drivers/usb/host/bcma-hcd.c - kernel/msm-4.19 - Gitiles

 /*
  * Broadcom specific Advanced Microcontroller Bus
  * Broadcom USB-core driver (BCMA bus glue)
  *
  * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
  * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
  *
  * Based on ssb-ohci driver
  * Copyright 2007 Michael Buesch <m@bues.ch>
  *
  * Derived from the OHCI-PCI driver
  * Copyright 1999 Roman Weissgaerber
  * Copyright 2000-2002 David Brownell
  * Copyright 1999 Linus Torvalds
  * Copyright 1999 Gregory P. Smith
  *
  * Derived from the USBcore related parts of Broadcom-SB
  * Copyright 2005-2011 Broadcom Corporation
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 #include <linux/bcma/bcma.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>

 MODULE_AUTHOR("Hauke Mehrtens");
 MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
 MODULE_LICENSE("GPL");

 struct bcma_hcd_device {
 	struct bcma_device *core;
 	struct platform_device *ehci_dev;
 	struct platform_device *ohci_dev;
 	struct gpio_desc *gpio_desc;
 };

 /* Wait for bitmask in a register to get set or cleared.
  * timeout is in units of ten-microseconds.
  */
 static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
 			  int timeout)
 {
 	int i;
 	u32 val;

 	for (i = 0; i < timeout; i++) {
 		val = bcma_read32(dev, reg);
 		if ((val & bitmask) == bitmask)
 			return 0;
 		udelay(10);
 	}

 	return -ETIMEDOUT;
 }

 static void bcma_hcd_4716wa(struct bcma_device *dev)
 {
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 	/* Work around for 4716 failures. */
 	if (dev->bus->chipinfo.id == 0x4716) {
 		u32 tmp;

 		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
 		if (tmp >= 480000000)
 			tmp = 0x1846b; /* set CDR to 0x11(fast) */
 		else if (tmp == 453000000)
 			tmp = 0x1046b; /* set CDR to 0x10(slow) */
 		else
 			tmp = 0;

 		/* Change Shim mdio control reg to fix host not acking at
 		 * high frequencies
 		 */
 		if (tmp) {
 			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
 			udelay(500);

 			bcma_write32(dev, 0x524, tmp);
 			udelay(500);
 			bcma_write32(dev, 0x524, 0x4ab);
 			udelay(500);
 			bcma_read32(dev, 0x528);
 			bcma_write32(dev, 0x528, 0x80000000);
 		}
 	}
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
 }

 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
 static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
 {
 	u32 tmp;

 	/*
 	 * USB 2.0 special considerations:
 	 *
 	 * 1. Since the core supports both OHCI and EHCI functions, it must
 	 *    only be reset once.
 	 *
 	 * 2. In addition to the standard SI reset sequence, the Host Control
 	 *    Register must be programmed to bring the USB core and various
 	 *    phy components out of reset.
 	 */
 	if (!bcma_core_is_enabled(dev)) {
 		bcma_core_enable(dev, 0);
 		mdelay(10);
 		if (dev->id.rev >= 5) {
 			/* Enable Misc PLL */
 			tmp = bcma_read32(dev, 0x1e0);
 			tmp |= 0x100;
 			bcma_write32(dev, 0x1e0, tmp);
 			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
 				printk(KERN_EMERG "Failed to enable misc PPL!\n");

 			/* Take out of resets */
 			bcma_write32(dev, 0x200, 0x4ff);
 			udelay(25);
 			bcma_write32(dev, 0x200, 0x6ff);
 			udelay(25);

 			/* Make sure digital and AFE are locked in USB PHY */
 			bcma_write32(dev, 0x524, 0x6b);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);
 			udelay(50);
 			bcma_write32(dev, 0x524, 0xab);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);
 			udelay(50);
 			bcma_write32(dev, 0x524, 0x2b);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);
 			udelay(50);
 			bcma_write32(dev, 0x524, 0x10ab);
 			udelay(50);
 			tmp = bcma_read32(dev, 0x524);

