| /* |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* AM437x GP EVM */ |
| |
| /dts-v1/; |
| |
| #include "am4372.dtsi" |
| #include <dt-bindings/pinctrl/am43xx.h> |
| #include <dt-bindings/pwm/pwm.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "TI AM437x GP EVM"; |
| compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; |
| |
| aliases { |
| display0 = &lcd0; |
| }; |
| |
| evm_v3_3d: fixedregulator-v3_3d { |
| compatible = "regulator-fixed"; |
| regulator-name = "evm_v3_3d"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| }; |
| |
| vtt_fixed: fixedregulator-vtt { |
| compatible = "regulator-fixed"; |
| regulator-name = "vtt_fixed"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| vmmcwl_fixed: fixedregulator-mmcwl { |
| compatible = "regulator-fixed"; |
| regulator-name = "vmmcwl_fixed"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; |
| brightness-levels = <0 51 53 56 62 75 101 152 255>; |
| default-brightness-level = <8>; |
| }; |
| |
| matrix_keypad: matrix_keypad0 { |
| compatible = "gpio-matrix-keypad"; |
| debounce-delay-ms = <5>; |
| col-scan-delay-us = <2>; |
| |
| row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ |
| &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ |
| &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ |
| |
| col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */ |
| &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */ |
| |
| linux,keymap = <0x00000201 /* P1 */ |
| 0x00010202 /* P2 */ |
| 0x01000067 /* UP */ |
| 0x0101006a /* RIGHT */ |
| 0x02000069 /* LEFT */ |
| 0x0201006c>; /* DOWN */ |
| }; |
| |
| lcd0: display { |
| compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; |
| label = "lcd"; |
| |
| panel-timing { |
| clock-frequency = <33000000>; |
| hactive = <800>; |
| vactive = <480>; |
| hfront-porch = <210>; |
| hback-porch = <16>; |
| hsync-len = <30>; |
| vback-porch = <10>; |
| vfront-porch = <22>; |
| vsync-len = <13>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| port { |
| lcd_in: endpoint { |
| remote-endpoint = <&dpi_out>; |
| }; |
| }; |
| }; |
| |
| /* fixed 12MHz oscillator */ |
| refclk: oscillator { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <12000000>; |
| }; |
| |
| /* fixed 32k external oscillator clock */ |
| clk_32k_rtc: clk_32k_rtc { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| sound0: sound0 { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "AM437x-GP-EVM"; |
| simple-audio-card,widgets = |
| "Headphone", "Headphone Jack", |
| "Line", "Line In"; |
| simple-audio-card,routing = |
| "Headphone Jack", "HPLOUT", |
| "Headphone Jack", "HPROUT", |
| "LINE1L", "Line In", |
| "LINE1R", "Line In"; |
| simple-audio-card,format = "dsp_b"; |
| simple-audio-card,bitclock-master = <&sound0_master>; |
| simple-audio-card,frame-master = <&sound0_master>; |
| simple-audio-card,bitclock-inversion; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&mcasp1>; |
| system-clock-frequency = <12000000>; |
| }; |
| |
| sound0_master: simple-audio-card,codec { |
| sound-dai = <&tlv320aic3106>; |
| system-clock-frequency = <12000000>; |
| }; |
| }; |
| }; |
| |
| &am43xx_pinmux { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&wlan_pins_default>; |
| pinctrl-1 = <&wlan_pins_sleep>; |
| |
| i2c0_pins: i2c0_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ |
| AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ |
| >; |
| }; |
| |
| i2c1_pins: i2c1_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ |
| AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ |
| >; |
| }; |
| |
| mmc1_pins: pinmux_mmc1_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ |
| >; |
| }; |
| |
| ecap0_pins: backlight_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ |
| >; |
| }; |
| |
| pixcir_ts_pins: pixcir_ts_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ |
| >; |
| }; |
| |
| cpsw_default: cpsw_default { |
| pinctrl-single,pins = < |
| /* Slave 1 */ |
| AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ |
| AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ |
| AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ |
| AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ |
| AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ |
| AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ |
| AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ |
| AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ |
| AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ |
| AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ |
| AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ |
| AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ |
| >; |
| }; |
| |
| cpsw_sleep: cpsw_sleep { |
| pinctrl-single,pins = < |
| /* Slave 1 reset value */ |
| AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| >; |
| }; |
| |
