V4L/DVB (9116): USB: remove info() macro from usb media drivers
USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Cc: Douglas Landgraf <dougsland@gmail.com>
Cc: Mike Isely <isely@pobox.com>
Cc: Thierry Merle <thierry.merle@free.fr>
Cc: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 0f06e6f..b3a5cb1 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -510,7 +510,8 @@
static int __init dsbr100_init(void)
{
int retval = usb_register(&usb_dsbr100_driver);
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return retval;
}
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 79faedf5..3aa538a 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -866,7 +866,8 @@
dbg("dabusb_init: driver registered");
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
out:
return retval;
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index c685240..935d73d 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -974,14 +974,14 @@
for (i = reg1; i <= regn; i++) {
rc = i2c_r(ov, i);
- info("Sensor[0x%02X] = 0x%02X", i, rc);
+ dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc);
}
}
static void
dump_i2c_regs(struct usb_ov511 *ov)
{
- info("I2C REGS");
+ dev_info(&ov->dev->dev, "I2C REGS\n");
dump_i2c_range(ov, 0x00, 0x7C);
}
@@ -992,28 +992,28 @@
for (i = reg1; i <= regn; i++) {
rc = reg_r(ov, i);
- info("OV511[0x%02X] = 0x%02X", i, rc);
+ dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc);
}
}
static void
ov511_dump_regs(struct usb_ov511 *ov)
{
- info("CAMERA INTERFACE REGS");
+ dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n");
dump_reg_range(ov, 0x10, 0x1f);
- info("DRAM INTERFACE REGS");
+ dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n");
dump_reg_range(ov, 0x20, 0x23);
- info("ISO FIFO REGS");
+ dev_info(&ov->dev->dev, "ISO FIFO REGS\n");
dump_reg_range(ov, 0x30, 0x31);
- info("PIO REGS");
+ dev_info(&ov->dev->dev, "PIO REGS\n");
dump_reg_range(ov, 0x38, 0x39);
dump_reg_range(ov, 0x3e, 0x3e);
- info("I2C REGS");
+ dev_info(&ov->dev->dev, "I2C REGS\n");
dump_reg_range(ov, 0x40, 0x49);
- info("SYSTEM CONTROL REGS");
+ dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n");
dump_reg_range(ov, 0x50, 0x55);
dump_reg_range(ov, 0x5e, 0x5f);
- info("OmniCE REGS");
+ dev_info(&ov->dev->dev, "OmniCE REGS\n");
dump_reg_range(ov, 0x70, 0x79);
/* NOTE: Quantization tables are not readable. You will get the value
* in reg. 0x79 for every table register */
@@ -1025,25 +1025,25 @@
static void
ov518_dump_regs(struct usb_ov511 *ov)
{
- info("VIDEO MODE REGS");
+ dev_info(&ov->dev->dev, "VIDEO MODE REGS\n");
dump_reg_range(ov, 0x20, 0x2f);
- info("DATA PUMP AND SNAPSHOT REGS");
+ dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n");
dump_reg_range(ov, 0x30, 0x3f);
- info("I2C REGS");
+ dev_info(&ov->dev->dev, "I2C REGS\n");
dump_reg_range(ov, 0x40, 0x4f);
- info("SYSTEM CONTROL AND VENDOR REGS");
+ dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n");
dump_reg_range(ov, 0x50, 0x5f);
- info("60 - 6F");
+ dev_info(&ov->dev->dev, "60 - 6F\n");
dump_reg_range(ov, 0x60, 0x6f);
- info("70 - 7F");
+ dev_info(&ov->dev->dev, "70 - 7F\n");
dump_reg_range(ov, 0x70, 0x7f);
- info("Y QUANTIZATION TABLE");
+ dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n");
dump_reg_range(ov, 0x80, 0x8f);
- info("UV QUANTIZATION TABLE");
+ dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n");
dump_reg_range(ov, 0x90, 0x9f);
- info("A0 - BF");
+ dev_info(&ov->dev->dev, "A0 - BF\n");
dump_reg_range(ov, 0xa0, 0xbf);
- info("CBR");
+ dev_info(&ov->dev->dev, "CBR\n");
dump_reg_range(ov, 0xc0, 0xcf);
}
#endif
@@ -3205,9 +3205,10 @@
*/
if (printph) {
- info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x",
- pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
- in[7], in[8], in[9], in[10], in[11]);
+ dev_info(&ov->dev->dev,
+ "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n",
+ pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6],
+ in[7], in[8], in[9], in[10], in[11]);
}
/* Check for SOF/EOF packet */
@@ -3366,8 +3367,10 @@
* the definitive SOF/EOF format */
if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) {
if (printph) {
- info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0],
- in[1], in[2], in[3], in[4], in[5], in[6], in[7]);
+ dev_info(&ov->dev->dev,
+ "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n",
+ in[0], in[1], in[2], in[3], in[4], in[5],
+ in[6], in[7]);
}
if (frame->scanstate == STATE_LINES) {
@@ -3646,14 +3649,16 @@
if (packetsize == -1) {
ov518_set_packet_size(ov, 640);
} else {
- info("Forcing packet size to %d", packetsize);
+ dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
+ packetsize);
ov518_set_packet_size(ov, packetsize);
}
} else {
if (packetsize == -1) {
ov511_set_packet_size(ov, size);
} else {
- info("Forcing packet size to %d", packetsize);
+ dev_info(&ov->dev->dev, "Forcing packet size to %d\n",
+ packetsize);
ov511_set_packet_size(ov, packetsize);
}
}
@@ -4121,7 +4126,7 @@
return -EIO;
if (force_palette && p->palette != force_palette) {
- info("Palette rejected (%s)",
+ dev_info(&ov->dev->dev, "Palette rejected (%s)\n",
