xhci: replace xhci_readl() with readl()
Function xhci_readl() is used to read 32bit xHC registers residing in MMIO
address space. It takes as first argument a pointer to the xhci_hcd although
it does not use it. xhci_readl() internally simply calls readl(). This creates
an illusion that xhci_readl() is an xhci specific function that has to be
called in a context where a pointer to xhci_hcd is available.
Remove the unnecessary xhci_readl() wrapper function and replace its calls to
with calls to readl() to make the code more straightforward.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 73503a8..eb009a4 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -32,7 +32,7 @@
xhci_dbg(xhci, "// xHCI capability registers at %p:\n",
xhci->cap_regs);
- temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ temp = readl(&xhci->cap_regs->hc_capbase);
xhci_dbg(xhci, "// @%p = 0x%x (CAPLENGTH AND HCIVERSION)\n",
&xhci->cap_regs->hc_capbase, temp);
xhci_dbg(xhci, "// CAPLENGTH: 0x%x\n",
@@ -44,13 +44,13 @@
xhci_dbg(xhci, "// xHCI operational registers at %p:\n", xhci->op_regs);
- temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+ temp = readl(&xhci->cap_regs->run_regs_off);
xhci_dbg(xhci, "// @%p = 0x%x RTSOFF\n",
&xhci->cap_regs->run_regs_off,
(unsigned int) temp & RTSOFF_MASK);
xhci_dbg(xhci, "// xHCI runtime registers at %p:\n", xhci->run_regs);
- temp = xhci_readl(xhci, &xhci->cap_regs->db_off);
+ temp = readl(&xhci->cap_regs->db_off);
xhci_dbg(xhci, "// @%p = 0x%x DBOFF\n", &xhci->cap_regs->db_off, temp);
xhci_dbg(xhci, "// Doorbell array at %p:\n", xhci->dba);
}
@@ -61,7 +61,7 @@
xhci_dbg(xhci, "xHCI capability registers at %p:\n", xhci->cap_regs);
- temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ temp = readl(&xhci->cap_regs->hc_capbase);
xhci_dbg(xhci, "CAPLENGTH AND HCIVERSION 0x%x:\n",
(unsigned int) temp);
xhci_dbg(xhci, "CAPLENGTH: 0x%x\n",
@@ -69,7 +69,7 @@
xhci_dbg(xhci, "HCIVERSION: 0x%x\n",
(unsigned int) HC_VERSION(temp));
- temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+ temp = readl(&xhci->cap_regs->hcs_params1);
xhci_dbg(xhci, "HCSPARAMS 1: 0x%x\n",
(unsigned int) temp);
xhci_dbg(xhci, " Max device slots: %u\n",
@@ -79,7 +79,7 @@
xhci_dbg(xhci, " Max ports: %u\n",
(unsigned int) HCS_MAX_PORTS(temp));
- temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+ temp = readl(&xhci->cap_regs->hcs_params2);
xhci_dbg(xhci, "HCSPARAMS 2: 0x%x\n",
(unsigned int) temp);
xhci_dbg(xhci, " Isoc scheduling threshold: %u\n",
@@ -87,7 +87,7 @@
xhci_dbg(xhci, " Maximum allowed segments in event ring: %u\n",
(unsigned int) HCS_ERST_MAX(temp));
- temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ temp = readl(&xhci->cap_regs->hcs_params3);
xhci_dbg(xhci, "HCSPARAMS 3 0x%x:\n",
(unsigned int) temp);
xhci_dbg(xhci, " Worst case U1 device exit latency: %u\n",
@@ -95,14 +95,14 @@
xhci_dbg(xhci, " Worst case U2 device exit latency: %u\n",
(unsigned int) HCS_U2_LATENCY(temp));
- temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ temp = readl(&xhci->cap_regs->hcc_params);
xhci_dbg(xhci, "HCC PARAMS 0x%x:\n", (unsigned int) temp);
xhci_dbg(xhci, " HC generates %s bit addresses\n",
HCC_64BIT_ADDR(temp) ? "64" : "32");
/* FIXME */
xhci_dbg(xhci, " FIXME: more HCCPARAMS debugging\n");
- temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+ temp = readl(&xhci->cap_regs->run_regs_off);
xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
}
@@ -110,7 +110,7 @@
{
u32 temp;
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
xhci_dbg(xhci, "USBCMD 0x%x:\n", temp);
xhci_dbg(xhci, " HC is %s\n",
(temp & CMD_RUN) ? "running" : "being stopped");
@@ -128,7 +128,7 @@
{
u32 temp;
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
xhci_dbg(xhci, "USBSTS 0x%x:\n", temp);
xhci_dbg(xhci, " Event ring is %sempty\n",
(temp & STS_EINT) ? "not " : "");
@@ -163,7 +163,7 @@
for (j = 0; j < NUM_PORT_REGS; ++j) {
xhci_dbg(xhci, "%p port %s reg = 0x%x\n",
addr, names[j],
- (unsigned int) xhci_readl(xhci, addr));
+ (unsigned int) readl(addr));
addr++;
}
}
@@ -177,7 +177,7 @@
u64 temp_64;
addr = &ir_set->irq_pending;
- temp = xhci_readl(xhci, addr);
+ temp = readl(addr);
if (temp == XHCI_INIT_VALUE)
return;
@@ -187,17 +187,17 @@