| davinci_mdio_default: davinci_mdio_default { |
| pinctrl-single,pins = < |
| /* MDIO */ |
| AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ |
| AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ |
| >; |
| }; |
| |
| davinci_mdio_sleep: davinci_mdio_sleep { |
| pinctrl-single,pins = < |
| /* MDIO reset value */ |
| AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| >; |
| }; |
| |
| nand_flash_x8: nand_flash_x8 { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ |
| AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ |
| AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ |
| AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ |
| AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ |
| AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ |
| AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ |
| AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ |
| AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ |
| AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ |
| AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ |
| AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ |
| AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ |
| AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ |
| AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ |
| >; |
| }; |
| |
| dss_pins: dss_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ |
| AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) |
| AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) |
| AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) |
| AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) |
| AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) |
| AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) |
| AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ |
| AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ |
| AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ |
| AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ |
| AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ |
| AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ |
| AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ |
| |
| >; |
| }; |
| |
| display_mux_pins: display_mux_pins { |
| pinctrl-single,pins = < |
| /* GPIO 5_8 to select LCD / HDMI */ |
| AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7) |
| >; |
| }; |
| |
| dcan0_default: dcan0_default_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ |
| AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ |
| >; |
| }; |
| |
| dcan0_sleep: dcan0_sleep_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ |
| AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ |
| >; |
| }; |
| |
| dcan1_default: dcan1_default_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ |
| AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ |
| >; |
| }; |
| |
| dcan1_sleep: dcan1_sleep_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ |
| AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ |
| >; |
| }; |
| |
| vpfe0_pins_default: vpfe0_pins_default { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ |
| AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ |
| AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ |
| AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ |
| AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ |
| AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ |
| AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ |
| AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ |
| AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ |
| AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ |
| AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ |
| AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ |
| AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ |
| >; |
| }; |
| |
| vpfe0_pins_sleep: vpfe0_pins_sleep { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ |
| AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ |
| AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ |
| AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ |
| AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ |
| AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ |
| AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ |
| AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ |
| AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ |
| AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ |
| AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ |
| AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ |
| AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ |
| >; |
| }; |
| |
| vpfe1_pins_default: vpfe1_pins_default { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ |
| AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ |
| AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ |
| AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ |
| AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ |
| AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ |
| AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ |
| AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ |
| AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ |
| AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ |
| AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ |
| AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ |
| AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ |
| >; |
| }; |
| |
| vpfe1_pins_sleep: vpfe1_pins_sleep { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ |
| AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ |
| AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ |
| AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ |
| AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ |
| AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ |
| AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ |
| AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ |
| AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ |
| AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ |
| AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ |
| AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ |
| AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ |
| >; |
| }; |
| |
| mmc3_pins_default: pinmux_mmc3_pins_default { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ |
| AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ |
| AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ |
| AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ |
| AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ |
| AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ |
| >; |
| }; |
| |
| mmc3_pins_sleep: pinmux_mmc3_pins_sleep { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ |
| AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ |
| AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ |
| AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ |
| AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ |
| AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ |
| >; |
| }; |
| |
| wlan_pins_default: pinmux_wlan_pins_default { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ |
| AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ |
| AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ |
| >; |
| }; |
| |
| wlan_pins_sleep: pinmux_wlan_pins_sleep { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ |
| AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ |
| AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ |
| >; |
| }; |
| |
| uart3_pins: uart3_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ |
| AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ |
| AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ |
| AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ |
| >; |
| }; |
| |
| mcasp1_pins: mcasp1_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ |
| AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ |
| AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ |
| AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ |
| >; |
| }; |
| |
| mcasp1_sleep_pins: mcasp1_sleep_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| >; |
| }; |
| |
| gpio0_pins: gpio0_pins { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ |
| >; |
| }; |
| |
| emmc_pins_default: emmc_pins_default { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ |
| AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ |
| AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ |
| AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ |
| AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ |
| AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ |
| AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ |
| AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ |
| AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ |
| AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ |
| >; |
| }; |
| |
| emmc_pins_sleep: emmc_pins_sleep { |
| pinctrl-single,pins = < |
| AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ |
| AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ |
| AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */ |
| AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */ |
| AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ |
| AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ |
| AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ |
| AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ |
| AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ |
| AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ |
| >; |
| }; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| clock-frequency = <100000>; |
