- [0] = {
- .start = 0x41a00000,
- .end = 0x41a0003f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP4,
- .end = IRQ_SSP4,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* DRCMR for RX */
- .start = 2,
- .end = 2,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 3,
- .end = 3,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
- /* PXA3xx SSP is basically equivalent to PXA27x */
- .name = "pxa27x-ssp",
- .id = 3,
- .dev = {
- .dma_mask = &pxa3xx_ssp4_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = pxa3xx_resource_ssp4,
- .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-
static struct resource pxa3xx_resources_mci2[] = {
[0] = {
.start = 0x42000000,
@@ -984,6 +925,54 @@
pxa_register_device(&pxa3xx_device_mci3, info);
}
+static struct resource pxa3xx_resources_gcu[] = {
+ {
+ .start = 0x54000000,
+ .end = 0x54000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_GCU,
+ .end = IRQ_GCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+ .name = "pxa3xx-gcu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
+ .resource = pxa3xx_resources_gcu,
+ .dev = {
+ .dma_mask = &pxa3xx_gcu_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa3xx_resources_i2c_power[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa3xx-pwri2c",
+ .id = 1,
+ .resource = pxa3xx_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
static struct resource pxa3xx_resources_nand[] = {
[0] = {
.start = 0x43100000,
@@ -1027,33 +1016,45 @@
pxa_register_device(&pxa3xx_device_nand, info);
}
-static struct resource pxa3xx_resources_gcu[] = {
- {
- .start = 0x54000000,
- .end = 0x54000fff,
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+ [0] = {
+ .start = 0x41a00000,
+ .end = 0x41a0003f,
.flags = IORESOURCE_MEM,
},
- {
- .start = IRQ_GCU,
- .end = IRQ_GCU,
+ [1] = {
+ .start = IRQ_SSP4,
+ .end = IRQ_SSP4,
.flags = IORESOURCE_IRQ,
},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
- .name = "pxa3xx-gcu",
- .id = -1,
- .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
- .resource = pxa3xx_resources_gcu,
- .dev = {
- .dma_mask = &pxa3xx_gcu_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ [2] = {
+ /* DRCMR for RX */
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_DMA,
},
};
-#endif /* CONFIG_PXA3xx */
+struct platform_device pxa3xx_device_ssp4 = {
+ /* PXA3xx SSP is basically equivalent to PXA27x */
+ .name = "pxa27x-ssp",
+ .id = 3,
+ .dev = {
+ .dma_mask = &pxa3xx_ssp4_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa3xx_resource_ssp4,
+ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index d2bb071..d6e15f7 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -29,6 +29,7 @@
#include <mach/reset.h>
#include <mach/gpio.h>
#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
#include "generic.h"
@@ -36,9 +37,10 @@
{
if (cpu_is_pxa2xx())
pxa2xx_clear_reset_status(mask);
-
- if (cpu_is_pxa3xx())
- pxa3xx_clear_reset_status(mask);
+ else {
+ /* RESET_STATUS_* has a 1:1 mapping with ARSR */
+ ARSR = mask;
+ }
}
unsigned long get_clock_tick_rate(void)
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0569d82..6205dc9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -20,6 +20,7 @@
#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
extern void __init pxa_map_io(void);
extern void __init pxa25x_map_io(void);
@@ -54,10 +55,8 @@