(unsigned int)temp);
addr = &ir_set->irq_control;
- temp = xhci_readl(xhci, addr);
+ temp = readl(addr);
xhci_dbg(xhci, " %p: ir_set.control = 0x%x\n", addr,
(unsigned int)temp);
addr = &ir_set->erst_size;
- temp = xhci_readl(xhci, addr);
+ temp = readl(addr);
xhci_dbg(xhci, " %p: ir_set.erst_size = 0x%x\n", addr,
(unsigned int)temp);
addr = &ir_set->rsvd;
- temp = xhci_readl(xhci, addr);
+ temp = readl(addr);
if (temp != XHCI_INIT_VALUE)
xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
addr, (unsigned int)temp);
@@ -219,12 +219,12 @@
int i;
xhci_dbg(xhci, "xHCI runtime registers at %p:\n", xhci->run_regs);
- temp = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+ temp = readl(&xhci->run_regs->microframe_index);
xhci_dbg(xhci, " %p: Microframe index = 0x%x\n",
&xhci->run_regs->microframe_index,
(unsigned int) temp);
for (i = 0; i < 7; ++i) {
- temp = xhci_readl(xhci, &xhci->run_regs->rsvd[i]);
+ temp = readl(&xhci->run_regs->rsvd[i]);
if (temp != XHCI_INIT_VALUE)
xhci_dbg(xhci, " WARN: %p: Rsvd[%i] = 0x%x\n",
&xhci->run_regs->rsvd[i],
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 805f234..70ed7c9 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -94,7 +94,7 @@
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
+ portsc = readl(xhci->usb2_ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
@@ -148,7 +148,7 @@
port_removable = 0;
/* bit 0 is reserved, bit 1 is for port 1, etc. */
for (i = 0; i < ports; i++) {
- portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ portsc = readl(xhci->usb3_ports[i]);
if (portsc & PORT_DEV_REMOVE)
port_removable |= 1 << (i + 1);
}
@@ -343,7 +343,7 @@
/* Write 1 to disable the port */
xhci_writel(xhci, port_status | PORT_PE, addr);
- port_status = xhci_readl(xhci, addr);
+ port_status = readl(addr);
xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n",
wIndex, port_status);
}
@@ -389,7 +389,7 @@
}
/* Change bits are all write 1 to clear */
xhci_writel(xhci, port_status | status, addr);
- port_status = xhci_readl(xhci, addr);
+ port_status = readl(addr);
xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
port_change_bit, wIndex, port_status);
}
@@ -415,7 +415,7 @@
{
u32 temp;
- temp = xhci_readl(xhci, port_array[port_id]);
+ temp = readl(port_array[port_id]);
temp = xhci_port_state_to_neutral(temp);
temp &= ~PORT_PLS_MASK;
temp |= PORT_LINK_STROBE | link_state;
@@ -427,7 +427,7 @@
{
u32 temp;
- temp = xhci_readl(xhci, port_array[port_id]);
+ temp = readl(port_array[port_id]);
temp = xhci_port_state_to_neutral(temp);
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
@@ -454,7 +454,7 @@
{
u32 temp;
- temp = xhci_readl(xhci, port_array[port_id]);
+ temp = readl(port_array[port_id]);
if (temp & port_bit) {
temp = xhci_port_state_to_neutral(temp);
temp |= port_bit;
@@ -623,8 +623,7 @@
}
xhci_ring_device(xhci, slot_id);
} else {
- int port_status = xhci_readl(xhci,
- port_array[wIndex]);
+ int port_status = readl(port_array[wIndex]);
xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
XHCI_MAX_REXIT_TIMEOUT,
port_status);
@@ -733,12 +732,12 @@
/* Set the U1 and U2 exit latencies. */
memcpy(buf, &usb_bos_descriptor,
USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
- temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+ temp = readl(&xhci->cap_regs->hcs_params3);
buf[12] = HCS_U1_LATENCY(temp);
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
/* Indicate whether the host has LTM support. */
- temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ temp = readl(&xhci->cap_regs->hcc_params);
if (HCC_LTC(temp))
buf[8] |= USB_LTM_SUPPORT;
@@ -748,7 +747,7 @@
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
@@ -775,7 +774,7 @@
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
@@ -784,7 +783,7 @@
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
xhci_set_link_state(xhci, port_array, wIndex,
@@ -797,7 +796,7 @@
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending device "
@@ -822,11 +821,11 @@
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
@@ -841,7 +840,7 @@
PORT_CEC;
xhci_writel(xhci, temp | PORT_PE,
port_array[wIndex]);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
break;
}
@@ -850,7 +849,7 @@