| |
| tps65218: tps65218@24 { |
| reg = <0x24>; |
| compatible = "ti,tps65218"; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| dcdc1: regulator-dcdc1 { |
| regulator-name = "vdd_core"; |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <1144000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| dcdc2: regulator-dcdc2 { |
| regulator-name = "vdd_mpu"; |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <1378000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| dcdc3: regulator-dcdc3 { |
| regulator-name = "vdcdc3"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| regulator-state-disk { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| dcdc5: regulator-dcdc5 { |
| regulator-name = "v1_0bat"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| dcdc6: regulator-dcdc6 { |
| regulator-name = "v1_8bat"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| ldo1: regulator-ldo1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| ov2659@30 { |
| compatible = "ovti,ov2659"; |
| reg = <0x30>; |
| |
| clocks = <&refclk 0>; |
| clock-names = "xvclk"; |
| |
| port { |
| ov2659_0: endpoint { |
| remote-endpoint = <&vpfe1_ep>; |
| link-frequencies = /bits/ 64 <70000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| pixcir_ts@5c { |
| compatible = "pixcir,pixcir_tangoc"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pixcir_ts_pins>; |
| reg = <0x5c>; |
| |
| attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| |
| /* |
| * 0x264 represents the offset of padconf register of |
| * gpio3_22 from am43xx_pinmux base. |
| */ |
| interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, |
| <&am43xx_pinmux 0x264>; |
| interrupt-names = "tsc", "wakeup"; |
| |
| touchscreen-size-x = <1024>; |
| touchscreen-size-y = <600>; |
| wakeup-source; |
| }; |
| |
| ov2659@30 { |
| compatible = "ovti,ov2659"; |
| reg = <0x30>; |
| |
| clocks = <&refclk 0>; |
| clock-names = "xvclk"; |
| |
| port { |
| ov2659_1: endpoint { |
| remote-endpoint = <&vpfe0_ep>; |
| link-frequencies = /bits/ 64 <70000000>; |
| }; |
| }; |
| }; |
| |
| tlv320aic3106: tlv320aic3106@1b { |
| #sound-dai-cells = <0>; |
| compatible = "ti,tlv320aic3106"; |
| reg = <0x1b>; |
| status = "okay"; |
| |
| /* Regulators */ |
| IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */ |
| AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ |
| DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ |
| DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */ |
| }; |
| }; |
| |
| &epwmss0 { |
| status = "okay"; |
| }; |
| |
| &tscadc { |
| status = "okay"; |
| |
| adc { |
| ti,adc-channels = <0 1 2 3 4 5 6 7>; |
| }; |
| }; |
| |
| &ecap0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ecap0_pins>; |
| }; |
| |
| &gpio0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio0_pins>; |
| status = "okay"; |
| |
| p23 { |
| gpio-hog; |
| gpios = <23 GPIO_ACTIVE_HIGH>; |
| /* SelEMMCorNAND selects between eMMC and NAND: |
| * Low: NAND |
| * High: eMMC |
| * When changing this line make sure the newly |
| * selected device node is enabled and the previously |
| * selected device node is disabled. |
| */ |
| output-low; |
| line-name = "SelEMMCorNAND"; |
| }; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &gpio3 { |
| status = "okay"; |
| }; |
| |
| &gpio4 { |
| status = "okay"; |
| }; |
| |
| &gpio5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&display_mux_pins>; |
| status = "okay"; |
| ti,no-reset-on-init; |
| |
| p8 { |
| /* |
| * SelLCDorHDMI selects between display and audio paths: |
| * Low: HDMI display with audio via HDMI |
| * High: LCD display with analog audio via aic3111 codec |
| */ |
| gpio-hog; |
| gpios = <8 GPIO_ACTIVE_HIGH>; |
| output-high; |
| line-name = "SelLCDorHDMI"; |
| }; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| vmmc-supply = <&evm_v3_3d>; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| /* eMMC sits on mmc2 */ |
| &mmc2 { |
| /* |
| * When enabling eMMC, disable GPMC/NAND and set |
| * SelEMMCorNAND to output-high |
| */ |
| status = "disabled"; |
| vmmc-supply = <&evm_v3_3d>; |
| bus-width = <8>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&emmc_pins_default>; |
| pinctrl-1 = <&emmc_pins_sleep>; |
| ti,non-removable; |
| }; |
| |
| &mmc3 { |
| status = "okay"; |
| /* these are on the crossbar and are outlined in the |
| xbar-event-map element */ |
| dmas = <&edma_xbar 30 0 1>, |
| <&edma_xbar 31 0 2>; |
| dma-names = "tx", "rx"; |
| vmmc-supply = <&vmmcwl_fixed>; |
| bus-width = <4>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&mmc3_pins_default>; |
| pinctrl-1 = <&mmc3_pins_sleep>; |
| cap-power-off-card; |
| keep-power-in-suspend; |
| ti,non-removable; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| wlcore: wlcore@0 { |
| compatible = "ti,wl1835"; |
