| /* |
| * Copyright (c) 2004 Video54 Technologies, Inc. |
| * Copyright (c) 2004-2011 Atheros Communications, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| |
| #include "ath9k.h" |
| |
| static const struct ath_rate_table ar5416_11na_ratetable = { |
| 68, |
| 8, /* MCS start */ |
| { |
| [0] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 6000, |
| 5400, 0, 12 }, /* 6 Mb */ |
| [1] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 9000, |
| 7800, 1, 18 }, /* 9 Mb */ |
| [2] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 12000, |
| 10000, 2, 24 }, /* 12 Mb */ |
| [3] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 18000, |
| 13900, 3, 36 }, /* 18 Mb */ |
| [4] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 24000, |
| 17300, 4, 48 }, /* 24 Mb */ |
| [5] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 36000, |
| 23000, 5, 72 }, /* 36 Mb */ |
| [6] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 48000, |
| 27400, 6, 96 }, /* 48 Mb */ |
| [7] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 54000, |
| 29300, 7, 108 }, /* 54 Mb */ |
| [8] = { RC_HT_SDT_2040, WLAN_RC_PHY_HT_20_SS, 6500, |
| 6400, 0, 0 }, /* 6.5 Mb */ |
| [9] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 13000, |
| 12700, 1, 1 }, /* 13 Mb */ |
| [10] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 19500, |
| 18800, 2, 2 }, /* 19.5 Mb */ |
| [11] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 26000, |
| 25000, 3, 3 }, /* 26 Mb */ |
| [12] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 39000, |
| 36700, 4, 4 }, /* 39 Mb */ |
| [13] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 52000, |
| 48100, 5, 5 }, /* 52 Mb */ |
| [14] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 58500, |
| 53500, 6, 6 }, /* 58.5 Mb */ |
| [15] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 65000, |
| 59000, 7, 7 }, /* 65 Mb */ |
| [16] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS_HGI, 72200, |
| 65400, 7, 7 }, /* 75 Mb */ |
| [17] = { RC_INVALID, WLAN_RC_PHY_HT_20_DS, 13000, |
| 12700, 8, 8 }, /* 13 Mb */ |
| [18] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 26000, |
| 24800, 9, 9 }, /* 26 Mb */ |
| [19] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 39000, |
| 36600, 10, 10 }, /* 39 Mb */ |
| [20] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 52000, |
| 48100, 11, 11 }, /* 52 Mb */ |
| [21] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 78000, |
| 69500, 12, 12 }, /* 78 Mb */ |
| [22] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 104000, |
| 89500, 13, 13 }, /* 104 Mb */ |
| [23] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 117000, |
| 98900, 14, 14 }, /* 117 Mb */ |
| [24] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 130000, |
| 108300, 15, 15 }, /* 130 Mb */ |
| [25] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS_HGI, 144400, |
| 120000, 15, 15 }, /* 144.4 Mb */ |
| [26] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 19500, |
| 17400, 16, 16 }, /* 19.5 Mb */ |
| [27] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 39000, |
| 35100, 17, 17 }, /* 39 Mb */ |
| [28] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 58500, |
| 52600, 18, 18 }, /* 58.5 Mb */ |
| [29] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 78000, |
| 70400, 19, 19 }, /* 78 Mb */ |
| [30] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 117000, |
| 104900, 20, 20 }, /* 117 Mb */ |
| [31] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS_HGI, 130000, |
| 115800, 20, 20 }, /* 130 Mb*/ |
| [32] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 156000, |
| 137200, 21, 21 }, /* 156 Mb */ |
| [33] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 173300, |
| 151100, 21, 21 }, /* 173.3 Mb */ |
| [34] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 175500, |
| 152800, 22, 22 }, /* 175.5 Mb */ |
| [35] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 195000, |
| 168400, 22, 22 }, /* 195 Mb*/ |
| [36] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 195000, |
| 168400, 23, 23 }, /* 195 Mb */ |
| [37] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 216700, |
| 185000, 23, 23 }, /* 216.7 Mb */ |
| [38] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 13500, |
| 13200, 0, 0 }, /* 13.5 Mb*/ |
| [39] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 27500, |
| 25900, 1, 1 }, /* 27.0 Mb*/ |
| [40] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 40500, |
| 38600, 2, 2 }, /* 40.5 Mb*/ |
| [41] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 54000, |
| 49800, 3, 3 }, /* 54 Mb */ |
| [42] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 81500, |
| 72200, 4, 4 }, /* 81 Mb */ |
| [43] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 108000, |
| 92900, 5, 5 }, /* 108 Mb */ |
| [44] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 121500, |
| 102700, 6, 6 }, /* 121.5 Mb*/ |
| [45] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 135000, |
| 112000, 7, 7 }, /* 135 Mb */ |
| [46] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, |
| 122000, 7, 7 }, /* 150 Mb */ |
| [47] = { RC_INVALID, WLAN_RC_PHY_HT_40_DS, 27000, |
| 25800, 8, 8 }, /* 27 Mb */ |
| [48] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 54000, |
| 49800, 9, 9 }, /* 54 Mb */ |
| [49] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 81000, |
| 71900, 10, 10 }, /* 81 Mb */ |
| [50] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 108000, |
| 92500, 11, 11 }, /* 108 Mb */ |
| [51] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 162000, |
| 130300, 12, 12 }, /* 162 Mb */ |
| [52] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 216000, |
| 162800, 13, 13 }, /* 216 Mb */ |
| [53] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 243000, |
| 178200, 14, 14 }, /* 243 Mb */ |
| [54] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 270000, |
| 192100, 15, 15 }, /* 270 Mb */ |
| [55] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS_HGI, 300000, |
| 207000, 15, 15 }, /* 300 Mb */ |