xhci_dbg(xhci, "Enable port %d\n", wIndex);
xhci_set_link_state(xhci, port_array, wIndex,
link_state);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
break;
}
@@ -884,7 +883,7 @@
msleep(20); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
if (link_state == USB_SS_PORT_LS_U3)
bus_state->suspended_ports |= 1 << wIndex;
break;
@@ -898,7 +897,7 @@
xhci_writel(xhci, temp | PORT_POWER,
port_array[wIndex]);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -913,13 +912,13 @@
temp = (temp | PORT_RESET);
xhci_writel(xhci, temp, port_array[wIndex]);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
xhci_set_remote_wake_mask(xhci, port_array,
wIndex, wake_mask);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
xhci_dbg(xhci, "set port remote wake mask, "
"actual port %d status = 0x%x\n",
wIndex, temp);
@@ -928,12 +927,12 @@
temp |= PORT_WR;
xhci_writel(xhci, temp, port_array[wIndex]);
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
if (hcd->speed != HCD_USB3)
goto error;
- temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
+ temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
temp |= PORT_U1_TIMEOUT(timeout);
xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
@@ -941,7 +940,7 @@
case USB_PORT_FEAT_U2_TIMEOUT:
if (hcd->speed != HCD_USB3)
goto error;
- temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
+ temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
temp |= PORT_U2_TIMEOUT(timeout);
xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
@@ -950,13 +949,13 @@
goto error;
}
/* unblock any posted writes */
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
break;
case ClearPortFeature:
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
@@ -965,7 +964,7 @@
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = xhci_readl(xhci, port_array[wIndex]);
+ temp = readl(port_array[wIndex]);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
@@ -1070,7 +1069,7 @@
spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < max_ports; i++) {
- temp = xhci_readl(xhci, port_array[i]);
+ temp = readl(port_array[i]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
@@ -1124,7 +1123,7 @@
u32 t1, t2;
int slot_id;
- t1 = xhci_readl(xhci, port_array[port_index]);
+ t1 = readl(port_array[port_index]);
t2 = xhci_port_state_to_neutral(t1);
if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
@@ -1187,7 +1186,7 @@
}
/* delay the irqs */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
temp &= ~CMD_EIE;
xhci_writel(xhci, temp, &xhci->op_regs->command);
@@ -1198,7 +1197,7 @@
u32 temp;
int slot_id;
- temp = xhci_readl(xhci, port_array[port_index]);
+ temp = readl(port_array[port_index]);
if (DEV_SUPERSPEED(temp))
temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
else
@@ -1238,14 +1237,14 @@
xhci_writel(xhci, temp, port_array[port_index]);
}
- (void) xhci_readl(xhci, &xhci->op_regs->command);
+ (void) readl(&xhci->op_regs->command);
bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
/* re-enable irqs */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
temp |= CMD_EIE;
xhci_writel(xhci, temp, &xhci->op_regs->command);
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
spin_unlock_irqrestore(&xhci->lock, flags);
return 0;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 99e7251..3682a3b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1986,7 +1986,7 @@
}
/* Port offset and count in the third dword, see section 7.2 */
- temp = xhci_readl(xhci, addr + 2);
+ temp = readl(addr + 2);
port_offset = XHCI_EXT_PORT_OFF(temp);
port_count = XHCI_EXT_PORT_COUNT(temp);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
@@ -2069,7 +2069,7 @@
int cap_count = 0;
addr = &xhci->cap_regs->hcc_params;
- offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ offset = XHCI_HCC_EXT_CAPS(readl(addr));
if (offset == 0) {
xhci_err(xhci, "No Extended Capability registers, "
"unable to set up roothub.\n");
@@ -2106,7 +2106,7 @@
/* count extended protocol capability entries for later caching */
do {
u32 cap_id;
- cap_id = xhci_readl(xhci, tmp_addr);
+ cap_id = readl(tmp_addr);
if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
cap_count++;
tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
@@ -2120,7 +2120,7 @@
