sky2: Move tx reset functionality to sky2_tx_reset()
This is pure refactoring.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a52b863..768ed47 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1811,6 +1811,31 @@
netif_tx_unlock_bh(dev);
}
+static void sky2_tx_reset(struct sky2_port* sky2)
+{
+ unsigned port = sky2->port;
+ struct sky2_hw *hw = sky2->hw;
+
+ /* Disable Force Sync bit and Enable Alloc bit */
+ sky2_write8(hw, SK_REG(port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
+ sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
+
+ /* Reset the PCI FIFO of the async Tx queue */
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
+ BMU_RST_SET | BMU_FIFO_RST);
+
+ /* Reset the Tx prefetch units */
+ sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
+ PREF_UNIT_RST_SET);
+
+ sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+}
+
/* Network shutdown */
static int sky2_down(struct net_device *dev)
{
@@ -1852,26 +1877,9 @@
&& port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
- /* Disable Force Sync bit and Enable Alloc bit */
- sky2_write8(hw, SK_REG(port, TXA_CTRL),
- TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-
- /* Stop Interval Timer and Limit Counter of Tx Arbiter */
- sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
- sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
-
- /* Reset the PCI FIFO of the async Tx queue */
- sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
- BMU_RST_SET | BMU_FIFO_RST);
-
- /* Reset the Tx prefetch units */
- sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
- PREF_UNIT_RST_SET);
-
- sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
+ sky2_tx_reset(sky2);
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
/* Force any delayed status interrrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);