 			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
 				tmp = bcma_read32(dev, 0x528);
 				printk(KERN_EMERG
 				       "USB20H mdio_rddata 0x%08x\n", tmp);
 			}
 			bcma_write32(dev, 0x528, 0x80000000);
 			tmp = bcma_read32(dev, 0x314);
 			udelay(265);
 			bcma_write32(dev, 0x200, 0x7ff);
 			udelay(10);

 			/* Take USB and HSIC out of non-driving modes */
 			bcma_write32(dev, 0x510, 0);
 		} else {
 			bcma_write32(dev, 0x200, 0x7ff);

 			udelay(1);
 		}

 		bcma_hcd_4716wa(dev);
 	}
 }

 static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
 {
 	struct bcma_device *arm_core;
 	void __iomem *dmu;

 	arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
 	if (!arm_core) {
 		dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
 		return;
 	}

 	dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
 	if (!dmu) {
 		dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
 		return;
 	}

 	/* Unlock DMU PLL settings */
 	iowrite32(0x0000ea68, dmu + 0x180);

 	/* Write USB 2.0 PLL control setting */
 	iowrite32(0x00dd10c3, dmu + 0x164);

 	/* Lock DMU PLL settings */
 	iowrite32(0x00000000, dmu + 0x180);

 	iounmap(dmu);
 }

 static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
 {
 	u32 val;

 	/*
 	 * Delay after PHY initialized to ensure HC is ready to be configured
 	 */
 	usleep_range(1000, 2000);

 	/* Set packet buffer OUT threshold */
 	val = bcma_read32(dev, 0x94);
 	val &= 0xffff;
 	val |= 0x80 << 16;
 	bcma_write32(dev, 0x94, val);

 	/* Enable break memory transfer */
 	val = bcma_read32(dev, 0x9c);
 	val |= 1;
 	bcma_write32(dev, 0x9c, val);
 }

 static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
 {
 	bcma_core_enable(dev, 0);

 	if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
 	    dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
 		if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
 		    dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
 			bcma_hcd_init_chip_arm_phy(dev);

 		bcma_hcd_init_chip_arm_hc(dev);
 	}
 }

 static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
 {
 	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);

 	if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
 		return;

 	gpiod_set_value(usb_dev->gpio_desc, val);
 }

 static const struct usb_ehci_pdata ehci_pdata = {
 };

 static const struct usb_ohci_pdata ohci_pdata = {
 };

 static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
 						    const char *name, u32 addr,
 						    const void *data,
 						    size_t size)
 {
 	struct platform_device *hci_dev;
 	struct resource hci_res[2];
 	int ret;

 	memset(hci_res, 0, sizeof(hci_res));

 	hci_res[0].start = addr;
 	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
 	hci_res[0].flags = IORESOURCE_MEM;

 	hci_res[1].start = dev->irq;
 	hci_res[1].flags = IORESOURCE_IRQ;

 	hci_dev = platform_device_alloc(name, 0);
 	if (!hci_dev)
 		return ERR_PTR(-ENOMEM);

 	hci_dev->dev.parent = &dev->dev;
 	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

 	ret = platform_device_add_resources(hci_dev, hci_res,
 					    ARRAY_SIZE(hci_res));
 	if (ret)
 		goto err_alloc;
 	if (data)
 		ret = platform_device_add_data(hci_dev, data, size);
 	if (ret)
 		goto err_alloc;
 	ret = platform_device_add(hci_dev);
 	if (ret)
 		goto err_alloc;

 	return hci_dev;

 err_alloc:
 	platform_device_put(hci_dev);
 	return ERR_PTR(ret);
 }

 static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
 {
 	struct bcma_device *dev = usb_dev->core;
 	struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
 	u32 ohci_addr;
 	int err;

 	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
 		return -EOPNOTSUPP;

 	switch (dev->id.id) {
 	case BCMA_CORE_NS_USB20:
 		bcma_hcd_init_chip_arm(dev);
 		break;
 	case BCMA_CORE_USB20_HOST:
 		bcma_hcd_init_chip_mips(dev);
 		break;
 	default:
 		return -ENODEV;
 	}

