drivers/net/bonding/: : use pr_fmt
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from pr_<level>s
Consolidate long format strings
Remove some extra tab indents
Remove some unnecessary ()s from pr_<level>s arguments
Align pr_<level> arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 4e00b4f..5acd557 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -19,6 +19,9 @@
* file called LICENSE.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
@@ -109,11 +112,10 @@
goto err_no_cmd;
if (command[0] == '+') {
- pr_info(DRV_NAME
- ": %s is being created...\n", ifname);
+ pr_info("%s is being created...\n", ifname);
rv = bond_create(net, ifname);
if (rv) {
- pr_info(DRV_NAME ": Bond creation failed.\n");
+ pr_info("Bond creation failed.\n");
res = rv;
}
} else if (command[0] == '-') {
@@ -122,12 +124,10 @@
rtnl_lock();
bond_dev = bond_get_by_name(net, ifname);
if (bond_dev) {
- pr_info(DRV_NAME ": %s is being deleted...\n",
- ifname);
+ pr_info("%s is being deleted...\n", ifname);
unregister_netdevice(bond_dev);
} else {
- pr_err(DRV_NAME ": unable to delete non-existent %s\n",
- ifname);
+ pr_err("unable to delete non-existent %s\n", ifname);
res = -ENODEV;
}
rtnl_unlock();
@@ -140,8 +140,7 @@
return res;
err_no_cmd:
- pr_err(DRV_NAME ": no command found in bonding_masters."
- " Use +ifname or -ifname.\n");
+ pr_err("no command found in bonding_masters. Use +ifname or -ifname.\n");
return -EPERM;
}
@@ -225,8 +224,8 @@
/* Quick sanity check -- is the bond interface up? */
if (!(bond->dev->flags & IFF_UP)) {
- pr_warning(DRV_NAME ": %s: doing slave updates when "
- "interface is down.\n", bond->dev->name);
+ pr_warning("%s: doing slave updates when interface is down.\n",
+ bond->dev->name);
}
/* Note: We can't hold bond->lock here, as bond_create grabs it. */
@@ -247,17 +246,14 @@
dev = __dev_get_by_name(dev_net(bond->dev), ifname);
if (!dev) {
- pr_info(DRV_NAME
- ": %s: Interface %s does not exist!\n",
- bond->dev->name, ifname);
+ pr_info("%s: Interface %s does not exist!\n",
+ bond->dev->name, ifname);
ret = -ENODEV;
goto out;
}
if (dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- ": %s: Error: Unable to enslave %s "
- "because it is already up.\n",
+ pr_err("%s: Error: Unable to enslave %s because it is already up.\n",
bond->dev->name, dev->name);
ret = -EPERM;
goto out;
@@ -266,8 +262,7 @@
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i)
if (slave->dev == dev) {
- pr_err(DRV_NAME
- ": %s: Interface %s is already enslaved!\n",
+ pr_err("%s: Interface %s is already enslaved!\n",
bond->dev->name, ifname);
ret = -EPERM;
read_unlock(&bond->lock);
@@ -275,8 +270,7 @@
}
read_unlock(&bond->lock);
- pr_info(DRV_NAME ": %s: Adding slave %s.\n",
- bond->dev->name, ifname);
+ pr_info("%s: Adding slave %s.\n", bond->dev->name, ifname);
/* If this is the first slave, then we need to set
the master's hardware address to be the same as the
@@ -313,7 +307,7 @@
break;
}
if (dev) {
- pr_info(DRV_NAME ": %s: Removing slave %s\n",
+ pr_info("%s: Removing slave %s\n",
bond->dev->name, dev->name);
res = bond_release(bond->dev, dev);
if (res) {
@@ -323,16 +317,16 @@
/* set the slave MTU to the default */
dev_set_mtu(dev, original_mtu);
} else {
- pr_err(DRV_NAME ": unable to remove non-existent"
- " slave %s for bond %s.\n",
- ifname, bond->dev->name);
+ pr_err("unable to remove non-existent slave %s for bond %s.\n",
+ ifname, bond->dev->name);
ret = -ENODEV;
}
goto out;
}
err_no_cmd:
- pr_err(DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
+ pr_err("no command found in slaves file for bond %s. Use +ifname or -ifname.\n",
+ bond->dev->name);
ret = -EPERM;
out:
@@ -365,18 +359,16 @@
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME ": unable to update mode of %s"
- " because interface is up.\n", bond->dev->name);
+ pr_err("unable to update mode of %s because interface is up.\n",
+ bond->dev->name);
ret = -EPERM;
goto out;
}
new_value = bond_parse_parm(buf, bond_mode_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid mode value %.*s.\n",
- bond->dev->name,
- (int)strlen(buf) - 1, buf);
+ pr_err("%s: Ignoring invalid mode value %.*s.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
ret = -EINVAL;
goto out;
} else {
@@ -388,8 +380,8 @@
