| /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <linux/sysrq.h> |
| #include "drmP.h" |
| #include "drm.h" |
| #include "i915_drm.h" |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| |
| #define MAX_NOPID ((u32)~0) |
| |
| /** |
| * Interrupts that are always left unmasked. |
| * |
| * Since pipe events are edge-triggered from the PIPESTAT register to IIR, |
| * we leave them always unmasked in IMR and then control enabling them through |
| * PIPESTAT alone. |
| */ |
| #define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \ |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| |
| /** Interrupts that we mask and unmask at runtime. */ |
| #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) |
| |
| #define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\ |
| PIPE_VBLANK_INTERRUPT_STATUS) |
| |
| #define I915_PIPE_VBLANK_ENABLE (PIPE_START_VBLANK_INTERRUPT_ENABLE |\ |
| PIPE_VBLANK_INTERRUPT_ENABLE) |
| |
| #define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \ |
| DRM_I915_VBLANK_PIPE_B) |
| |
| void |
| igdng_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->gt_irq_mask_reg & mask) != 0) { |
| dev_priv->gt_irq_mask_reg &= ~mask; |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg); |
| (void) I915_READ(GTIMR); |
| } |
| } |
| |
| static inline void |
| igdng_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->gt_irq_mask_reg & mask) != mask) { |
| dev_priv->gt_irq_mask_reg |= mask; |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg); |
| (void) I915_READ(GTIMR); |
| } |
| } |
| |
| /* For display hotplug interrupt */ |
| void |
| igdng_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask_reg & mask) != 0) { |
| dev_priv->irq_mask_reg &= ~mask; |
| I915_WRITE(DEIMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(DEIMR); |
| } |
| } |
| |
| static inline void |
| igdng_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask_reg & mask) != mask) { |
| dev_priv->irq_mask_reg |= mask; |
| I915_WRITE(DEIMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(DEIMR); |
| } |
| } |
| |
| void |
| i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask_reg & mask) != 0) { |
| dev_priv->irq_mask_reg &= ~mask; |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IMR); |
| } |
| } |
| |
| static inline void |
| i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask_reg & mask) != mask) { |
| dev_priv->irq_mask_reg |= mask; |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IMR); |
| } |
| } |
| |
| static inline u32 |
| i915_pipestat(int pipe) |
| { |
| if (pipe == 0) |
| return PIPEASTAT; |
| if (pipe == 1) |
| return PIPEBSTAT; |
| BUG(); |
| } |
| |
| void |
| i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) |
| { |
| if ((dev_priv->pipestat[pipe] & mask) != mask) { |
| u32 reg = i915_pipestat(pipe); |
| |
| dev_priv->pipestat[pipe] |= mask; |
| /* Enable the interrupt, clear any pending status */ |
| I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16)); |
| (void) I915_READ(reg); |
| } |
| } |
| |
| void |
| i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) |
| { |
| if ((dev_priv->pipestat[pipe] & mask) != 0) { |
| u32 reg = i915_pipestat(pipe); |
| |
| dev_priv->pipestat[pipe] &= ~mask; |
| I915_WRITE(reg, dev_priv->pipestat[pipe]); |
| (void) I915_READ(reg); |
| } |
| } |
| |
| /** |
| * i915_pipe_enabled - check if a pipe is enabled |
| * @dev: DRM device |
| * @pipe: pipe to check |
| * |
| * Reading certain registers when the pipe is disabled can hang the chip. |
| * Use this routine to make sure the PLL is running and the pipe is active |