| reg = <2>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| &uart3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins>; |
| }; |
| |
| &usb2_phy1 { |
| status = "okay"; |
| }; |
| |
| &usb1 { |
| dr_mode = "peripheral"; |
| status = "okay"; |
| }; |
| |
| &usb2_phy2 { |
| status = "okay"; |
| }; |
| |
| &usb2 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &mac { |
| slaves = <1>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&cpsw_default>; |
| pinctrl-1 = <&cpsw_sleep>; |
| status = "okay"; |
| }; |
| |
| &davinci_mdio { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&davinci_mdio_default>; |
| pinctrl-1 = <&davinci_mdio_sleep>; |
| status = "okay"; |
| }; |
| |
| &cpsw_emac0 { |
| phy_id = <&davinci_mdio>, <0>; |
| phy-mode = "rgmii"; |
| }; |
| |
| &elm { |
| status = "okay"; |
| }; |
| |
| &gpmc { |
| /* |
| * When enabling GPMC, disable eMMC and set |
| * SelEMMCorNAND to output-low |
| */ |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&nand_flash_x8>; |
| ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ |
| nand@0,0 { |
| compatible = "ti,omap2-nand"; |
| reg = <0 0 4>; /* device IO registers */ |
| interrupt-parent = <&gpmc>; |
| interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| <1 IRQ_TYPE_NONE>; /* termcount */ |
| rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ |
| ti,nand-ecc-opt = "bch16"; |
| ti,elm-id = <&elm>; |
| nand-bus-width = <8>; |
| gpmc,device-width = <1>; |
| gpmc,sync-clk-ps = <0>; |
| gpmc,cs-on-ns = <0>; |
| gpmc,cs-rd-off-ns = <40>; |
| gpmc,cs-wr-off-ns = <40>; |
| gpmc,adv-on-ns = <0>; |
| gpmc,adv-rd-off-ns = <25>; |
| gpmc,adv-wr-off-ns = <25>; |
| gpmc,we-on-ns = <0>; |
| gpmc,we-off-ns = <20>; |
| gpmc,oe-on-ns = <3>; |
| gpmc,oe-off-ns = <30>; |
| gpmc,access-ns = <30>; |
| gpmc,rd-cycle-ns = <40>; |
| gpmc,wr-cycle-ns = <40>; |
| gpmc,bus-turnaround-ns = <0>; |
| gpmc,cycle2cycle-delay-ns = <0>; |
| gpmc,clk-activation-ns = <0>; |
| gpmc,wr-access-ns = <40>; |
| gpmc,wr-data-mux-bus-ns = <0>; |
| /* MTD partition table */ |
| /* All SPL-* partitions are sized to minimal length |
| * which can be independently programmable. For |
| * NAND flash this is equal to size of erase-block */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "NAND.SPL"; |
| reg = <0x00000000 0x00040000>; |
| }; |
| partition@1 { |
| label = "NAND.SPL.backup1"; |
| reg = <0x00040000 0x00040000>; |
| }; |
| partition@2 { |
| label = "NAND.SPL.backup2"; |
| reg = <0x00080000 0x00040000>; |
| }; |
| partition@3 { |
| label = "NAND.SPL.backup3"; |
| reg = <0x000c0000 0x00040000>; |
| }; |
| partition@4 { |
| label = "NAND.u-boot-spl-os"; |
| reg = <0x00100000 0x00080000>; |
| }; |
| partition@5 { |
| label = "NAND.u-boot"; |
| reg = <0x00180000 0x00100000>; |
| }; |
| partition@6 { |
| label = "NAND.u-boot-env"; |
| reg = <0x00280000 0x00040000>; |
| }; |
| partition@7 { |
| label = "NAND.u-boot-env.backup1"; |
| reg = <0x002c0000 0x00040000>; |
| }; |
| partition@8 { |
| label = "NAND.kernel"; |
| reg = <0x00300000 0x00700000>; |
| }; |
| partition@9 { |
| label = "NAND.file-system"; |
| reg = <0x00a00000 0x1f600000>; |
| }; |
| }; |
| }; |
| |
| &dss { |
| status = "ok"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dss_pins>; |
| |
| port { |
| dpi_out: endpoint { |
| remote-endpoint = <&lcd_in>; |
| data-lines = <24>; |
| }; |
| }; |
| }; |
| |
| &dcan0 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&dcan0_default>; |
| pinctrl-1 = <&dcan0_sleep>; |
| status = "okay"; |
| }; |
| |
| &dcan1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&dcan1_default>; |
| pinctrl-1 = <&dcan1_sleep>; |
| status = "okay"; |
| }; |
| |
| &vpfe0 { |
| status = "okay"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&vpfe0_pins_default>; |
| pinctrl-1 = <&vpfe0_pins_sleep>; |
| |
| port { |
| vpfe0_ep: endpoint { |
| remote-endpoint = <&ov2659_1>; |
| ti,am437x-vpfe-interface = <0>; |
| bus-width = <8>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| }; |
| }; |
| }; |
| |
| &vpfe1 { |
| status = "okay"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&vpfe1_pins_default>; |
| pinctrl-1 = <&vpfe1_pins_sleep>; |
| |
| port { |
| vpfe1_ep: endpoint { |
| remote-endpoint = <&ov2659_0>; |
| ti,am437x-vpfe-interface = <0>; |
| bus-width = <8>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| }; |
| }; |
| }; |
| |
| &mcasp1 { |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&mcasp1_pins>; |
| pinctrl-1 = <&mcasp1_sleep_pins>; |
| |
| status = "okay"; |
| |
| op-mode = <0>; /* MCASP_IIS_MODE */ |
| tdm-slots = <2>; |
| /* 4 serializers */ |
| serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
| 0 0 1 2 |
| >; |
| tx-num-evt = <32>; |
| rx-num-evt = <32>; |
| }; |
| |
| &rtc { |
| clocks = <&clk_32k_rtc>, <&clk_32768_ck>; |
| clock-names = "ext-clk", "int-clk"; |
| status = "okay"; |
| }; |
| |
| &cpu { |
| cpu0-supply = <&dcdc2>; |
| }; |