#ifdef CONFIG_PXA3xx
extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern void pxa3xx_clear_reset_status(unsigned int);
#else
#define pxa3xx_get_clk_frequency_khz(x) (0)
-static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
#endif
extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e480d1e..6957ba5 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -195,14 +195,15 @@
#define __cpu_is_pxa935(id) (0)
#endif
-#ifdef CONFIG_CPU_PXA950
-#define __cpu_is_pxa950(id) \
- ({ \
+#ifdef CONFIG_CPU_PXA955
+#define __cpu_is_pxa955(id) \
+ ({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x697; \
- })
+ _id == 0x581 || _id == 0xc08 \
+ || _id == 0xb76; \
+ })
#else
-#define __cpu_is_pxa950(id) (0)
+#define __cpu_is_pxa955(id) (0)
#endif
#define cpu_is_pxa210() \
@@ -255,10 +256,10 @@
__cpu_is_pxa935(read_cpuid_id()); \
})
-#define cpu_is_pxa950() \
+#define cpu_is_pxa955() \
({ \
- __cpu_is_pxa950(read_cpuid_id()); \
- })
+ __cpu_is_pxa955(read_cpuid_id()); \
+ })
/*
@@ -297,6 +298,15 @@
#define __cpu_is_pxa93x(id) (0)
#endif
+#ifdef CONFIG_PXA95x
+#define __cpu_is_pxa95x(id) \
+ ({ \
+ __cpu_is_pxa955(id); \
+ })
+#else
+#define __cpu_is_pxa95x(id) (0)
+#endif
+
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -311,6 +321,12 @@
({ \
__cpu_is_pxa93x(read_cpuid_id()); \
})
+
+#define cpu_is_pxa95x() \
+ ({ \
+ __cpu_is_pxa95x(read_cpuid_id()); \
+ })
+
/*
* return current memory and LCD clock frequency in units of 10kHz
*/
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index cb7ee26..a4285fc 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -84,6 +84,7 @@
#define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
#define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
#define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
+#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index a1c3ab2..da3edcc 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -41,12 +41,6 @@
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
-void pxa3xx_clear_reset_status(unsigned int mask)
-{
- /* RESET_STATUS_* has a 1:1 mapping with ARSR */
- ARSR = mask;
-}
-
static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7d29dd3..8aeacf9 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@
static int __init pxa930_init(void)
{
- if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
+ if (cpu_is_pxa93x()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa930_mfp_addr_map);
}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
new file mode 100644
index 0000000..437980f
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -0,0 +1,308 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa95x.c
+ *
+ * code specific to PXA95x aka MGx
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/pxa930.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/regs-intc.h>
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR(GPIO0, 0x02e0),
+ MFP_ADDR(GPIO1, 0x02dc),
+ MFP_ADDR(GPIO2, 0x02e8),
+ MFP_ADDR(GPIO3, 0x02d8),
+ MFP_ADDR(GPIO4, 0x02e4),
+ MFP_ADDR(GPIO5, 0x02ec),
+ MFP_ADDR(GPIO6, 0x02f8),
+ MFP_ADDR(GPIO7, 0x02fc),
+ MFP_ADDR(GPIO8, 0x0300),
+ MFP_ADDR(GPIO9, 0x02d4),
+ MFP_ADDR(GPIO10, 0x02f4),
+ MFP_ADDR(GPIO11, 0x02f0),
+ MFP_ADDR(GPIO12, 0x0304),
+ MFP_ADDR(GPIO13, 0x0310),
+ MFP_ADDR(GPIO14, 0x0308),
+ MFP_ADDR(GPIO15, 0x030c),
