drm/i915: Refactor panel backlight controls
There were two instances of code to control the panel backlight and
neither handled the complete set of device variations.
Fixes:
Bug 29716 - [GM965] Regression: Backlight resets to minimum when changing resolution
https://bugs.freedesktop.org/show_bug.cgi?id=29716
And a bug on one of my PineView boxes which overflowed the backlight
value.
Incorporates part of a similar patch by Matthew Garrett that exposes a
native Intel backlight controller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 3cb1323..917c7dc 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -31,9 +31,9 @@
#include "drmP.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "intel_drv.h"
#define PCI_ASLE 0xe4
-#define PCI_LBPC 0xf4
#define PCI_ASLS 0xfc
#define OPREGION_HEADER_OFFSET 0
@@ -147,36 +147,17 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
- u32 blc_pwm_ctl, blc_pwm_ctl2;
- u32 max_backlight, level, shift;
+ u32 max;
if (!(bclp & ASLE_BCLP_VALID))
return ASLE_BACKLIGHT_FAILED;
bclp &= ASLE_BCLP_MSK;
- if (bclp < 0 || bclp > 255)
+ if (bclp > 255)
return ASLE_BACKLIGHT_FAILED;
- blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
- blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
-
- if (IS_I965G(dev) && (blc_pwm_ctl2 & BLM_COMBINATION_MODE))
- pci_write_config_dword(dev->pdev, PCI_LBPC, bclp);
- else {
- if (IS_PINEVIEW(dev)) {
- blc_pwm_ctl &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
- max_backlight = (blc_pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT;
- shift = BACKLIGHT_DUTY_CYCLE_SHIFT + 1;
- } else {
- blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
- max_backlight = ((blc_pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
- shift = BACKLIGHT_DUTY_CYCLE_SHIFT;
- }
- level = (bclp * max_backlight) / 255;
- I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | (level << shift));
- }
+ max = intel_panel_get_max_backlight(dev);
+ intel_panel_set_backlight(dev, bclp * max / 255);
asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
return 0;
@@ -243,36 +224,6 @@
asle->aslc = asle_stat;
}
-static u32 asle_set_backlight_ironlake(struct drm_device *dev, u32 bclp)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct opregion_asle *asle = dev_priv->opregion.asle;
- u32 cpu_pwm_ctl, pch_pwm_ctl2;
- u32 max_backlight, level;
-
- if (!(bclp & ASLE_BCLP_VALID))
- return ASLE_BACKLIGHT_FAILED;
-
- bclp &= ASLE_BCLP_MSK;
- if (bclp < 0 || bclp > 255)
- return ASLE_BACKLIGHT_FAILED;
-
- cpu_pwm_ctl = I915_READ(BLC_PWM_CPU_CTL);
- pch_pwm_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
- /* get the max PWM frequency */
- max_backlight = (pch_pwm_ctl2 >> 16) & BACKLIGHT_DUTY_CYCLE_MASK;
- /* calculate the expected PMW frequency */
- level = (bclp * max_backlight) / 255;
- /* reserve the high 16 bits */
- cpu_pwm_ctl &= ~(BACKLIGHT_DUTY_CYCLE_MASK);
- /* write the updated PWM frequency */
- I915_WRITE(BLC_PWM_CPU_CTL, cpu_pwm_ctl | level);
-
- asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
-
- return 0;
-}
-
/* Only present on Ironlake+ */
void intel_opregion_gse_intr(struct drm_device *dev)
{
@@ -297,7 +248,7 @@
}
if (asle_req & ASLE_SET_BACKLIGHT)
- asle_stat |= asle_set_backlight_ironlake(dev, asle->bclp);
+ asle_stat |= asle_set_backlight(dev, asle->bclp);
if (asle_req & ASLE_SET_PFIT) {
DRM_DEBUG_DRIVER("Pfit is not supported\n");