arch/arm/mach-mx3/mach-armadillo5x0.c - kernel/msm-4.19 - Gitiles

 /*
  * armadillo5x0.c
  *
  * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
  * updates in http://alberdroid.blogspot.com/
  *
  * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
  * Based on mx31ads.c and pcm037.c Great Work!
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */

 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>

 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>

 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>

 #include "devices.h"
 #include "crm_regs.h"

 static int armadillo5x0_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
 	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_CTS2__CTS2,
 	MX31_PIN_RTS2__RTS2,
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
 	/* LAN9118_IRQ */
 	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
 	MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_CLK__SD1_CLK,
 	MX31_PIN_SD1_CMD__SD1_CMD,
 	/* Framebuffer */
 	MX31_PIN_LD0__LD0,
 	MX31_PIN_LD1__LD1,
 	MX31_PIN_LD2__LD2,
 	MX31_PIN_LD3__LD3,
 	MX31_PIN_LD4__LD4,
 	MX31_PIN_LD5__LD5,
 	MX31_PIN_LD6__LD6,
 	MX31_PIN_LD7__LD7,
 	MX31_PIN_LD8__LD8,
 	MX31_PIN_LD9__LD9,
 	MX31_PIN_LD10__LD10,
 	MX31_PIN_LD11__LD11,
 	MX31_PIN_LD12__LD12,
 	MX31_PIN_LD13__LD13,
 	MX31_PIN_LD14__LD14,
 	MX31_PIN_LD15__LD15,
 	MX31_PIN_LD16__LD16,
 	MX31_PIN_LD17__LD17,
 	MX31_PIN_VSYNC3__VSYNC3,
 	MX31_PIN_HSYNC__HSYNC,
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
 	/* I2C2 */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
 };

 /* RTC over I2C*/
 #define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)

 static struct i2c_board_info armadillo5x0_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };

 /* GPIO BUTTONS */
 static struct gpio_keys_button armadillo5x0_buttons[] = {
 	{
 		.code		= KEY_ENTER, /*28*/
 		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
 		.active_low	= 1,
 		.desc		= "menu",
 		.wakeup		= 1,
 	}, {
 		.code		= KEY_BACK, /*158*/
 		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
 		.active_low	= 1,
 		.desc		= "back",
 		.wakeup		= 1,
 	}
 };

 static struct gpio_keys_platform_data armadillo5x0_button_data = {
 	.buttons	= armadillo5x0_buttons,
 	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
 };

 static struct platform_device armadillo5x0_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
 		.platform_data	= &armadillo5x0_button_data,
 	}
 };

 /*
  * NAND Flash
  */
 static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
 	.width		= 1,
 	.hw_ecc		= 1,
 };

 /*
  * MTD NOR Flash
  */
 static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
 	{
 		.name		= "nor.bootloader",
 		.offset		= 0x00000000,
 		.size		= 4*32*1024,
 	}, {
 		.name		= "nor.kernel",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 16*128*1024,
 	}, {
 		.name		= "nor.userland",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 110*128*1024,
 	}, {
 		.name		= "nor.config",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 1*128*1024,
 	},
 };

 static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
 	.width		= 2,
 	.parts		= armadillo5x0_nor_flash_partitions,
 	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
 };

 static struct resource armadillo5x0_nor_flash_resource = {
 	.flags		= IORESOURCE_MEM,
 	.start		= MX31_CS0_BASE_ADDR,
 	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };

 static struct platform_device armadillo5x0_nor_flash = {
 	.name			= "physmap-flash",
 	.id			= -1,
 	.num_resources		= 1,
 	.resource		= &armadillo5x0_nor_flash_resource,
 };

