| /* |
| * wm8994-regulator.c -- Regulator driver for the WM8994 |
| * |
| * Copyright 2009 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/wm8994/core.h> |
| #include <linux/mfd/wm8994/registers.h> |
| #include <linux/mfd/wm8994/pdata.h> |
| |
| struct wm8994_ldo { |
| int enable; |
| bool is_enabled; |
| struct regulator_dev *regulator; |
| struct wm8994 *wm8994; |
| }; |
| |
| #define WM8994_LDO1_MAX_SELECTOR 0x7 |
| #define WM8994_LDO2_MAX_SELECTOR 0x3 |
| |
| static int wm8994_ldo_enable(struct regulator_dev *rdev) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| |
| /* If we have no soft control assume that the LDO is always enabled. */ |
| if (!ldo->enable) |
| return 0; |
| |
| gpio_set_value_cansleep(ldo->enable, 1); |
| ldo->is_enabled = true; |
| |
| return 0; |
| } |
| |
| static int wm8994_ldo_disable(struct regulator_dev *rdev) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| |
| /* If we have no soft control assume that the LDO is always enabled. */ |
| if (!ldo->enable) |
| return -EINVAL; |
| |
| gpio_set_value_cansleep(ldo->enable, 0); |
| ldo->is_enabled = false; |
| |
| return 0; |
| } |
| |
| static int wm8994_ldo_is_enabled(struct regulator_dev *rdev) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| |
| return ldo->is_enabled; |
| } |
| |
| static int wm8994_ldo_enable_time(struct regulator_dev *rdev) |
| { |
| /* 3ms is fairly conservative but this shouldn't be too performance |
| * critical; can be tweaked per-system if required. */ |
| return 3000; |
| } |
| |
| static int wm8994_ldo1_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| if (selector > WM8994_LDO1_MAX_SELECTOR) |
| return -EINVAL; |
| |
| return (selector * 100000) + 2400000; |
| } |
| |
| static int wm8994_ldo1_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| int val; |
| |
| val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_1); |
| if (val < 0) |
| return val; |
| |
| return (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT; |
| } |
| |
| static int wm8994_ldo1_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *s) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| int selector, v; |
| |
| selector = (min_uV - 2400000) / 100000; |
| v = wm8994_ldo1_list_voltage(rdev, selector); |
| if (v < 0 || v > max_uV) |
| return -EINVAL; |
| |
| *s = selector; |
| selector <<= WM8994_LDO1_VSEL_SHIFT; |
| |
| return wm8994_set_bits(ldo->wm8994, WM8994_LDO_1, |
| WM8994_LDO1_VSEL_MASK, selector); |
| } |
| |
| static struct regulator_ops wm8994_ldo1_ops = { |
| .enable = wm8994_ldo_enable, |
| .disable = wm8994_ldo_disable, |
| .is_enabled = wm8994_ldo_is_enabled, |
| .enable_time = wm8994_ldo_enable_time, |
| |
| .list_voltage = wm8994_ldo1_list_voltage, |
| .get_voltage_sel = wm8994_ldo1_get_voltage_sel, |
| .set_voltage = wm8994_ldo1_set_voltage, |
| }; |
| |
| static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| |
| if (selector > WM8994_LDO2_MAX_SELECTOR) |
| return -EINVAL; |
| |
| switch (ldo->wm8994->type) { |
| case WM8994: |
| return (selector * 100000) + 900000; |
| case WM8958: |
| return (selector * 100000) + 1000000; |
| case WM1811: |
| switch (selector) { |
| case 0: |
| return -EINVAL; |
| default: |
| return (selector * 100000) + 950000; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int wm8994_ldo2_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| int val; |
| |
| val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_2); |
| if (val < 0) |
| return val; |
| |
| return (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT; |
| } |
| |
| static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *s) |
| { |
| struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); |
| int selector, v; |
| |
| switch (ldo->wm8994->type) { |
| case WM8994: |
| selector = (min_uV - 900000) / 100000; |