symbolic(v4l1_plist, p->palette));
return -EINVAL;
}
@@ -4849,26 +4854,27 @@
err("Error detecting sensor type");
return -1;
} else if ((rc & 3) == 3) {
- info("Sensor is an OV7610");
+ dev_info(&ov->dev->dev, "Sensor is an OV7610\n");
ov->sensor = SEN_OV7610;
} else if ((rc & 3) == 1) {
/* I don't know what's different about the 76BE yet. */
if (i2c_r(ov, 0x15) & 1)
- info("Sensor is an OV7620AE");
+ dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n");
else
- info("Sensor is an OV76BE");
+ dev_info(&ov->dev->dev, "Sensor is an OV76BE\n");
/* OV511+ will return all zero isoc data unless we
* configure the sensor as a 7620. Someone needs to
* find the exact reg. setting that causes this. */
if (ov->bridge == BRG_OV511PLUS) {
- info("Enabling 511+/7620AE workaround");
+ dev_info(&ov->dev->dev,
+ "Enabling 511+/7620AE workaround\n");
ov->sensor = SEN_OV7620;
} else {
ov->sensor = SEN_OV76BE;
}
} else if ((rc & 3) == 0) {
- info("Sensor is an OV7620");
+ dev_info(&ov->dev->dev, "Sensor is an OV7620\n");
ov->sensor = SEN_OV7620;
} else {
err("Unknown image sensor version: %d", rc & 3);
@@ -5024,16 +5030,16 @@
if ((rc & 3) == 0) {
ov->sensor = SEN_OV6630;
- info("Sensor is an OV6630");
+ dev_info(&ov->dev->dev, "Sensor is an OV6630\n");
} else if ((rc & 3) == 1) {
ov->sensor = SEN_OV6620;
- info("Sensor is an OV6620");
+ dev_info(&ov->dev->dev, "Sensor is an OV6620\n");
} else if ((rc & 3) == 2) {
ov->sensor = SEN_OV6630;
- info("Sensor is an OV6630AE");
+ dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n");
} else if ((rc & 3) == 3) {
ov->sensor = SEN_OV6630;
- info("Sensor is an OV6630AF");
+ dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n");
}
/* Set sensor-specific vars */
@@ -5088,10 +5094,10 @@
err("Error detecting sensor type");
return -1;
} else if ((rc & 0x0f) == 0) {
- info("Sensor is a KS0127");
+ dev_info(&ov->dev->dev, "Sensor is a KS0127\n");
ov->sensor = SEN_KS0127;
} else if ((rc & 0x0f) == 9) {
- info("Sensor is a KS0127B Rev. A");
+ dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n");
ov->sensor = SEN_KS0127B;
}
} else {
@@ -5200,7 +5206,8 @@
err("Error detecting sensor version");
return -1;
} else {
- info("Sensor is an SAA7111A (version 0x%x)", rc);
+ dev_info(&ov->dev->dev,
+ "Sensor is an SAA7111A (version 0x%x)\n", rc);
ov->sensor = SEN_SAA7111A;
}
@@ -5262,7 +5269,7 @@
PDEBUG (1, "CustomID = %d", ov->customid);
ov->desc = symbolic(camlist, ov->customid);
- info("model: %s", ov->desc);
+ dev_info(&ov->dev->dev, "model: %s\n", ov->desc);
if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) {
err("Camera type (%d) not recognized", ov->customid);
@@ -5426,7 +5433,8 @@
PDEBUG(4, "");
/* First 5 bits of custom ID reg are a revision ID on OV518 */
- info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID));
+ dev_info(&ov->dev->dev, "Device revision %d\n",
+ 0x1F & reg_r(ov, R511_SYS_CUST_ID));
/* Give it the default description */
ov->desc = symbolic(camlist, 0);
@@ -5773,7 +5781,8 @@
goto error;
}
- info("USB %s video device found", symbolic(brglist, ov->bridge));
+ dev_info(&intf->dev, "USB %s video device found\n",
+ symbolic(brglist, ov->bridge));
init_waitqueue_head(&ov->wq);
@@ -5854,8 +5863,8 @@
goto error;
}
- info("Device at %s registered to minor %d", ov->usb_path,
- ov->vdev->minor);
+ dev_info(&intf->dev, "Device at %s registered to minor %d\n",
+ ov->usb_path, ov->vdev->minor);
usb_set_intfdata(intf, ov);
if (ov_create_sysfs(ov->vdev)) {
@@ -5958,7 +5967,8 @@
if (retval)
goto out;
- info(DRIVER_VERSION " : " DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
out:
return retval;
@@ -5968,8 +5978,7 @@
usb_ov511_exit(void)
{
usb_deregister(&ov511_driver);
- info("driver deregistered");
-
+ printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n");
}
module_init(usb_ov511_init);
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
index baded12..70d99e5 100644
--- a/drivers/media/video/ov511.h
+++ b/drivers/media/video/ov511.h
@@ -12,7 +12,8 @@
#ifdef OV511_DEBUG
#define PDEBUG(level, fmt, args...) \
- if (debug >= (level)) info("[%s:%d] " fmt, \
+ if (debug >= (level)) \
+ printk(KERN_INFO KBUILD_MODNAME "[%s:%d] \n" fmt, \
__func__, __LINE__ , ## args)
#else
#define PDEBUG(level, fmt, args...) do {} while(0)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index ad0d98c..9b3c874 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -137,9 +137,11 @@
ret = usb_register(&pvr_driver);
if (ret == 0)
- info(DRIVER_DESC " : " DRIVER_VERSION);
- if (pvrusb2_debug) info("Debug mask is %d (0x%x)",
- pvrusb2_debug,pvrusb2_debug);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
+ if (pvrusb2_debug)
+ printk(KERN_INFO KBUILD_MODNAME ": Debug mask is %d (0x%x)\n",
+ pvrusb2_debug,pvrusb2_debug);
pvr2_trace(PVR2_TRACE_INIT,"pvr_init complete");
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index b01f25d..ae39491 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -288,7 +288,7 @@
int status;
if (!se401->dev) {
- info("ohoh: device vapourished");
+ dev_info(&urb->dev->dev, "device vapourished\n");
return;
}
@@ -328,7 +328,7 @@
return;