| [56] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 40500, |
| 36100, 16, 16 }, /* 40.5 Mb */ |
| [57] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 81000, |
| 72900, 17, 17 }, /* 81 Mb */ |
| [58] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 121500, |
| 108300, 18, 18 }, /* 121.5 Mb */ |
| [59] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 162000, |
| 142000, 19, 19 }, /* 162 Mb */ |
| [60] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 243000, |
| 205100, 20, 20 }, /* 243 Mb */ |
| [61] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS_HGI, 270000, |
| 224700, 20, 20 }, /* 270 Mb */ |
| [62] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 324000, |
| 263100, 21, 21 }, /* 324 Mb */ |
| [63] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 360000, |
| 288000, 21, 21 }, /* 360 Mb */ |
| [64] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 364500, |
| 290700, 22, 22 }, /* 364.5 Mb */ |
| [65] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 405000, |
| 317200, 22, 22 }, /* 405 Mb */ |
| [66] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 405000, |
| 317200, 23, 23 }, /* 405 Mb */ |
| [67] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 450000, |
| 346400, 23, 23 }, /* 450 Mb */ |
| }, |
| 50, /* probe interval */ |
| WLAN_RC_HT_FLAG, /* Phy rates allowed initially */ |
| }; |
| |
| /* 4ms frame limit not used for NG mode. The values filled |
| * for HT are the 64K max aggregate limit */ |
| |
| static const struct ath_rate_table ar5416_11ng_ratetable = { |
| 72, |
| 12, /* MCS start */ |
| { |
| [0] = { RC_ALL, WLAN_RC_PHY_CCK, 1000, |
| 900, 0, 2 }, /* 1 Mb */ |
| [1] = { RC_ALL, WLAN_RC_PHY_CCK, 2000, |
| 1900, 1, 4 }, /* 2 Mb */ |
| [2] = { RC_ALL, WLAN_RC_PHY_CCK, 5500, |
| 4900, 2, 11 }, /* 5.5 Mb */ |
| [3] = { RC_ALL, WLAN_RC_PHY_CCK, 11000, |
| 8100, 3, 22 }, /* 11 Mb */ |
| [4] = { RC_INVALID, WLAN_RC_PHY_OFDM, 6000, |
| 5400, 4, 12 }, /* 6 Mb */ |
| [5] = { RC_INVALID, WLAN_RC_PHY_OFDM, 9000, |
| 7800, 5, 18 }, /* 9 Mb */ |
| [6] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 12000, |
| 10100, 6, 24 }, /* 12 Mb */ |
| [7] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 18000, |
| 14100, 7, 36 }, /* 18 Mb */ |
| [8] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 24000, |
| 17700, 8, 48 }, /* 24 Mb */ |
| [9] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 36000, |
| 23700, 9, 72 }, /* 36 Mb */ |
| [10] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 48000, |
| 27400, 10, 96 }, /* 48 Mb */ |
| [11] = { RC_L_SDT, WLAN_RC_PHY_OFDM, 54000, |
| 30900, 11, 108 }, /* 54 Mb */ |
| [12] = { RC_INVALID, WLAN_RC_PHY_HT_20_SS, 6500, |
| 6400, 0, 0 }, /* 6.5 Mb */ |
| [13] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 13000, |
| 12700, 1, 1 }, /* 13 Mb */ |
| [14] = { RC_HT_SDT_20, WLAN_RC_PHY_HT_20_SS, 19500, |
| 18800, 2, 2 }, /* 19.5 Mb*/ |
| [15] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 26000, |
| 25000, 3, 3 }, /* 26 Mb */ |
| [16] = { RC_HT_SD_20, WLAN_RC_PHY_HT_20_SS, 39000, |
| 36700, 4, 4 }, /* 39 Mb */ |
| [17] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 52000, |
| 48100, 5, 5 }, /* 52 Mb */ |
| [18] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 58500, |
| 53500, 6, 6 }, /* 58.5 Mb */ |
| [19] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS, 65000, |
| 59000, 7, 7 }, /* 65 Mb */ |
| [20] = { RC_HT_S_20, WLAN_RC_PHY_HT_20_SS_HGI, 72200, |
| 65400, 7, 7 }, /* 65 Mb*/ |
| [21] = { RC_INVALID, WLAN_RC_PHY_HT_20_DS, 13000, |
| 12700, 8, 8 }, /* 13 Mb */ |
| [22] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 26000, |
| 24800, 9, 9 }, /* 26 Mb */ |
| [23] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_DS, 39000, |
| 36600, 10, 10 }, /* 39 Mb */ |
| [24] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 52000, |
| 48100, 11, 11 }, /* 52 Mb */ |
| [25] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 78000, |
| 69500, 12, 12 }, /* 78 Mb */ |
| [26] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 104000, |
| 89500, 13, 13 }, /* 104 Mb */ |
| [27] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 117000, |
| 98900, 14, 14 }, /* 117 Mb */ |
| [28] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS, 130000, |
| 108300, 15, 15 }, /* 130 Mb */ |
| [29] = { RC_HT_DT_20, WLAN_RC_PHY_HT_20_DS_HGI, 144400, |
| 120000, 15, 15 }, /* 144.4 Mb */ |
| [30] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 19500, |
| 17400, 16, 16 }, /* 19.5 Mb */ |
| [31] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 39000, |
| 35100, 17, 17 }, /* 39 Mb */ |
| [32] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 58500, |
| 52600, 18, 18 }, /* 58.5 Mb */ |
| [33] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 78000, |
| 70400, 19, 19 }, /* 78 Mb */ |
| [34] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS, 117000, |
| 104900, 20, 20 }, /* 117 Mb */ |
| [35] = { RC_INVALID, WLAN_RC_PHY_HT_20_TS_HGI, 130000, |
| 115800, 20, 20 }, /* 130 Mb */ |
| [36] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 156000, |
| 137200, 21, 21 }, /* 156 Mb */ |
| [37] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 173300, |
| 151100, 21, 21 }, /* 173.3 Mb */ |
| [38] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 175500, |
| 152800, 22, 22 }, /* 175.5 Mb */ |
| [39] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 195000, |
| 168400, 22, 22 }, /* 195 Mb */ |
| [40] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS, 195000, |
| 168400, 23, 23 }, /* 195 Mb */ |
| [41] = { RC_HT_T_20, WLAN_RC_PHY_HT_20_TS_HGI, 216700, |
| 185000, 23, 23 }, /* 216.7 Mb */ |
| [42] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 13500, |
| 13200, 0, 0 }, /* 13.5 Mb */ |
| [43] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 27500, |
| 25900, 1, 1 }, /* 27.0 Mb */ |
| [44] = { RC_HT_SDT_40, WLAN_RC_PHY_HT_40_SS, 40500, |
| 38600, 2, 2 }, /* 40.5 Mb */ |
| [45] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 54000, |
| 49800, 3, 3 }, /* 54 Mb */ |
