x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
This converts the remaining x86 clocksources to use
clocksource_register_hz/khz.
CC: jacob.jun.pan@intel.com
CC: Glauber Costa <glommer@redhat.com>
CC: Dimitri Sivanich <sivanich@sgi.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Jeremy Fitzhardinge <jeremy@xensource.com>
CC: Chris McDermott <lcm@us.ibm.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 51ef31a..29ebf5a 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -177,7 +177,6 @@
.rating = APBT_CLOCKSOURCE_RATING,
.read = apbt_read_clocksource,
.mask = APBT_MASK,
- .shift = APBT_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = apbt_restart_clocksource,
};
@@ -595,14 +594,7 @@
if (t1 == apbt_read_clocksource(&clocksource_apbt))
panic("APBT counter not counting. APBT disabled\n");
- /*
- * initialize and register APBT clocksource
- * convert that to ns/clock cycle
- * mult = (ns/c) * 2^APBT_SHIFT
- */
- clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
- (unsigned long) apbt_freq, APBT_SHIFT);
- clocksource_register(&clocksource_apbt);
+ clocksource_register_khz(&clocksource_apbt, (u32)apbt_freq*1000);
return 0;
}
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 2dfd315..212fe65 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -188,8 +188,6 @@
.rating = 110,
.read = pit_read,
.mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
};
static int __init init_pit_clocksource(void)
@@ -205,9 +203,7 @@
pit_ce.mode != CLOCK_EVT_MODE_PERIODIC)
return 0;
- pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift);
-
- return clocksource_register(&pit_cs);
+ return clocksource_register_hz(&pit_cs, CLOCK_TICK_RATE);
}
arch_initcall(init_pit_clocksource);
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f98d3ea..6389a6b 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -26,8 +26,6 @@
#include <asm/x86_init.h>
#include <asm/reboot.h>
-#define KVM_SCALE 22
-
static int kvmclock = 1;
static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
@@ -120,8 +118,6 @@
.read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1 << KVM_SCALE,
- .shift = KVM_SCALE,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -203,7 +199,7 @@
machine_ops.crash_shutdown = kvm_crash_shutdown;
#endif
kvm_get_preset_lpj();
- clocksource_register(&kvm_clock);
+ clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
pv_info.paravirt_enabled = 1;
pv_info.name = "KVM";
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index eba687f0..5b96fd9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -913,8 +913,6 @@
.rating = 200,
.read = lguest_clock_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1 << 22,
- .shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -997,7 +995,7 @@
/* Set up the timer interrupt (0) to go to our simple timer routine */
set_irq_handler(0, lguest_time_irq);
- clocksource_register(&lguest_clock);
+ clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 9daf5d1..0eb9018 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -40,7 +40,6 @@
.rating = 400,
.read = uv_read_rtc,
.mask = (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK,
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -372,14 +371,11 @@
if (!is_uv_system())
return -ENODEV;
- clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
- clocksource_uv.shift);
-
/* If single blade, prefer tsc */
if (uv_num_possible_blades() == 1)
clocksource_uv.rating = 250;
- rc = clocksource_register(&clocksource_uv);
+ rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
if (rc)
printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
else
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 067759e..04e1159 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -26,8 +26,6 @@
#include "xen-ops.h"
-#define XEN_SHIFT 22
-
/* Xen may fire a timer up to this many ns early */
#define TIMER_SLOP 100000
#define NS_PER_TICK (1000000000LL / HZ)
@@ -211,8 +209,6 @@
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = ~0,
- .mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
- .shift = XEN_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -446,7 +442,7 @@
int cpu = smp_processor_id();
struct timespec tp;
- clocksource_register(&xen_clocksource);
+ clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
/* Successfully turned off 100Hz tick, so we have the