if (!se401->dev) {
- info ("ohoh: device vapourished");
+ dev_info(&urb->dev->dev, "device vapourished\n");
return;
}
@@ -375,7 +375,7 @@
urb->status=0;
urb->dev=se401->dev;
if(usb_submit_urb(urb, GFP_KERNEL))
- info("urb burned down");
+ dev_info(&urb->dev->dev, "urb burned down\n");
return;
}
@@ -860,7 +860,8 @@
);
if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
se401->nullpackets=0;
- info("to many null length packets, restarting capture");
+ dev_info(&se401->dev->dev,
+ "too many null length packets, restarting capture\n");
se401_stop_stream(se401);
se401_start_stream(se401);
} else {
@@ -880,7 +881,8 @@
se401->scratch_use=0;
if (errors > SE401_MAX_ERRORS) {
errors=0;
- info("to much errors, restarting capture");
+ dev_info(&se401->dev->dev,
+ "too many errors, restarting capture\n");
se401_stop_stream(se401);
se401_start_stream(se401);
}
@@ -913,7 +915,7 @@
usb_kill_urb(se401->inturb);
usb_free_urb(se401->inturb);
}
- info("%s disconnected", se401->camera_name);
+ dev_info(&se401->dev->dev, "%s disconnected", se401->camera_name);
/* Free the memory */
kfree(se401->width);
@@ -960,8 +962,8 @@
rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES);
if (se401->removed) {
+ dev_info(&se401->dev->dev, "device unregistered\n");
usb_se401_remove_disconnected(se401);
- info("device unregistered");
} else {
for (i=0; i<SE401_NUMFRAMES; i++)
se401->frame[i].grabstate=FRAME_UNUSED;
@@ -1276,7 +1278,7 @@
for (i=0; i<se401->sizes; i++) {
sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]);
}
- info("%s", temp);
+ dev_info(&se401->dev->dev, "%s\n", temp);
se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3;
rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp));
@@ -1310,7 +1312,8 @@
if (button) {
se401->inturb=usb_alloc_urb(0, GFP_KERNEL);
if (!se401->inturb) {
- info("Allocation of inturb failed");
+ dev_info(&se401->dev->dev,
+ "Allocation of inturb failed\n");
return 1;
}
usb_fill_int_urb(se401->inturb, se401->dev,
@@ -1321,7 +1324,7 @@
8
);
if (usb_submit_urb(se401->inturb, GFP_KERNEL)) {
- info("int urb burned down");
+ dev_info(&se401->dev->dev, "int urb burned down\n");
return 1;
}
} else
@@ -1378,7 +1381,7 @@
return -ENODEV;
/* We found one */
- info("SE401 camera found: %s", camera_name);
+ dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name);
if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
err("couldn't kmalloc se401 struct");
@@ -1389,7 +1392,8 @@
se401->iface = interface->bInterfaceNumber;
se401->camera_name = camera_name;
- info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255);
+ dev_info(&intf->dev, "firmware version: %02x\n",
+ le16_to_cpu(dev->descriptor.bcdDevice) & 255);
if (se401_init(se401, button)) {
kfree(se401);
@@ -1407,7 +1411,8 @@
err("video_register_device failed");
return -EIO;
}
- info("registered new video device: video%d", se401->vdev.minor);
+ dev_info(&intf->dev, "registered new video device: video%d\n",
+ se401->vdev.minor);
usb_set_intfdata (intf, se401);
return 0;
@@ -1451,10 +1456,10 @@
static int __init usb_se401_init(void)
{
- info("SE401 usb camera driver version %s registering", version);
+ printk(KERN_INFO "SE401 usb camera driver version %s registering\n", version);
if (flickerless)
if (flickerless!=50 && flickerless!=60) {
- info("Invallid flickerless value, use 0, 50 or 60.");
+ printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n");
return -1;
}
return usb_register(&se401_driver);
@@ -1463,7 +1468,7 @@
static void __exit usb_se401_exit(void)
{
usb_deregister(&se401_driver);
- info("SE401 driver deregistered");
+ printk(KERN_INFO "SE401 driver deregistered\frame");
}
module_init(usb_se401_init);
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index b21a8d6..9c549d9 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -84,7 +84,8 @@
#define PDEBUG(level, fmt, args...) \
do { \
if (debug >= level) \
- info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \
+ printk(KERN_INFO KBUILD_MODNAME " [%s:%d] \n" fmt, \
+ __func__, __LINE__ , ## args); \
} while (0)
@@ -1552,7 +1553,8 @@
}
PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION);
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
}
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index cc27efe..28421d3 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -258,7 +258,9 @@
(RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00))
{
#if 0 /* This code helps to detect new frame markers */
- info("Header sig: 00 FF 00 %02X", RING_QUEUE_PEEK(&uvd->dp, 3));
+ dev_info(&uvd->dev->dev,
+ "Header sig: 00 FF 00 %02X\n",
+ RING_QUEUE_PEEK(&uvd->dp, 3));
#endif
frame->header = RING_QUEUE_PEEK(&uvd->dp, 3);
if ((frame->header == HDRSIG_MODEL1_128x96) ||
@@ -266,7 +268,8 @@
(frame->header == HDRSIG_MODEL1_352x288))
{
#if 0
- info("Header found.");
+ dev_info(&uvd->dev->dev,
+ "Header found.\n");
#endif
RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
icam->has_hdr = 1;
@@ -295,7 +298,7 @@
(RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF))
{
#if 0
- info("Header found.");
+ dev_info(&uvd->dev->dev, "Header found.\n");
#endif
RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
icam->has_hdr = 1;
@@ -338,7 +341,7 @@
byte4 = RING_QUEUE_PEEK(&uvd->dp, 3);
frame->header = (byte3 << 8) | byte4;
#if 0
- info("Header found.");
+ dev_info(&uvd->dev->dev, "Header found.\n");
#endif
RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
icam->has_hdr = 1;
@@ -354,7 +357,8 @@
}
if (!icam->has_hdr) {
if (uvd->debug > 2)
- info("Skipping frame, no header");
+ dev_info(&uvd->dev->dev,
+ "Skipping frame, no header\n");
return scan_EndParse;
}
@@ -881,7 +885,9 @@
*/
if ((frame->curline + 1) >= data_h) {
if (uvd->debug >= 3)
- info("Reached line %d. (frame is done)", frame->curline);
+ dev_info(&uvd->dev->dev,
+ "Reached line %d. (frame is done)\n",
+ frame->curline);
return scan_NextFrame;
}
@@ -954,8 +960,9 @@
if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
if (uvd->debug >= 3) {
- info("All requested lines (%ld.) done.",
- VIDEOSIZE_Y(frame->request));
+ dev_info(&uvd->dev->dev,
+ "All requested lines (%ld.) done.\n",
+ VIDEOSIZE_Y(frame->request));
}
return scan_NextFrame;
} else
@@ -1000,7 +1007,9 @@
*/
if ((frame->curline + 1) >= data_h) {
if (uvd->debug >= 3)
- info("Reached line %d. (frame is done)", frame->curline);
+ dev_info(&uvd->dev->dev,
+ "Reached line %d. (frame is done)\n",
+ frame->curline);
return scan_NextFrame;
}
@@ -1049,8 +1058,9 @@
if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
if (uvd->debug >= 3) {
- info("All requested lines (%ld.) done.",
- VIDEOSIZE_Y(frame->request));
+ dev_info(&uvd->dev->dev,
+ "All requested lines (%ld.) done.\n",
+ VIDEOSIZE_Y(frame->request));
}
return scan_NextFrame;
} else
@@ -1171,10 +1181,11 @@
sizeof(cp),
1000);
#if 0
- info("USB => %02x%02x%02x%02x%02x%02x%02x%02x "
- "(req=$%02x val=$%04x ind=$%04x)",
- cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
- req, value, index);
+ dev_info(&uvd->dev->dev,
+ "USB => %02x%02x%02x%02x%02x%02x%02x%02x "
+ "(req=$%02x val=$%04x ind=$%04x)\n",
+ cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
+ req, value, index);
#endif
} else {
i = usb_control_msg(
@@ -1449,10 +1460,9 @@
*/
static void ibmcam_change_lighting_conditions(struct uvd *uvd)
{
- static const char proc[] = "ibmcam_change_lighting_conditions";
-
if (debug > 0)
- info("%s: Set lighting to %hu.", proc, lighting);
+ dev_info(&uvd->dev->dev,
+ "%s: Set lighting to %hu.\n", __func__, lighting);
switch (IBMCAM_T(uvd)->camera_model) {
case IBMCAM_MODEL_1:
@@ -1495,8 +1505,6 @@
*/
static void ibmcam_set_sharpness(struct uvd *uvd)
{
- static const char proc[] = "ibmcam_set_sharpness";
-
switch (IBMCAM_T(uvd)->camera_model) {
case IBMCAM_MODEL_1:
{
@@ -1505,7 +1513,8 @@
RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
if (debug > 0)
- info("%s: Set sharpness to %hu.", proc, sharpness);
+ dev_info(&uvd->dev->dev, "%s: Set sharpness to %hu.\n",
+ __func__, sharpness);
sv = sa[sharpness - SHARPNESS_MIN];
for (i=0; i < 2; i++) {
@@ -1564,11 +1573,11 @@
*/
static void ibmcam_set_brightness(struct uvd *uvd)
{
- static const char proc[] = "ibmcam_set_brightness";
static const unsigned short n = 1;
if (debug > 0)
- info("%s: Set brightness to %hu.", proc, uvd->vpic.brightness);
+ dev_info(&uvd->dev->dev, "%s: Set brightness to %hu.\n",
+ __func__, uvd->vpic.brightness);
switch (IBMCAM_T(uvd)->camera_model) {
case IBMCAM_MODEL_1:
@@ -2115,7 +2124,8 @@
break;
}
if (uvd->debug > 0)
- info("Framerate (hardware): %hd.", hw_fps);
+ dev_info(&uvd->dev->dev, "Framerate (hardware): %hd.\n",
+ hw_fps);
RESTRICT_TO_RANGE(hw_fps, 0, 31);
ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps);
}
@@ -3487,7 +3497,7 @@
/* 01.01.08 - Added for RCA video in support -LO */
if(init_model3_input) {
if (debug > 0)
- info("Setting input to RCA.");
+ dev_info(&uvd->dev->dev, "Setting input to RCA.\n");
for (i=0; i < ARRAY_SIZE(initData); i++) {
ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index);
}
@@ -3685,7 +3695,7 @@
unsigned char video_ep = 0;
if (debug >= 1)
- info("ibmcam_probe(%p,%u.)", intf, ifnum);
+ dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
/* We don't handle multi-config cameras */
if (dev->descriptor.bNumConfigurations != 1)
@@ -3736,14 +3746,16 @@
brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */
break;
}
- info("%s USB camera found (model %d, rev. 0x%04x)",
- brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
+ dev_info(&uvd->dev->dev,
+ "%s USB camera found (model %d, rev. 0x%04x)\n",
+ brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
} while (0);
/* Validate found interface: must have one ISO endpoint */
nas = intf->num_altsetting;
if (debug > 0)
- info("Number of alternate settings=%d.", nas);
+ dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n",
+ nas);
if (nas < 2) {
err("Too few alternate settings for this camera!");
return -ENODEV;
@@ -3787,7 +3799,9 @@
actInterface = i;
maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
if (debug > 0)
- info("Active setting=%d. maxPS=%d.", i, maxPS);
+ dev_info(&uvd->dev->dev,
+ "Active setting=%d. "
+ "maxPS=%d.\n", i, maxPS);
} else
err("More than one active alt. setting! Ignoring #%d.", i);