| [46] = { RC_HT_SD_40, WLAN_RC_PHY_HT_40_SS, 81500, |
| 72200, 4, 4 }, /* 81 Mb */ |
| [47] = { RC_HT_S_40 , WLAN_RC_PHY_HT_40_SS, 108000, |
| 92900, 5, 5 }, /* 108 Mb */ |
| [48] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 121500, |
| 102700, 6, 6 }, /* 121.5 Mb */ |
| [49] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS, 135000, |
| 112000, 7, 7 }, /* 135 Mb */ |
| [50] = { RC_HT_S_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, |
| 122000, 7, 7 }, /* 150 Mb */ |
| [51] = { RC_INVALID, WLAN_RC_PHY_HT_40_DS, 27000, |
| 25800, 8, 8 }, /* 27 Mb */ |
| [52] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 54000, |
| 49800, 9, 9 }, /* 54 Mb */ |
| [53] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_DS, 81000, |
| 71900, 10, 10 }, /* 81 Mb */ |
| [54] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 108000, |
| 92500, 11, 11 }, /* 108 Mb */ |
| [55] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 162000, |
| 130300, 12, 12 }, /* 162 Mb */ |
| [56] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 216000, |
| 162800, 13, 13 }, /* 216 Mb */ |
| [57] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 243000, |
| 178200, 14, 14 }, /* 243 Mb */ |
| [58] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS, 270000, |
| 192100, 15, 15 }, /* 270 Mb */ |
| [59] = { RC_HT_DT_40, WLAN_RC_PHY_HT_40_DS_HGI, 300000, |
| 207000, 15, 15 }, /* 300 Mb */ |
| [60] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 40500, |
| 36100, 16, 16 }, /* 40.5 Mb */ |
| [61] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 81000, |
| 72900, 17, 17 }, /* 81 Mb */ |
| [62] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 121500, |
| 108300, 18, 18 }, /* 121.5 Mb */ |
| [63] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 162000, |
| 142000, 19, 19 }, /* 162 Mb */ |
| [64] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS, 243000, |
| 205100, 20, 20 }, /* 243 Mb */ |
| [65] = { RC_INVALID, WLAN_RC_PHY_HT_40_TS_HGI, 270000, |
| 224700, 20, 20 }, /* 270 Mb */ |
| [66] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 324000, |
| 263100, 21, 21 }, /* 324 Mb */ |
| [67] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 360000, |
| 288000, 21, 21 }, /* 360 Mb */ |
| [68] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 364500, |
| 290700, 22, 22 }, /* 364.5 Mb */ |
| [69] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 405000, |
| 317200, 22, 22 }, /* 405 Mb */ |
| [70] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS, 405000, |
| 317200, 23, 23 }, /* 405 Mb */ |
| [71] = { RC_HT_T_40, WLAN_RC_PHY_HT_40_TS_HGI, 450000, |
| 346400, 23, 23 }, /* 450 Mb */ |
| }, |
| 50, /* probe interval */ |
| WLAN_RC_HT_FLAG, /* Phy rates allowed initially */ |
| }; |
| |
| static const struct ath_rate_table ar5416_11a_ratetable = { |
| 8, |
| 0, |
| { |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ |
| 5400, 0, 12}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ |
| 7800, 1, 18}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ |
| 10000, 2, 24}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ |
| 13900, 3, 36}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ |
| 17300, 4, 48}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ |
| 23000, 5, 72}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ |
| 27400, 6, 96}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ |
| 29300, 7, 108}, |
| }, |
| 50, /* probe interval */ |
| 0, /* Phy rates allowed initially */ |
| }; |
| |
| static const struct ath_rate_table ar5416_11g_ratetable = { |
| 12, |
| 0, |
| { |
| { RC_L_SDT, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ |
| 900, 0, 2}, |
| { RC_L_SDT, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ |
| 1900, 1, 4}, |
| { RC_L_SDT, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ |
| 4900, 2, 11}, |
| { RC_L_SDT, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ |
| 8100, 3, 22}, |
| { RC_INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ |
| 5400, 4, 12}, |
| { RC_INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ |
| 7800, 5, 18}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ |
| 10000, 6, 24}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ |
| 13900, 7, 36}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ |
| 17300, 8, 48}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ |
| 23000, 9, 72}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ |
| 27400, 10, 96}, |
| { RC_L_SDT, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ |
| 29300, 11, 108}, |
| }, |
| 50, /* probe interval */ |
| 0, /* Phy rates allowed initially */ |
| }; |
| |
| static int ath_rc_get_rateindex(struct ath_rate_priv *ath_rc_priv, |
| struct ieee80211_tx_rate *rate) |
| { |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| int rix, i, idx = 0; |
| |
| if (!(rate->flags & IEEE80211_TX_RC_MCS)) |
| return rate->idx; |
| |
| for (i = 0; i < ath_rc_priv->max_valid_rate; i++) { |
| idx = ath_rc_priv->valid_rate_index[i]; |
| |
| if (WLAN_RC_PHY_HT(rate_table->info[idx].phy) && |
| rate_table->info[idx].ratecode == rate->idx) |
| break; |
| } |
| |
| rix = idx; |
| |
| if (rate->flags & IEEE80211_TX_RC_SHORT_GI) |
| rix++; |
| |
| return rix; |
| } |
| |
| static void ath_rc_sort_validrates(struct ath_rate_priv *ath_rc_priv) |
| { |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| u8 i, j, idx, idx_next; |
| |
| for (i = ath_rc_priv->max_valid_rate - 1; i > 0; i--) { |
| for (j = 0; j <= i-1; j++) { |
| idx = ath_rc_priv->valid_rate_index[j]; |
| idx_next = ath_rc_priv->valid_rate_index[j+1]; |
| |
| if (rate_table->info[idx].ratekbps > |
| rate_table->info[idx_next].ratekbps) { |
| ath_rc_priv->valid_rate_index[j] = idx_next; |
| ath_rc_priv->valid_rate_index[j+1] = idx; |
| } |
| } |
| } |
| } |
| |
| static inline |
| int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table, |
| struct ath_rate_priv *ath_rc_priv, |
| u8 cur_valid_txrate, |
| u8 *next_idx) |
| { |
| u8 i; |
| |
| for (i = 0; i < ath_rc_priv->max_valid_rate - 1; i++) { |
