can: replace the dev_dbg/info/err/... with the new netdev_xxx macros
Cc: uclinux-dist-devel@blackfin.uclinux.org
Cc: Anant Gole <anantgole@ti.com>
Cc: Chris Elston <celston@katalix.com>
Cc: Sebastian Haas <haas@ems-wuensche.com>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Sebastian Haas <dev@sebastianhaas.info>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index 9277463..09b1da5 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -470,8 +470,7 @@
return;
if (urb->status)
- dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n",
- urb->status);
+ netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status);
netdev->trans_start = jiffies;
}
@@ -651,7 +650,7 @@
if (err == -ENODEV)
netif_device_detach(netdev);
- dev_err(netdev->dev.parent, "couldn't start device: %d\n", err);
+ netdev_err(netdev, "couldn't start device: %d\n", err);
return err;
}
@@ -687,8 +686,7 @@
/* finally start device */
err = esd_usb2_start(priv);
if (err) {
- dev_warn(netdev->dev.parent,
- "couldn't start device: %d\n", err);
+ netdev_warn(netdev, "couldn't start device: %d\n", err);
close_candev(netdev);
return err;
}
@@ -721,7 +719,7 @@
/* create a URB, and a buffer for it, and copy the data to the URB */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- dev_err(netdev->dev.parent, "No memory left for URBs\n");
+ netdev_err(netdev, "No memory left for URBs\n");
stats->tx_dropped++;
dev_kfree_skb(skb);
goto nourbmem;
@@ -730,7 +728,7 @@
buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC,
&urb->transfer_dma);
if (!buf) {
- dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
+ netdev_err(netdev, "No memory left for USB buffer\n");
stats->tx_dropped++;
dev_kfree_skb(skb);
goto nobufmem;
@@ -766,7 +764,7 @@
* This may never happen.
*/
if (!context) {
- dev_warn(netdev->dev.parent, "couldn't find free context\n");
+ netdev_warn(netdev, "couldn't find free context\n");
ret = NETDEV_TX_BUSY;
goto releasebuf;
}
@@ -806,7 +804,7 @@
if (err == -ENODEV)
netif_device_detach(netdev);
else
- dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err);
+ netdev_warn(netdev, "failed tx_urb %d\n", err);
goto releasebuf;
}
@@ -845,7 +843,7 @@
for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++)
msg.msg.filter.mask[i] = 0;
if (esd_usb2_send_msg(priv->usb2, &msg) < 0)
- dev_err(netdev->dev.parent, "sending idadd message failed\n");
+ netdev_err(netdev, "sending idadd message failed\n");
/* set CAN controller to reset mode */
msg.msg.hdr.len = 2;
@@ -854,7 +852,7 @@
msg.msg.setbaud.rsvd = 0;
msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE);
if (esd_usb2_send_msg(priv->usb2, &msg) < 0)
- dev_err(netdev->dev.parent, "sending setbaud message failed\n");
+ netdev_err(netdev, "sending setbaud message failed\n");
priv->can.state = CAN_STATE_STOPPED;
@@ -910,7 +908,7 @@
msg.msg.setbaud.rsvd = 0;
msg.msg.setbaud.baud = cpu_to_le32(canbtr);
- dev_info(netdev->dev.parent, "setting BTR=%#x\n", canbtr);
+ netdev_info(netdev, "setting BTR=%#x\n", canbtr);
return esd_usb2_send_msg(priv->usb2, &msg);
}
@@ -988,15 +986,14 @@
err = register_candev(netdev);
if (err) {
- dev_err(&intf->dev,
- "couldn't register CAN device: %d\n", err);
+ dev_err(&intf->dev, "couldn't register CAN device: %d\n", err);
free_candev(netdev);
err = -ENOMEM;
goto done;
}
dev->nets[index] = priv;
- dev_info(netdev->dev.parent, "device %s registered\n", netdev->name);
+ netdev_info(netdev, "device %s registered\n", netdev->name);
done:
return err;