| * before reading such registers if unsure. |
| */ |
| static int |
| i915_pipe_enabled(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF; |
| |
| if (I915_READ(pipeconf) & PIPEACONF_ENABLE) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed a 'crtc', which |
| * we use as a pipe index |
| */ |
| u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long high_frame; |
| unsigned long low_frame; |
| u32 high1, high2, low, count; |
| |
| high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; |
| low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; |
| |
| if (!i915_pipe_enabled(dev, pipe)) { |
| DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe); |
| return 0; |
| } |
| |
| /* |
| * High & low register fields aren't synchronized, so make sure |
| * we get a low value that's stable across two reads of the high |
| * register. |
| */ |
| do { |
| high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> |
| PIPE_FRAME_HIGH_SHIFT); |
| low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> |
| PIPE_FRAME_LOW_SHIFT); |
| high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> |
| PIPE_FRAME_HIGH_SHIFT); |
| } while (high1 != high2); |
| |
| count = (high1 << 8) | low; |
| |
| return count; |
| } |
| |
| u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45; |
| |
| if (!i915_pipe_enabled(dev, pipe)) { |
| DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe); |
| return 0; |
| } |
| |
| return I915_READ(reg); |
| } |
| |
| /* |
| * Handle hotplug events outside the interrupt handler proper. |
| */ |
| static void i915_hotplug_work_func(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| hotplug_work); |
| struct drm_device *dev = dev_priv->dev; |
| struct drm_mode_config *mode_config = &dev->mode_config; |
| struct drm_connector *connector; |
| |
| if (mode_config->num_connector) { |
| list_for_each_entry(connector, &mode_config->connector_list, head) { |
| struct intel_output *intel_output = to_intel_output(connector); |
| |
| if (intel_output->hot_plug) |
| (*intel_output->hot_plug) (intel_output); |
| } |
| } |
| /* Just fire off a uevent and let userspace tell us what to do */ |
| drm_sysfs_hotplug_event(dev); |
| } |
| |
| irqreturn_t igdng_irq_handler(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int ret = IRQ_NONE; |
| u32 de_iir, gt_iir; |
| u32 new_de_iir, new_gt_iir; |
| struct drm_i915_master_private *master_priv; |
| |
| de_iir = I915_READ(DEIIR); |
| gt_iir = I915_READ(GTIIR); |
| |
| for (;;) { |
| if (de_iir == 0 && gt_iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| I915_WRITE(DEIIR, de_iir); |
| new_de_iir = I915_READ(DEIIR); |
| I915_WRITE(GTIIR, gt_iir); |
| new_gt_iir = I915_READ(GTIIR); |
| |
| if (dev->primary->master) { |
| master_priv = dev->primary->master->driver_priv; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_dispatch = |
| READ_BREADCRUMB(dev_priv); |
| } |
| |
| if (gt_iir & GT_USER_INTERRUPT) { |
| u32 seqno = i915_get_gem_seqno(dev); |
| dev_priv->mm.irq_gem_seqno = seqno; |
| trace_i915_gem_request_complete(dev, seqno); |
| DRM_WAKEUP(&dev_priv->irq_queue); |
| } |
| |
| de_iir = new_de_iir; |
| gt_iir = new_gt_iir; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * i915_error_work_func - do process context error handling work |
| * @work: work struct |
| * |
| * Fire an error uevent so userspace can see that a hang or error |
| * was detected. |
| */ |
| static void i915_error_work_func(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| error_work); |
| struct drm_device *dev = dev_priv->dev; |
| char *error_event[] = { "ERROR=1", NULL }; |