| if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { |
| *next_idx = ath_rc_priv->valid_rate_index[i+1]; |
| return 1; |
| } |
| } |
| |
| /* No more valid rates */ |
| *next_idx = 0; |
| |
| return 0; |
| } |
| |
| /* Return true only for single stream */ |
| |
| static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) |
| { |
| if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG)) |
| return 0; |
| if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) |
| return 0; |
| if (WLAN_RC_PHY_TS(phy) && !(capflag & WLAN_RC_TS_FLAG)) |
| return 0; |
| if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG)) |
| return 0; |
| if (!ignore_cw && WLAN_RC_PHY_HT(phy)) |
| if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG)) |
| return 0; |
| return 1; |
| } |
| |
| static inline int |
| ath_rc_get_lower_rix(struct ath_rate_priv *ath_rc_priv, |
| u8 cur_valid_txrate, u8 *next_idx) |
| { |
| int8_t i; |
| |
| for (i = 1; i < ath_rc_priv->max_valid_rate ; i++) { |
| if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { |
| *next_idx = ath_rc_priv->valid_rate_index[i-1]; |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv) |
| { |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| u8 i, hi = 0; |
| |
| for (i = 0; i < rate_table->rate_cnt; i++) { |
| if (rate_table->info[i].rate_flags & RC_LEGACY) { |
| u32 phy = rate_table->info[i].phy; |
| u8 valid_rate_count = 0; |
| |
| if (!ath_rc_valid_phyrate(phy, ath_rc_priv->ht_cap, 0)) |
| continue; |
| |
| valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy]; |
| |
| ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i; |
| ath_rc_priv->valid_phy_ratecnt[phy] += 1; |
| ath_rc_priv->valid_rate_index[i] = true; |
| hi = i; |
| } |
| } |
| |
| return hi; |
| } |
| |
| static inline bool ath_rc_check_legacy(u8 rate, u8 dot11rate, u16 rate_flags, |
| u32 phy, u32 capflag) |
| { |
| if (rate != dot11rate || WLAN_RC_PHY_HT(phy)) |
| return false; |
| |
| if ((rate_flags & WLAN_RC_CAP_MODE(capflag)) != WLAN_RC_CAP_MODE(capflag)) |
| return false; |
| |
| if (!(rate_flags & WLAN_RC_CAP_STREAM(capflag))) |
| return false; |
| |
| return true; |
| } |
| |
| static inline bool ath_rc_check_ht(u8 rate, u8 dot11rate, u16 rate_flags, |
| u32 phy, u32 capflag) |
| { |
| if (rate != dot11rate || !WLAN_RC_PHY_HT(phy)) |
| return false; |
| |
| if (!WLAN_RC_PHY_HT_VALID(rate_flags, capflag)) |
| return false; |
| |
| if (!(rate_flags & WLAN_RC_CAP_STREAM(capflag))) |
| return false; |
| |
| return true; |
| } |
| |
| static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv, bool legacy) |
| { |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| struct ath_rateset *rateset; |
| u32 phy, capflag = ath_rc_priv->ht_cap; |
| u16 rate_flags; |
| u8 i, j, hi = 0, rate, dot11rate, valid_rate_count; |
| |
| if (legacy) |
| rateset = &ath_rc_priv->neg_rates; |
| else |
| rateset = &ath_rc_priv->neg_ht_rates; |
| |
| for (i = 0; i < rateset->rs_nrates; i++) { |
| for (j = 0; j < rate_table->rate_cnt; j++) { |
| phy = rate_table->info[j].phy; |
| rate_flags = rate_table->info[j].rate_flags; |
| rate = rateset->rs_rates[i]; |
| dot11rate = rate_table->info[j].dot11rate; |
| |
| if (legacy && |
| !ath_rc_check_legacy(rate, dot11rate, |
| rate_flags, phy, capflag)) |
| continue; |
| |
| if (!legacy && |
| !ath_rc_check_ht(rate, dot11rate, |
| rate_flags, phy, capflag)) |
| continue; |
| |
| if (!ath_rc_valid_phyrate(phy, capflag, 0)) |
| continue; |
| |
| valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy]; |
| ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = j; |
| ath_rc_priv->valid_phy_ratecnt[phy] += 1; |
| ath_rc_priv->valid_rate_index[j] = true; |
| hi = max(hi, j); |
| } |
| } |
| |
| return hi; |
| } |
| |
| static u8 ath_rc_get_highest_rix(struct ath_rate_priv *ath_rc_priv, |
| int *is_probing) |
| { |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| u32 best_thruput, this_thruput, now_msec; |
| u8 rate, next_rate, best_rate, maxindex, minindex; |
| int8_t index = 0; |
| |
| now_msec = jiffies_to_msecs(jiffies); |
| *is_probing = 0; |
| best_thruput = 0; |
| maxindex = ath_rc_priv->max_valid_rate-1; |
| minindex = 0; |
| best_rate = minindex; |
| |
| /* |
| * Try the higher rate first. It will reduce memory moving time |
| * if we have very good channel characteristics. |
| */ |
| for (index = maxindex; index >= minindex ; index--) { |
| u8 per_thres; |
| |
| rate = ath_rc_priv->valid_rate_index[index]; |
| if (rate > ath_rc_priv->rate_max_phy) |
| continue; |
| |
| /* |
| * For TCP the average collision rate is around 11%, |
| * so we ignore PERs less than this. This is to |
| * prevent the rate we are currently using (whose |
| * PER might be in the 10-15 range because of TCP |
| * collisions) looking worse than the next lower |
| * rate whose PER has decayed close to 0. If we |
| * used to next lower rate, its PER would grow to |
| * 10-15 and we would be worse off then staying |
| * at the current rate. |
| */ |
| per_thres = ath_rc_priv->per[rate]; |
| if (per_thres < 12) |
| per_thres = 12; |
| |
| this_thruput = rate_table->info[rate].user_ratekbps * |
| (100 - per_thres); |
| |
| if (best_thruput <= this_thruput) { |
| best_thruput = this_thruput; |
| best_rate = rate; |
| } |
| } |
| |
| rate = best_rate; |
| |
| /* |
| * Must check the actual rate (ratekbps) to account for |
| * non-monoticity of 11g's rate table |
| */ |
| |
| if (rate >= ath_rc_priv->rate_max_phy) { |
| rate = ath_rc_priv->rate_max_phy; |
| |
| /* Probe the next allowed phy state */ |
| if (ath_rc_get_nextvalid_txrate(rate_table, |
| ath_rc_priv, rate, &next_rate) && |
| (now_msec - ath_rc_priv->probe_time > |
| rate_table->probe_interval) && |
| (ath_rc_priv->hw_maxretry_pktcnt >= 1)) { |
| rate = next_rate; |
| ath_rc_priv->probe_rate = rate; |
| ath_rc_priv->probe_time = now_msec; |
| ath_rc_priv->hw_maxretry_pktcnt = 0; |
| *is_probing = 1; |
| } |
| } |
| |
| if (rate > (ath_rc_priv->rate_table_size - 1)) |
| rate = ath_rc_priv->rate_table_size - 1; |