 	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
 	ohci_addr = dev->addr_s[0];
 	if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
 	     chipinfo->id == BCMA_CHIP_ID_BCM4749)
 	    && chipinfo->rev == 0)
 		ohci_addr = 0x18009000;

 	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
 						 ohci_addr, &ohci_pdata,
 						 sizeof(ohci_pdata));
 	if (IS_ERR(usb_dev->ohci_dev))
 		return PTR_ERR(usb_dev->ohci_dev);

 	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
 						 dev->addr, &ehci_pdata,
 						 sizeof(ehci_pdata));
 	if (IS_ERR(usb_dev->ehci_dev)) {
 		err = PTR_ERR(usb_dev->ehci_dev);
 		goto err_unregister_ohci_dev;
 	}

 	return 0;

 err_unregister_ohci_dev:
 	platform_device_unregister(usb_dev->ohci_dev);
 	return err;
 }

 static int bcma_hcd_probe(struct bcma_device *core)
 {
 	int err;
 	struct bcma_hcd_device *usb_dev;

 	/* TODO: Probably need checks here; is the core connected? */

 	usb_dev = devm_kzalloc(&core->dev, sizeof(struct bcma_hcd_device),
 			       GFP_KERNEL);
 	if (!usb_dev)
 		return -ENOMEM;
 	usb_dev->core = core;

 	if (core->dev.of_node)
 		usb_dev->gpio_desc = devm_get_gpiod_from_child(&core->dev, "vcc",
 							       &core->dev.of_node->fwnode);
 	if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
 		gpiod_direction_output(usb_dev->gpio_desc, 1);

 	switch (core->id.id) {
 	case BCMA_CORE_USB20_HOST:
 	case BCMA_CORE_NS_USB20:
 		err = bcma_hcd_usb20_init(usb_dev);
 		if (err)
 			return err;
 		break;
 	default:
 		return -ENODEV;
 	}

 	bcma_set_drvdata(core, usb_dev);
 	return 0;
 }

 static void bcma_hcd_remove(struct bcma_device *dev)
 {
 	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
 	struct platform_device *ohci_dev = usb_dev->ohci_dev;
 	struct platform_device *ehci_dev = usb_dev->ehci_dev;

 	if (ohci_dev)
 		platform_device_unregister(ohci_dev);
 	if (ehci_dev)
 		platform_device_unregister(ehci_dev);

 	bcma_core_disable(dev, 0);
 }

 static void bcma_hcd_shutdown(struct bcma_device *dev)
 {
 	bcma_hci_platform_power_gpio(dev, false);
 	bcma_core_disable(dev, 0);
 }

 #ifdef CONFIG_PM

 static int bcma_hcd_suspend(struct bcma_device *dev)
 {
 	bcma_hci_platform_power_gpio(dev, false);
 	bcma_core_disable(dev, 0);

 	return 0;
 }

 static int bcma_hcd_resume(struct bcma_device *dev)
 {
 	bcma_hci_platform_power_gpio(dev, true);
 	bcma_core_enable(dev, 0);

 	return 0;
 }

 #else /* !CONFIG_PM */
 #define bcma_hcd_suspend	NULL
 #define bcma_hcd_resume	NULL
 #endif /* CONFIG_PM */

 static const struct bcma_device_id bcma_hcd_table[] = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
 	{},
 };
 MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);

 static struct bcma_driver bcma_hcd_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= bcma_hcd_table,
 	.probe		= bcma_hcd_probe,
 	.remove		= bcma_hcd_remove,
 	.shutdown	= bcma_hcd_shutdown,
 	.suspend	= bcma_hcd_suspend,
 	.resume		= bcma_hcd_resume,
 };

 static int __init bcma_hcd_init(void)
 {
 	return bcma_driver_register(&bcma_hcd_driver);
 }
 module_init(bcma_hcd_init);