| char *reset_event[] = { "RESET=1", NULL }; |
| char *reset_done_event[] = { "ERROR=0", NULL }; |
| |
| DRM_DEBUG("generating error event\n"); |
| kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event); |
| |
| if (atomic_read(&dev_priv->mm.wedged)) { |
| if (IS_I965G(dev)) { |
| DRM_DEBUG("resetting chip\n"); |
| kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event); |
| if (!i965_reset(dev, GDRST_RENDER)) { |
| atomic_set(&dev_priv->mm.wedged, 0); |
| kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event); |
| } |
| } else { |
| printk("reboot required\n"); |
| } |
| } |
| } |
| |
| /** |
| * i915_capture_error_state - capture an error record for later analysis |
| * @dev: drm device |
| * |
| * Should be called when an error is detected (either a hang or an error |
| * interrupt) to capture error state from the time of the error. Fills |
| * out a structure which becomes available in debugfs for user level tools |
| * to pick up. |
| */ |
| static void i915_capture_error_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_error_state *error; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev_priv->error_lock, flags); |
| if (dev_priv->first_error) |
| goto out; |
| |
| error = kmalloc(sizeof(*error), GFP_ATOMIC); |
| if (!error) { |
| DRM_DEBUG("out ot memory, not capturing error state\n"); |
| goto out; |
| } |
| |
| error->eir = I915_READ(EIR); |
| error->pgtbl_er = I915_READ(PGTBL_ER); |
| error->pipeastat = I915_READ(PIPEASTAT); |
| error->pipebstat = I915_READ(PIPEBSTAT); |
| error->instpm = I915_READ(INSTPM); |
| if (!IS_I965G(dev)) { |
| error->ipeir = I915_READ(IPEIR); |
| error->ipehr = I915_READ(IPEHR); |
| error->instdone = I915_READ(INSTDONE); |
| error->acthd = I915_READ(ACTHD); |
| } else { |
| error->ipeir = I915_READ(IPEIR_I965); |
| error->ipehr = I915_READ(IPEHR_I965); |
| error->instdone = I915_READ(INSTDONE_I965); |
| error->instps = I915_READ(INSTPS); |
| error->instdone1 = I915_READ(INSTDONE1); |
| error->acthd = I915_READ(ACTHD_I965); |
| } |
| |
| do_gettimeofday(&error->time); |
| |
| dev_priv->first_error = error; |
| |
| out: |
| spin_unlock_irqrestore(&dev_priv->error_lock, flags); |
| } |
| |
| /** |
| * i915_handle_error - handle an error interrupt |
| * @dev: drm device |
| * |
| * Do some basic checking of regsiter state at error interrupt time and |
| * dump it to the syslog. Also call i915_capture_error_state() to make |
| * sure we get a record and make it available in debugfs. Fire a uevent |
| * so userspace knows something bad happened (should trigger collection |
| * of a ring dump etc.). |
| */ |
| static void i915_handle_error(struct drm_device *dev, bool wedged) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 eir = I915_READ(EIR); |
| u32 pipea_stats = I915_READ(PIPEASTAT); |
| u32 pipeb_stats = I915_READ(PIPEBSTAT); |
| |
| i915_capture_error_state(dev); |
| |
| printk(KERN_ERR "render error detected, EIR: 0x%08x\n", |
| eir); |
| |
| if (IS_G4X(dev)) { |
| if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) { |
| u32 ipeir = I915_READ(IPEIR_I965); |
| |
| printk(KERN_ERR " IPEIR: 0x%08x\n", |
| I915_READ(IPEIR_I965)); |
| printk(KERN_ERR " IPEHR: 0x%08x\n", |
| I915_READ(IPEHR_I965)); |
| printk(KERN_ERR " INSTDONE: 0x%08x\n", |
| I915_READ(INSTDONE_I965)); |
| printk(KERN_ERR " INSTPS: 0x%08x\n", |
| I915_READ(INSTPS)); |
| printk(KERN_ERR " INSTDONE1: 0x%08x\n", |
| I915_READ(INSTDONE1)); |
| printk(KERN_ERR " ACTHD: 0x%08x\n", |
| I915_READ(ACTHD_I965)); |
| I915_WRITE(IPEIR_I965, ipeir); |
| (void)I915_READ(IPEIR_I965); |