| |
| if (RC_TS_ONLY(rate_table->info[rate].rate_flags) && |
| (ath_rc_priv->ht_cap & WLAN_RC_TS_FLAG)) |
| return rate; |
| |
| if (RC_DS_OR_LATER(rate_table->info[rate].rate_flags) && |
| (ath_rc_priv->ht_cap & (WLAN_RC_DS_FLAG | WLAN_RC_TS_FLAG))) |
| return rate; |
| |
| if (RC_SS_OR_LEGACY(rate_table->info[rate].rate_flags)) |
| return rate; |
| |
| /* This should not happen */ |
| WARN_ON_ONCE(1); |
| |
| rate = ath_rc_priv->valid_rate_index[0]; |
| |
| return rate; |
| } |
| |
| static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table, |
| struct ieee80211_tx_rate *rate, |
| struct ieee80211_tx_rate_control *txrc, |
| u8 tries, u8 rix, int rtsctsenable) |
| { |
| rate->count = tries; |
| rate->idx = rate_table->info[rix].ratecode; |
| |
| if (txrc->rts || rtsctsenable) |
| rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; |
| |
| if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) { |
| rate->flags |= IEEE80211_TX_RC_MCS; |
| if (WLAN_RC_PHY_40(rate_table->info[rix].phy) && |
| conf_is_ht40(&txrc->hw->conf)) |
| rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; |
| if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy)) |
| rate->flags |= IEEE80211_TX_RC_SHORT_GI; |
| } |
| } |
| |
| static void ath_rc_rate_set_rtscts(struct ath_softc *sc, |
| const struct ath_rate_table *rate_table, |
| struct ieee80211_tx_info *tx_info) |
| { |
| struct ieee80211_bss_conf *bss_conf; |
| |
| if (!tx_info->control.vif) |
| return; |
| /* |
| * For legacy frames, mac80211 takes care of CTS protection. |
| */ |
| if (!(tx_info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) |
| return; |
| |
| bss_conf = &tx_info->control.vif->bss_conf; |
| |
| if (!bss_conf->basic_rates) |
| return; |
| |
| /* |
| * For now, use the lowest allowed basic rate for HT frames. |
| */ |
| tx_info->control.rts_cts_rate_idx = __ffs(bss_conf->basic_rates); |
| } |
| |
| static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, |
| struct ieee80211_tx_rate_control *txrc) |
| { |
| struct ath_softc *sc = priv; |
| struct ath_rate_priv *ath_rc_priv = priv_sta; |
| const struct ath_rate_table *rate_table; |
| struct sk_buff *skb = txrc->skb; |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_tx_rate *rates = tx_info->control.rates; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| __le16 fc = hdr->frame_control; |
| u8 try_per_rate, i = 0, rix; |
| int is_probe = 0; |
| |
| if (rate_control_send_low(sta, priv_sta, txrc)) |
| return; |
| |
| /* |
| * For Multi Rate Retry we use a different number of |
| * retry attempt counts. This ends up looking like this: |
| * |
| * MRR[0] = 4 |
| * MRR[1] = 4 |
| * MRR[2] = 4 |
| * MRR[3] = 8 |
| * |
| */ |
| try_per_rate = 4; |
| |
| rate_table = ath_rc_priv->rate_table; |
| rix = ath_rc_get_highest_rix(ath_rc_priv, &is_probe); |
| |
| if (conf_is_ht(&sc->hw->conf) && |
| (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING)) |
| tx_info->flags |= IEEE80211_TX_CTL_LDPC; |
| |
| if (conf_is_ht(&sc->hw->conf) && |
| (sta->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) |
| tx_info->flags |= (1 << IEEE80211_TX_CTL_STBC_SHIFT); |
| |
| if (is_probe) { |
| /* |
| * Set one try for probe rates. For the |
| * probes don't enable RTS. |
| */ |
| ath_rc_rate_set_series(rate_table, &rates[i++], txrc, |
| 1, rix, 0); |
| /* |
| * Get the next tried/allowed rate. |
| * No RTS for the next series after the probe rate. |
| */ |
| ath_rc_get_lower_rix(ath_rc_priv, rix, &rix); |
| ath_rc_rate_set_series(rate_table, &rates[i++], txrc, |
| try_per_rate, rix, 0); |
| |
| tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; |
| } else { |
| /* |
| * Set the chosen rate. No RTS for first series entry. |
| */ |
| ath_rc_rate_set_series(rate_table, &rates[i++], txrc, |
| try_per_rate, rix, 0); |
| } |
| |
| for ( ; i < 4; i++) { |
| /* |
| * Use twice the number of tries for the last MRR segment. |
| */ |
| if (i + 1 == 4) |
| try_per_rate = 8; |
| |
| ath_rc_get_lower_rix(ath_rc_priv, rix, &rix); |
| |
| /* |
| * All other rates in the series have RTS enabled. |
| */ |
| ath_rc_rate_set_series(rate_table, &rates[i], txrc, |
| try_per_rate, rix, 1); |
| } |
| |
| /* |
| * NB:Change rate series to enable aggregation when operating |
| * at lower MCS rates. When first rate in series is MCS2 |
| * in HT40 @ 2.4GHz, series should look like: |
| * |
| * {MCS2, MCS1, MCS0, MCS0}. |
| * |
| * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should |
| * look like: |
| * |
| * {MCS3, MCS2, MCS1, MCS1} |
| * |
| * So, set fourth rate in series to be same as third one for |
| * above conditions. |
| */ |
| if ((sc->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) && |
| (conf_is_ht(&sc->hw->conf))) { |
| u8 dot11rate = rate_table->info[rix].dot11rate; |
| u8 phy = rate_table->info[rix].phy; |
| if (i == 4 && |
| ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) || |
| (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { |
| rates[3].idx = rates[2].idx; |
| rates[3].flags = rates[2].flags; |
| } |
| } |
| |
| /* |
| * Force hardware to use computed duration for next |
| * fragment by disabling multi-rate retry, which |
| * updates duration based on the multi-rate duration table. |
| * |
| * FIXME: Fix duration |
| */ |
| if (ieee80211_has_morefrags(fc) || |
| (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { |
| rates[1].count = rates[2].count = rates[3].count = 0; |
| rates[1].idx = rates[2].idx = rates[3].idx = 0; |
| rates[0].count = ATH_TXMAXTRY; |
| } |
| |
| ath_rc_rate_set_rtscts(sc, rate_table, tx_info); |
| } |
| |
| static void ath_rc_update_per(struct ath_softc *sc, |
| const struct ath_rate_table *rate_table, |
| struct ath_rate_priv *ath_rc_priv, |
| struct ieee80211_tx_info *tx_info, |
| int tx_rate, int xretries, int retries, |
| u32 now_msec) |
| { |
| int count, n_bad_frames; |
| u8 last_per; |
| static const u32 nretry_to_per_lookup[10] = { |
| 100 * 0 / 1, |
| 100 * 1 / 4, |
| 100 * 1 / 2, |
| 100 * 3 / 4, |
| 100 * 4 / 5, |
