Input: wacom - add Intuos5 multitouch sensor support

Intuos5 tablets with PTH-* model numbers include a multitouch sensor
which use the same touch reports as the 3rd-generation Bamboo. No
useful information is in the HID descriptor for the touch interface
so hardcoded values are used during setup.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d771338..1c874ad 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -233,6 +233,9 @@
  * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
  * Collection. Instead they define a Logical Collection with a single
  * Logical Maximum for both X and Y.
+ *
+ * Intuos5 touch interface does not contain useful data. We deal with
+ * this after returning from this function.
  */
 static int wacom_parse_hid(struct usb_interface *intf,
 			   struct hid_descriptor *hid_desc,
@@ -1085,6 +1088,28 @@
 	if (error)
 		goto fail3;
 
+	/*
+	 * Intuos5 has no useful data about its touch interface in its
+	 * HID descriptor. If this is the touch interface (wMaxPacketSize
+	 * of WACOM_PKGLEN_BBTOUCH3), override the table values.
+	 */
+	if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+		if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
+			features->device_type = BTN_TOOL_FINGER;
+			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+
+			features->x_phy =
+				(features->x_max * 100) / features->x_resolution;
+			features->y_phy =
+				(features->y_max * 100) / features->y_resolution;
+
+			features->x_max = 4096;
+			features->y_max = 4096;
+		} else {
+			features->device_type = BTN_TOOL_PEN;
+		}
+	}
+
 	wacom_setup_device_quirks(features);
 
 	strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index f4a9efd..a617343 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -321,6 +321,9 @@
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
+		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+			wacom->shared->stylus_in_proximity = true;
+
 		/* serial number of the tool */
 		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
 			(data[4] << 20) + (data[5] << 12) +
@@ -406,6 +409,9 @@
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
+		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+			wacom->shared->stylus_in_proximity = false;
+
 		/*
 		 * Reset all states otherwise we lose the initial states
 		 * when in-prox next time
@@ -1140,9 +1146,6 @@
 	case INTUOS4S:
 	case INTUOS4:
 	case INTUOS4L:
-	case INTUOS5S:
-	case INTUOS5:
-	case INTUOS5L:
 	case CINTIQ:
 	case WACOM_BEE:
 	case WACOM_21UX2:
@@ -1150,6 +1153,15 @@
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		if (len == WACOM_PKGLEN_BBTOUCH3)
+			sync = wacom_bpt3_touch(wacom_wac);
+		else
+			sync = wacom_intuos_irq(wacom_wac);
+		break;
+
 	case TABLETPC:
 	case TABLETPC2FG:
 		sync = wacom_tpc_irq(wacom_wac, len);
@@ -1224,7 +1236,8 @@
 
 	/* these device have multiple inputs */
 	if (features->type == TABLETPC || features->type == TABLETPC2FG ||
-	    features->type == BAMBOO_PT || features->type == WIRELESS)
+	    features->type == BAMBOO_PT || features->type == WIRELESS ||
+	    (features->type >= INTUOS5S && features->type <= INTUOS5L))
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
 	/* quirk for bamboo touch with 2 low res touches */
@@ -1393,13 +1406,54 @@
 
 	case INTUOS5:
 	case INTUOS5L:
+		if (features->device_type == BTN_TOOL_PEN) {
+			__set_bit(BTN_7, input_dev->keybit);
+			__set_bit(BTN_8, input_dev->keybit);
+		}
+		/* fall through */
+
+	case INTUOS5S:
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+		if (features->device_type == BTN_TOOL_PEN) {
+			for (i = 0; i < 7; i++)
+				__set_bit(BTN_0 + i, input_dev->keybit);
+
+			input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+					      features->distance_max,
+					      0, 0);
+
+			input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+			wacom_setup_intuos(wacom_wac);
+		} else if (features->device_type == BTN_TOOL_FINGER) {
+			__clear_bit(ABS_MISC, input_dev->absbit);
+
+			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+			__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+
+			input_mt_init_slots(input_dev, 16);
+
+			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			                     0, 255, 0, 0);
+
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					     0, features->x_max,
+					     features->x_fuzz, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					     0, features->y_max,
+					     features->y_fuzz, 0);
+		}
+		break;
+
 	case INTUOS4:
 	case INTUOS4L:
 		__set_bit(BTN_7, input_dev->keybit);
 		__set_bit(BTN_8, input_dev->keybit);
 		/* fall through */
 
-	case INTUOS5S:
 	case INTUOS4S:
 		for (i = 0; i < 7; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);