| } |
| if (eir & GM45_ERROR_PAGE_TABLE) { |
| u32 pgtbl_err = I915_READ(PGTBL_ER); |
| printk(KERN_ERR "page table error\n"); |
| printk(KERN_ERR " PGTBL_ER: 0x%08x\n", |
| pgtbl_err); |
| I915_WRITE(PGTBL_ER, pgtbl_err); |
| (void)I915_READ(PGTBL_ER); |
| } |
| } |
| |
| if (IS_I9XX(dev)) { |
| if (eir & I915_ERROR_PAGE_TABLE) { |
| u32 pgtbl_err = I915_READ(PGTBL_ER); |
| printk(KERN_ERR "page table error\n"); |
| printk(KERN_ERR " PGTBL_ER: 0x%08x\n", |
| pgtbl_err); |
| I915_WRITE(PGTBL_ER, pgtbl_err); |
| (void)I915_READ(PGTBL_ER); |
| } |
| } |
| |
| if (eir & I915_ERROR_MEMORY_REFRESH) { |
| printk(KERN_ERR "memory refresh error\n"); |
| printk(KERN_ERR "PIPEASTAT: 0x%08x\n", |
| pipea_stats); |
| printk(KERN_ERR "PIPEBSTAT: 0x%08x\n", |
| pipeb_stats); |
| /* pipestat has already been acked */ |
| } |
| if (eir & I915_ERROR_INSTRUCTION) { |
| printk(KERN_ERR "instruction error\n"); |
| printk(KERN_ERR " INSTPM: 0x%08x\n", |
| I915_READ(INSTPM)); |
| if (!IS_I965G(dev)) { |
| u32 ipeir = I915_READ(IPEIR); |
| |
| printk(KERN_ERR " IPEIR: 0x%08x\n", |
| I915_READ(IPEIR)); |
| printk(KERN_ERR " IPEHR: 0x%08x\n", |
| I915_READ(IPEHR)); |
| printk(KERN_ERR " INSTDONE: 0x%08x\n", |
| I915_READ(INSTDONE)); |
| printk(KERN_ERR " ACTHD: 0x%08x\n", |
| I915_READ(ACTHD)); |
| I915_WRITE(IPEIR, ipeir); |
| (void)I915_READ(IPEIR); |
| } else { |
| u32 ipeir = I915_READ(IPEIR_I965); |
| |
| printk(KERN_ERR " IPEIR: 0x%08x\n", |
| I915_READ(IPEIR_I965)); |
| printk(KERN_ERR " IPEHR: 0x%08x\n", |
| I915_READ(IPEHR_I965)); |
| printk(KERN_ERR " INSTDONE: 0x%08x\n", |
| I915_READ(INSTDONE_I965)); |
| printk(KERN_ERR " INSTPS: 0x%08x\n", |
| I915_READ(INSTPS)); |
| printk(KERN_ERR " INSTDONE1: 0x%08x\n", |
| I915_READ(INSTDONE1)); |
| printk(KERN_ERR " ACTHD: 0x%08x\n", |
| I915_READ(ACTHD_I965)); |
| I915_WRITE(IPEIR_I965, ipeir); |
| (void)I915_READ(IPEIR_I965); |
| } |
| } |
| |
| I915_WRITE(EIR, eir); |
| (void)I915_READ(EIR); |
| eir = I915_READ(EIR); |
| if (eir) { |
| /* |
| * some errors might have become stuck, |
| * mask them. |
| */ |
| DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); |
| I915_WRITE(EMR, I915_READ(EMR) | eir); |
| I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| } |
| |
| if (wedged) { |
| atomic_set(&dev_priv->mm.wedged, 1); |
| |
| /* |
| * Wakeup waiting processes so they don't hang |
| */ |
| printk("i915: Waking up sleeping processes\n"); |
| DRM_WAKEUP(&dev_priv->irq_queue); |
| } |
| |
| queue_work(dev_priv->wq, &dev_priv->error_work); |
| } |
| |
| irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| struct drm_i915_master_private *master_priv; |
| u32 iir, new_iir; |
| u32 pipea_stats, pipeb_stats; |
| u32 vblank_status; |
| u32 vblank_enable; |
| int vblank = 0; |
| unsigned long irqflags; |
| int irq_received; |
| int ret = IRQ_NONE; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| if (IS_IGDNG(dev)) |
| return igdng_irq_handler(dev); |
| |
| iir = I915_READ(IIR); |
| |
| if (IS_I965G(dev)) { |
| vblank_status = I915_START_VBLANK_INTERRUPT_STATUS; |
| vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE; |
| } else { |
| vblank_status = I915_VBLANK_INTERRUPT_STATUS; |
| vblank_enable = I915_VBLANK_INTERRUPT_ENABLE; |
| } |
| |
| for (;;) { |
| irq_received = iir != 0; |
| |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| pipea_stats = I915_READ(PIPEASTAT); |
| pipeb_stats = I915_READ(PIPEBSTAT); |
| |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| i915_handle_error(dev, false); |
| |
| /* |
| * Clear the PIPE(A|B)STAT regs before the IIR |
| */ |