| 100 * 5 / 6, |
| 100 * 6 / 7, |
| 100 * 7 / 8, |
| 100 * 8 / 9, |
| 100 * 9 / 10 |
| }; |
| |
| last_per = ath_rc_priv->per[tx_rate]; |
| n_bad_frames = tx_info->status.ampdu_len - tx_info->status.ampdu_ack_len; |
| |
| if (xretries) { |
| if (xretries == 1) { |
| ath_rc_priv->per[tx_rate] += 30; |
| if (ath_rc_priv->per[tx_rate] > 100) |
| ath_rc_priv->per[tx_rate] = 100; |
| } else { |
| /* xretries == 2 */ |
| count = ARRAY_SIZE(nretry_to_per_lookup); |
| if (retries >= count) |
| retries = count - 1; |
| |
| /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ |
| ath_rc_priv->per[tx_rate] = |
| (u8)(last_per - (last_per >> 3) + (100 >> 3)); |
| } |
| |
| /* xretries == 1 or 2 */ |
| |
| if (ath_rc_priv->probe_rate == tx_rate) |
| ath_rc_priv->probe_rate = 0; |
| |
| } else { /* xretries == 0 */ |
| count = ARRAY_SIZE(nretry_to_per_lookup); |
| if (retries >= count) |
| retries = count - 1; |
| |
| if (n_bad_frames) { |
| /* new_PER = 7/8*old_PER + 1/8*(currentPER) |
| * Assuming that n_frames is not 0. The current PER |
| * from the retries is 100 * retries / (retries+1), |
| * since the first retries attempts failed, and the |
| * next one worked. For the one that worked, |
| * n_bad_frames subframes out of n_frames wored, |
| * so the PER for that part is |
| * 100 * n_bad_frames / n_frames, and it contributes |
| * 100 * n_bad_frames / (n_frames * (retries+1)) to |
| * the above PER. The expression below is a |
| * simplified version of the sum of these two terms. |
| */ |
| if (tx_info->status.ampdu_len > 0) { |
| int n_frames, n_bad_tries; |
| u8 cur_per, new_per; |
| |
| n_bad_tries = retries * tx_info->status.ampdu_len + |
| n_bad_frames; |
| n_frames = tx_info->status.ampdu_len * (retries + 1); |
| cur_per = (100 * n_bad_tries / n_frames) >> 3; |
| new_per = (u8)(last_per - (last_per >> 3) + cur_per); |
| ath_rc_priv->per[tx_rate] = new_per; |
| } |
| } else { |
| ath_rc_priv->per[tx_rate] = |
| (u8)(last_per - (last_per >> 3) + |
| (nretry_to_per_lookup[retries] >> 3)); |
| } |
| |
| |
| /* |
| * If we got at most one retry then increase the max rate if |
| * this was a probe. Otherwise, ignore the probe. |
| */ |
| if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) { |
| if (retries > 0 || 2 * n_bad_frames > tx_info->status.ampdu_len) { |
| /* |
| * Since we probed with just a single attempt, |
| * any retries means the probe failed. Also, |
| * if the attempt worked, but more than half |
| * the subframes were bad then also consider |
| * the probe a failure. |
| */ |
| ath_rc_priv->probe_rate = 0; |
| } else { |
| u8 probe_rate = 0; |
| |
| ath_rc_priv->rate_max_phy = |
| ath_rc_priv->probe_rate; |
| probe_rate = ath_rc_priv->probe_rate; |
| |
| if (ath_rc_priv->per[probe_rate] > 30) |
| ath_rc_priv->per[probe_rate] = 20; |
| |
| ath_rc_priv->probe_rate = 0; |
| |
| /* |
| * Since this probe succeeded, we allow the next |
| * probe twice as soon. This allows the maxRate |
| * to move up faster if the probes are |
| * successful. |
| */ |
| ath_rc_priv->probe_time = |
| now_msec - rate_table->probe_interval / 2; |
| } |
| } |
| |
| if (retries > 0) { |
| /* |
| * Don't update anything. We don't know if |
| * this was because of collisions or poor signal. |
| */ |
| ath_rc_priv->hw_maxretry_pktcnt = 0; |
| } else { |
| /* |
| * It worked with no retries. First ignore bogus (small) |
| * rssi_ack values. |
| */ |
| if (tx_rate == ath_rc_priv->rate_max_phy && |
| ath_rc_priv->hw_maxretry_pktcnt < 255) { |
| ath_rc_priv->hw_maxretry_pktcnt++; |
| } |
| |
| } |
| } |
| } |
| |
| static void ath_rc_update_ht(struct ath_softc *sc, |
| struct ath_rate_priv *ath_rc_priv, |
| struct ieee80211_tx_info *tx_info, |
| int tx_rate, int xretries, int retries) |
| { |
| u32 now_msec = jiffies_to_msecs(jiffies); |
| int rate; |
| u8 last_per; |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| int size = ath_rc_priv->rate_table_size; |
| |
| if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt)) |
| return; |
| |
| last_per = ath_rc_priv->per[tx_rate]; |
| |
| /* Update PER first */ |
| ath_rc_update_per(sc, rate_table, ath_rc_priv, |
| tx_info, tx_rate, xretries, |
| retries, now_msec); |
| |
| /* |
| * If this rate looks bad (high PER) then stop using it for |
| * a while (except if we are probing). |
| */ |
| if (ath_rc_priv->per[tx_rate] >= 55 && tx_rate > 0 && |
| rate_table->info[tx_rate].ratekbps <= |
| rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) { |
| ath_rc_get_lower_rix(ath_rc_priv, (u8)tx_rate, |
| &ath_rc_priv->rate_max_phy); |
| |
| /* Don't probe for a little while. */ |
| ath_rc_priv->probe_time = now_msec; |
| } |
| |
| /* Make sure the rates below this have lower PER */ |
| /* Monotonicity is kept only for rates below the current rate. */ |
| if (ath_rc_priv->per[tx_rate] < last_per) { |
| for (rate = tx_rate - 1; rate >= 0; rate--) { |
| |
| if (ath_rc_priv->per[rate] > |
| ath_rc_priv->per[rate+1]) { |
| ath_rc_priv->per[rate] = |
| ath_rc_priv->per[rate+1]; |
| } |
| } |
| } |
| |
| /* Maintain monotonicity for rates above the current rate */ |
| for (rate = tx_rate; rate < size - 1; rate++) { |
| if (ath_rc_priv->per[rate+1] < |
| ath_rc_priv->per[rate]) |
| ath_rc_priv->per[rate+1] = |
| ath_rc_priv->per[rate]; |
| } |
| |
| /* Every so often, we reduce the thresholds |
| * and PER (different for CCK and OFDM). */ |
| if (now_msec - ath_rc_priv->per_down_time >= |
| rate_table->probe_interval) { |
| for (rate = 0; rate < size; rate++) { |
| ath_rc_priv->per[rate] = |
| 7 * ath_rc_priv->per[rate] / 8; |
| } |
| |
| ath_rc_priv->per_down_time = now_msec; |
| } |
| |
| ath_debug_stat_retries(ath_rc_priv, tx_rate, xretries, retries, |
| ath_rc_priv->per[tx_rate]); |
| |
| } |
| |
| static void ath_rc_tx_status(struct ath_softc *sc, |
| struct ath_rate_priv *ath_rc_priv, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_tx_rate *rates = tx_info->status.rates; |
| struct ieee80211_tx_rate *rate; |
| int final_ts_idx = 0, xretries = 0, long_retry = 0; |
