| /* |
| * NXP LPC32xx SoC |
| * |
| * Copyright 2012 Roland Stigge <stigge@antcom.de> |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| compatible = "nxp,lpc3220"; |
| interrupt-parent = <&mic>; |
| |
| cpus { |
| cpu@0 { |
| compatible = "arm,arm926ejs"; |
| }; |
| }; |
| |
| ahb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x20000000 0x20000000 0x30000000>; |
| |
| /* |
| * Enable either SLC or MLC |
| */ |
| slc: flash@20020000 { |
| compatible = "nxp,lpc3220-slc"; |
| reg = <0x20020000 0x1000>; |
| status = "disable"; |
| }; |
| |
| mlc: flash@200a8000 { |
| compatible = "nxp,lpc3220-mlc"; |
| reg = <0x200a8000 0x11000>; |
| interrupts = <11 0>; |
| status = "disable"; |
| }; |
| |
| dma@31000000 { |
| compatible = "arm,pl080", "arm,primecell"; |
| reg = <0x31000000 0x1000>; |
| interrupts = <0x1c 0>; |
| }; |
| |
| /* |
| * Enable either ohci or usbd (gadget)! |
| */ |
| ohci@31020000 { |
| compatible = "nxp,ohci-nxp", "usb-ohci"; |
| reg = <0x31020000 0x300>; |
| interrupts = <0x3b 0>; |
| status = "disable"; |
| }; |
| |
| usbd@31020000 { |
| compatible = "nxp,lpc3220-udc"; |
| reg = <0x31020000 0x300>; |
| interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; |
| status = "disable"; |
| }; |
| |
| clcd@31040000 { |
| compatible = "arm,pl110", "arm,primecell"; |
| reg = <0x31040000 0x1000>; |
| interrupts = <0x0e 0>; |
| status = "disable"; |
| }; |
| |
| mac: ethernet@31060000 { |
| compatible = "nxp,lpc-eth"; |
| reg = <0x31060000 0x1000>; |
| interrupts = <0x1d 0>; |
| }; |
| |
| apb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x20000000 0x20000000 0x30000000>; |
| |
| ssp0: ssp@20084000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x20084000 0x1000>; |
| interrupts = <0x14 0>; |
| }; |
| |
| spi1: spi@20088000 { |
| compatible = "nxp,lpc3220-spi"; |
| reg = <0x20088000 0x1000>; |
| }; |
| |
| ssp1: ssp@2008c000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x2008c000 0x1000>; |
| interrupts = <0x15 0>; |
| }; |
| |
| spi2: spi@20090000 { |
| compatible = "nxp,lpc3220-spi"; |
| reg = <0x20090000 0x1000>; |
| }; |
| |
| i2s0: i2s@20094000 { |
| compatible = "nxp,lpc3220-i2s"; |
| reg = <0x20094000 0x1000>; |
| }; |
| |
| sd@20098000 { |
| compatible = "arm,pl180", "arm,primecell"; |
| reg = <0x20098000 0x1000>; |
| interrupts = <0x0f 0>, <0x0d 0>; |
| }; |
| |
| i2s1: i2s@2009C000 { |
| compatible = "nxp,lpc3220-i2s"; |
| reg = <0x2009C000 0x1000>; |
| }; |
| |
| uart3: serial@40080000 { |
| compatible = "nxp,serial"; |
| reg = <0x40080000 0x1000>; |
| }; |
| |
| uart4: serial@40088000 { |
| compatible = "nxp,serial"; |
| reg = <0x40088000 0x1000>; |
| }; |
| |
| uart5: serial@40090000 { |
| compatible = "nxp,serial"; |
| reg = <0x40090000 0x1000>; |
| }; |
| |
| uart6: serial@40098000 { |
| compatible = "nxp,serial"; |
| reg = <0x40098000 0x1000>; |
| }; |
| |
| i2c1: i2c@400A0000 { |
| compatible = "nxp,pnx-i2c"; |
| reg = <0x400A0000 0x100>; |
| interrupts = <0x33 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pnx,timeout = <0x64>; |
| }; |
| |
| i2c2: i2c@400A8000 { |
| compatible = "nxp,pnx-i2c"; |
| reg = <0x400A8000 0x100>; |
| interrupts = <0x32 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pnx,timeout = <0x64>; |
| }; |
| |
| i2cusb: i2c@31020300 { |
| compatible = "nxp,pnx-i2c"; |
| reg = <0x31020300 0x100>; |
| interrupts = <0x3f 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pnx,timeout = <0x64>; |
| }; |
| }; |
| |
| fab { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x20000000 0x20000000 0x30000000>; |
| |
| /* |
| * MIC Interrupt controller includes: |
| * MIC @40008000 |
| * SIC1 @4000C000 |
| * SIC2 @40010000 |
| */ |
| mic: interrupt-controller@40008000 { |
| compatible = "nxp,lpc3220-mic"; |
| interrupt-controller; |
| reg = <0x40008000 0xC000>; |
| #interrupt-cells = <2>; |
| }; |
| |
| uart1: serial@40014000 { |
| compatible = "nxp,serial"; |
| reg = <0x40014000 0x1000>; |
| }; |
| |
| uart2: serial@40018000 { |
| compatible = "nxp,serial"; |
| reg = <0x40018000 0x1000>; |
| }; |
| |
| uart7: serial@4001C000 { |
| compatible = "nxp,serial"; |
| reg = <0x4001C000 0x1000>; |
| }; |
| |
| rtc@40024000 { |
| compatible = "nxp,lpc3220-rtc"; |
| reg = <0x40024000 0x1000>; |
| interrupts = <0x34 0>; |
| }; |
| |
| gpio: gpio@40028000 { |
| compatible = "nxp,lpc3220-gpio"; |
| reg = <0x40028000 0x1000>; |
| gpio-controller; |
| #gpio-cells = <3>; /* bank, pin, flags */ |
| }; |
| |
| watchdog@4003C000 { |
| compatible = "nxp,pnx4008-wdt"; |
| reg = <0x4003C000 0x1000>; |
| }; |
| |
| /* |
| * TSC vs. ADC: Since those two share the same |
| * hardware, you need to choose from one of the |
| * following two and do 'status = "okay";' for one of |
| * them |
| */ |
| |
| adc@40048000 { |
| compatible = "nxp,lpc3220-adc"; |
| reg = <0x40048000 0x1000>; |
| interrupts = <0x27 0>; |
| status = "disable"; |
| }; |
| |
| tsc@40048000 { |
| compatible = "nxp,lpc3220-tsc"; |
| reg = <0x40048000 0x1000>; |
| interrupts = <0x27 0>; |
| status = "disable"; |
| }; |
| |
| key@40050000 { |
| compatible = "nxp,lpc3220-key"; |
| reg = <0x40050000 0x1000>; |
| interrupts = <54 0>; |
| status = "disabled"; |
| }; |
| |
| }; |
| }; |
| }; |