diff --git a/Documentation/Changes b/Documentation/Changes
index b175808..07c75d1 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -196,13 +196,6 @@
 as root before you can use this.  You'll probably also want to
 get the user-space microcode_ctl utility to use with this.
 
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
 udev
 ----
 udev is a userspace application for populating /dev dynamically with
@@ -366,10 +359,6 @@
 ------------------
 o  <http://www.urbanmyth.org/microcode/>
 
-Powertweak
-----------
-o  <http://powertweak.sourceforge.net/>
-
 udev
 ----
 o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 6c9d9d3..f517008 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -58,7 +58,7 @@
      </sect1>
      <sect1><title>Wait queues and Wake events</title>
 !Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
      </sect1>
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h
diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
index 56564aa..7e49839 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
@@ -1,7 +1,8 @@
 I2C for OMAP platforms
 
 Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+  or "ti,omap4-i2c"
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt b/Documentation/devicetree/bindings/rng/qcom,prng.txt
new file mode 100644
index 0000000..8e5853c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/qcom,prng.txt
@@ -0,0 +1,17 @@
+Qualcomm MSM pseudo random number generator.
+
+Required properties:
+
+- compatible  : should be "qcom,prng"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
+
+Example:
+
+	rng@f9bff000 {
+		compatible = "qcom,prng";
+		reg = <0xf9bff000 0x200>;
+		clocks = <&clock GCC_PRNG_AHB_CLK>;
+		clock-names = "core";
+	};
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
new file mode 100644
index 0000000..0d03506
--- /dev/null
+++ b/Documentation/gpio/board.txt
@@ -0,0 +1,115 @@
+GPIO Mappings
+=============
+
+This document explains how GPIOs can be assigned to given devices and functions.
+Note that it only applies to the new descriptor-based interface. For a
+description of the deprecated integer-based GPIO interface please refer to
+gpio-legacy.txt (actually, there is no real mapping possible with the old
+interface; you just fetch an integer from somewhere and request the
+corresponding GPIO.
+
+Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
+is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
+their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+describe its hardware layout. Currently, mappings can be defined through device
+tree, ACPI, and platform data.
+
+Device Tree
+-----------
+GPIOs can easily be mapped to devices and functions in the device tree. The
+exact way to do it depends on the GPIO controller providing the GPIOs, see the
+device tree bindings for your controller.
+
+GPIOs mappings are defined in the consumer device's node, in a property named
+<function>-gpios, where <function> is the function the driver will request
+through gpiod_get(). For example:
+
+	foo_device {
+		compatible = "acme,foo";
+		...
+		led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
+			    <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
+			    <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
+
+		power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+This property will make GPIOs 15, 16 and 17 available to the driver under the
+"led" function, and GPIO 1 as the "power" GPIO:
+
+	struct gpio_desc *red, *green, *blue, *power;
+
+	red = gpiod_get_index(dev, "led", 0);
+	green = gpiod_get_index(dev, "led", 1);
+	blue = gpiod_get_index(dev, "led", 2);
+
+	power = gpiod_get(dev, "power");
+
+The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
+gpiod_is_active_low(power) will be true).
+
+ACPI
+----
+ACPI does not support function names for GPIOs. Therefore, only the "idx"
+argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
+to a device. The "con_id" argument can still be set for debugging purposes (it
+will appear under error messages as well as debug and sysfs nodes).
+
+Platform Data
+-------------
+Finally, GPIOs can be bound to devices and functions using platform data. Board
+files that desire to do so need to include the following header:
+
+	#include <linux/gpio/driver.h>
+
+GPIOs are mapped by the means of tables of lookups, containing instances of the
+gpiod_lookup structure. Two macros are defined to help declaring such mappings:
+
+	GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
+	GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
+
+where
+
+  - chip_label is the label of the gpiod_chip instance providing the GPIO
+  - chip_hwnum is the hardware number of the GPIO within the chip
