[SCSI] mpt fusion: rename vdev to vdevice
common naming of vdevice through out driver
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 8081fe7..02f9590 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -644,7 +644,7 @@
SCSIIORequest_t *pScsiReq;
SCSIIOReply_t *pScsiReply;
u16 req_idx, req_idx_MR;
- VirtDevice *vdev;
+ VirtDevice *vdevice;
VirtTarget *vtarget;
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
@@ -770,10 +770,10 @@
if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
hd->sel_timeout[pScsiReq->TargetID]++;
- vdev = sc->device->hostdata;
- if (!vdev)
+ vdevice = sc->device->hostdata;
+ if (!vdevice)
break;
- vtarget = vdev->vtarget;
+ vtarget = vdevice->vtarget;
if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
mptscsih_issue_sep_command(ioc, vtarget,
MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
@@ -1359,7 +1359,7 @@
MPT_SCSI_HOST *hd;
MPT_FRAME_HDR *mf;
SCSIIORequest_t *pScsiReq;
- VirtDevice *vdev = SCpnt->device->hostdata;
+ VirtDevice *vdevice = SCpnt->device->hostdata;
int lun;
u32 datalen;
u32 scsictl;
@@ -1416,8 +1416,8 @@
/* Default to untagged. Once a target structure has been allocated,
* use the Inquiry data to determine if device supports tagged.
*/
- if (vdev
- && (vdev->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
+ if (vdevice
+ && (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
&& (SCpnt->device->tagged_supported)) {
scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
} else {
@@ -1426,10 +1426,10 @@
/* Use the above information to set up the message frame
*/
- pScsiReq->TargetID = (u8) vdev->vtarget->id;
- pScsiReq->Bus = vdev->vtarget->channel;
+ pScsiReq->TargetID = (u8) vdevice->vtarget->id;
+ pScsiReq->Bus = vdevice->vtarget->channel;
pScsiReq->ChainOffset = 0;
- if (vdev->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+ if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
else
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
@@ -1968,7 +1968,7 @@
{
MPT_SCSI_HOST *hd;
int retval;
- VirtDevice *vdev;
+ VirtDevice *vdevice;
MPT_ADAPTER *ioc;
/* If we can't locate our host adapter structure, return FAILED status.
@@ -1987,9 +1987,9 @@
if (hd->timeouts < -1)
hd->timeouts++;
- vdev = SCpnt->device->hostdata;
+ vdevice = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdev->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(ioc));
+ vdevice->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(ioc));
printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
@@ -2503,14 +2503,14 @@
static void
mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
{
- VirtDevice *vdev;
+ VirtDevice *vdevice;
SCSIIORequest_t *pReq;
u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
/* Get target structure
*/
pReq = (SCSIIORequest_t *) mf;
- vdev = sc->device->hostdata;
+ vdevice = sc->device->hostdata;
if (sense_count) {
u8 *sense_data;
@@ -2524,7 +2524,7 @@
/* Log SMART data (asc = 0x5D, non-IM case only) if required.
*/
if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
- if ((sense_data[12] == 0x5D) && (vdev->vtarget->raidVolume == 0)) {
+ if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
int idx;
MPT_ADAPTER *ioc = hd->ioc;
@@ -2542,8 +2542,8 @@
if (hd->ioc->pcidev->vendor ==
PCI_VENDOR_ID_IBM) {
mptscsih_issue_sep_command(hd->ioc,
- vdev->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
- vdev->vtarget->tflags |=
+ vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
+ vdevice->vtarget->tflags |=
MPT_TARGET_FLAGS_LED_ON;
}
}