| if (pipea_stats & 0x8000ffff) { |
| if (pipea_stats & PIPE_FIFO_UNDERRUN_STATUS) |
| DRM_DEBUG("pipe a underrun\n"); |
| I915_WRITE(PIPEASTAT, pipea_stats); |
| irq_received = 1; |
| } |
| |
| if (pipeb_stats & 0x8000ffff) { |
| if (pipeb_stats & PIPE_FIFO_UNDERRUN_STATUS) |
| DRM_DEBUG("pipe b underrun\n"); |
| I915_WRITE(PIPEBSTAT, pipeb_stats); |
| irq_received = 1; |
| } |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| |
| if (!irq_received) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* Consume port. Then clear IIR or we'll miss events */ |
| if ((I915_HAS_HOTPLUG(dev)) && |
| (iir & I915_DISPLAY_PORT_INTERRUPT)) { |
| u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); |
| |
| DRM_DEBUG("hotplug event received, stat 0x%08x\n", |
| hotplug_status); |
| if (hotplug_status & dev_priv->hotplug_supported_mask) |
| queue_work(dev_priv->wq, |
| &dev_priv->hotplug_work); |
| |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| I915_READ(PORT_HOTPLUG_STAT); |
| |
| /* EOS interrupts occurs */ |
| if (IS_IGD(dev) && |
| (hotplug_status & CRT_EOS_INT_STATUS)) { |
| u32 temp; |
| |
| DRM_DEBUG("EOS interrupt occurs\n"); |
| /* status is already cleared */ |
| temp = I915_READ(ADPA); |
| temp &= ~ADPA_DAC_ENABLE; |
| I915_WRITE(ADPA, temp); |
| |
| temp = I915_READ(PORT_HOTPLUG_EN); |
| temp &= ~CRT_EOS_INT_EN; |
| I915_WRITE(PORT_HOTPLUG_EN, temp); |
| |
| temp = I915_READ(PORT_HOTPLUG_STAT); |
| if (temp & CRT_EOS_INT_STATUS) |
| I915_WRITE(PORT_HOTPLUG_STAT, |
| CRT_EOS_INT_STATUS); |
| } |
| } |
| |
| I915_WRITE(IIR, iir); |
| new_iir = I915_READ(IIR); /* Flush posted writes */ |
| |
| if (dev->primary->master) { |
| master_priv = dev->primary->master->driver_priv; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_dispatch = |
| READ_BREADCRUMB(dev_priv); |
| } |
| |
| if (iir & I915_USER_INTERRUPT) { |
| u32 seqno = i915_get_gem_seqno(dev); |
| dev_priv->mm.irq_gem_seqno = seqno; |
| trace_i915_gem_request_complete(dev, seqno); |
| DRM_WAKEUP(&dev_priv->irq_queue); |
| dev_priv->hangcheck_count = 0; |
| mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); |
| } |
| |
| if (pipea_stats & vblank_status) { |
| vblank++; |
| drm_handle_vblank(dev, 0); |
| } |
| |
| if (pipeb_stats & vblank_status) { |
| vblank++; |
| drm_handle_vblank(dev, 1); |
| } |
| |
| if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) || |
| (iir & I915_ASLE_INTERRUPT)) |
| opregion_asle_intr(dev); |
| |
| /* With MSI, interrupts are only generated when iir |
| * transitions from zero to nonzero. If another bit got |
| * set while we were handling the existing iir bits, then |
| * we would never get another interrupt. |
| * |
| * This is fine on non-MSI as well, as if we hit this path |
| * we avoid exiting the interrupt handler only to generate |
| * another one. |
| * |
| * Note that for MSI this could cause a stray interrupt report |
| * if an interrupt landed in the time between writing IIR and |
| * the posting read. This should be rare enough to never |
| * trigger the 99% of 100,000 interrupts test for disabling |
| * stray interrupts. |
| */ |
| iir = new_iir; |
| } |
| |
| return ret; |
| } |
| |
| static int i915_emit_irq(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| RING_LOCALS; |
| |
| i915_kernel_lost_context(dev); |
| |
| DRM_DEBUG("\n"); |
| |
| dev_priv->counter++; |
| if (dev_priv->counter > 0x7FFFFFFFUL) |
| dev_priv->counter = 1; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_enqueue = dev_priv->counter; |
| |
| BEGIN_LP_RING(4); |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->counter); |