 /*
  * FB support
  */
 static const struct fb_videomode fb_modedb[] = {
 	{	/* 640x480 @ 60 Hz */
 		.name		= "CRT-VGA",
 		.refresh	= 60,
 		.xres		= 640,
 		.yres		= 480,
 		.pixclock	= 39721,
 		.left_margin	= 35,
 		.right_margin	= 115,
 		.upper_margin	= 43,
 		.lower_margin	= 1,
 		.hsync_len	= 10,
 		.vsync_len	= 1,
 		.sync		= FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
 	}, {/* 800x600 @ 56 Hz */
 		.name		= "CRT-SVGA",
 		.refresh	= 56,
 		.xres		= 800,
 		.yres		= 600,
 		.pixclock	= 30000,
 		.left_margin	= 30,
 		.right_margin	= 108,
 		.upper_margin	= 13,
 		.lower_margin	= 10,
 		.hsync_len	= 10,
 		.vsync_len	= 1,
 		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
 				  FB_SYNC_VERT_HIGH_ACT,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
 	},
 };

 static struct ipu_platform_data mx3_ipu_data = {
 	.irq_base = MXC_IPU_IRQ_START,
 };

 static struct mx3fb_platform_data mx3fb_pdata = {
 	.dma_dev	= &mx3_ipu.dev,
 	.name		= "CRT-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };

 /*
  * SDHC 1
  * MMC support
  */
 static int armadillo5x0_sdhc1_get_ro(struct device *dev)
 {
 	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
 }

 static int armadillo5x0_sdhc1_init(struct device *dev,
 				   irq_handler_t detect_irq, void *data)
 {
 	int ret;
 	int gpio_det, gpio_wp;

 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);

 	ret = gpio_request(gpio_det, "sdhc-card-detect");
 	if (ret)
 		return ret;

 	gpio_direction_input(gpio_det);

 	ret = gpio_request(gpio_wp, "sdhc-write-protect");
 	if (ret)
 		goto err_gpio_free;

 	gpio_direction_input(gpio_wp);

 	/* When supported the trigger type have to be BOTH */
 	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "sdhc-detect", data);

 	if (ret)
 		goto err_gpio_free_2;

 	return 0;

 err_gpio_free_2:
 	gpio_free(gpio_wp);

 err_gpio_free:
 	gpio_free(gpio_det);

 	return ret;

 }

 static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
 {
 	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
 	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
 	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
 }

 static struct imxmmc_platform_data sdhc_pdata = {
 	.get_ro = armadillo5x0_sdhc1_get_ro,
 	.init = armadillo5x0_sdhc1_init,
 	.exit = armadillo5x0_sdhc1_exit,
 };

 /*
  * SMSC 9118
  * Network support
  */
 static struct resource armadillo5x0_smc911x_resources[] = {
 	{
 		.start	= MX31_CS3_BASE_ADDR,
 		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
 		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };

 static struct smsc911x_platform_config smsc911x_info = {
 	.flags		= SMSC911X_USE_16BIT,
 	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 };

 static struct platform_device armadillo5x0_smc911x_device = {
 	.name           = "smsc911x",
 	.id             = -1,
 	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
 	.resource       = armadillo5x0_smc911x_resources,
 	.dev            = {
 		.platform_data = &smsc911x_info,
 	},
 };

 /* UART device data */
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };

 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
 	&mxc_i2c_device1,
 	&armadillo5x0_button_device,
 };

 /*
  * Perform board specific initializations
  */
 static void __init armadillo5x0_init(void)
 {
 	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");

 	platform_add_devices(devices, ARRAY_SIZE(devices));

 	/* Register UART */
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);

 	/* SMSC9118 IRQ pin */
 	gpio_direction_input(MX31_PIN_GPIO1_0);

 	/* Register SDHC */
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);

 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);

 	/* Register NOR Flash */
 	mxc_register_device(&armadillo5x0_nor_flash,
 			    &armadillo5x0_nor_flash_pdata);

 	/* Register NAND Flash */
 	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);

 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);