}
@@ -3826,7 +3840,7 @@
RESTRICT_TO_RANGE(framerate, 0, 5);
break;
default:
- info("IBM camera: using 320x240");
+ dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n");
size = SIZE_320x240;
/* No break here */
case SIZE_320x240:
@@ -3855,7 +3869,7 @@
canvasY = 120;
break;
default:
- info("IBM NetCamera: using 176x144");
+ dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n");
size = SIZE_176x144;
/* No break here */
case SIZE_176x144:
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index 1c18028..e986c28 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -337,7 +337,8 @@
}
if((sts > 0x01) && (sts < 0x80)) {
- info("unknown status %2.2x", sts);
+ dev_info(&uvd->dev->dev, "unknown status %2.2x\n",
+ sts);
bad++;
continue;
}
@@ -568,8 +569,12 @@
fdrops = (0x80 + curframe - cam->lastframe) & 0x7F;
fdrops--;
if(fdrops) {
- info("Dropped %d frames (%d -> %d)", fdrops,
- cam->lastframe, curframe);
+ dev_info(&uvd->dev->dev,
+ "Dropped %d frames "
+ "(%d -> %d)\n",
+ fdrops,
+ cam->lastframe,
+ curframe);
}
}
cam->lastframe = curframe;
@@ -784,7 +789,8 @@
if (dev->descriptor.bNumConfigurations != 1)
return -ENODEV;
- info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice));
+ dev_info(&intf->dev, "Konica Webcam (rev. 0x%04x)\n",
+ le16_to_cpu(dev->descriptor.bcdDevice));
RESTRICT_TO_RANGE(speed, 0, MAX_SPEED);
/* Validate found interface: must have one ISO endpoint */
@@ -925,7 +931,8 @@
static int __init konicawc_init(void)
{
struct usbvideo_cb cbTbl;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
memset(&cbTbl, 0, sizeof(cbTbl));
cbTbl.probe = konicawc_probe;
cbTbl.setupOnOpen = konicawc_setup_on_open;
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 3d26a30..05c61b5 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -1080,7 +1080,8 @@
static int __init qcm_init(void)
{
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return usbvideo_register(
&cams,
diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c
index 9544e64..9714baa 100644
--- a/drivers/media/video/usbvideo/ultracam.c
+++ b/drivers/media/video/usbvideo/ultracam.c
@@ -156,10 +156,11 @@
sizeof(cp),
1000);
#if 1
- info("USB => %02x%02x%02x%02x%02x%02x%02x%02x "
- "(req=$%02x val=$%04x ind=$%04x)",
- cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
- req, value, index);
+ dev_info(&uvd->dev->dev,
+ "USB => %02x%02x%02x%02x%02x%02x%02x%02x "
+ "(req=$%02x val=$%04x ind=$%04x)\n",
+ cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
+ req, value, index);
#endif
} else {
i = usb_control_msg(
@@ -517,19 +518,20 @@
unsigned char video_ep = 0;
if (debug >= 1)
- info("ultracam_probe(%p)", intf);
+ dev_info(&intf->dev, "ultracam_probe\n");
/* We don't handle multi-config cameras */
if (dev->descriptor.bNumConfigurations != 1)
return -ENODEV;
- info("IBM Ultra camera found (rev. 0x%04x)",
- le16_to_cpu(dev->descriptor.bcdDevice));
+ dev_info(&intf->dev, "IBM Ultra camera found (rev. 0x%04x)\n",
+ le16_to_cpu(dev->descriptor.bcdDevice));
/* Validate found interface: must have one ISO endpoint */
nas = intf->num_altsetting;
if (debug > 0)
- info("Number of alternate settings=%d.", nas);
+ dev_info(&intf->dev, "Number of alternate settings=%d.\n",
+ nas);
if (nas < 8) {
err("Too few alternate settings for this camera!");
return -ENODEV;
@@ -576,7 +578,9 @@
actInterface = i;
maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
if (debug > 0)
- info("Active setting=%d. maxPS=%d.", i, maxPS);
+ dev_info(&intf->dev,
+ "Active setting=%d. "
+ "maxPS=%d.\n", i, maxPS);
} else {
/* Got another active alt. setting */
if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) {
@@ -584,8 +588,11 @@
actInterface = i;
maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
if (debug > 0) {
- info("Even better ctive setting=%d. maxPS=%d.",
- i, maxPS);
+ dev_info(&intf->dev,
+ "Even better ctive "
+ "setting=%d. "
+ "maxPS=%d.\n",
+ i, maxPS);
}
}
}
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index 9569e8c..07cd87d 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -468,8 +468,9 @@
percent = (100 * goodPackets) / allPackets;
else
percent = goodPackets / (allPackets / 100);
- info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%",
- allPackets, badPackets, percent);
+ dev_info(&uvd->dev->dev,
+ "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n",
+ allPackets, badPackets, percent);
if (uvd->iso_packet_len > 0) {
unsigned long allBytes, xferBytes;
char multiplier = ' ';
@@ -497,8 +498,9 @@
}
}
}
- info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%",
- xferBytes, multiplier, percent);
+ dev_info(&uvd->dev->dev,
+ "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n",
+ xferBytes, multiplier, percent);
}
}
}
@@ -545,7 +547,7 @@
{ /* For debugging purposes only */
char tmp[20];
usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
- info("testpattern: frame=%s", tmp);
+ dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp);
}
#endif
/* Form every scan line */
@@ -854,7 +856,7 @@
usbvideo_ClientIncModCount(uvd);
if (uvd->debug > 0)
- info("%s(%p.)", __func__, intf);