bond->params.mode = new_value;
bond_set_mode_ops(bond, bond->params.mode);
- pr_info(DRV_NAME ": %s: setting mode to %s (%d).\n",
- bond->dev->name, bond_mode_tbl[new_value].modename,
+ pr_info("%s: setting mode to %s (%d).\n",
+ bond->dev->name, bond_mode_tbl[new_value].modename,
new_value);
}
out:
@@ -421,8 +413,7 @@
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- "%s: Interface is up. Unable to update xmit policy.\n",
+ pr_err("%s: Interface is up. Unable to update xmit policy.\n",
bond->dev->name);
ret = -EPERM;
goto out;
@@ -430,8 +421,7 @@
new_value = bond_parse_parm(buf, xmit_hashtype_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid xmit hash policy value %.*s.\n",
+ pr_err("%s: Ignoring invalid xmit hash policy value %.*s.\n",
bond->dev->name,
(int)strlen(buf) - 1, buf);
ret = -EINVAL;
@@ -439,7 +429,7 @@
} else {
bond->params.xmit_policy = new_value;
bond_set_mode_ops(bond, bond->params.mode);
- pr_info(DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
+ pr_info("%s: setting xmit hash policy to %s (%d).\n",
bond->dev->name,
xmit_hashtype_tbl[new_value].modename, new_value);
}
@@ -472,20 +462,18 @@
new_value = bond_parse_parm(buf, arp_validate_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid arp_validate value %s\n",
+ pr_err("%s: Ignoring invalid arp_validate value %s\n",
bond->dev->name, buf);
return -EINVAL;
}
if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
- pr_err(DRV_NAME
- ": %s: arp_validate only supported in active-backup mode.\n",
+ pr_err("%s: arp_validate only supported in active-backup mode.\n",
bond->dev->name);
return -EINVAL;
}
- pr_info(DRV_NAME ": %s: setting arp_validate to %s (%d).\n",
- bond->dev->name, arp_validate_tbl[new_value].modename,
- new_value);
+ pr_info("%s: setting arp_validate to %s (%d).\n",
+ bond->dev->name, arp_validate_tbl[new_value].modename,
+ new_value);
if (!bond->params.arp_validate && new_value)
bond_register_arp(bond);
@@ -523,24 +511,22 @@
struct bonding *bond = to_bond(d);
if (bond->slave_cnt != 0) {
- pr_err(DRV_NAME
- ": %s: Can't alter fail_over_mac with slaves in bond.\n",
+ pr_err("%s: Can't alter fail_over_mac with slaves in bond.\n",
bond->dev->name);
return -EPERM;
}
new_value = bond_parse_parm(buf, fail_over_mac_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid fail_over_mac value %s.\n",
+ pr_err("%s: Ignoring invalid fail_over_mac value %s.\n",
bond->dev->name, buf);
return -EINVAL;
}
bond->params.fail_over_mac = new_value;
- pr_info(DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
- bond->dev->name, fail_over_mac_tbl[new_value].modename,
- new_value);
+ pr_info("%s: Setting fail_over_mac to %s (%d).\n",
+ bond->dev->name, fail_over_mac_tbl[new_value].modename,
+ new_value);
return count;
}
@@ -571,31 +557,26 @@
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no arp_interval value specified.\n",
+ pr_err("%s: no arp_interval value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
bond->dev->name, new_value, INT_MAX);
ret = -EINVAL;
goto out;
}
- pr_info(DRV_NAME
- ": %s: Setting ARP monitoring interval to %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Setting ARP monitoring interval to %d.\n",
+ bond->dev->name, new_value);
bond->params.arp_interval = new_value;
if (bond->params.arp_interval)
bond->dev->priv_flags |= IFF_MASTER_ARPMON;
if (bond->params.miimon) {
- pr_info(DRV_NAME
- ": %s: ARP monitoring cannot be used with MII monitoring. "
- "%s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
bond->params.miimon = 0;
if (delayed_work_pending(&bond->mii_work)) {
cancel_delayed_work(&bond->mii_work);
@@ -603,10 +584,8 @@
}
}
if (!bond->params.arp_targets[0]) {
- pr_info(DRV_NAME
- ": %s: ARP monitoring has been set up, "
- "but no ARP targets have been specified.\n",
- bond->dev->name);
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
@@ -666,8 +645,7 @@
/* look for adds */
if (buf[0] == '+') {
if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
- pr_err(DRV_NAME
- ": %s: invalid ARP target %pI4 specified for addition\n",
+ pr_err("%s: invalid ARP target %pI4 specified for addition\n",
bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
@@ -675,23 +653,20 @@
/* look for an empty slot to put the target in, and check for dupes */
