[media] anysee: switch to RC core
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 4685259..1759d26 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -354,7 +354,7 @@
static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
{
struct anysee_state *state = adap->dev->priv;
- deb_info("%s: \n", __func__);
+ deb_info("%s:\n", __func__);
switch (state->tuner) {
case DVB_PLL_THOMSON_DTT7579:
@@ -374,78 +374,32 @@
return 0;
}
-static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+static int anysee_rc_query(struct dvb_usb_device *d)
{
u8 buf[] = {CMD_GET_IR_CODE};
- struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
u8 ircode[2];
- int i, ret;
+ int ret;
- ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2);
+ /* Remote controller is basic NEC using address byte 0x08.
+ Anysee device RC query returns only two bytes, status and code,
+ address byte is dropped. Also it does not return any value for
+ NEC RCs having address byte other than 0x08. Due to that, we
+ cannot use that device as standard NEC receiver.
+ It could be possible make hack which reads whole code directly
+ from device memory... */
+
+ ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
if (ret)
return ret;
- *event = 0;
- *state = REMOTE_NO_KEY_PRESSED;
-
- for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
- if (rc5_custom(&keymap[i]) == ircode[0] &&
- rc5_data(&keymap[i]) == ircode[1]) {
- *event = keymap[i].keycode;
- *state = REMOTE_KEY_PRESSED;
- return 0;
- }
+ if (ircode[0]) {
+ deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
+ ir_keydown(d->rc_input_dev, 0x08 << 8 | ircode[1], 0);
}
+
return 0;
}
-static struct ir_scancode ir_codes_anysee_table[] = {
- { 0x0100, KEY_0 },
- { 0x0101, KEY_1 },
- { 0x0102, KEY_2 },
- { 0x0103, KEY_3 },
- { 0x0104, KEY_4 },
- { 0x0105, KEY_5 },
- { 0x0106, KEY_6 },
- { 0x0107, KEY_7 },
- { 0x0108, KEY_8 },
- { 0x0109, KEY_9 },
- { 0x010a, KEY_POWER },
- { 0x010b, KEY_DOCUMENTS }, /* * */
- { 0x0119, KEY_FAVORITES },
- { 0x0120, KEY_SLEEP },
- { 0x0121, KEY_MODE }, /* 4:3 / 16:9 select */
- { 0x0122, KEY_ZOOM },
- { 0x0147, KEY_TEXT },
- { 0x0116, KEY_TV }, /* TV / radio select */
- { 0x011e, KEY_LANGUAGE }, /* Second Audio Program */
- { 0x011a, KEY_SUBTITLE },
- { 0x011b, KEY_CAMERA }, /* screenshot */
- { 0x0142, KEY_MUTE },
- { 0x010e, KEY_MENU },
- { 0x010f, KEY_EPG },
- { 0x0117, KEY_INFO },
- { 0x0110, KEY_EXIT },
- { 0x0113, KEY_VOLUMEUP },
- { 0x0112, KEY_VOLUMEDOWN },
- { 0x0111, KEY_CHANNELUP },
- { 0x0114, KEY_CHANNELDOWN },
- { 0x0115, KEY_OK },
- { 0x011d, KEY_RED },
- { 0x011f, KEY_GREEN },
- { 0x011c, KEY_YELLOW },
- { 0x0144, KEY_BLUE },
- { 0x010c, KEY_SHUFFLE }, /* snapshot */
- { 0x0148, KEY_STOP },
- { 0x0150, KEY_PLAY },
- { 0x0151, KEY_PAUSE },
- { 0x0149, KEY_RECORD },
- { 0x0118, KEY_PREVIOUS }, /* |<< */
- { 0x010d, KEY_NEXT }, /* >>| */
- { 0x0124, KEY_PROG1 }, /* F1 */
- { 0x0125, KEY_PROG2 }, /* F2 */
-};
-
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties anysee_properties;
@@ -520,11 +474,12 @@
}
},
- .rc.legacy = {
- .rc_key_map = ir_codes_anysee_table,
- .rc_key_map_size = ARRAY_SIZE(ir_codes_anysee_table),
+ .rc.core = {
+ .rc_codes = RC_MAP_ANYSEE,
+ .protocol = IR_TYPE_OTHER,
+ .module_name = "anysee",
.rc_query = anysee_rc_query,
- .rc_interval = 200, /* windows driver uses 500ms */
+ .rc_interval = 250, /* windows driver uses 500ms */
},
.i2c_algo = &anysee_i2c_algo,