while (1) {
u32 cap_id;
- cap_id = xhci_readl(xhci, addr);
+ cap_id = readl(addr);
if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
xhci_add_in_port(xhci, num_ports, addr,
(u8) XHCI_EXT_PORT_MAJOR(cap_id),
@@ -2224,7 +2224,7 @@
INIT_LIST_HEAD(&xhci->cancel_cmd_list);
- page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
+ page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Supported page size register = 0x%x", page_size);
for (i = 0; i < 16; i++) {
@@ -2247,10 +2247,10 @@
* Program the Number of Device Slots Enabled field in the CONFIG
* register with the max value of slots the HC can handle.
*/
- val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
+ val = HCS_MAX_SLOTS(readl(&xhci->cap_regs->hcs_params1));
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// xHC can handle at most %d device slots.", val);
- val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
+ val2 = readl(&xhci->op_regs->config_reg);
val |= (val2 & ~HCS_SLOTS_MASK);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting Max device slots reg = 0x%x.", val);
@@ -2331,7 +2331,7 @@
*/
xhci->cmd_ring_reserved_trbs++;
- val = xhci_readl(xhci, &xhci->cap_regs->db_off);
+ val = readl(&xhci->cap_regs->db_off);
val &= DBOFF_MASK;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Doorbell array is located at offset 0x%x"
@@ -2382,7 +2382,7 @@
}
/* set ERST count with the number of entries in the segment table */
- val = xhci_readl(xhci, &xhci->ir_set->erst_size);
+ val = readl(&xhci->ir_set->erst_size);
val &= ERST_SIZE_MASK;
val |= ERST_NUM_SEGS;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
@@ -2431,7 +2431,7 @@
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
*/
- temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+ temp = readl(&xhci->op_regs->dev_notification);
temp &= ~DEV_NOTE_MASK;
temp |= DEV_NOTE_FWAKE;
xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 22da093..9f2349b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -297,7 +297,7 @@
xhci_dbg(xhci, "// Ding dong!\n");
xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
/* Flush PCI posted writes */
- xhci_readl(xhci, &xhci->dba->doorbell[0]);
+ readl(&xhci->dba->doorbell[0]);
}
static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
@@ -1739,7 +1739,7 @@
faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
port_id);
- temp = xhci_readl(xhci, port_array[faked_port_index]);
+ temp = readl(port_array[faked_port_index]);
if (hcd->state == HC_STATE_SUSPENDED) {
xhci_dbg(xhci, "resume root hub\n");
usb_hcd_resume_root_hub(hcd);
@@ -1748,7 +1748,7 @@
if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
xhci_dbg(xhci, "port resume event for port %d\n", port_id);
- temp1 = xhci_readl(xhci, &xhci->op_regs->command);
+ temp1 = readl(&xhci->op_regs->command);
if (!(temp1 & CMD_RUN)) {
xhci_warn(xhci, "xHC is not running.\n");
goto cleanup;
@@ -2831,7 +2831,7 @@
spin_lock(&xhci->lock);
/* Check if the xHC generated the interrupt, or the irq is shared */
- status = xhci_readl(xhci, &xhci->op_regs->status);
+ status = readl(&xhci->op_regs->status);
if (status == 0xffffffff)
goto hw_died;
@@ -2860,7 +2860,7 @@
if (hcd->irq) {
u32 irq_pending;
/* Acknowledge the PCI interrupt */
- irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ irq_pending = readl(&xhci->ir_set->irq_pending);
irq_pending |= IMAN_IP;
xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
}
@@ -3931,7 +3931,7 @@
if (ret)
return ret;
- start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+ start_frame = readl(&xhci->run_regs->microframe_index);
start_frame &= 0x3fff;
urb->start_frame = start_frame;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 900ba36..5e6a865 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -60,7 +60,7 @@
u32 result;
do {
- result = xhci_readl(xhci, ptr);
+ result = readl(ptr);
if (result == ~(u32)0) /* card removed */
return -ENODEV;
result &= mask;
@@ -82,11 +82,11 @@
u32 mask;
mask = ~(XHCI_IRQS);
- halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
+ halted = readl(&xhci->op_regs->status) & STS_HALT;
if (!halted)
mask &= ~CMD_RUN;
- cmd = xhci_readl(xhci, &xhci->op_regs->command);
+ cmd = readl(&xhci->op_regs->command);
cmd &= mask;
