| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "vf610-pinfunc.h" |
| #include <dt-bindings/clock/vf610-clock.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| aliases { |
| can0 = &can0; |
| can1 = &can1; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| serial4 = &uart4; |
| serial5 = &uart5; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| usbphy0 = &usbphy0; |
| usbphy1 = &usbphy1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a5"; |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sxosc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| |
| fxosc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| aips0: aips-bus@40000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&intc>; |
| reg = <0x40000000 0x70000>; |
| ranges; |
| |
| intc: interrupt-controller@40002000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x40003000 0x1000>, |
| <0x40002100 0x100>; |
| }; |
| |
| L2: l2-cache@40006000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x40006000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| arm,data-latency = <1 1 1>; |
| arm,tag-latency = <2 2 2>; |
| }; |
| |
| edma0: dma-controller@40018000 { |
| #dma-cells = <2>; |
| compatible = "fsl,vf610-edma"; |
| reg = <0x40018000 0x2000>, |
| <0x40024000 0x1000>, |
| <0x40025000 0x1000>; |
| interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, |
| <0 9 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "edma-tx", "edma-err"; |
| dma-channels = <32>; |
| clock-names = "dmamux0", "dmamux1"; |
| clocks = <&clks VF610_CLK_DMAMUX0>, |
| <&clks VF610_CLK_DMAMUX1>; |
| }; |
| |
| can0: flexcan@40020000 { |
| compatible = "fsl,vf610-flexcan"; |
| reg = <0x40020000 0x4000>; |
| interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_FLEXCAN0>, |
| <&clks VF610_CLK_FLEXCAN0>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@40027000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x40027000 0x1000>; |
| interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_UART0>; |
| clock-names = "ipg"; |
| dmas = <&edma0 0 2>, |
| <&edma0 0 3>; |
| dma-names = "rx","tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@40028000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x40028000 0x1000>; |
| interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_UART1>; |
| clock-names = "ipg"; |
| dmas = <&edma0 0 4>, |
| <&edma0 0 5>; |
| dma-names = "rx","tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@40029000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x40029000 0x1000>; |
| interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_UART2>; |
| clock-names = "ipg"; |
| dmas = <&edma0 0 6>, |
| <&edma0 0 7>; |
| dma-names = "rx","tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@4002a000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x4002a000 0x1000>; |
| interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_UART3>; |
| clock-names = "ipg"; |
| dmas = <&edma0 0 8>, |
| <&edma0 0 9>; |
| dma-names = "rx","tx"; |
| status = "disabled"; |
| }; |
| |
| dspi0: dspi0@4002c000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,vf610-dspi"; |
| reg = <0x4002c000 0x1000>; |
| interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_DSPI0>; |
| clock-names = "dspi"; |
| spi-num-chipselects = <5>; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@40031000 { |
| compatible = "fsl,vf610-sai"; |
| reg = <0x40031000 0x1000>; |
| interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_SAI2>; |
| clock-names = "sai"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 0 21>, |
| <&edma0 0 20>; |
| status = "disabled"; |
| }; |
| |
| pit: pit@40037000 { |
| compatible = "fsl,vf610-pit"; |
| reg = <0x40037000 0x1000>; |
| interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_PIT>; |
| clock-names = "pit"; |
| }; |
| |
| pwm0: pwm@40038000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x40038000 0x1000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clks VF610_CLK_FTM0>, |
| <&clks VF610_CLK_FTM0_EXT_SEL>, |
| <&clks VF610_CLK_FTM0_FIX_SEL>, |
| <&clks VF610_CLK_FTM0_EXT_FIX_EN>; |
| status = "disabled"; |
| }; |
| |
| adc0: adc@4003b000 { |
| compatible = "fsl,vf610-adc"; |
| reg = <0x4003b000 0x1000>; |
| interrupts = <0 53 0x04>; |
| clocks = <&clks VF610_CLK_ADC0>; |
| clock-names = "adc"; |
| status = "disabled"; |
| }; |
| |
| wdog@4003e000 { |
| compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; |
| reg = <0x4003e000 0x1000>; |
| clocks = <&clks VF610_CLK_WDT>; |
| clock-names = "wdog"; |
| }; |
| |
| qspi0: quadspi@40044000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,vf610-qspi"; |
| reg = <0x40044000 0x1000>; |
| interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_QSPI0_EN>, |
| <&clks VF610_CLK_QSPI0>; |
| clock-names = "qspi_en", "qspi"; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@40048000 { |
| compatible = "fsl,vf610-iomuxc"; |
| reg = <0x40048000 0x1000>; |
| #gpio-range-cells = <3>; |
| }; |
| |
| gpio1: gpio@40049000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x40049000 0x1000 0x400ff000 0x40>; |
| interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 0 32>; |
| }; |
| |
| gpio2: gpio@4004a000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004a000 0x1000 0x400ff040 0x40>; |
| interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 32 32>; |
| }; |
| |
| gpio3: gpio@4004b000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004b000 0x1000 0x400ff080 0x40>; |
| interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 64 32>; |
| }; |
| |
| gpio4: gpio@4004c000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; |
| interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 96 32>; |
| }; |
| |
| gpio5: gpio@4004d000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004d000 0x1000 0x400ff100 0x40>; |
| interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 128 7>; |
| }; |
| |
| anatop: anatop@40050000 { |
| compatible = "fsl,vf610-anatop", "syscon"; |
| reg = <0x40050000 0x400>; |
| }; |
| |
| usbphy0: usbphy@40050800 { |
| compatible = "fsl,vf610-usbphy"; |
| reg = <0x40050800 0x400>; |
| interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_USBPHY0>; |
| fsl,anatop = <&anatop>; |
| }; |
| |
| usbphy1: usbphy@40050c00 { |
| compatible = "fsl,vf610-usbphy"; |
| reg = <0x40050c00 0x400>; |
| interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_USBPHY1>; |
| fsl,anatop = <&anatop>; |
| }; |
| |
| i2c0: i2c@40066000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,vf610-i2c"; |
| reg = <0x40066000 0x1000>; |
| interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_I2C0>; |
| clock-names = "ipg"; |
| dmas = <&edma0 0 50>, |
| <&edma0 0 51>; |
| dma-names = "rx","tx"; |
| status = "disabled"; |
| }; |
| |
| clks: ccm@4006b000 { |
| compatible = "fsl,vf610-ccm"; |
| reg = <0x4006b000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| usbdev0: usb@40034000 { |
| compatible = "fsl,vf610-usb", "fsl,imx27-usb"; |
| reg = <0x40034000 0x800>; |
| interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_USBC0>; |
| fsl,usbphy = <&usbphy0>; |
| fsl,usbmisc = <&usbmisc0 0>; |
| dr_mode = "peripheral"; |
| status = "disabled"; |
| }; |
| |
| usbmisc0: usb@40034800 { |
| #index-cells = <1>; |
| compatible = "fsl,vf610-usbmisc"; |
| reg = <0x40034800 0x200>; |
| clocks = <&clks VF610_CLK_USBC0>; |
| }; |
| }; |
| |
| aips1: aips-bus@40080000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40080000 0x80000>; |
| ranges; |
| |
| edma1: dma-controller@40098000 { |
| #dma-cells = <2>; |
| compatible = "fsl,vf610-edma"; |
| reg = <0x40098000 0x2000>, |
| <0x400a1000 0x1000>, |
| <0x400a2000 0x1000>; |
| interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>, |
| <0 11 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "edma-tx", "edma-err"; |
| dma-channels = <32>; |
| clock-names = "dmamux0", "dmamux1"; |
| clocks = <&clks VF610_CLK_DMAMUX2>, |
| <&clks VF610_CLK_DMAMUX3>; |
| }; |
| |
| uart4: serial@400a9000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x400a9000 0x1000>; |
| interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_UART4>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@400aa000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x400aa000 0x1000>; |
| interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_UART5>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| adc1: adc@400bb000 { |
| compatible = "fsl,vf610-adc"; |
| reg = <0x400bb000 0x1000>; |
| interrupts = <0 54 0x04>; |
| clocks = <&clks VF610_CLK_ADC1>; |
| clock-names = "adc"; |
| status = "disabled"; |
| }; |
| |
| esdhc1: esdhc@400b2000 { |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x400b2000 0x1000>; |
| interrupts = <0 28 0x04>; |
| clocks = <&clks VF610_CLK_IPG_BUS>, |
| <&clks VF610_CLK_PLATFORM_BUS>, |
| <&clks VF610_CLK_ESDHC1>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| usbh1: usb@400b4000 { |
| compatible = "fsl,vf610-usb", "fsl,imx27-usb"; |
| reg = <0x400b4000 0x800>; |
| interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_USBC1>; |
| fsl,usbphy = <&usbphy1>; |
| fsl,usbmisc = <&usbmisc1 0>; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| usbmisc1: usb@400b4800 { |
| #index-cells = <1>; |
| compatible = "fsl,vf610-usbmisc"; |
| reg = <0x400b4800 0x200>; |
| clocks = <&clks VF610_CLK_USBC1>; |
| }; |
| |
| ftm: ftm@400b8000 { |
| compatible = "fsl,ftm-timer"; |
| reg = <0x400b8000 0x1000 0x400b9000 0x1000>; |
| interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "ftm-evt", "ftm-src", |
| "ftm-evt-counter-en", "ftm-src-counter-en"; |
| clocks = <&clks VF610_CLK_FTM2>, |
| <&clks VF610_CLK_FTM3>, |
| <&clks VF610_CLK_FTM2_EXT_FIX_EN>, |
| <&clks VF610_CLK_FTM3_EXT_FIX_EN>; |
| status = "disabled"; |
| }; |
| |
| fec0: ethernet@400d0000 { |
| compatible = "fsl,mvf600-fec"; |
| reg = <0x400d0000 0x1000>; |
| interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_ENET0>, |
| <&clks VF610_CLK_ENET0>, |
| <&clks VF610_CLK_ENET>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| |
| fec1: ethernet@400d1000 { |
| compatible = "fsl,mvf600-fec"; |
| reg = <0x400d1000 0x1000>; |
| interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_ENET1>, |
| <&clks VF610_CLK_ENET1>, |
| <&clks VF610_CLK_ENET>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| |
| can1: flexcan@400d4000 { |
| compatible = "fsl,vf610-flexcan"; |
| reg = <0x400d4000 0x4000>; |
| interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks VF610_CLK_FLEXCAN1>, |
| <&clks VF610_CLK_FLEXCAN1>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| }; |
| }; |
| }; |