| OUT_RING(MI_USER_INTERRUPT); |
| ADVANCE_LP_RING(); |
| |
| return dev_priv->counter; |
| } |
| |
| void i915_user_irq_get(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) { |
| if (IS_IGDNG(dev)) |
| igdng_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT); |
| else |
| i915_enable_irq(dev_priv, I915_USER_INTERRUPT); |
| } |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| } |
| |
| void i915_user_irq_put(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); |
| if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) { |
| if (IS_IGDNG(dev)) |
| igdng_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT); |
| else |
| i915_disable_irq(dev_priv, I915_USER_INTERRUPT); |
| } |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| } |
| |
| static int i915_wait_irq(struct drm_device * dev, int irq_nr) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| int ret = 0; |
| |
| DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr, |
| READ_BREADCRUMB(dev_priv)); |
| |
| if (READ_BREADCRUMB(dev_priv) >= irq_nr) { |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); |
| return 0; |
| } |
| |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; |
| |
| i915_user_irq_get(dev); |
| DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ, |
| READ_BREADCRUMB(dev_priv) >= irq_nr); |
| i915_user_irq_put(dev); |
| |
| if (ret == -EBUSY) { |
| DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", |
| READ_BREADCRUMB(dev_priv), (int)dev_priv->counter); |
| } |
| |
| return ret; |
| } |
| |
| /* Needs the lock as it touches the ring. |
| */ |
| int i915_irq_emit(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_irq_emit_t *emit = data; |
| int result; |
| |
| if (!dev_priv || !dev_priv->ring.virtual_start) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| mutex_lock(&dev->struct_mutex); |
| result = i915_emit_irq(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { |
| DRM_ERROR("copy_to_user\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| /* Doesn't need the hardware lock. |
| */ |
| int i915_irq_wait(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_irq_wait_t *irqwait = data; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| return i915_wait_irq(dev, irqwait->irq_seq); |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| int i915_enable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; |
| u32 pipeconf; |
| |
| pipeconf = I915_READ(pipeconf_reg); |
| if (!(pipeconf & PIPEACONF_ENABLE)) |
| return -EINVAL; |
| |
| if (IS_IGDNG(dev)) |
| return 0; |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| if (IS_I965G(dev)) |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_ENABLE); |
| else |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_VBLANK_INTERRUPT_ENABLE); |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| void i915_disable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| if (IS_IGDNG(dev)) |
| return; |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_VBLANK_INTERRUPT_ENABLE | |
| PIPE_START_VBLANK_INTERRUPT_ENABLE); |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| } |
| |
| void i915_enable_interrupt (struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!IS_IGDNG(dev)) |
| opregion_enable_asle(dev); |
| dev_priv->irq_enabled = 1; |
| } |
| |
| |
| /* Set the vblank monitor pipe |
| */ |
| int i915_vblank_pipe_set(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int i915_vblank_pipe_get(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_vblank_pipe_t *pipe = data; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; |
