sb1000.c: stop inlining largish static functions
drivers/net/sb1000.c has lots of inlined static functions.
Mst of them are used at initialization, wait for some
hardware register to change (wait using yield, sleep etc),
or do slow port-based I/O. Inlining thse "for speed" makes no sense.
This patch removes "inline" from biggest static function
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).
Size difference for 32bit x86:
text data bss dec hex filename
6299 129 0 6428 191c linux-2.6-ALLYES/drivers/net/sb1000.o
5418 129 0 5547 15ab linux-2.6.inline-ALLYES/drivers/net/sb1000.o
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index 487f9d2..829d0ea 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -88,31 +88,31 @@
/* SB1000 hardware routines to be used during open/configuration phases */
-static inline int card_wait_for_busy_clear(const int ioaddr[],
+static int card_wait_for_busy_clear(const int ioaddr[],
const char* name);
-static inline int card_wait_for_ready(const int ioaddr[], const char* name,
+static int card_wait_for_ready(const int ioaddr[], const char* name,
unsigned char in[]);
static int card_send_command(const int ioaddr[], const char* name,
const unsigned char out[], unsigned char in[]);
/* SB1000 hardware routines to be used during frame rx interrupt */
-static inline int sb1000_wait_for_ready(const int ioaddr[], const char* name);
-static inline int sb1000_wait_for_ready_clear(const int ioaddr[],
+static int sb1000_wait_for_ready(const int ioaddr[], const char* name);
+static int sb1000_wait_for_ready_clear(const int ioaddr[],
const char* name);
-static inline void sb1000_send_command(const int ioaddr[], const char* name,
+static void sb1000_send_command(const int ioaddr[], const char* name,
const unsigned char out[]);
-static inline void sb1000_read_status(const int ioaddr[], unsigned char in[]);
-static inline void sb1000_issue_read_command(const int ioaddr[],
+static void sb1000_read_status(const int ioaddr[], unsigned char in[]);
+static void sb1000_issue_read_command(const int ioaddr[],
const char* name);
/* SB1000 commands for open/configuration */
-static inline int sb1000_reset(const int ioaddr[], const char* name);
-static inline int sb1000_check_CRC(const int ioaddr[], const char* name);
+static int sb1000_reset(const int ioaddr[], const char* name);
+static int sb1000_check_CRC(const int ioaddr[], const char* name);
static inline int sb1000_start_get_set_command(const int ioaddr[],
const char* name);
-static inline int sb1000_end_get_set_command(const int ioaddr[],
+static int sb1000_end_get_set_command(const int ioaddr[],
const char* name);
-static inline int sb1000_activate(const int ioaddr[], const char* name);
+static int sb1000_activate(const int ioaddr[], const char* name);
static int sb1000_get_firmware_version(const int ioaddr[],
const char* name, unsigned char version[], int do_end);
static int sb1000_get_frequency(const int ioaddr[], const char* name,
@@ -125,8 +125,8 @@
const short PID[]);
/* SB1000 commands for frame rx interrupt */
-static inline int sb1000_rx(struct net_device *dev);
-static inline void sb1000_error_dpc(struct net_device *dev);
+static int sb1000_rx(struct net_device *dev);
+static void sb1000_error_dpc(struct net_device *dev);
static const struct pnp_device_id sb1000_pnp_ids[] = {
{ "GIC1000", 0 },
@@ -250,7 +250,7 @@
static const int TimeOutJiffies = (875 * HZ) / 100;
/* Card Wait For Busy Clear (cannot be used during an interrupt) */
-static inline int
+static int
card_wait_for_busy_clear(const int ioaddr[], const char* name)
{
unsigned char a;
@@ -274,7 +274,7 @@
}
/* Card Wait For Ready (cannot be used during an interrupt) */
-static inline int
+static int
card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
{
unsigned char a;
@@ -354,7 +354,7 @@
static const int Sb1000TimeOutJiffies = 7 * HZ;
/* Card Wait For Ready (to be used during frame rx) */
-static inline int
+static int
sb1000_wait_for_ready(const int ioaddr[], const char* name)
{
unsigned long timeout;
@@ -380,7 +380,7 @@
}
/* Card Wait For Ready Clear (to be used during frame rx) */
-static inline int
+static int
sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
{
unsigned long timeout;
@@ -405,7 +405,7 @@
}
/* Card Send Command (to be used during frame rx) */
-static inline void
+static void
sb1000_send_command(const int ioaddr[], const char* name,
const unsigned char out[])
{
@@ -422,7 +422,7 @@
}
/* Card Read Status (to be used during frame rx) */
-static inline void
+static void
sb1000_read_status(const int ioaddr[], unsigned char in[])
{
in[1] = inb(ioaddr[0] + 1);
@@ -434,7 +434,7 @@
}
/* Issue Read Command (to be used during frame rx) */
-static inline void
+static void
sb1000_issue_read_command(const int ioaddr[], const char* name)
{
const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
@@ -450,7 +450,7 @@
* SB1000 commands for open/configuration
*/
/* reset SB1000 card */
-static inline int
+static int
sb1000_reset(const int ioaddr[], const char* name)
{
unsigned char st[7];
@@ -479,7 +479,7 @@
}
/* check SB1000 firmware CRC */
-static inline int
+static int
sb1000_check_CRC(const int ioaddr[], const char* name)
{
unsigned char st[7];
@@ -504,7 +504,7 @@
return card_send_command(ioaddr, name, Command0, st);
}
-static inline int
+static int
sb1000_end_get_set_command(const int ioaddr[], const char* name)
{
unsigned char st[7];
@@ -517,7 +517,7 @@
return card_send_command(ioaddr, name, Command1, st);
}
-static inline int
+static int
sb1000_activate(const int ioaddr[], const char* name)
{
unsigned char st[7];
@@ -694,7 +694,7 @@
}
-static inline void
+static void
sb1000_print_status_buffer(const char* name, unsigned char st[],
unsigned char buffer[], int size)
{
@@ -725,7 +725,7 @@
/* receive a single frame and assemble datagram
* (this is the heart of the interrupt routine)
*/
-static inline int
+static int
sb1000_rx(struct net_device *dev)
{
@@ -888,7 +888,7 @@
return -1;
}
-static inline void
+static void
sb1000_error_dpc(struct net_device *dev)
{
char *name;