serial: imx: distinguish the imx6q uart from the others
We will add the DMA support for the imx uart. For the firmware's limit,
only the imx6 serial chips (including the imx6q, imx6dl, imx6sl) can
support the DMA.
This patch adds the necessary macro and helper to distinguish the
imx6q uart from the other imx uart. Other chips can use the "fsl,imx6q-uart"
to enable the DMA support.
This patch also replaces the check "is_imx21_uart()" with "!is_imx1_uart()".
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e43064b..5bce536 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -186,6 +186,7 @@
enum imx_uart_type {
IMX1_UART,
IMX21_UART,
+ IMX6Q_UART,
};
/* device type dependent stuff */
@@ -231,6 +232,10 @@
.uts_reg = IMX21_UTS,
.devtype = IMX21_UART,
},
+ [IMX6Q_UART] = {
+ .uts_reg = IMX21_UTS,
+ .devtype = IMX6Q_UART,
+ },
};
static struct platform_device_id imx_uart_devtype[] = {
@@ -241,12 +246,16 @@
.name = "imx21-uart",
.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
}, {
+ .name = "imx6q-uart",
+ .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART],
+ }, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
static struct of_device_id imx_uart_dt_ids[] = {
+ { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
{ .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
{ .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
{ /* sentinel */ }
@@ -268,6 +277,10 @@
return sport->devdata->devtype == IMX21_UART;
}
+static inline int is_imx6q_uart(struct imx_port *sport)
+{
+ return sport->devdata->devtype == IMX6Q_UART;
+}
/*
* Save and restore functions for UCR1, UCR2 and UCR3 registers
*/
@@ -800,7 +813,7 @@
}
}
- if (is_imx21_uart(sport)) {
+ if (!is_imx1_uart(sport)) {
temp = readl(sport->port.membase + UCR3);
temp |= IMX21_UCR3_RXDMUXSEL;
writel(temp, sport->port.membase + UCR3);
@@ -1043,7 +1056,7 @@
writel(num, sport->port.membase + UBIR);
writel(denom, sport->port.membase + UBMR);
- if (is_imx21_uart(sport))
+ if (!is_imx1_uart(sport))
writel(sport->port.uartclk / div / 1000,
sport->port.membase + IMX21_ONEMS);