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) { /* duplicate */
- pr_err(DRV_NAME
- ": %s: ARP target %pI4 is already present\n",
+ pr_err("%s: ARP target %pI4 is already present\n",
bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
}
if (targets[i] == 0) {
- pr_info(DRV_NAME
- ": %s: adding ARP target %pI4.\n",
- bond->dev->name, &newtarget);
+ pr_info("%s: adding ARP target %pI4.\n",
+ bond->dev->name, &newtarget);
done = 1;
targets[i] = newtarget;
}
}
if (!done) {
- pr_err(DRV_NAME
- ": %s: ARP target table is full!\n",
+ pr_err("%s: ARP target table is full!\n",
bond->dev->name);
ret = -EINVAL;
goto out;
@@ -699,8 +674,7 @@
} else if (buf[0] == '-') {
if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
- pr_err(DRV_NAME
- ": %s: invalid ARP target %pI4 specified for removal\n",
+ pr_err("%s: invalid ARP target %pI4 specified for removal\n",
bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
@@ -709,9 +683,8 @@
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) {
int j;
- pr_info(DRV_NAME
- ": %s: removing ARP target %pI4.\n",
- bond->dev->name, &newtarget);
+ pr_info("%s: removing ARP target %pI4.\n",
+ bond->dev->name, &newtarget);
for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
targets[j] = targets[j+1];
@@ -720,16 +693,14 @@
}
}
if (!done) {
- pr_info(DRV_NAME
- ": %s: unable to remove nonexistent ARP target %pI4.\n",
- bond->dev->name, &newtarget);
+ pr_info("%s: unable to remove nonexistent ARP target %pI4.\n",
+ bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
}
} else {
- pr_err(DRV_NAME ": no command found in arp_ip_targets file"
- " for bond %s. Use +<addr> or -<addr>.\n",
- bond->dev->name);
+ pr_err("no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+ bond->dev->name);
ret = -EPERM;
goto out;
}
@@ -761,41 +732,34 @@
struct bonding *bond = to_bond(d);
if (!(bond->params.miimon)) {
- pr_err(DRV_NAME
- ": %s: Unable to set down delay as MII monitoring is disabled\n",
+ pr_err("%s: Unable to set down delay as MII monitoring is disabled\n",
bond->dev->name);
ret = -EPERM;
goto out;
}
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no down delay value specified.\n",
- bond->dev->name);
+ pr_err("%s: no down delay value specified.\n", bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+ pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
bond->dev->name, new_value, 1, INT_MAX);
ret = -EINVAL;
goto out;
} else {
if ((new_value % bond->params.miimon) != 0) {
- pr_warning(DRV_NAME
- ": %s: Warning: down delay (%d) is not a "
- "multiple of miimon (%d), delay rounded "
- "to %d ms\n",
+ pr_warning("%s: Warning: down delay (%d) is not a multiple of miimon (%d), delay rounded to %d ms\n",
bond->dev->name, new_value,
bond->params.miimon,
(new_value / bond->params.miimon) *
bond->params.miimon);
}
bond->params.downdelay = new_value / bond->params.miimon;
- pr_info(DRV_NAME ": %s: Setting down delay to %d.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
+ pr_info("%s: Setting down delay to %d.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
}
@@ -823,41 +787,35 @@
struct bonding *bond = to_bond(d);
if (!(bond->params.miimon)) {
- pr_err(DRV_NAME
- ": %s: Unable to set up delay as MII monitoring is disabled\n",
+ pr_err("%s: Unable to set up delay as MII monitoring is disabled\n",
bond->dev->name);
ret = -EPERM;
goto out;
}
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no up delay value specified.\n",
+ pr_err("%s: no up delay value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+ pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
bond->dev->name, new_value, 1, INT_MAX);
ret = -EINVAL;
goto out;
} else {
if ((new_value % bond->params.miimon) != 0) {
- pr_warning(DRV_NAME
- ": %s: Warning: up delay (%d) is not a "
- "multiple of miimon (%d), updelay rounded "
- "to %d ms\n",
+ pr_warning("%s: Warning: up delay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
bond->dev->name, new_value,
bond->params.miimon,
(new_value / bond->params.miimon) *
bond->params.miimon);
}
bond->params.updelay = new_value / bond->params.miimon;
- pr_info(DRV_NAME ": %s: Setting up delay to %d.\n",
- bond->dev->name, bond->params.updelay * bond->params.miimon);
-
