spi: tegra: convert to standard DMA DT bindings
By using dma_request_slave_channel_or_err(), the DMA slave ID can be
looked up from standard DT properties, and squirrelled away during
channel allocation. Hence, there's no need to use a custom DT property
to store the slave ID.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 1305b8f..dd6f26c 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -171,7 +171,6 @@
void __iomem *base;
phys_addr_t phys;
unsigned irq;
- int dma_req_sel;
u32 spi_max_frequency;
u32 cur_speed;
@@ -630,15 +629,15 @@
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!dma_chan) {
- dev_err(tspi->dev,
- "Dma channel is not available, will try later\n");
- return -EPROBE_DEFER;
+ dma_chan = dma_request_slave_channel(tspi->dev,
+ dma_to_memory ? "rx" : "tx");
+ if (IS_ERR(dma_chan)) {
+ ret = PTR_ERR(dma_chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(tspi->dev,
+ "Dma channel is not available: %d\n", ret);
+ return ret;
}
dma_buf = dma_alloc_coherent(tspi->dev, tspi->dma_buf_size,
@@ -649,7 +648,6 @@
return -ENOMEM;
}
- dma_sconfig.slave_id = tspi->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1021,11 +1019,6 @@
static void tegra_slink_parse_dt(struct tegra_slink_data *tspi)
{
struct device_node *np = tspi->dev->of_node;
- u32 of_dma[2];
-
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0)
- tspi->dma_req_sel = of_dma[1];
if (of_property_read_u32(np, "spi-max-frequency",
&tspi->spi_max_frequency))
@@ -1129,22 +1122,15 @@
tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
- if (tspi->dma_req_sel) {
- ret = tegra_slink_init_dma_param(tspi, true);
- if (ret < 0) {
- dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
- goto exit_free_irq;
- }
-
- ret = tegra_slink_init_dma_param(tspi, false);
- if (ret < 0) {
- dev_err(&pdev->dev, "TxDma Init failed, err %d\n", ret);
- goto exit_rx_dma_free;
- }
- tspi->max_buf_size = tspi->dma_buf_size;
- init_completion(&tspi->tx_dma_complete);
- init_completion(&tspi->rx_dma_complete);
- }
+ ret = tegra_slink_init_dma_param(tspi, true);
+ if (ret < 0)
+ goto exit_free_irq;
+ ret = tegra_slink_init_dma_param(tspi, false);
+ if (ret < 0)
+ goto exit_rx_dma_free;
+ tspi->max_buf_size = tspi->dma_buf_size;
+ init_completion(&tspi->tx_dma_complete);
+ init_completion(&tspi->rx_dma_complete);
init_completion(&tspi->xfer_completion);