xhci_writel(xhci, cmd, &xhci->op_regs->command);
}
@@ -124,7 +124,7 @@
u32 temp;
int ret;
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
temp);
@@ -158,14 +158,14 @@
u32 state;
int ret, i;
- state = xhci_readl(xhci, &xhci->op_regs->status);
+ state = readl(&xhci->op_regs->status);
if ((state & STS_HALT) == 0) {
xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
return 0;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_RESET;
xhci_writel(xhci, command, &xhci->op_regs->command);
@@ -422,7 +422,7 @@
xhci = (struct xhci_hcd *)arg;
for (i = 0; i < xhci->num_usb3_ports; i++) {
- temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ temp = readl(xhci->usb3_ports[i]);
if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
/*
* Compliance Mode Detected. Letting USB Core
@@ -611,19 +611,19 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Set the interrupt modulation register");
- temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
temp |= (u32) 160;
xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
/* Set the HCD state before we enable the irqs */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp = readl(&xhci->op_regs->command);
temp |= (CMD_EIE);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Enable interrupts, cmd = 0x%x.", temp);
xhci_writel(xhci, temp, &xhci->op_regs->command);
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp = readl(&xhci->ir_set->irq_pending);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
@@ -698,9 +698,9 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Disabling event ring interrupts");
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp = readl(&xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
xhci_print_ir_set(xhci, 0);
@@ -709,7 +709,7 @@
xhci_mem_cleanup(xhci);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_stop completed - status = %x",
- xhci_readl(xhci, &xhci->op_regs->status));
+ readl(&xhci->op_regs->status));
}
/*
@@ -739,7 +739,7 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_shutdown completed - status = %x",
- xhci_readl(xhci, &xhci->op_regs->status));
+ readl(&xhci->op_regs->status));
/* Yet another workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
@@ -749,15 +749,15 @@
#ifdef CONFIG_PM
static void xhci_save_registers(struct xhci_hcd *xhci)
{
- xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command);
- xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+ xhci->s3.command = readl(&xhci->op_regs->command);
+ xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
- xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
- xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
+ xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
+ xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
}
static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -866,7 +866,7 @@
/* skipped assuming that port suspend has done */
/* step 2: clear Run/Stop bit */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
@@ -885,7 +885,7 @@
xhci_save_registers(xhci);
/* step 4: set CSS flag */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_CSS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (xhci_handshake(xhci, &xhci->op_regs->status,
@@ -951,7 +951,7 @@
xhci_set_cmd_ring_deq(xhci);
/* step 3: restore state and start state*/
/* step 3: set CRS flag */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_CRS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (xhci_handshake(xhci, &xhci->op_regs->status,
@@ -960,7 +960,7 @@
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
}
/* If restore operation fails, re-initialize the HC during resume */
@@ -984,9 +984,9 @@
xhci_cleanup_msix(xhci);
xhci_dbg(xhci, "// Disabling event ring interrupts\n");
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp = readl(&xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
xhci_print_ir_set(xhci, 0);
@@ -994,7 +994,7 @@
xhci_dbg(xhci, "cleaning up memory\n");
xhci_mem_cleanup(xhci);
xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
- xhci_readl(xhci, &xhci->op_regs->status));
+ readl(&xhci->op_regs->status));
/* USB core calls the PCI reinit and start functions twice:
* first with the primary HCD, and then with the secondary HCD.