+ dev_info(&intf->dev, "%s(%p.)\n", __func__, intf);
mutex_lock(&uvd->lock);
uvd->remove_pending = 1; /* Now all ISO data will be ignored */
@@ -870,14 +872,15 @@
video_unregister_device(&uvd->vdev);
if (uvd->debug > 0)
- info("%s: Video unregistered.", __func__);
+ dev_info(&intf->dev, "%s: Video unregistered.\n", __func__);
if (uvd->user)
- info("%s: In use, disconnect pending.", __func__);
+ dev_info(&intf->dev, "%s: In use, disconnect pending.\n",
+ __func__);
else
usbvideo_CameraRelease(uvd);
mutex_unlock(&uvd->lock);
- info("USB camera disconnected.");
+ dev_info(&intf->dev, "USB camera disconnected.\n");
usbvideo_ClientDecModCount(uvd);
}
@@ -1015,14 +1018,17 @@
return -EINVAL;
}
if (uvd->video_endp == 0) {
- info("%s: No video endpoint specified; data pump disabled.", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: No video endpoint specified; data pump disabled.\n",
+ __func__);
}
if (uvd->paletteBits == 0) {
err("%s: No palettes specified!", __func__);
return -EINVAL;
}
if (uvd->defaultPalette == 0) {
- info("%s: No default palette!", __func__);
+ dev_info(&uvd->dev->dev, "%s: No default palette!\n",
+ __func__);
}
uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
@@ -1031,8 +1037,10 @@
usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
if (uvd->debug > 0) {
- info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx",
- __func__, uvd->iface, uvd->video_endp, uvd->paletteBits);
+ dev_info(&uvd->dev->dev,
+ "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n",
+ __func__, uvd->iface, uvd->video_endp,
+ uvd->paletteBits);
}
if (uvd->dev == NULL) {
err("%s: uvd->dev == NULL", __func__);
@@ -1045,12 +1053,13 @@
return -EPIPE;
}
if (uvd->debug > 1) {
- info("%s: video_register_device() successful", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: video_register_device() successful\n", __func__);
}
- info("%s on /dev/video%d: canvas=%s videosize=%s",
- (uvd->handle != NULL) ? uvd->handle->drvName : "???",
- uvd->vdev.minor, tmp2, tmp1);
+ dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n",
+ (uvd->handle != NULL) ? uvd->handle->drvName : "???",
+ uvd->vdev.minor, tmp2, tmp1);
usb_get_dev(uvd->dev);
return 0;
@@ -1112,7 +1121,7 @@
int i, errCode = 0;
if (uvd->debug > 1)
- info("%s($%p)", __func__, dev);
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
if (0 < usbvideo_ClientIncModCount(uvd))
return -ENODEV;
@@ -1179,19 +1188,25 @@
if (errCode == 0) {
if (VALID_CALLBACK(uvd, setupOnOpen)) {
if (uvd->debug > 1)
- info("%s: setupOnOpen callback", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: setupOnOpen callback\n",
+ __func__);
errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
if (errCode < 0) {
err("%s: setupOnOpen callback failed (%d.).",
__func__, errCode);
} else if (uvd->debug > 1) {
- info("%s: setupOnOpen callback successful", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: setupOnOpen callback successful\n",
+ __func__);
}
}
if (errCode == 0) {
uvd->settingsAdjusted = 0;
if (uvd->debug > 1)
- info("%s: Open succeeded.", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: Open succeeded.\n",
+ __func__);
uvd->user++;
file->private_data = uvd;
}
@@ -1201,7 +1216,8 @@
if (errCode != 0)
usbvideo_ClientDecModCount(uvd);
if (uvd->debug > 0)
- info("%s: Returning %d.", __func__, errCode);
+ dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__,
+ errCode);
return errCode;
}
@@ -1224,7 +1240,7 @@
int i;
if (uvd->debug > 1)
- info("%s($%p)", __func__, dev);
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
mutex_lock(&uvd->lock);
GET_CALLBACK(uvd, stopDataPump)(uvd);
@@ -1244,14 +1260,15 @@
uvd->user--;
if (uvd->remove_pending) {
if (uvd->debug > 0)
- info("usbvideo_v4l_close: Final disconnect.");
+ dev_info(&uvd->dev->dev, "%s: Final disconnect.\n",
+ __func__);
usbvideo_CameraRelease(uvd);
}
mutex_unlock(&uvd->lock);
usbvideo_ClientDecModCount(uvd);
if (uvd->debug > 1)
- info("%s: Completed.", __func__);
+ dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__);
file->private_data = NULL;
return 0;
}
@@ -1365,8 +1382,9 @@
struct video_mmap *vm = arg;
if (uvd->debug >= 1) {
- info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.",
- vm->frame, vm->width, vm->height, vm->format);
+ dev_info(&uvd->dev->dev,
+ "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n",
+ vm->frame, vm->width, vm->height, vm->format);
}
/*
* Check if the requested size is supported. If the requestor
@@ -1384,18 +1402,24 @@
if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
(vm->height > VIDEOSIZE_Y(uvd->canvas))) {
if (uvd->debug > 0) {
- info("VIDIOCMCAPTURE: Size=%dx%d too large; "
- "allowed only up to %ldx%ld", vm->width, vm->height,
- VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas));
+ dev_info(&uvd->dev->dev,
+ "VIDIOCMCAPTURE: Size=%dx%d "
+ "too large; allowed only up "
+ "to %ldx%ld\n", vm->width,
+ vm->height,
+ VIDEOSIZE_X(uvd->canvas),
+ VIDEOSIZE_Y(uvd->canvas));
}
return -EINVAL;
}
/* Check if the palette is supported */
if (((1L << vm->format) & uvd->paletteBits) == 0) {
if (uvd->debug > 0) {
- info("VIDIOCMCAPTURE: format=%d. not supported"
