rt2x00: rt2800 - Make probe_hw function common between PCI and USB.
Refactor the probe_hw code so that more code can be shared between
rt2800pci and rt2800usb.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 58fc1d9..a04e222 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4392,7 +4392,7 @@
}
EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
u16 word;
@@ -4400,6 +4400,11 @@
u8 default_lna_gain;
/*
+ * Read the EEPROM.
+ */
+ rt2800_read_eeprom(rt2x00dev);
+
+ /*
* Start validation of the data that has been read.
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
@@ -4521,9 +4526,8 @@
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 value;
@@ -4681,7 +4685,6 @@
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
/*
* RF value list for rt28xx
@@ -4824,7 +4827,7 @@
{173, 0x61, 0, 9},
};
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
struct channel_info *info;
@@ -5000,7 +5003,72 @@
return 0;
}
-EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+ u32 reg;
+
+ /*
+ * Allocate eeprom data.
+ */
+ retval = rt2800_validate_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2800_init_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
+
+ /*
+ * Initialize hw specifications.
+ */
+ retval = rt2800_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Set device capabilities.
+ */
+ __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
+ if (!rt2x00_is_usb(rt2x00dev))
+ __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
+
+ /*
+ * Set device requirements.
+ */
+ if (!rt2x00_is_soc(rt2x00dev))
+ __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+ if (!rt2800_hwcrypt_disabled(rt2x00dev))
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
+ if (rt2x00_is_usb(rt2x00dev))
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
+ else {
+ __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
+ }
+
+ /*
+ * Set the rssi offset.
+ */
+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_probe_hw);
/*
* IEEE80211 stack callback functions.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 18a0b67..a128cea 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -43,6 +43,9 @@
const unsigned int offset,
const struct rt2x00_field32 field, u32 *reg);
+ void (*read_eeprom)(struct rt2x00_dev *rt2x00dev);
+ bool (*hwcrypt_disabled)(struct rt2x00_dev *rt2x00dev);
+
int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
@@ -114,6 +117,20 @@
return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
}
+static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+ rt2800ops->read_eeprom(rt2x00dev);
+}
+
+static inline bool rt2800_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
+{
+ const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+ return rt2800ops->hwcrypt_disabled(rt2x00dev);
+}
+
static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
@@ -191,9 +208,8 @@
int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev);
void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
u16 *iv16);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 0965540..391e08f 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -54,6 +54,11 @@
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+static bool rt2800pci_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
+{
+ return modparam_nohwcrypt;
+}
+
static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
{
unsigned int i;
@@ -965,85 +970,14 @@
/*
* Device probe functions.
*/
-static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
- /*
- * Read EEPROM into buffer
- */
if (rt2x00_is_soc(rt2x00dev))
rt2800pci_read_eeprom_soc(rt2x00dev);
else if (rt2800pci_efuse_detect(rt2x00dev))
rt2800pci_read_eeprom_efuse(rt2x00dev);
else
rt2800pci_read_eeprom_pci(rt2x00dev);
-
- return rt2800_validate_eeprom(rt2x00dev);
-}
-
-static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
-{
- int retval;
- u32 reg;
-
- /*
- * Allocate eeprom data.
- */
- retval = rt2800pci_validate_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2800_init_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * Enable rfkill polling by setting GPIO direction of the
- * rfkill switch GPIO pin correctly.
- */
- rt2x00pci_register_read(rt2x00dev, GPIO_CTRL, ®);
- rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
- rt2x00pci_register_write(rt2x00dev, GPIO_CTRL, reg);
-
- /*
- * Initialize hw specifications.
- */
- retval = rt2800_probe_hw_mode(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * This device has multiple filters for control frames
- * and has a separate filter for PS Poll frames.
- */
- __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
- /*
- * This device has a pre tbtt interrupt and thus fetches
- * a new beacon directly prior to transmission.
- */
- __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
-
- /*
- * This device requires firmware.
- */
- if (!rt2x00_is_soc(rt2x00dev))
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
- if (!modparam_nohwcrypt)
- __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
-
- /*
- * Set the rssi offset.
- */
- rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-
- return 0;
}
static const struct ieee80211_ops rt2800pci_mac80211_ops = {
@@ -1081,6 +1015,8 @@
.register_multiread = rt2x00pci_register_multiread,
.register_multiwrite = rt2x00pci_register_multiwrite,
.regbusy_read = rt2x00pci_regbusy_read,
+ .read_eeprom = rt2800pci_read_eeprom,
+ .hwcrypt_disabled = rt2800pci_hwcrypt_disabled,
.drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800pci_init_registers,
.drv_get_txwi = rt2800pci_get_txwi,
@@ -1093,7 +1029,7 @@
.tbtt_tasklet = rt2800pci_tbtt_tasklet,
.rxdone_tasklet = rt2800pci_rxdone_tasklet,
.autowake_tasklet = rt2800pci_autowake_tasklet,
- .probe_hw = rt2800pci_probe_hw,
+ .probe_hw = rt2800_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800_check_firmware,
.load_firmware = rt2800_load_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index b13b314..603b65d 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -49,6 +49,11 @@
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+static bool rt2800usb_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
+{
+ return modparam_nohwcrypt;
+}
+
/*
* Queue handlers.
*/
@@ -730,73 +735,27 @@
/*
* Device probe functions.
*/
-static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
if (rt2800_efuse_detect(rt2x00dev))
rt2800_read_eeprom_efuse(rt2x00dev);
else
rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
EEPROM_SIZE);
-
- return rt2800_validate_eeprom(rt2x00dev);
}
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
- u32 reg;
- /*
- * Allocate eeprom data.
- */
- retval = rt2800usb_validate_eeprom(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2800_init_eeprom(rt2x00dev);
+ retval = rt2800_probe_hw(rt2x00dev);
if (retval)
return retval;
/*
- * Enable rfkill polling by setting GPIO direction of the
- * rfkill switch GPIO pin correctly.
+ * Set txstatus timer function.
*/
- rt2x00usb_register_read(rt2x00dev, GPIO_CTRL, ®);
- rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
- rt2x00usb_register_write(rt2x00dev, GPIO_CTRL, reg);
-
- /*
- * Initialize hw specifications.
- */
- retval = rt2800_probe_hw_mode(rt2x00dev);
- if (retval)
- return retval;
-
- /*
- * This device has multiple filters for control frames
- * and has a separate filter for PS Poll frames.
- */
- __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
- /*
- * This device requires firmware.
- */
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
- if (!modparam_nohwcrypt)
- __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
- __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
- __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
-
- rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
-
- /*
- * Set the rssi offset.
- */
- rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+ rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
/*
* Overwrite TX done handler
@@ -842,6 +801,8 @@
.register_multiread = rt2x00usb_register_multiread,
.register_multiwrite = rt2x00usb_register_multiwrite,
.regbusy_read = rt2x00usb_regbusy_read,
+ .read_eeprom = rt2800usb_read_eeprom,
+ .hwcrypt_disabled = rt2800usb_hwcrypt_disabled,
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
.drv_get_txwi = rt2800usb_get_txwi,