| |
| return 0; |
| } |
| |
| /** |
| * Schedule buffer swap at given vertical blank. |
| */ |
| int i915_vblank_swap(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| /* The delayed swap mechanism was fundamentally racy, and has been |
| * removed. The model was that the client requested a delayed flip/swap |
| * from the kernel, then waited for vblank before continuing to perform |
| * rendering. The problem was that the kernel might wake the client |
| * up before it dispatched the vblank swap (since the lock has to be |
| * held while touching the ringbuffer), in which case the client would |
| * clear and start the next frame before the swap occurred, and |
| * flicker would occur in addition to likely missing the vblank. |
| * |
| * In the absence of this ioctl, userland falls back to a correct path |
| * of waiting for a vblank, then dispatching the swap on its own. |
| * Context switching to userland and back is plenty fast enough for |
| * meeting the requirements of vblank swapping. |
| */ |
| return -EINVAL; |
| } |
| |
| struct drm_i915_gem_request *i915_get_tail_request(struct drm_device *dev) { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| return list_entry(dev_priv->mm.request_list.prev, struct drm_i915_gem_request, list); |
| } |
| |
| /** |
| * This is called when the chip hasn't reported back with completed |
| * batchbuffers in a long time. The first time this is called we simply record |
| * ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses |
| * again, we assume the chip is wedged and try to fix it. |
| */ |
| void i915_hangcheck_elapsed(unsigned long data) |
| { |
| struct drm_device *dev = (struct drm_device *)data; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| uint32_t acthd; |
| |
| if (!IS_I965G(dev)) |
| acthd = I915_READ(ACTHD); |
| else |
| acthd = I915_READ(ACTHD_I965); |
| |
| /* If all work is done then ACTHD clearly hasn't advanced. */ |
| if (list_empty(&dev_priv->mm.request_list) || |
| i915_seqno_passed(i915_get_gem_seqno(dev), i915_get_tail_request(dev)->seqno)) { |
| dev_priv->hangcheck_count = 0; |
| return; |
| } |
| |
| if (dev_priv->last_acthd == acthd && dev_priv->hangcheck_count > 0) { |
| DRM_ERROR("Hangcheck timer elapsed... GPU hung\n"); |
| i915_handle_error(dev, true); |
| return; |
| } |
| |
| /* Reset timer case chip hangs without another request being added */ |
| mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); |
| |
| if (acthd != dev_priv->last_acthd) |
| dev_priv->hangcheck_count = 0; |
| else |
| dev_priv->hangcheck_count++; |
| |
| dev_priv->last_acthd = acthd; |
| } |
| |
| /* drm_dma.h hooks |
| */ |
| static void igdng_irq_preinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| |
| /* XXX hotplug from PCH */ |
| |
| I915_WRITE(DEIMR, 0xffffffff); |
| I915_WRITE(DEIER, 0x0); |
| (void) I915_READ(DEIER); |
| |
| /* and GT */ |
| I915_WRITE(GTIMR, 0xffffffff); |
| I915_WRITE(GTIER, 0x0); |
| (void) I915_READ(GTIER); |
| } |
| |
| static int igdng_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| /* enable kind of interrupts always enabled */ |
| u32 display_mask = DE_MASTER_IRQ_CONTROL /*| DE_PCH_EVENT */; |
| u32 render_mask = GT_USER_INTERRUPT; |
| |
| dev_priv->irq_mask_reg = ~display_mask; |
| dev_priv->de_irq_enable_reg = display_mask; |
| |
| /* should always can generate irq */ |
| I915_WRITE(DEIIR, I915_READ(DEIIR)); |
| I915_WRITE(DEIMR, dev_priv->irq_mask_reg); |
| I915_WRITE(DEIER, dev_priv->de_irq_enable_reg); |
| (void) I915_READ(DEIER); |
| |
| /* user interrupt should be enabled, but masked initial */ |
