STAGING: rtl8192u: fix checkpatch error by adding space after switch
This patch fixes the following checkpatch error:
ERROR: space required before the open parenthesis '('
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.c b/drivers/staging/rtl8192u/ieee80211/dot11d.c
index c6f377a..34edcfa 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.c
@@ -148,7 +148,7 @@
{
PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
- switch(pDot11dInfo->State)
+ switch (pDot11dInfo->State)
{
case DOT11D_STATE_LEARNED:
pDot11dInfo->State = DOT11D_STATE_DONE;
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index 77b9e12..9955042 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -356,7 +356,7 @@
}
}
FORCED_AGG_SETTING:
- switch(pHTInfo->ForcedAMPDUMode )
+ switch (pHTInfo->ForcedAMPDUMode )
{
case HT_AGG_AUTO:
break;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 02c843a..e956da5 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -177,7 +177,7 @@
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tPrimary channel = %d\n", pHTInfoEle->ControlChl);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSenondary channel =");
- switch(pHTInfoEle->ExtChlOffset)
+ switch (pHTInfoEle->ExtChlOffset)
{
case 0:
IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
@@ -195,7 +195,7 @@
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
- switch(pHTInfoEle->OptMode)
+ switch (pHTInfoEle->OptMode)
{
case 0:
IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
@@ -801,7 +801,7 @@
return false;
}
- switch(ieee->mode)
+ switch (ieee->mode)
{
case IEEE_A:
case IEEE_B:
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index cdcb23f..3058120 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -367,7 +367,7 @@
return false;
}
- switch(TID)
+ switch (TID)
{
case 0:
case 3:
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 3f447cc..37cb507 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -34,7 +34,7 @@
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
- switch(Bandwidth)
+ switch (Bandwidth)
{
case HT_CHANNEL_WIDTH_20:
if(priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
@@ -133,7 +133,7 @@
// pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
/*----Store original RFENV control type----*/
- switch(eRFPath)
+ switch (eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
@@ -168,7 +168,7 @@
RetryTimes = ConstRetryTimes;
RF3_Final_Value = 0;
/*----Initialize RF fom connfiguration file----*/
- switch(eRFPath)
+ switch (eRFPath)
{
case RF90_PATH_A:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
@@ -209,7 +209,7 @@
}
/*----Restore RFENV control type----*/;
- switch(eRFPath)
+ switch (eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 6ea9049..7c602d8 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1014,7 +1014,7 @@
inline u16 ieeerate2rtlrate(int rate)
{
- switch(rate){
+ switch (rate){
case 10:
return 0;
case 20:
@@ -1543,7 +1543,7 @@
for (i=0; i<net->rates_len; i++)
{
basic_rate = net->rates[i]&0x7f;
- switch(basic_rate)
+ switch (basic_rate)
{
case MGN_1M: *rate_config |= RRSR_1M; break;
case MGN_2M: *rate_config |= RRSR_2M; break;
@@ -1562,7 +1562,7 @@
for (i=0; i<net->rates_ex_len; i++)
{
basic_rate = net->rates_ex[i]&0x7f;
- switch(basic_rate)
+ switch (basic_rate)
{
case MGN_1M: *rate_config |= RRSR_1M; break;
case MGN_2M: *rate_config |= RRSR_2M; break;
@@ -1698,7 +1698,7 @@
{
u16 N_DBPS = 24;
- switch(DataRate)
+ switch (DataRate)
{
case 60:
N_DBPS = 24;
@@ -1824,7 +1824,7 @@
{
u8 QueueSelect = 0x0; //defualt set to
- switch(QueueID) {
+ switch (QueueID) {
case BE_QUEUE:
QueueSelect = QSLT_BE; //or QSelect = pTcb->priority;
break;
@@ -1870,7 +1870,7 @@
{
u8 ret = DESC90_RATE1M;
- switch(rate) {
+ switch (rate) {
case MGN_1M: ret = DESC90_RATE1M; break;
case MGN_2M: ret = DESC90_RATE2M; break;
case MGN_5_5M: ret = DESC90_RATE5_5M; break;
@@ -2581,7 +2581,7 @@
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 ret = 0;
- switch(priv->rf_chip)
+ switch (priv->rf_chip)
{
case RF_8225:
case RF_8256:
@@ -3019,7 +3019,7 @@
}//end if VersionID == VERSION_819xU_A
//added by vivi, for dlink led, 20080416
- switch(priv->eeprom_CustomerID)
+ switch (priv->eeprom_CustomerID)
{
case EEPROM_CID_RUNTOP:
priv->CustomerID = RT_CID_819x_RUNTOP;
@@ -3035,7 +3035,7 @@
}
- switch(priv->CustomerID)
+ switch (priv->CustomerID)
{
case RT_CID_819x_RUNTOP:
priv->LedStrategy = SW_LED_MODE2;
@@ -3146,7 +3146,7 @@
// Set RRSR, RATR, and BW_OPMODE registers
//
- switch(priv->ieee80211->mode)
+ switch (priv->ieee80211->mode)
{
case WIRELESS_MODE_B:
regBwOpMode = BW_OPMODE_20MHZ;
@@ -4402,7 +4402,7 @@
u8 ret_rate = 0xff;
if(!bIsHT) {
- switch(rate) {
+ switch (rate) {
case DESC90_RATE1M: ret_rate = MGN_1M; break;
case DESC90_RATE2M: ret_rate = MGN_2M; break;
case DESC90_RATE5_5M: ret_rate = MGN_5_5M; break;
@@ -4423,7 +4423,7 @@
}
} else {
- switch(rate) {
+ switch (rate) {
case DESC90_RATEMCS0: ret_rate = MGN_MCS0; break;
case DESC90_RATEMCS1: ret_rate = MGN_MCS1; break;
case DESC90_RATEMCS2: ret_rate = MGN_MCS2; break;
@@ -4890,7 +4890,7 @@
{
report = pcck_buf->cck_agc_rpt & 0xc0;
report = report>>6;
- switch(report)
+ switch (report)
{
//Fixed by Jacken from Bryant 2008-03-20
//Original value is -38 , -26 , -14 , -2
@@ -4913,7 +4913,7 @@
{
report = pcck_buf->cck_agc_rpt & 0x60;
report = report>>5;
- switch(report)
+ switch (report)
{
case 0x3:
rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
@@ -5180,7 +5180,7 @@
else
preamble_guardinterval = 0;// long
- switch(stats->rate)
+ switch (stats->rate)
{
//
// CCK rate
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index bc410f4..3d7a343 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -3581,7 +3581,7 @@
{
if(priv->ieee80211->bfsync_enable == 0)
{
- switch(priv->ieee80211->fsync_state)
+ switch (priv->ieee80211->fsync_state)
{
case Default_Fsync:
dm_StartHWFsync(dev);
@@ -3599,7 +3599,7 @@
}
else
{
- switch(priv->ieee80211->fsync_state)
+ switch (priv->ieee80211->fsync_state)
{
case Default_Fsync:
dm_StartSWFsync(dev);
@@ -3632,7 +3632,7 @@
}
else
{
- switch(priv->ieee80211->fsync_state)
+ switch (priv->ieee80211->fsync_state)
{
case HW_Fsync:
dm_EndHWFsync(dev);
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index fc0de373..f191f04 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -709,7 +709,7 @@
#define CONF_WEP40 0x4
#define CONF_WEP104 0x14
- switch(wrqu->encoding.flags & IW_ENCODE_INDEX){
+ switch (wrqu->encoding.flags & IW_ENCODE_INDEX){
case 0: key_idx = ieee->tx_keyidx; break;
case 1: key_idx = 0; break;
case 2: key_idx = 1; break;
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index fbd5f4b..d5c75ed 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -732,7 +732,7 @@
/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
element_id = pcmd_buff[0];
- switch(element_id)
+ switch (element_id)
{
case RX_TX_FEEDBACK:
cmpk_handle_tx_feedback (dev, pcmd_buff);
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index c6b97e2..0c47775 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -333,7 +333,7 @@
goto download_firmware_fail;
}
- switch(init_step) {
+ switch (init_step) {
case FW_INIT_STEP0_BOOT:
/* Download boot
* initialize command descriptor.