+ MFP_ADDR(GPIO16, 0x04e8),
+ MFP_ADDR(GPIO17, 0x04f4),
+ MFP_ADDR(GPIO18, 0x04f8),
+ MFP_ADDR(GPIO19, 0x04fc),
+ MFP_ADDR(GPIO20, 0x0518),
+ MFP_ADDR(GPIO21, 0x051c),
+ MFP_ADDR(GPIO22, 0x04ec),
+ MFP_ADDR(GPIO23, 0x0500),
+ MFP_ADDR(GPIO24, 0x04f0),
+ MFP_ADDR(GPIO25, 0x0504),
+ MFP_ADDR(GPIO26, 0x0510),
+ MFP_ADDR(GPIO27, 0x0514),
+ MFP_ADDR(GPIO28, 0x0520),
+ MFP_ADDR(GPIO29, 0x0600),
+ MFP_ADDR(GPIO30, 0x0618),
+ MFP_ADDR(GPIO31, 0x0610),
+ MFP_ADDR(GPIO32, 0x060c),
+ MFP_ADDR(GPIO33, 0x061c),
+ MFP_ADDR(GPIO34, 0x0620),
+ MFP_ADDR(GPIO35, 0x0628),
+ MFP_ADDR(GPIO36, 0x062c),
+ MFP_ADDR(GPIO37, 0x0630),
+ MFP_ADDR(GPIO38, 0x0634),
+ MFP_ADDR(GPIO39, 0x0638),
+ MFP_ADDR(GPIO40, 0x063c),
+ MFP_ADDR(GPIO41, 0x0614),
+ MFP_ADDR(GPIO42, 0x0624),
+ MFP_ADDR(GPIO43, 0x0608),
+ MFP_ADDR(GPIO44, 0x0604),
+ MFP_ADDR(GPIO45, 0x050c),
+ MFP_ADDR(GPIO46, 0x0508),
+ MFP_ADDR(GPIO47, 0x02bc),
+ MFP_ADDR(GPIO48, 0x02b4),
+ MFP_ADDR(GPIO49, 0x02b8),
+ MFP_ADDR(GPIO50, 0x02c8),
+ MFP_ADDR(GPIO51, 0x02c0),
+ MFP_ADDR(GPIO52, 0x02c4),
+ MFP_ADDR(GPIO53, 0x02d0),
+ MFP_ADDR(GPIO54, 0x02cc),
+ MFP_ADDR(GPIO55, 0x029c),
+ MFP_ADDR(GPIO56, 0x02a0),
+ MFP_ADDR(GPIO57, 0x0294),
+ MFP_ADDR(GPIO58, 0x0298),
+ MFP_ADDR(GPIO59, 0x02a4),
+ MFP_ADDR(GPIO60, 0x02a8),
+ MFP_ADDR(GPIO61, 0x02b0),
+ MFP_ADDR(GPIO62, 0x02ac),
+ MFP_ADDR(GPIO63, 0x0640),
+ MFP_ADDR(GPIO64, 0x065c),
+ MFP_ADDR(GPIO65, 0x0648),
+ MFP_ADDR(GPIO66, 0x0644),
+ MFP_ADDR(GPIO67, 0x0674),
+ MFP_ADDR(GPIO68, 0x0658),
+ MFP_ADDR(GPIO69, 0x0654),
+ MFP_ADDR(GPIO70, 0x0660),
+ MFP_ADDR(GPIO71, 0x0668),
+ MFP_ADDR(GPIO72, 0x0664),
+ MFP_ADDR(GPIO73, 0x0650),
+ MFP_ADDR(GPIO74, 0x066c),
+ MFP_ADDR(GPIO75, 0x064c),
+ MFP_ADDR(GPIO76, 0x0670),
+ MFP_ADDR(GPIO77, 0x0678),
+ MFP_ADDR(GPIO78, 0x067c),
+ MFP_ADDR(GPIO79, 0x0694),
+ MFP_ADDR(GPIO80, 0x069c),
+ MFP_ADDR(GPIO81, 0x06a0),
+ MFP_ADDR(GPIO82, 0x06a4),
+ MFP_ADDR(GPIO83, 0x0698),
+ MFP_ADDR(GPIO84, 0x06bc),
+ MFP_ADDR(GPIO85, 0x06b4),
+ MFP_ADDR(GPIO86, 0x06b0),
+ MFP_ADDR(GPIO87, 0x06c0),
+ MFP_ADDR(GPIO88, 0x06c4),
+ MFP_ADDR(GPIO89, 0x06ac),
+ MFP_ADDR(GPIO90, 0x0680),
+ MFP_ADDR(GPIO91, 0x0684),
+ MFP_ADDR(GPIO92, 0x0688),
+ MFP_ADDR(GPIO93, 0x0690),
+ MFP_ADDR(GPIO94, 0x068c),
+ MFP_ADDR(GPIO95, 0x06a8),
+ MFP_ADDR(GPIO96, 0x06b8),
+ MFP_ADDR(GPIO97, 0x0410),
+ MFP_ADDR(GPIO98, 0x0418),
+ MFP_ADDR(GPIO99, 0x041c),
+ MFP_ADDR(GPIO100, 0x0414),
+ MFP_ADDR(GPIO101, 0x0408),
+ MFP_ADDR(GPIO102, 0x0324),
+ MFP_ADDR(GPIO103, 0x040c),
+ MFP_ADDR(GPIO104, 0x0400),
+ MFP_ADDR(GPIO105, 0x0328),
+ MFP_ADDR(GPIO106, 0x0404),
+
+ MFP_ADDR(GPIO159, 0x0524),
+ MFP_ADDR(GPIO163, 0x0534),
+ MFP_ADDR(GPIO167, 0x0544),
+ MFP_ADDR(GPIO168, 0x0548),
+ MFP_ADDR(GPIO169, 0x054c),
+ MFP_ADDR(GPIO170, 0x0550),
+ MFP_ADDR(GPIO171, 0x0554),
+ MFP_ADDR(GPIO172, 0x0558),
+ MFP_ADDR(GPIO173, 0x055c),
+
+ MFP_ADDR(nXCVREN, 0x0204),
+ MFP_ADDR(DF_CLE_nOE, 0x020c),
+ MFP_ADDR(DF_nADV1_ALE, 0x0218),
+ MFP_ADDR(DF_SCLK_E, 0x0214),
+ MFP_ADDR(DF_SCLK_S, 0x0210),
+ MFP_ADDR(nBE0, 0x021c),
+ MFP_ADDR(nBE1, 0x0220),
+ MFP_ADDR(DF_nADV2_ALE, 0x0224),
+ MFP_ADDR(DF_INT_RnB, 0x0228),
+ MFP_ADDR(DF_nCS0, 0x022c),
+ MFP_ADDR(DF_nCS1, 0x0230),
+ MFP_ADDR(nLUA, 0x0254),
+ MFP_ADDR(nLLA, 0x0258),
+ MFP_ADDR(DF_nWE, 0x0234),
+ MFP_ADDR(DF_nRE_nOE, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x024c),