| dev_priv->gt_irq_mask_reg = 0xffffffff; |
| dev_priv->gt_irq_enable_reg = render_mask; |
| |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg); |
| I915_WRITE(GTIER, dev_priv->gt_irq_enable_reg); |
| (void) I915_READ(GTIER); |
| |
| return 0; |
| } |
| |
| void i915_driver_irq_preinstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| atomic_set(&dev_priv->irq_received, 0); |
| |
| INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); |
| INIT_WORK(&dev_priv->error_work, i915_error_work_func); |
| |
| if (IS_IGDNG(dev)) { |
| igdng_irq_preinstall(dev); |
| return; |
| } |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| I915_WRITE(PIPEASTAT, 0); |
| I915_WRITE(PIPEBSTAT, 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| (void) I915_READ(IER); |
| } |
| |
| int i915_driver_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; |
| u32 error_mask; |
| |
| DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); |
| |
| dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; |
| |
| if (IS_IGDNG(dev)) |
| return igdng_irq_postinstall(dev); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX; |
| |
| dev_priv->pipestat[0] = 0; |
| dev_priv->pipestat[1] = 0; |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); |
| |
| /* Leave other bits alone */ |
| hotplug_en |= HOTPLUG_EN_MASK; |
| I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); |
| |
| dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS | |
| TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS | |
| SDVOB_HOTPLUG_INT_STATUS; |
| if (IS_G4X(dev)) { |
| dev_priv->hotplug_supported_mask |= |
| HDMIB_HOTPLUG_INT_STATUS | |
| HDMIC_HOTPLUG_INT_STATUS | |
| HDMID_HOTPLUG_INT_STATUS; |
| } |
| /* Enable in IER... */ |
| enable_mask |= I915_DISPLAY_PORT_INTERRUPT; |
| /* and unmask in IMR */ |
| i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT); |
| } |
| |
| /* |
| * Enable some error detection, note the instruction error mask |
| * bit is reserved, so we leave it masked. |
| */ |
| if (IS_G4X(dev)) { |
| error_mask = ~(GM45_ERROR_PAGE_TABLE | |
| GM45_ERROR_MEM_PRIV | |
| GM45_ERROR_CP_PRIV | |
| I915_ERROR_MEMORY_REFRESH); |
| } else { |
| error_mask = ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH); |
| } |
| I915_WRITE(EMR, error_mask); |
| |
| /* Disable pipe interrupt enables, clear pending pipe status */ |
| I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); |
| I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); |
| /* Clear pending interrupt status */ |
| I915_WRITE(IIR, I915_READ(IIR)); |
| |
| I915_WRITE(IER, enable_mask); |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IER); |
| |
| opregion_enable_asle(dev); |
| |
| return 0; |
| } |
| |
| static void igdng_irq_uninstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| I915_WRITE(DEIMR, 0xffffffff); |
| I915_WRITE(DEIER, 0x0); |
| I915_WRITE(DEIIR, I915_READ(DEIIR)); |
| |
| I915_WRITE(GTIMR, 0xffffffff); |
| I915_WRITE(GTIER, 0x0); |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| } |
| |
| void i915_driver_irq_uninstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| if (!dev_priv) |
| return; |
| |
| dev_priv->vblank_pipe = 0; |
| |
| if (IS_IGDNG(dev)) { |
| igdng_irq_uninstall(dev); |
| return; |
| } |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| I915_WRITE(PIPEASTAT, 0); |
| I915_WRITE(PIPEBSTAT, 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| |
| I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); |
| I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); |
| I915_WRITE(IIR, I915_READ(IIR)); |
| } |