 	/* RTC */
 	/* Get RTC IRQ and register the chip */
 	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
 		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
 			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
 		else
 			gpio_free(ARMADILLO5X0_RTC_GPIO);
 	}
 	if (armadillo5x0_i2c_rtc.irq == 0)
 		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }

 static void __init armadillo5x0_timer_init(void)
 {
 	mx31_clocks_init(26000000);
 }

 static struct sys_timer armadillo5x0_timer = {
 	.init	= armadillo5x0_timer_init,
 };

 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
 	.phys_io	= MX31_AIPS1_BASE_ADDR,
 	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
 	.init_machine	= armadillo5x0_init,
 MACHINE_END
	/*
	* armadillo5x0.c
	*
	* Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
	* updates in http://alberdroid.blogspot.com/
	*
	* Based on Atmark Techno, Inc. armadillo 500 BSP 2008
	* Based on mx31ads.c and pcm037.c Great Work!
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	* MA 02110-1301, USA.
	*/

	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/clk.h>
	#include <linux/platform_device.h>
	#include <linux/gpio.h>
	#include <linux/smsc911x.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>
	#include <linux/mtd/physmap.h>
	#include <linux/io.h>
	#include <linux/input.h>
	#include <linux/gpio_keys.h>
	#include <linux/i2c.h>

	#include <mach/hardware.h>
	#include <asm/mach-types.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/time.h>
	#include <asm/memory.h>
	#include <asm/mach/map.h>

	#include <mach/common.h>
	#include <mach/imx-uart.h>
	#include <mach/iomux-mx3.h>
	#include <mach/board-armadillo5x0.h>
	#include <mach/mmc.h>
	#include <mach/ipu.h>
	#include <mach/mx3fb.h>
	#include <mach/mxc_nand.h>

	#include "devices.h"
	#include "crm_regs.h"

	static int armadillo5x0_pins[] = {
	/* UART1 */
	MX31_PIN_CTS1__CTS1,
	MX31_PIN_RTS1__RTS1,
	MX31_PIN_TXD1__TXD1,
	MX31_PIN_RXD1__RXD1,
	/* UART2 */
	MX31_PIN_CTS2__CTS2,
	MX31_PIN_RTS2__RTS2,
	MX31_PIN_TXD2__TXD2,
	MX31_PIN_RXD2__RXD2,
	/* LAN9118_IRQ */
	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
	/* SDHC1 */
	MX31_PIN_SD1_DATA3__SD1_DATA3,
	MX31_PIN_SD1_DATA2__SD1_DATA2,
	MX31_PIN_SD1_DATA1__SD1_DATA1,
	MX31_PIN_SD1_DATA0__SD1_DATA0,
	MX31_PIN_SD1_CLK__SD1_CLK,
	MX31_PIN_SD1_CMD__SD1_CMD,
	/* Framebuffer */
	MX31_PIN_LD0__LD0,
	MX31_PIN_LD1__LD1,
	MX31_PIN_LD2__LD2,
	MX31_PIN_LD3__LD3,
	MX31_PIN_LD4__LD4,
	MX31_PIN_LD5__LD5,
	MX31_PIN_LD6__LD6,
	MX31_PIN_LD7__LD7,
	MX31_PIN_LD8__LD8,
	MX31_PIN_LD9__LD9,
	MX31_PIN_LD10__LD10,
	MX31_PIN_LD11__LD11,
	MX31_PIN_LD12__LD12,
	MX31_PIN_LD13__LD13,
	MX31_PIN_LD14__LD14,
	MX31_PIN_LD15__LD15,
	MX31_PIN_LD16__LD16,
	MX31_PIN_LD17__LD17,
	MX31_PIN_VSYNC3__VSYNC3,
	MX31_PIN_HSYNC__HSYNC,
	MX31_PIN_FPSHIFT__FPSHIFT,
	MX31_PIN_DRDY0__DRDY0,
	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /ADV7125_PSAVE/
	/* I2C2 */
	MX31_PIN_CSPI2_MOSI__SCL,
	MX31_PIN_CSPI2_MISO__SDA,
	};

	/* RTC over I2C*/
	#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)

	static struct i2c_board_info armadillo5x0_i2c_rtc = {
	I2C_BOARD_INFO("s35390a", 0x30),
	};