+ MFP_ADDR(DF_ADDR1, 0x0250),
+ MFP_ADDR(DF_ADDR2, 0x025c),
+ MFP_ADDR(DF_ADDR3, 0x0260),
+ MFP_ADDR(DF_IO0, 0x023c),
+ MFP_ADDR(DF_IO1, 0x0240),
+ MFP_ADDR(DF_IO2, 0x0244),
+ MFP_ADDR(DF_IO3, 0x0248),
+ MFP_ADDR(DF_IO4, 0x0264),
+ MFP_ADDR(DF_IO5, 0x0268),
+ MFP_ADDR(DF_IO6, 0x026c),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0274),
+ MFP_ADDR(DF_IO9, 0x0278),
+ MFP_ADDR(DF_IO10, 0x027c),
+ MFP_ADDR(DF_IO11, 0x0280),
+ MFP_ADDR(DF_IO12, 0x0284),
+ MFP_ADDR(DF_IO13, 0x0288),
+ MFP_ADDR(DF_IO14, 0x028c),
+ MFP_ADDR(DF_IO15, 0x0290),
+
+ MFP_ADDR(GSIM_UIO, 0x0314),
+ MFP_ADDR(GSIM_UCLK, 0x0318),
+ MFP_ADDR(GSIM_UDET, 0x031c),
+ MFP_ADDR(GSIM_nURST, 0x0320),
+
+ MFP_ADDR(PMIC_INT, 0x06c8),
+
+ MFP_ADDR(RDY, 0x0200),
+
+ MFP_ADDR_END,
+};
+
+static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+
+static struct clk_lookup pxa95x_clkregs[] = {
+ INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
+ /* Power I2C clock is always on */
+ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
+ INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
+ INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
+ INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+};
+
+void __init pxa95x_init_irq(void)
+{
+ pxa_init_irq(96, NULL);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
+}
+
+/*
+ * device registration specific to PXA93x.
+ */
+
+void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct platform_device *devices[] __initdata = {
+ &sa1100_device_rtc,
+ &pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa3xx_device_ssp4,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
+};
+
+static struct sys_device pxa95x_sysdev[] = {
+ {
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .cls = &pxa_gpio_sysclass,
+ }, {
+ .cls = &pxa3xx_clock_sysclass,
+ }
+};
+
+static int __init pxa95x_init(void)
+{
+ int ret = 0, i;
+
+ if (cpu_is_pxa95x()) {
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa95x_mfp_addr_map);
+
+ reset_status = ARSR;
+
+ /*
+ * clear RDH bit every time after reset
+ *
+ * Note: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+ clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
+
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
+ ret = sysdev_register(&pxa95x_sysdev[i]);
+ if (ret)
+ pr_err("failed to register sysdev[%d]\n", i);
+ }
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 4414a01..ede1763 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -382,6 +382,12 @@
for which the CPU ID is equal to the ARM926 ID.
Relevant for Feroceon-1850 and early Feroceon-2850.
+# Marvell PJ4
+config CPU_PJ4
+ bool
+ select CPU_V7
+ select ARM_THUMBEE
+
# ARMv6
config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 4aacdd1..3aca5ba 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
+obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 9e604c8..75f6564 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -423,7 +423,7 @@
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
/*
* each MFP pin will have a MFPR register, since the offset of the
* register varies between processors, the processor specific code
@@ -470,6 +470,6 @@
void mfp_config(unsigned long *mfp_cfgs, int num);
void mfp_config_run(void);
void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
#endif /* __ASM_PLAT_MFP_H */