- " (paletteBits=$%08lx)",
- vm->format, uvd->paletteBits);
+ dev_info(&uvd->dev->dev,
+ "VIDIOCMCAPTURE: format=%d. "
+ "not supported "
+ "(paletteBits=$%08lx)\n",
+ vm->format, uvd->paletteBits);
}
return -EINVAL;
}
@@ -1423,7 +1447,9 @@
return -EINVAL;
if (uvd->debug >= 1)
- info("VIDIOCSYNC: syncing to frame %d.", *frameNum);
+ dev_info(&uvd->dev->dev,
+ "VIDIOCSYNC: syncing to frame %d.\n",
+ *frameNum);
if (uvd->flags & FLAGS_NO_DECODING)
ret = usbvideo_GetFrame(uvd, *frameNum);
else if (VALID_CALLBACK(uvd, getFrame)) {
@@ -1505,7 +1531,9 @@
return -EFAULT;
if (uvd->debug >= 1)
- info("%s: %Zd. bytes, noblock=%d.", __func__, count, noblock);
+ dev_info(&uvd->dev->dev,
+ "%s: %Zd. bytes, noblock=%d.\n",
+ __func__, count, noblock);
mutex_lock(&uvd->lock);
@@ -1686,18 +1714,21 @@
return;
#if 0
if (urb->actual_length > 0) {
- info("urb=$%p status=%d. errcount=%d. length=%d.",
- urb, urb->status, urb->error_count, urb->actual_length);
+ dev_info(&uvd->dev->dev,
+ "urb=$%p status=%d. errcount=%d. length=%d.\n",
+ urb, urb->status, urb->error_count,
+ urb->actual_length);
} else {
static int c = 0;
if (c++ % 100 == 0)
- info("No Isoc data");
+ dev_info(&uvd->dev->dev, "No Isoc data\n");
}
#endif
if (!uvd->streaming) {
if (uvd->debug >= 1)
- info("Not streaming, but interrupt!");
+ dev_info(&uvd->dev->dev,
+ "Not streaming, but interrupt!\n");
return;
}
@@ -1742,7 +1773,7 @@
int i, errFlag;
if (uvd->debug > 1)
- info("%s($%p)", __func__, uvd);
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
if (!CAMERA_IS_OPERATIONAL(uvd)) {
err("%s: Camera is not operational", __func__);
@@ -1790,7 +1821,9 @@
uvd->streaming = 1;
if (uvd->debug > 1)
- info("%s: streaming=1 video_endp=$%02x", __func__, uvd->video_endp);
+ dev_info(&uvd->dev->dev,
+ "%s: streaming=1 video_endp=$%02x\n", __func__,
+ uvd->video_endp);
return 0;
}
@@ -1812,14 +1845,14 @@
return;
if (uvd->debug > 1)
- info("%s($%p)", __func__, uvd);
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
/* Unschedule all of the iso td's */
for (i=0; i < USBVIDEO_NUMSBUF; i++) {
usb_kill_urb(uvd->sbuf[i].urb);
}
if (uvd->debug > 1)
- info("%s: streaming=0", __func__);
+ dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__);
uvd->streaming = 0;
if (!uvd->remove_pending) {
@@ -1851,7 +1884,8 @@
int n;
if (uvd->debug > 1)
- info("usbvideo_NewFrame($%p,%d.)", uvd, framenum);
+ dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd,
+ framenum);
/* If we're not grabbing a frame right now and the other frame is */
/* ready to be grabbed into, then use it instead */
@@ -1956,12 +1990,14 @@
struct usbvideo_frame *frame = &uvd->frame[frameNum];
if (uvd->debug >= 2)
- info("%s($%p,%d.)", __func__, uvd, frameNum);
+ dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd,
+ frameNum);
switch (frame->frameState) {
case FrameState_Unused:
if (uvd->debug >= 2)
- info("%s: FrameState_Unused", __func__);
+ dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n",
+ __func__);
return -EINVAL;
case FrameState_Ready:
case FrameState_Grabbing:
@@ -1971,7 +2007,9 @@
redo:
if (!CAMERA_IS_OPERATIONAL(uvd)) {
if (uvd->debug >= 2)
- info("%s: Camera is not operational (1)", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: Camera is not operational (1)\n",
+ __func__);
return -EIO;
}
ntries = 0;
@@ -1980,24 +2018,33 @@
signalPending = signal_pending(current);
if (!CAMERA_IS_OPERATIONAL(uvd)) {
if (uvd->debug >= 2)
- info("%s: Camera is not operational (2)", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: Camera is not "
+ "operational (2)\n", __func__);
return -EIO;
}
assert(uvd->fbuf != NULL);
if (signalPending) {
if (uvd->debug >= 2)
- info("%s: Signal=$%08x", __func__, signalPending);
+ dev_info(&uvd->dev->dev,
+ "%s: Signal=$%08x\n", __func__,
+ signalPending);
if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
usbvideo_TestPattern(uvd, 1, 0);
uvd->curframe = -1;
uvd->stats.frame_num++;
if (uvd->debug >= 2)
- info("%s: Forced test pattern screen", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: Forced test "
+ "pattern screen\n",
+ __func__);
return 0;
} else {
/* Standard answer: Interrupted! */
if (uvd->debug >= 2)
- info("%s: Interrupted!", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: Interrupted!\n",
+ __func__);
return -EINTR;
}
} else {
@@ -2011,8 +2058,10 @@
}
} while (frame->frameState == FrameState_Grabbing);
if (uvd->debug >= 2) {
- info("%s: Grabbing done; state=%d. (%lu. bytes)",
- __func__, frame->frameState, frame->seqRead_Length);
+ dev_info(&uvd->dev->dev,
+ "%s: Grabbing done; state=%d. (%lu. bytes)\n",
+ __func__, frame->frameState,
+ frame->seqRead_Length);
}
if (frame->frameState == FrameState_Error) {
int ret = usbvideo_NewFrame(uvd, frameNum);
@@ -2049,7 +2098,9 @@
}
frame->frameState = FrameState_Done_Hold;
if (uvd->debug >= 2)
- info("%s: Entered FrameState_Done_Hold state.", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: Entered FrameState_Done_Hold state.\n",
+ __func__);
return 0;
case FrameState_Done_Hold:
@@ -2060,7 +2111,9 @@
* it will be released back into the wild to roam freely.