 static void __exit bcma_hcd_exit(void)
 {
 	bcma_driver_unregister(&bcma_hcd_driver);
 }
 module_exit(bcma_hcd_exit);
	/*
	* Broadcom specific Advanced Microcontroller Bus
	* Broadcom USB-core driver (BCMA bus glue)
	*
	* Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
	* Copyright 2015 Felix Fietkau <nbd@openwrt.org>
	*
	* Based on ssb-ohci driver
	* Copyright 2007 Michael Buesch <m@bues.ch>
	*
	* Derived from the OHCI-PCI driver
	* Copyright 1999 Roman Weissgaerber
	* Copyright 2000-2002 David Brownell
	* Copyright 1999 Linus Torvalds
	* Copyright 1999 Gregory P. Smith
	*
	* Derived from the USBcore related parts of Broadcom-SB
	* Copyright 2005-2011 Broadcom Corporation
	*
	* Licensed under the GNU/GPL. See COPYING for details.
	*/
	#include <linux/bcma/bcma.h>
	#include <linux/delay.h>
	#include <linux/gpio/consumer.h>
	#include <linux/platform_device.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/of.h>
	#include <linux/of_gpio.h>
	#include <linux/usb/ehci_pdriver.h>
	#include <linux/usb/ohci_pdriver.h>

	MODULE_AUTHOR("Hauke Mehrtens");
	MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
	MODULE_LICENSE("GPL");

	struct bcma_hcd_device {
	struct bcma_device *core;
	struct platform_device *ehci_dev;
	struct platform_device *ohci_dev;
	struct gpio_desc *gpio_desc;
	};

	/* Wait for bitmask in a register to get set or cleared.
	* timeout is in units of ten-microseconds.
	*/
	static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
	int timeout)
	{
	int i;
	u32 val;

	for (i = 0; i < timeout; i++) {
	val = bcma_read32(dev, reg);
	if ((val & bitmask) == bitmask)
	return 0;
	udelay(10);
	}

	return -ETIMEDOUT;
	}

	static void bcma_hcd_4716wa(struct bcma_device *dev)
	{
	#ifdef CONFIG_BCMA_DRIVER_MIPS
	/* Work around for 4716 failures. */
	if (dev->bus->chipinfo.id == 0x4716) {
	u32 tmp;

	tmp = bcma_cpu_clock(&dev->bus->drv_mips);
	if (tmp >= 480000000)
	tmp = 0x1846b; /* set CDR to 0x11(fast) */
	else if (tmp == 453000000)
	tmp = 0x1046b; /* set CDR to 0x10(slow) */
	else
	tmp = 0;

	/* Change Shim mdio control reg to fix host not acking at
	* high frequencies
	*/
	if (tmp) {
	bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
	udelay(500);

	bcma_write32(dev, 0x524, tmp);
	udelay(500);
	bcma_write32(dev, 0x524, 0x4ab);
	udelay(500);
	bcma_read32(dev, 0x528);
	bcma_write32(dev, 0x528, 0x80000000);
	}
	}
	#endif /* CONFIG_BCMA_DRIVER_MIPS */
	}

	/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
	static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
	{
	u32 tmp;

	/*
	* USB 2.0 special considerations:
	*
	* 1. Since the core supports both OHCI and EHCI functions, it must
	* only be reset once.
	*
	* 2. In addition to the standard SI reset sequence, the Host Control
	* Register must be programmed to bring the USB core and various
	* phy components out of reset.
	*/
	if (!bcma_core_is_enabled(dev)) {
	bcma_core_enable(dev, 0);
	mdelay(10);
	if (dev->id.rev >= 5) {
	/* Enable Misc PLL */
	tmp = bcma_read32(dev, 0x1e0);
	tmp \|= 0x100;
	bcma_write32(dev, 0x1e0, tmp);
	if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
	printk(KERN_EMERG "Failed to enable misc PPL!\n");

	/* Take out of resets */
	bcma_write32(dev, 0x200, 0x4ff);
	udelay(25);
	bcma_write32(dev, 0x200, 0x6ff);
	udelay(25);