@@ -1023,7 +1023,7 @@
}
/* step 4: set Run/Stop bit */
- command = xhci_readl(xhci, &xhci->op_regs->command);
+ command = readl(&xhci->op_regs->command);
command |= CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
@@ -1464,7 +1464,7 @@
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret || !urb->hcpriv)
goto done;
- temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp = readl(&xhci->op_regs->status);
if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"HW died, freeing TD.");
@@ -3585,7 +3585,7 @@
spin_lock_irqsave(&xhci->lock, flags);
/* Don't disable the slot if the host controller is dead. */
- state = xhci_readl(xhci, &xhci->op_regs->status);
+ state = readl(&xhci->op_regs->status);
if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
(xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_free_virt_device(xhci, udev->slot_id);
@@ -4042,7 +4042,7 @@
port_array = xhci->usb2_ports;
port_num = udev->portnum - 1;
pm_addr = port_array[port_num] + PORTPMSC;
- pm_val = xhci_readl(xhci, pm_addr);
+ pm_val = readl(pm_addr);
hlpm_addr = port_array[port_num] + PORTHLPMC;
field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
@@ -4084,7 +4084,7 @@
hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
xhci_writel(xhci, hlpm_val, hlpm_addr);
/* flush write */
- xhci_readl(xhci, hlpm_addr);
+ readl(hlpm_addr);
} else {
hird = xhci_calculate_hird_besl(xhci, udev);
}
@@ -4092,16 +4092,16 @@
pm_val &= ~PORT_HIRD_MASK;
pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
xhci_writel(xhci, pm_val, pm_addr);
- pm_val = xhci_readl(xhci, pm_addr);
+ pm_val = readl(pm_addr);
pm_val |= PORT_HLE;
xhci_writel(xhci, pm_val, pm_addr);
/* flush write */
- xhci_readl(xhci, pm_addr);
+ readl(pm_addr);
} else {
pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK);
xhci_writel(xhci, pm_val, pm_addr);
/* flush write */
- xhci_readl(xhci, pm_addr);
+ readl(pm_addr);
if (udev->usb2_hw_lpm_besl_capable) {
spin_unlock_irqrestore(&xhci->lock, flags);
mutex_lock(hcd->bandwidth_mutex);
@@ -4704,7 +4704,7 @@
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
/* EHCI mods by the periodic size. Why? */
- return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
+ return readl(&xhci->run_regs->microframe_index) >> 3;
}
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
@@ -4748,16 +4748,16 @@
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
- HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+ HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
xhci->run_regs = hcd->regs +
- (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+ (readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
/* Cache read-only capability registers */
- xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
- xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
- xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
- xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1);
+ xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2);
+ xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3);
+ xhci->hcc_params = readl(&xhci->cap_regs->hc_capbase);
xhci->hci_version = HC_VERSION(xhci->hcc_params);
- xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ xhci->hcc_params = readl(&xhci->cap_regs->hcc_params);
xhci_print_registers(xhci);
get_quirks(dev, xhci);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index a33e8b5..c727f1e 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1597,11 +1597,6 @@
/* TODO: copied from ehci.h - can be refactored? */
/* xHCI spec says all registers are little endian */
-static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
- __le32 __iomem *regs)
-{
- return readl(regs);
-}
static inline void xhci_writel(struct xhci_hcd *xhci,
const unsigned int val, __le32 __iomem *regs)
{