| u8 flags; |
| u32 i = 0, rix; |
| |
| for (i = 0; i < sc->hw->max_rates; i++) { |
| rate = &tx_info->status.rates[i]; |
| if (rate->idx < 0 || !rate->count) |
| break; |
| |
| final_ts_idx = i; |
| long_retry = rate->count - 1; |
| } |
| |
| if (!(tx_info->flags & IEEE80211_TX_STAT_ACK)) |
| xretries = 1; |
| |
| /* |
| * If the first rate is not the final index, there |
| * are intermediate rate failures to be processed. |
| */ |
| if (final_ts_idx != 0) { |
| for (i = 0; i < final_ts_idx ; i++) { |
| if (rates[i].count != 0 && (rates[i].idx >= 0)) { |
| flags = rates[i].flags; |
| |
| /* If HT40 and we have switched mode from |
| * 40 to 20 => don't update */ |
| |
| if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && |
| !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG)) |
| return; |
| |
| rix = ath_rc_get_rateindex(ath_rc_priv, &rates[i]); |
| ath_rc_update_ht(sc, ath_rc_priv, tx_info, |
| rix, xretries ? 1 : 2, |
| rates[i].count); |
| } |
| } |
| } |
| |
| flags = rates[final_ts_idx].flags; |
| |
| /* If HT40 and we have switched mode from 40 to 20 => don't update */ |
| if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && |
| !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG)) |
| return; |
| |
| rix = ath_rc_get_rateindex(ath_rc_priv, &rates[final_ts_idx]); |
| ath_rc_update_ht(sc, ath_rc_priv, tx_info, rix, xretries, long_retry); |
| ath_debug_stat_rc(ath_rc_priv, rix); |
| } |
| |
| static const |
| struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc, |
| enum ieee80211_band band, |
| bool is_ht) |
| { |
| switch(band) { |
| case IEEE80211_BAND_2GHZ: |
| if (is_ht) |
| return &ar5416_11ng_ratetable; |
| return &ar5416_11g_ratetable; |
| case IEEE80211_BAND_5GHZ: |
| if (is_ht) |
| return &ar5416_11na_ratetable; |
| return &ar5416_11a_ratetable; |
| default: |
| return NULL; |
| } |
| } |
| |
| static void ath_rc_init(struct ath_softc *sc, |
| struct ath_rate_priv *ath_rc_priv) |
| { |
| const struct ath_rate_table *rate_table = ath_rc_priv->rate_table; |
| struct ath_rateset *rateset = &ath_rc_priv->neg_rates; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| u8 i, j, k, hi = 0, hthi = 0; |
| |
| ath_rc_priv->rate_table_size = RATE_TABLE_SIZE; |
| |
| for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) { |
| ath_rc_priv->per[i] = 0; |
| ath_rc_priv->valid_rate_index[i] = 0; |
| } |
| |
| for (i = 0; i < WLAN_RC_PHY_MAX; i++) { |
| for (j = 0; j < RATE_TABLE_SIZE; j++) |
| ath_rc_priv->valid_phy_rateidx[i][j] = 0; |
| ath_rc_priv->valid_phy_ratecnt[i] = 0; |
| } |
| |
| if (!rateset->rs_nrates) { |
| hi = ath_rc_init_validrates(ath_rc_priv); |
| } else { |
| hi = ath_rc_setvalid_rates(ath_rc_priv, true); |
| |
| if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) |
| hthi = ath_rc_setvalid_rates(ath_rc_priv, false); |
| |
| hi = max(hi, hthi); |
| } |
| |
| ath_rc_priv->rate_table_size = hi + 1; |
| ath_rc_priv->rate_max_phy = 0; |
| WARN_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE); |
| |
| for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) { |
| for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) { |
| ath_rc_priv->valid_rate_index[k++] = |
| ath_rc_priv->valid_phy_rateidx[i][j]; |
| } |
| |
| if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, 1) || |
| !ath_rc_priv->valid_phy_ratecnt[i]) |
| continue; |
| |
| ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1]; |
| } |
| WARN_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE); |
| WARN_ON(k > RATE_TABLE_SIZE); |
| |
| ath_rc_priv->max_valid_rate = k; |
| ath_rc_sort_validrates(ath_rc_priv); |
| ath_rc_priv->rate_max_phy = (k > 4) ? |
| ath_rc_priv->valid_rate_index[k-4] : |
| ath_rc_priv->valid_rate_index[k-1]; |
| |
| ath_dbg(common, CONFIG, "RC Initialized with capabilities: 0x%x\n", |
| ath_rc_priv->ht_cap); |
| } |
| |
| static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta) |
| { |
| u8 caps = 0; |
| |
| if (sta->ht_cap.ht_supported) { |
| caps = WLAN_RC_HT_FLAG; |
| if (sta->ht_cap.mcs.rx_mask[1] && sta->ht_cap.mcs.rx_mask[2]) |
| caps |= WLAN_RC_TS_FLAG | WLAN_RC_DS_FLAG; |
| else if (sta->ht_cap.mcs.rx_mask[1]) |
| caps |= WLAN_RC_DS_FLAG; |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { |
| caps |= WLAN_RC_40_FLAG; |
| if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) |
| caps |= WLAN_RC_SGI_FLAG; |
| } else { |
| if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) |
| caps |= WLAN_RC_SGI_FLAG; |
| } |
| } |
| |
| return caps; |
| } |
| |
| static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta, |
| u8 tidno) |
| { |
| struct ath_node *an = (struct ath_node *)sta->drv_priv; |
| struct ath_atx_tid *txtid; |
| |
| if (!sta->ht_cap.ht_supported) |
| return false; |
| |
| txtid = ATH_AN_2_TID(an, tidno); |
| return !txtid->active; |
| } |
| |
| |
| /***********************************/ |
| /* mac80211 Rate Control callbacks */ |
| /***********************************/ |
| |
| static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, |
| struct ieee80211_sta *sta, void *priv_sta, |
| struct sk_buff *skb) |
| { |
| struct ath_softc *sc = priv; |
| struct ath_rate_priv *ath_rc_priv = priv_sta; |
| struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| __le16 fc = hdr->frame_control; |
| |
| if (!priv_sta || !ieee80211_is_data(fc)) |
| return; |
| |
| /* This packet was aggregated but doesn't carry status info */ |
| if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && |
| !(tx_info->flags & IEEE80211_TX_STAT_AMPDU)) |
| return; |
| |
| if (tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) |
| return; |
| |
| ath_rc_tx_status(sc, ath_rc_priv, skb); |
| |
| /* Check if aggregation has to be enabled for this tid */ |
| if (conf_is_ht(&sc->hw->conf) && |
| !(skb->protocol == cpu_to_be16(ETH_P_PAE))) { |
| if (ieee80211_is_data_qos(fc) && |
| skb_get_queue_mapping(skb) != IEEE80211_AC_VO) { |
| u8 *qc, tid; |
| |
| qc = ieee80211_get_qos_ctl(hdr); |
| tid = qc[0] & 0xf; |
| |
