V4L/DVB (8644): Add support for DViCO FusionHDTV DVB-T Dual Express
Add support for the DViCO FusionHDTV DVB-T Dual Express card, based on
work by Chris Pascoe and Stephen Backway.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 93ad7f8..7caa246 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -149,6 +149,11 @@
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = {
+ .name = "DViCO FusionHDTV DVB-T Dual Express",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -220,6 +225,10 @@
.subvendor = 0x18ac,
.subdevice = 0xd618,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
+ },{
+ .subvendor = 0x18ac,
+ .subdevice = 0xdb78,
+ .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -340,6 +349,7 @@
bitmask = 0x04;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
if (command == 0) {
/* Two identical tuners on two different i2c buses,
@@ -483,6 +493,19 @@
mdelay(20);
cx_set(GP0_IO, 0x000f000f);
break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+ /* GPIO-0 portb xc3028 reset */
+ /* GPIO-1 portb zl10353 reset */
+ /* GPIO-2 portc xc3028 reset */
+ /* GPIO-3 portc zl10353 reset */
+
+ /* Put the parts into reset and back */
+ cx_set(GP0_IO, 0x000f0000);
+ mdelay(20);
+ cx_clear(GP0_IO, 0x0000000f);
+ mdelay(20);
+ cx_set(GP0_IO, 0x000f000f);
+ break;
}
}
@@ -534,6 +557,7 @@
switch (dev->board) {
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 4567005..dbbbf5b 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -42,6 +42,7 @@
#include "tuner-simple.h"
#include "dib7000p.h"
#include "dibx000_common.h"
+#include "zl10353.h"
static unsigned int debug;
@@ -303,6 +304,12 @@
.output_mode = OUTMODE_MPEG2_SERIAL,
};
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+ .demod_address = 0x0f,
+ .if2 = 45600,
+ .no_tuner = 1,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -465,6 +472,33 @@
&i2c_bus->i2c_adap,
&dvico_xc5000_tunerconfig, i2c_bus);
break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
+ i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+ port->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &i2c_bus->i2c_adap,
+ .i2c_addr = 0x61,
+ .video_dev = port,
+ .callback = cx23885_xc3028_tuner_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028-v27.fw",
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+ &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ }
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 64827fb..08b4c13 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -64,6 +64,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1700 8
#define CX23885_BOARD_HAUPPAUGE_HVR1400 9
#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
+#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\