| break; |
| case WM8958: |
| selector = (min_uV - 1000000) / 100000; |
| break; |
| case WM1811: |
| selector = (min_uV - 950000) / 100000; |
| if (selector == 0) |
| selector = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| v = wm8994_ldo2_list_voltage(rdev, selector); |
| if (v < 0 || v > max_uV) |
| return -EINVAL; |
| |
| *s = selector; |
| selector <<= WM8994_LDO2_VSEL_SHIFT; |
| |
| return wm8994_set_bits(ldo->wm8994, WM8994_LDO_2, |
| WM8994_LDO2_VSEL_MASK, selector); |
| } |
| |
| static struct regulator_ops wm8994_ldo2_ops = { |
| .enable = wm8994_ldo_enable, |
| .disable = wm8994_ldo_disable, |
| .is_enabled = wm8994_ldo_is_enabled, |
| .enable_time = wm8994_ldo_enable_time, |
| |
| .list_voltage = wm8994_ldo2_list_voltage, |
| .get_voltage_sel = wm8994_ldo2_get_voltage_sel, |
| .set_voltage = wm8994_ldo2_set_voltage, |
| }; |
| |
| static struct regulator_desc wm8994_ldo_desc[] = { |
| { |
| .name = "LDO1", |
| .id = 1, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1, |
| .ops = &wm8994_ldo1_ops, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO2", |
| .id = 2, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1, |
| .ops = &wm8994_ldo2_ops, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static __devinit int wm8994_ldo_probe(struct platform_device *pdev) |
| { |
| struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); |
| struct wm8994_pdata *pdata = wm8994->dev->platform_data; |
| int id = pdev->id % ARRAY_SIZE(pdata->ldo); |
| struct wm8994_ldo *ldo; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); |
| |
| if (!pdata) |
| return -ENODEV; |
| |
| ldo = kzalloc(sizeof(struct wm8994_ldo), GFP_KERNEL); |
| if (ldo == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| ldo->wm8994 = wm8994; |
| |
| if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) { |
| ldo->enable = pdata->ldo[id].enable; |
| |
| ret = gpio_request(ldo->enable, "WM8994 LDO enable"); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", |
| ret); |
| goto err; |
| } |
| |
| ret = gpio_direction_output(ldo->enable, ldo->is_enabled); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to set GPIO up: %d\n", |
| ret); |
| goto err_gpio; |
| } |
| } else |
| ldo->is_enabled = true; |
| |
| ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &pdev->dev, |
| pdata->ldo[id].init_data, ldo, NULL); |
| if (IS_ERR(ldo->regulator)) { |
| ret = PTR_ERR(ldo->regulator); |
| dev_err(wm8994->dev, "Failed to register LDO%d: %d\n", |
| id + 1, ret); |
| goto err_gpio; |
| } |
| |
| platform_set_drvdata(pdev, ldo); |
| |
| return 0; |
| |
| err_gpio: |
| if (gpio_is_valid(ldo->enable)) |
| gpio_free(ldo->enable); |
| err: |
| kfree(ldo); |
| return ret; |
| } |
| |
| static __devexit int wm8994_ldo_remove(struct platform_device *pdev) |
| { |
| struct wm8994_ldo *ldo = platform_get_drvdata(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| regulator_unregister(ldo->regulator); |
| if (gpio_is_valid(ldo->enable)) |
| gpio_free(ldo->enable); |
| kfree(ldo); |
| |
| return 0; |
| } |
| |
| static struct platform_driver wm8994_ldo_driver = { |
| .probe = wm8994_ldo_probe, |
| .remove = __devexit_p(wm8994_ldo_remove), |
| .driver = { |
| .name = "wm8994-ldo", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init wm8994_ldo_init(void) |
| { |
| int ret; |
| |
| ret = platform_driver_register(&wm8994_ldo_driver); |
| if (ret != 0) |
| pr_err("Failed to register Wm8994 GP LDO driver: %d\n", ret); |
| |
| return ret; |
| } |
| subsys_initcall(wm8994_ldo_init); |
| |
| static void __exit wm8994_ldo_exit(void) |
| { |
| platform_driver_unregister(&wm8994_ldo_driver); |
| } |
| module_exit(wm8994_ldo_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("WM8994 LDO driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm8994-ldo"); |