+ pr_info("%s: Setting up delay to %d.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
}
out:
@@ -889,16 +847,14 @@
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- ": %s: Unable to update LACP rate because interface is up.\n",
+ pr_err("%s: Unable to update LACP rate because interface is up.\n",
bond->dev->name);
ret = -EPERM;
goto out;
}
if (bond->params.mode != BOND_MODE_8023AD) {
- pr_err(DRV_NAME
- ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
+ pr_err("%s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
bond->dev->name);
ret = -EPERM;
goto out;
@@ -908,12 +864,11 @@
if ((new_value == 1) || (new_value == 0)) {
bond->params.lacp_fast = new_value;
- pr_info(DRV_NAME ": %s: Setting LACP rate to %s (%d).\n",
+ pr_info("%s: Setting LACP rate to %s (%d).\n",
bond->dev->name, bond_lacp_tbl[new_value].modename,
new_value);
} else {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid LACP rate value %.*s.\n",
+ pr_err("%s: Ignoring invalid LACP rate value %.*s.\n",
bond->dev->name, (int)strlen(buf) - 1, buf);
ret = -EINVAL;
}
@@ -943,9 +898,8 @@
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- ": %s: Unable to update ad_select because interface "
- "is up.\n", bond->dev->name);
+ pr_err("%s: Unable to update ad_select because interface is up.\n",
+ bond->dev->name);
ret = -EPERM;
goto out;
}
@@ -954,13 +908,11 @@
if (new_value != -1) {
bond->params.ad_select = new_value;
- pr_info(DRV_NAME
- ": %s: Setting ad_select to %s (%d).\n",
- bond->dev->name, ad_select_tbl[new_value].modename,
- new_value);
+ pr_info("%s: Setting ad_select to %s (%d).\n",
+ bond->dev->name, ad_select_tbl[new_value].modename,
+ new_value);
} else {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid ad_select value %.*s.\n",
+ pr_err("%s: Ignoring invalid ad_select value %.*s.\n",
bond->dev->name, (int)strlen(buf) - 1, buf);
ret = -EINVAL;
}
@@ -990,15 +942,13 @@
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no num_grat_arp value specified.\n",
+ pr_err("%s: no num_grat_arp value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0 || new_value > 255) {
- pr_err(DRV_NAME
- ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
+ pr_err("%s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
bond->dev->name, new_value);
ret = -EINVAL;
goto out;
@@ -1031,16 +981,14 @@
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no num_unsol_na value specified.\n",
+ pr_err("%s: no num_unsol_na value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0 || new_value > 255) {
- pr_err(DRV_NAME
- ": %s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
+ pr_err("%s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
bond->dev->name, new_value);
ret = -EINVAL;
goto out;
@@ -1075,40 +1023,31 @@
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no miimon value specified.\n",
+ pr_err("%s: no miimon value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n",
+ pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
bond->dev->name, new_value, 1, INT_MAX);
ret = -EINVAL;
goto out;
} else {
- pr_info(DRV_NAME
- ": %s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
bond->params.miimon = new_value;
if (bond->params.updelay)
- pr_info(DRV_NAME
- ": %s: Note: Updating updelay (to %d) "
- "since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
if (bond->params.downdelay)
- pr_info(DRV_NAME
- ": %s: Note: Updating downdelay (to %d) "
- "since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
if (bond->params.arp_interval) {
- pr_info(DRV_NAME
- ": %s: MII monitoring cannot be used with "
- "ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
bond->params.arp_interval = 0;
bond->dev->priv_flags &= ~IFF_MASTER_ARPMON;
if (bond->params.arp_validate) {
@@ -1176,17 +1115,15 @@
write_lock_bh(&bond->curr_slave_lock);
if (!USES_PRIMARY(bond->params.mode)) {
- pr_info(DRV_NAME
- ": %s: Unable to set primary slave; %s is in mode %d\n",
- bond->dev->name, bond->dev->name, bond->params.mode);
+ pr_info("%s: Unable to set primary slave; %s is in mode %d\n",
+ bond->dev->name, bond->dev->name, bond->params.mode);
} else {
bond_for_each_slave(bond, slave, i) {
if (strnicmp
(slave->dev->name, buf,
strlen(slave->dev->name)) == 0) {
- pr_info(DRV_NAME