| if(ath_tx_aggr_check(sc, sta, tid)) |
| ieee80211_start_tx_ba_session(sta, tid, 0); |
| } |
| } |
| } |
| |
| static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, |
| struct cfg80211_chan_def *chandef, |
| struct ieee80211_sta *sta, void *priv_sta) |
| { |
| struct ath_softc *sc = priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_rate_priv *ath_rc_priv = priv_sta; |
| int i, j = 0; |
| u32 rate_flags = ieee80211_chandef_rate_flags(&sc->hw->conf.chandef); |
| |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (sta->supp_rates[sband->band] & BIT(i)) { |
| if ((rate_flags & sband->bitrates[i].flags) |
| != rate_flags) |
| continue; |
| |
| ath_rc_priv->neg_rates.rs_rates[j] |
| = (sband->bitrates[i].bitrate * 2) / 10; |
| j++; |
| } |
| } |
| ath_rc_priv->neg_rates.rs_nrates = j; |
| |
| if (sta->ht_cap.ht_supported) { |
| for (i = 0, j = 0; i < 77; i++) { |
| if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8))) |
| ath_rc_priv->neg_ht_rates.rs_rates[j++] = i; |
| if (j == ATH_RATE_MAX) |
| break; |
| } |
| ath_rc_priv->neg_ht_rates.rs_nrates = j; |
| } |
| |
| ath_rc_priv->rate_table = ath_choose_rate_table(sc, sband->band, |
| sta->ht_cap.ht_supported); |
| if (!ath_rc_priv->rate_table) { |
| ath_err(common, "No rate table chosen\n"); |
| return; |
| } |
| |
| ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta); |
| ath_rc_init(sc, priv_sta); |
| } |
| |
| static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband, |
| struct cfg80211_chan_def *chandef, |
| struct ieee80211_sta *sta, void *priv_sta, |
| u32 changed) |
| { |
| struct ath_softc *sc = priv; |
| struct ath_rate_priv *ath_rc_priv = priv_sta; |
| |
| if (changed & IEEE80211_RC_BW_CHANGED) { |
| ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta); |
| ath_rc_init(sc, priv_sta); |
| |
| ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG, |
| "Operating Bandwidth changed to: %d\n", |
| sc->hw->conf.chandef.width); |
| } |
| } |
| |
| #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS) |
| |
| void ath_debug_stat_rc(struct ath_rate_priv *rc, int final_rate) |
| { |
| struct ath_rc_stats *stats; |
| |
| stats = &rc->rcstats[final_rate]; |
| stats->success++; |
| } |
| |
| void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix, |
| int xretries, int retries, u8 per) |
| { |
| struct ath_rc_stats *stats = &rc->rcstats[rix]; |
| |
| stats->xretries += xretries; |
| stats->retries += retries; |
| stats->per = per; |
| } |
| |
| static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct ath_rate_priv *rc = file->private_data; |
| char *buf; |
| unsigned int len = 0, max; |
| int rix; |
| ssize_t retval; |
| |
| if (rc->rate_table == NULL) |
| return 0; |
| |
| max = 80 + rc->rate_table_size * 1024 + 1; |
| buf = kmalloc(max, GFP_KERNEL); |
| if (buf == NULL) |
| return -ENOMEM; |
| |
| len += sprintf(buf, "%6s %6s %6s " |
| "%10s %10s %10s %10s\n", |
| "HT", "MCS", "Rate", |
| "Success", "Retries", "XRetries", "PER"); |
| |
| for (rix = 0; rix < rc->max_valid_rate; rix++) { |
| u8 i = rc->valid_rate_index[rix]; |
| u32 ratekbps = rc->rate_table->info[i].ratekbps; |
| struct ath_rc_stats *stats = &rc->rcstats[i]; |
| char mcs[5]; |
| char htmode[5]; |
| int used_mcs = 0, used_htmode = 0; |
| |
| if (WLAN_RC_PHY_HT(rc->rate_table->info[i].phy)) { |
| used_mcs = scnprintf(mcs, 5, "%d", |
| rc->rate_table->info[i].ratecode); |
| |
| if (WLAN_RC_PHY_40(rc->rate_table->info[i].phy)) |
| used_htmode = scnprintf(htmode, 5, "HT40"); |
| else if (WLAN_RC_PHY_20(rc->rate_table->info[i].phy)) |
| used_htmode = scnprintf(htmode, 5, "HT20"); |
| else |
| used_htmode = scnprintf(htmode, 5, "????"); |
| } |
| |
| mcs[used_mcs] = '\0'; |
| htmode[used_htmode] = '\0'; |
| |
| len += scnprintf(buf + len, max - len, |
| "%6s %6s %3u.%d: " |
| "%10u %10u %10u %10u\n", |
| htmode, |
| mcs, |
| ratekbps / 1000, |
| (ratekbps % 1000) / 100, |
| stats->success, |
| stats->retries, |
| stats->xretries, |
| stats->per); |
| } |
| |
| if (len > max) |
| len = max; |
| |
| retval = simple_read_from_buffer(user_buf, count, ppos, buf, len); |
| kfree(buf); |
| return retval; |
| } |
| |
| static const struct file_operations fops_rcstat = { |
| .read = read_file_rcstat, |
| .open = simple_open, |
| .owner = THIS_MODULE |
| }; |
| |
| static void ath_rate_add_sta_debugfs(void *priv, void *priv_sta, |
| struct dentry *dir) |
| { |
| struct ath_rate_priv *rc = priv_sta; |
| rc->debugfs_rcstats = debugfs_create_file("rc_stats", S_IRUGO, |
| dir, rc, &fops_rcstat); |
| } |
| |
| static void ath_rate_remove_sta_debugfs(void *priv, void *priv_sta) |
| { |
| struct ath_rate_priv *rc = priv_sta; |
| debugfs_remove(rc->debugfs_rcstats); |
| } |
| |
| #endif /* CONFIG_MAC80211_DEBUGFS && CONFIG_ATH9K_DEBUGFS */ |
| |
| static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) |
| { |
| return hw->priv; |
| } |
| |
| static void ath_rate_free(void *priv) |
| { |
| return; |
| } |
| |
| static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) |
| { |
| return kzalloc(sizeof(struct ath_rate_priv), gfp); |
| } |
| |
| static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, |
| void *priv_sta) |
| { |
| struct ath_rate_priv *rate_priv = priv_sta; |
| kfree(rate_priv); |
| } |
| |
| static struct rate_control_ops ath_rate_ops = { |
| .module = NULL, |
| .name = "ath9k_rate_control", |
| .tx_status = ath_tx_status, |
| .get_rate = ath_get_rate, |
| .rate_init = ath_rate_init, |
| .rate_update = ath_rate_update, |
| .alloc = ath_rate_alloc, |
| .free = ath_rate_free, |
| .alloc_sta = ath_rate_alloc_sta, |
| .free_sta = ath_rate_free_sta, |
| |
| #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS) |
| .add_sta_debugfs = ath_rate_add_sta_debugfs, |
| .remove_sta_debugfs = ath_rate_remove_sta_debugfs, |
| #endif |
| }; |
| |
| int ath_rate_control_register(void) |
| { |
| return ieee80211_rate_control_register(&ath_rate_ops); |
| } |
| |
| void ath_rate_control_unregister(void) |
| { |
| ieee80211_rate_control_unregister(&ath_rate_ops); |
| } |