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index a6a8f90..54f4cba 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -710,7 +710,7 @@
//
// Write Data to register and readback
//
- switch(CheckBlock)
+ switch (CheckBlock)
{
case HW90_BLOCK_MAC:
RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!");
@@ -892,7 +892,7 @@
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
- switch(priv->rf_chip)
+ switch (priv->rf_chip)
{
case RF_8256:
PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement
@@ -917,7 +917,7 @@
{
struct r8192_priv *priv = ieee80211_priv(dev);
- switch(priv->rf_chip)
+ switch (priv->rf_chip)
{
case RF_8256:
PHY_RF8256_Config(dev);
@@ -956,7 +956,7 @@
//u32* pRFArray;
u8 ret = 0;
- switch(eRFPath){
+ switch (eRFPath){
case RF90_PATH_A:
for(i = 0;i<RadioA_ArrayLength; i=i+2){
@@ -1026,7 +1026,7 @@
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
- switch(priv->rf_chip)
+ switch (priv->rf_chip)
{
case RF_8225:
#ifdef TO_DO_LIST
@@ -1071,10 +1071,10 @@
priv->SetRFPowerStateInProgress = true;
- switch(priv->rf_chip)
+ switch (priv->rf_chip)
{
case RF_8256:
- switch( eRFPowerState )
+ switch ( eRFPowerState )
{
case eRfOn:
//RF-A, RF-B
@@ -1129,10 +1129,10 @@
{
// Update current RF state variable.
pHalData->eRFPowerState = eRFPowerState;
- switch(pHalData->RFChipID )
+ switch (pHalData->RFChipID )
{
case RF_8256:
- switch(pHalData->eRFPowerState)
+ switch (pHalData->eRFPowerState)
{
case eRfOff:
//
@@ -1283,7 +1283,7 @@
// <3> Fill up RF dependent command.
RfDependCmdCnt = 0;
- switch( priv->rf_chip )
+ switch ( priv->rf_chip )
{
case RF_8225:
if (!(channel >= 1 && channel <= 14))
@@ -1321,7 +1321,7 @@
do{
- switch(*stage)
+ switch (*stage)
{
case 0:
CurrentCmd=&PreCommonCmd[*step];
@@ -1349,7 +1349,7 @@
}
}
- switch(CurrentCmd->CmdID)
+ switch (CurrentCmd->CmdID)
{
case CmdID_SetTxPowerLevel:
if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later!
@@ -1452,7 +1452,7 @@
}
}
//--------------------------------------------
- switch(priv->ieee80211->mode)
+ switch (priv->ieee80211->mode)
{
case WIRELESS_MODE_A:
case WIRELESS_MODE_N_5G:
@@ -1527,7 +1527,7 @@
//<1>Set MAC register
regBwOpMode = read_nic_byte(dev, BW_OPMODE);
- switch(priv->CurrentChannelBW)
+ switch (priv->CurrentChannelBW)
{
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
@@ -1547,7 +1547,7 @@
}
//<2>Set PHY related register
- switch(priv->CurrentChannelBW)
+ switch (priv->CurrentChannelBW)
{
case HT_CHANNEL_WIDTH_20:
// Add by Vivi 20071119
@@ -1617,7 +1617,7 @@
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
//<3>Set RF related register
- switch( priv->rf_chip )
+ switch ( priv->rf_chip )
{
case RF_8225:
#ifdef TO_DO_LIST
@@ -1704,7 +1704,7 @@
Operation = priv->InitialGainOperateType;
- switch(Operation)
+ switch (Operation)
{
case IG_Backup:
RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n");