- ": %s: Setting %s as primary slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: Setting %s as primary slave.\n",
+ bond->dev->name, slave->dev->name);
bond->primary_slave = slave;
strcpy(bond->params.primary, slave->dev->name);
bond_select_active_slave(bond);
@@ -1197,15 +1134,13 @@
/* if we got here, then we didn't match the name of any slave */
if (strlen(buf) == 0 || buf[0] == '\n') {
- pr_info(DRV_NAME
- ": %s: Setting primary slave to None.\n",
- bond->dev->name);
+ pr_info("%s: Setting primary slave to None.\n",
+ bond->dev->name);
bond->primary_slave = NULL;
bond_select_active_slave(bond);
} else {
- pr_info(DRV_NAME
- ": %s: Unable to set %.*s as primary slave as it is not a slave.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
+ pr_info("%s: Unable to set %.*s as primary slave as it is not a slave.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
}
}
out:
@@ -1244,8 +1179,7 @@
new_value = bond_parse_parm(buf, pri_reselect_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid primary_reselect value %.*s.\n",
+ pr_err("%s: Ignoring invalid primary_reselect value %.*s.\n",
bond->dev->name,
(int) strlen(buf) - 1, buf);
ret = -EINVAL;
@@ -1253,7 +1187,7 @@
}
bond->params.primary_reselect = new_value;
- pr_info(DRV_NAME ": %s: setting primary_reselect to %s (%d).\n",
+ pr_info("%s: setting primary_reselect to %s (%d).\n",
bond->dev->name, pri_reselect_tbl[new_value].modename,
new_value);
@@ -1291,20 +1225,18 @@
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no use_carrier value specified.\n",
+ pr_err("%s: no use_carrier value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if ((new_value == 0) || (new_value == 1)) {
bond->params.use_carrier = new_value;
- pr_info(DRV_NAME ": %s: Setting use_carrier to %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Setting use_carrier to %d.\n",
+ bond->dev->name, new_value);
} else {
- pr_info(DRV_NAME
- ": %s: Ignoring invalid use_carrier value %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Ignoring invalid use_carrier value %d.\n",
+ bond->dev->name, new_value);
}
out:
return count;
@@ -1349,8 +1281,7 @@
write_lock_bh(&bond->curr_slave_lock);
if (!USES_PRIMARY(bond->params.mode))
- pr_info(DRV_NAME ": %s: Unable to change active slave;"
- " %s is in mode %d\n",
+ pr_info("%s: Unable to change active slave; %s is in mode %d\n",
bond->dev->name, bond->dev->name, bond->params.mode);
else {
bond_for_each_slave(bond, slave, i) {
@@ -1361,9 +1292,9 @@
new_active = slave;
if (new_active == old_active) {
/* do nothing */
- pr_info(DRV_NAME
- ": %s: %s is already the current active slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: %s is already the current active slave.\n",
+ bond->dev->name,
+ slave->dev->name);
goto out;
}
else {
@@ -1371,16 +1302,15 @@
(old_active) &&
(new_active->link == BOND_LINK_UP) &&
IS_UP(new_active->dev)) {
- pr_info(DRV_NAME
- ": %s: Setting %s as active slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: Setting %s as active slave.\n",
+ bond->dev->name,
+ slave->dev->name);
bond_change_active_slave(bond, new_active);
}
else {
- pr_info(DRV_NAME
- ": %s: Could not set %s as active slave; "
- "either %s is down or the link is down.\n",
- bond->dev->name, slave->dev->name,
+ pr_info("%s: Could not set %s as active slave; either %s is down or the link is down.\n",
+ bond->dev->name,
+ slave->dev->name,
slave->dev->name);
}
goto out;
@@ -1391,14 +1321,12 @@
/* if we got here, then we didn't match the name of any slave */
if (strlen(buf) == 0 || buf[0] == '\n') {
- pr_info(DRV_NAME
- ": %s: Setting active slave to None.\n",
+ pr_info("%s: Setting active slave to None.\n",
bond->dev->name);
bond->primary_slave = NULL;
bond_select_active_slave(bond);
} else {
- pr_info(DRV_NAME ": %s: Unable to set %.*s"
- " as active slave as it is not a slave.\n",
+ pr_info("%s: Unable to set %.*s as active slave as it is not a slave.\n",
bond->dev->name, (int)strlen(buf) - 1, buf);
}
}
@@ -1600,8 +1528,7 @@
/* Is someone being kinky and naming a device bonding_master? */
if (__dev_get_by_name(&init_net,
class_attr_bonding_masters.attr.name))
- pr_err("network device named %s already "
- "exists in sysfs",
+ pr_err("network device named %s already exists in sysfs",
class_attr_bonding_masters.attr.name);
ret = 0;
}