	/* GPIO BUTTONS */
	static struct gpio_keys_button armadillo5x0_buttons[] = {
	{
	.code = KEY_ENTER, /28/
	.gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
	.active_low = 1,
	.desc = "menu",
	.wakeup = 1,
	}, {
	.code = KEY_BACK, /158/
	.gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
	.active_low = 1,
	.desc = "back",
	.wakeup = 1,
	}
	};

	static struct gpio_keys_platform_data armadillo5x0_button_data = {
	.buttons = armadillo5x0_buttons,
	.nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
	};

	static struct platform_device armadillo5x0_button_device = {
	.name = "gpio-keys",
	.id = -1,
	.num_resources = 0,
	.dev = {
	.platform_data = &armadillo5x0_button_data,
	}
	};

	/*
	* NAND Flash
	*/
	static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
	.width = 1,
	.hw_ecc = 1,
	};

	/*
	* MTD NOR Flash
	*/
	static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
	{
	.name = "nor.bootloader",
	.offset = 0x00000000,
	.size = 4321024,
	}, {
	.name = "nor.kernel",
	.offset = MTDPART_OFS_APPEND,
	.size = 161281024,
	}, {
	.name = "nor.userland",
	.offset = MTDPART_OFS_APPEND,
	.size = 1101281024,
	}, {
	.name = "nor.config",
	.offset = MTDPART_OFS_APPEND,
	.size = 11281024,
	},
	};

	static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
	.width = 2,
	.parts = armadillo5x0_nor_flash_partitions,
	.nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
	};

	static struct resource armadillo5x0_nor_flash_resource = {
	.flags = IORESOURCE_MEM,
	.start = MX31_CS0_BASE_ADDR,
	.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
	};

	static struct platform_device armadillo5x0_nor_flash = {
	.name = "physmap-flash",
	.id = -1,
	.num_resources = 1,
	.resource = &armadillo5x0_nor_flash_resource,
	};

	/*
	* FB support
	*/
	static const struct fb_videomode fb_modedb[] = {
	{ /* 640x480 @ 60 Hz */
	.name = "CRT-VGA",
	.refresh = 60,
	.xres = 640,
	.yres = 480,
	.pixclock = 39721,
	.left_margin = 35,
	.right_margin = 115,
	.upper_margin = 43,
	.lower_margin = 1,
	.hsync_len = 10,
	.vsync_len = 1,
	.sync = FB_SYNC_OE_ACT_HIGH,
	.vmode = FB_VMODE_NONINTERLACED,
	.flag = 0,
	}, {/* 800x600 @ 56 Hz */
	.name = "CRT-SVGA",
	.refresh = 56,
	.xres = 800,
	.yres = 600,
	.pixclock = 30000,
	.left_margin = 30,
	.right_margin = 108,
	.upper_margin = 13,
	.lower_margin = 10,
	.hsync_len = 10,
	.vsync_len = 1,
	.sync = FB_SYNC_OE_ACT_HIGH \| FB_SYNC_HOR_HIGH_ACT \|
	FB_SYNC_VERT_HIGH_ACT,
	.vmode = FB_VMODE_NONINTERLACED,
	.flag = 0,
	},
	};

	static struct ipu_platform_data mx3_ipu_data = {
	.irq_base = MXC_IPU_IRQ_START,
	};

	static struct mx3fb_platform_data mx3fb_pdata = {
	.dma_dev = &mx3_ipu.dev,
	.name = "CRT-VGA",
	.mode = fb_modedb,
	.num_modes = ARRAY_SIZE(fb_modedb),
	};

	/*
	* SDHC 1
	* MMC support
	*/
	static int armadillo5x0_sdhc1_get_ro(struct device *dev)
	{
	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
	}

	static int armadillo5x0_sdhc1_init(struct device *dev,
	irq_handler_t detect_irq, void *data)
	{
	int ret;
	int gpio_det, gpio_wp;