	/* Make sure digital and AFE are locked in USB PHY */
	bcma_write32(dev, 0x524, 0x6b);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);
	udelay(50);
	bcma_write32(dev, 0x524, 0xab);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);
	udelay(50);
	bcma_write32(dev, 0x524, 0x2b);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);
	udelay(50);
	bcma_write32(dev, 0x524, 0x10ab);
	udelay(50);
	tmp = bcma_read32(dev, 0x524);

	if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
	tmp = bcma_read32(dev, 0x528);
	printk(KERN_EMERG
	"USB20H mdio_rddata 0x%08x\n", tmp);
	}
	bcma_write32(dev, 0x528, 0x80000000);
	tmp = bcma_read32(dev, 0x314);
	udelay(265);
	bcma_write32(dev, 0x200, 0x7ff);
	udelay(10);

	/* Take USB and HSIC out of non-driving modes */
	bcma_write32(dev, 0x510, 0);
	} else {
	bcma_write32(dev, 0x200, 0x7ff);

	udelay(1);
	}

	bcma_hcd_4716wa(dev);
	}
	}

	static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
	{
	struct bcma_device *arm_core;
	void __iomem *dmu;

	arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
	if (!arm_core) {
	dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
	return;
	}

	dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
	if (!dmu) {
	dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
	return;
	}

	/* Unlock DMU PLL settings */
	iowrite32(0x0000ea68, dmu + 0x180);

	/* Write USB 2.0 PLL control setting */
	iowrite32(0x00dd10c3, dmu + 0x164);

	/* Lock DMU PLL settings */
	iowrite32(0x00000000, dmu + 0x180);

	iounmap(dmu);
	}

	static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
	{
	u32 val;

	/*
	* Delay after PHY initialized to ensure HC is ready to be configured
	*/
	usleep_range(1000, 2000);

	/* Set packet buffer OUT threshold */
	val = bcma_read32(dev, 0x94);
	val &= 0xffff;
	val \|= 0x80 << 16;
	bcma_write32(dev, 0x94, val);

	/* Enable break memory transfer */
	val = bcma_read32(dev, 0x9c);
	val \|= 1;
	bcma_write32(dev, 0x9c, val);
	}

	static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
	{
	bcma_core_enable(dev, 0);

	if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 \|\|
	dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
	if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 \|\|
	dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
	bcma_hcd_init_chip_arm_phy(dev);

	bcma_hcd_init_chip_arm_hc(dev);
	}
	}

	static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
	{
	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);

	if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
	return;

	gpiod_set_value(usb_dev->gpio_desc, val);
	}

	static const struct usb_ehci_pdata ehci_pdata = {
	};

	static const struct usb_ohci_pdata ohci_pdata = {
	};

	static struct platform_device bcma_hcd_create_pdev(struct bcma_device dev,
	const char *name, u32 addr,
	const void *data,
	size_t size)
	{
	struct platform_device *hci_dev;
	struct resource hci_res[2];
	int ret;

	memset(hci_res, 0, sizeof(hci_res));

	hci_res[0].start = addr;
	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
	hci_res[0].flags = IORESOURCE_MEM;

	hci_res[1].start = dev->irq;
	hci_res[1].flags = IORESOURCE_IRQ;

	hci_dev = platform_device_alloc(name, 0);
	if (!hci_dev)
	return ERR_PTR(-ENOMEM);

	hci_dev->dev.parent = &dev->dev;
	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

	ret = platform_device_add_resources(hci_dev, hci_res,
	ARRAY_SIZE(hci_res));
	if (ret)
	goto err_alloc;
	if (data)
	ret = platform_device_add_data(hci_dev, data, size);
	if (ret)
	goto err_alloc;
	ret = platform_device_add(hci_dev);
	if (ret)
	goto err_alloc;

	return hci_dev;

	err_alloc:
	platform_device_put(hci_dev);
	return ERR_PTR(ret);
	}

	static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
	{
	struct bcma_device *dev = usb_dev->core;
	struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
	u32 ohci_addr;
	int err;

	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
	return -EOPNOTSUPP;

	switch (dev->id.id) {
	case BCMA_CORE_NS_USB20:
	bcma_hcd_init_chip_arm(dev);
	break;
	case BCMA_CORE_USB20_HOST:
	bcma_hcd_init_chip_mips(dev);
	break;
	default:
	return -ENODEV;
	}