*/
if (uvd->debug >= 2)
- info("%s: FrameState_Done_Hold state.", __func__);
+ dev_info(&uvd->dev->dev,
+ "%s: FrameState_Done_Hold state.\n",
+ __func__);
return 0;
}
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index c317ed7..b26b563 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -84,7 +84,8 @@
#ifdef USBVISION_DEBUG
#define PDEBUG(level, fmt, args...) { \
if (core_debug & (level)) \
- info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \
+ printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \
+ __func__, __LINE__ , ## args); \
}
#else
#define PDEBUG(level, fmt, args...) do {} while(0)
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index a6d0085..92427fd 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -47,7 +47,8 @@
#define PDEBUG(level, fmt, args...) { \
if (i2c_debug & (level)) \
- info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \
+ printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \
+ __func__, __LINE__ , ## args); \
}
static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf,
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 782ee64..e10b256 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -98,7 +98,8 @@
#ifdef USBVISION_DEBUG
#define PDEBUG(level, fmt, args...) { \
if (video_debug & (level)) \
- info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \
+ printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \
+ __func__, __LINE__ , ## args); \
}
#else
#define PDEBUG(level, fmt, args...) do {} while(0)
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 93991cb..7cdac99 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -52,7 +52,7 @@
/* Debug macro */
-#define DBG(x...) if (debug) info(x)
+#define DBG(x...) if (debug) printk(KERN_INFO KBUILD_MODNAME x)
/* Init methods, need to find nicer names for these
@@ -128,7 +128,7 @@
unsigned char *transfer_buffer = kmalloc(size, GFP_KERNEL);
if (!transfer_buffer) {
- info("kmalloc(%d) failed", size);
+ dev_err(&udev->dev, "kmalloc(%d) failed\n", size);
return -ENOMEM;
}
@@ -144,7 +144,8 @@
kfree(transfer_buffer);
if (status < 0)
- info("Failed sending control message, error %d.", status);
+ dev_err(&udev->dev,
+ "Failed sending control message, error %d.\n", status);
return status;
}
@@ -304,11 +305,11 @@
DBG("buffer : %d %d", cam->buffer[0], cam->buffer[1]);
DBG("bulk : n=%d size=%d", n, actual_length);
if (n < 0) {
- info("error reading bulk msg");
+ dev_err(&cam->udev->dev, "error reading bulk msg\n");
return 0;
}
if (actual_length < 0 || actual_length > BUFFER_SIZE) {
- info("wrong number of bytes");
+ dev_err(&cam->udev->dev, "wrong number of bytes\n");
return 0;
}
@@ -652,7 +653,7 @@
if (!cam->framebuf) {
cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES);
if (!cam->framebuf) {
- info("vmalloc_32 failed!");
+ dev_err(&cam->udev->dev, "vmalloc_32 failed!\n");
err = -ENOMEM;
goto out;
}
@@ -664,7 +665,8 @@
0, init[cam->method][i].bytes,
init[cam->method][i].size);
if (err < 0) {
- info("error during open sequence: %d", i);
+ dev_err(&cam->udev->dev,
+ "error during open sequence: %d\n", i);
goto out;
}
}
@@ -712,7 +714,7 @@
0, init[i][cam->method].bytes,
init[cam->method][i].size);
if (err < 0) {
- info("error during release sequence");
+ dev_err(&udev->dev, "error during release sequence\n");
goto out;
}
}
@@ -808,13 +810,14 @@
DBG("probing...");
- info(DRIVER_DESC " compatible webcam plugged");
- info("model %04x:%04x detected", udev->descriptor.idVendor,
- udev->descriptor.idProduct);
+ dev_info(&intf->dev, DRIVER_DESC " compatible webcam plugged\n");
+ dev_info(&intf->dev, "model %04x:%04x detected\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
cam = kzalloc(sizeof(struct zr364xx_camera), GFP_KERNEL);
if (cam == NULL) {
- info("cam: out of memory !");
+ dev_err(&udev->dev, "cam: out of memory !\n");
return -ENOMEM;
}
/* save the init method used by this camera */
@@ -822,7 +825,7 @@
cam->vdev = video_device_alloc();
if (cam->vdev == NULL) {
- info("cam->vdev: out of memory !");
+ dev_err(&udev->dev, "cam->vdev: out of memory !\n");
kfree(cam);
return -ENOMEM;
}
@@ -834,7 +837,7 @@
cam->udev = udev;
if ((cam->buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL)) == NULL) {
- info("cam->buffer: out of memory !");
+ dev_info(&udev->dev, "cam->buffer: out of memory !\n");
video_device_release(cam->vdev);
kfree(cam);
return -ENODEV;
@@ -842,17 +845,17 @@
switch (mode) {
case 1:
- info("160x120 mode selected");
+ dev_info(&udev->dev, "160x120 mode selected\n");
cam->width = 160;
cam->height = 120;
break;
case 2:
- info("640x480 mode selected");
+ dev_info(&udev->dev, "640x480 mode selected\n");
cam->width = 640;
cam->height = 480;
break;
default:
- info("320x240 mode selected");
+ dev_info(&udev->dev, "320x240 mode selected\n");
cam->width = 320;
cam->height = 240;
break;
@@ -872,7 +875,7 @@
err = video_register_device(cam->vdev, VFL_TYPE_GRABBER, -1);
if (err) {
- info("video_register_device failed");
+ dev_err(&udev->dev, "video_register_device failed\n");
video_device_release(cam->vdev);
kfree(cam->buffer);
kfree(cam);
@@ -881,7 +884,8 @@
usb_set_intfdata(intf, cam);
- info(DRIVER_DESC " controlling video device %d", cam->vdev->minor);
+ dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n",
+ cam->vdev->minor);
return 0;
}
@@ -891,7 +895,7 @@
struct zr364xx_camera *cam = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
dev_set_drvdata(&intf->dev, NULL);
- info(DRIVER_DESC " webcam unplugged");
+ dev_info(&intf->dev, DRIVER_DESC " webcam unplugged\n");
if (cam->vdev)
video_unregister_device(cam->vdev);
cam->vdev = NULL;
@@ -920,16 +924,16 @@
int retval;
retval = usb_register(&zr364xx_driver);
if (retval)
- info("usb_register failed!");
+ printk(KERN_ERR KBUILD_MODNAME ": usb_register failed!\n");
else
- info(DRIVER_DESC " module loaded");
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return retval;
}
static void __exit zr364xx_exit(void)
{
- info(DRIVER_DESC " module unloaded");
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC " module unloaded\n");
usb_deregister(&zr364xx_driver);
}