jme: Added half-duplex mode and IPv6 RSS fix
1. Set bit 5 of GPREG1 to 1 to enable hardware workaround for half-duplex
mode. Which the MAC processor generates CRS/COL by itself instead of
receive it from PHY processor.
2. Set bit 6 of GPREG1 to 1 to enable hardware workaround that masks the
MAC processor working right while calculating IPv6 RSS in 10/100
mode.
3. Group the workaround codes all together.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index b296884..9fdf20a 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -964,6 +964,36 @@
};
/*
+ * General Purpose REG-1
+ * Note: All theses bits defined here are for
+ * Chip mode revision 0x11 only
+ */
+enum jme_gpreg1_masks {
+ GPREG1_INTRDELAYUNIT = 0x00000018,
+ GPREG1_INTRDELAYENABLE = 0x00000007,
+};
+
+enum jme_gpreg1_vals {
+ GPREG1_RSSPATCH = 0x00000040,
+ GPREG1_HALFMODEPATCH = 0x00000020,
+
+ GPREG1_INTDLYUNIT_16NS = 0x00000000,
+ GPREG1_INTDLYUNIT_256NS = 0x00000008,
+ GPREG1_INTDLYUNIT_1US = 0x00000010,
+ GPREG1_INTDLYUNIT_16US = 0x00000018,
+
+ GPREG1_INTDLYEN_1U = 0x00000001,
+ GPREG1_INTDLYEN_2U = 0x00000002,
+ GPREG1_INTDLYEN_3U = 0x00000003,
+ GPREG1_INTDLYEN_4U = 0x00000004,
+ GPREG1_INTDLYEN_5U = 0x00000005,
+ GPREG1_INTDLYEN_6U = 0x00000006,
+ GPREG1_INTDLYEN_7U = 0x00000007,
+
+ GPREG1_DEFAULT = 0x00000000,
+};
+
+/*
* Interrupt Status Bits
*/
enum jme_interrupt_bits {