	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
	ohci_addr = dev->addr_s[0];
	if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 \|\|
	chipinfo->id == BCMA_CHIP_ID_BCM4749)
	&& chipinfo->rev == 0)
	ohci_addr = 0x18009000;

	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
	ohci_addr, &ohci_pdata,
	sizeof(ohci_pdata));
	if (IS_ERR(usb_dev->ohci_dev))
	return PTR_ERR(usb_dev->ohci_dev);

	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
	dev->addr, &ehci_pdata,
	sizeof(ehci_pdata));
	if (IS_ERR(usb_dev->ehci_dev)) {
	err = PTR_ERR(usb_dev->ehci_dev);
	goto err_unregister_ohci_dev;
	}

	return 0;

	err_unregister_ohci_dev:
	platform_device_unregister(usb_dev->ohci_dev);
	return err;
	}

	static int bcma_hcd_probe(struct bcma_device *core)
	{
	int err;
	struct bcma_hcd_device *usb_dev;

	/* TODO: Probably need checks here; is the core connected? */

	usb_dev = devm_kzalloc(&core->dev, sizeof(struct bcma_hcd_device),
	GFP_KERNEL);
	if (!usb_dev)
	return -ENOMEM;
	usb_dev->core = core;

	if (core->dev.of_node)
	usb_dev->gpio_desc = devm_get_gpiod_from_child(&core->dev, "vcc",
	&core->dev.of_node->fwnode);
	if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
	gpiod_direction_output(usb_dev->gpio_desc, 1);

	switch (core->id.id) {
	case BCMA_CORE_USB20_HOST:
	case BCMA_CORE_NS_USB20:
	err = bcma_hcd_usb20_init(usb_dev);
	if (err)
	return err;
	break;
	default:
	return -ENODEV;
	}

	bcma_set_drvdata(core, usb_dev);
	return 0;
	}

	static void bcma_hcd_remove(struct bcma_device *dev)
	{
	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
	struct platform_device *ohci_dev = usb_dev->ohci_dev;
	struct platform_device *ehci_dev = usb_dev->ehci_dev;

	if (ohci_dev)
	platform_device_unregister(ohci_dev);
	if (ehci_dev)
	platform_device_unregister(ehci_dev);

	bcma_core_disable(dev, 0);
	}

	static void bcma_hcd_shutdown(struct bcma_device *dev)
	{
	bcma_hci_platform_power_gpio(dev, false);
	bcma_core_disable(dev, 0);
	}

	#ifdef CONFIG_PM

	static int bcma_hcd_suspend(struct bcma_device *dev)
	{
	bcma_hci_platform_power_gpio(dev, false);
	bcma_core_disable(dev, 0);

	return 0;
	}

	static int bcma_hcd_resume(struct bcma_device *dev)
	{
	bcma_hci_platform_power_gpio(dev, true);
	bcma_core_enable(dev, 0);

	return 0;
	}

	#else /* !CONFIG_PM */
	#define bcma_hcd_suspend NULL
	#define bcma_hcd_resume NULL
	#endif /* CONFIG_PM */

	static const struct bcma_device_id bcma_hcd_table[] = {
	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
	{},
	};
	MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);

	static struct bcma_driver bcma_hcd_driver = {
	.name = KBUILD_MODNAME,
	.id_table = bcma_hcd_table,
	.probe = bcma_hcd_probe,
	.remove = bcma_hcd_remove,
	.shutdown = bcma_hcd_shutdown,
	.suspend = bcma_hcd_suspend,
	.resume = bcma_hcd_resume,
	};

	static int __init bcma_hcd_init(void)
	{
	return bcma_driver_register(&bcma_hcd_driver);
	}
	module_init(bcma_hcd_init);

	static void __exit bcma_hcd_exit(void)
	{
	bcma_driver_unregister(&bcma_hcd_driver);
	}
	module_exit(bcma_hcd_exit);