	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);

	ret = gpio_request(gpio_det, "sdhc-card-detect");
	if (ret)
	return ret;

	gpio_direction_input(gpio_det);

	ret = gpio_request(gpio_wp, "sdhc-write-protect");
	if (ret)
	goto err_gpio_free;

	gpio_direction_input(gpio_wp);

	/* When supported the trigger type have to be BOTH */
	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
	IRQF_DISABLED \| IRQF_TRIGGER_FALLING,
	"sdhc-detect", data);

	if (ret)
	goto err_gpio_free_2;

	return 0;

	err_gpio_free_2:
	gpio_free(gpio_wp);

	err_gpio_free:
	gpio_free(gpio_det);

	return ret;

	}

	static void armadillo5x0_sdhc1_exit(struct device dev, void data)
	{
	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
	}

	static struct imxmmc_platform_data sdhc_pdata = {
	.get_ro = armadillo5x0_sdhc1_get_ro,
	.init = armadillo5x0_sdhc1_init,
	.exit = armadillo5x0_sdhc1_exit,
	};

	/*
	* SMSC 9118
	* Network support
	*/
	static struct resource armadillo5x0_smc911x_resources[] = {
	{
	.start = MX31_CS3_BASE_ADDR,
	.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
	.end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_LOWLEVEL,
	},
	};

	static struct smsc911x_platform_config smsc911x_info = {
	.flags = SMSC911X_USE_16BIT,
	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
	};

	static struct platform_device armadillo5x0_smc911x_device = {
	.name = "smsc911x",
	.id = -1,
	.num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
	.resource = armadillo5x0_smc911x_resources,
	.dev = {
	.platform_data = &smsc911x_info,
	},
	};

	/* UART device data */
	static struct imxuart_platform_data uart_pdata = {
	.flags = IMXUART_HAVE_RTSCTS,
	};

	static struct platform_device *devices[] __initdata = {
	&armadillo5x0_smc911x_device,
	&mxc_i2c_device1,
	&armadillo5x0_button_device,
	};

	/*
	* Perform board specific initializations
	*/
	static void __init armadillo5x0_init(void)
	{
	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
	ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");

	platform_add_devices(devices, ARRAY_SIZE(devices));

	/* Register UART */
	mxc_register_device(&mxc_uart_device0, &uart_pdata);
	mxc_register_device(&mxc_uart_device1, &uart_pdata);

	/* SMSC9118 IRQ pin */
	gpio_direction_input(MX31_PIN_GPIO1_0);

	/* Register SDHC */
	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);

	/* Register FB */
	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
	mxc_register_device(&mx3_fb, &mx3fb_pdata);

	/* Register NOR Flash */
	mxc_register_device(&armadillo5x0_nor_flash,
	&armadillo5x0_nor_flash_pdata);

	/* Register NAND Flash */
	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);

	/* set NAND page size to 2k if not configured via boot mode pins */
	__raw_writel(__raw_readl(MXC_CCM_RCSR) \| (1 << 30), MXC_CCM_RCSR);

	/* RTC */
	/* Get RTC IRQ and register the chip */
	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
	if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
	armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
	else
	gpio_free(ARMADILLO5X0_RTC_GPIO);
	}
	if (armadillo5x0_i2c_rtc.irq == 0)
	pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
	}

	static void __init armadillo5x0_timer_init(void)
	{
	mx31_clocks_init(26000000);
	}

	static struct sys_timer armadillo5x0_timer = {
	.init = armadillo5x0_timer_init,
	};

	MACHINE_START(ARMADILLO5X0, "Armadillo-500")
	/* Maintainer: Alberto Panizzo */
	.phys_io = MX31_AIPS1_BASE_ADDR,
	.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
	.boot_params = PHYS_OFFSET + 0x00000100,
	.map_io = mx31_map_io,
	.init_irq = mx31_init_irq,
	.timer = &armadillo5x0_timer,
	.init_machine = armadillo5x0_init,
	MACHINE_END