+  - dev_id is the identifier of the device that will make use of this GPIO. If
+	NULL, the GPIO will be available to all devices.
+  - con_id is the name of the GPIO function from the device point of view. It
+	can be NULL.
+  - idx is the index of the GPIO within the function.
+  - flags is defined to specify the following properties:
+	* GPIOF_ACTIVE_LOW	- to configure the GPIO as active-low
+	* GPIOF_OPEN_DRAIN	- GPIO pin is open drain type.
+	* GPIOF_OPEN_SOURCE	- GPIO pin is open source type.
+
+In the future, these flags might be extended to support more properties.
+
+Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
+
+A lookup table can then be defined as follows:
+
+	struct gpiod_lookup gpios_table[] = {
+	GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
+	};
+
+And the table can be added by the board code as follows:
+
+	gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+
+The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
+
+	struct gpio_desc *red, *green, *blue, *power;
+
+	red = gpiod_get_index(dev, "led", 0);
+	green = gpiod_get_index(dev, "led", 1);
+	blue = gpiod_get_index(dev, "led", 2);
+
+	power = gpiod_get(dev, "power");
+	gpiod_direction_output(power, 1);
+
+Since the "power" GPIO is mapped as active-low, its actual signal will be 0
+after this code. Contrary to the legacy integer GPIO interface, the active-low
+property is handled during mapping and is thus transparent to GPIO consumers.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
new file mode 100644
index 0000000..07c74a3
--- /dev/null
+++ b/Documentation/gpio/consumer.txt
@@ -0,0 +1,197 @@
+GPIO Descriptor Consumer Interface
+==================================
+
+This document describes the consumer interface of the GPIO framework. Note that
+it describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+
+Guidelines for GPIOs consumers
+==============================
+
+Drivers that can't work without standard GPIO calls should have Kconfig entries
+that depend on GPIOLIB. The functions that allow a driver to obtain and use
+GPIOs are available by including the following file:
+
+	#include <linux/gpio/consumer.h>
+
+All the functions that work with the descriptor-based GPIO interface are
+prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
+other function in the kernel should use these prefixes.
+
+
+Obtaining and Disposing GPIOs
+=============================
+
+With the descriptor-based interface, GPIOs are identified with an opaque,
+non-forgeable handler that must be obtained through a call to one of the
+gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
+device that will use the GPIO and the function the requested GPIO is supposed to
+fulfill:
+
+	struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
+
+If a function is implemented by using several GPIOs together (e.g. a simple LED
+device that displays digits), an additional index argument can be specified:
+
+	struct gpio_desc *gpiod_get_index(struct device *dev,
+					  const char *con_id, unsigned int idx)
+
+Both functions return either a valid GPIO descriptor, or an error code checkable
+with IS_ERR(). They will never return a NULL pointer.
+
+Device-managed variants of these functions are also defined:
+
+	struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
+
+	struct gpio_desc *devm_gpiod_get_index(struct device *dev,
+					       const char *con_id,
+					       unsigned int idx)
+
+A GPIO descriptor can be disposed of using the gpiod_put() function:
+
+	void gpiod_put(struct gpio_desc *desc)
+
+It is strictly forbidden to use a descriptor after calling this function. The
+device-managed variant is, unsurprisingly:
+
+	void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+
+
+Using GPIOs
+===========
+
+Setting Direction
+-----------------
+The first thing a driver must do with a GPIO is setting its direction. This is
+done by invoking one of the gpiod_direction_*() functions:
+
+	int gpiod_direction_input(struct gpio_desc *desc)
+	int gpiod_direction_output(struct gpio_desc *desc, int value)
+
+The return value is zero for success, else a negative errno. It should be
+checked, since the get/set calls don't return errors and since misconfiguration
+is possible. You should normally issue these calls from a task context. However,
+for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
+of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value. This
+helps avoid signal glitching during system startup.
+
+A driver can also query the current direction of a GPIO:
+
+	int gpiod_get_direction(const struct gpio_desc *desc)
+
+This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
+
+Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
+without setting its direction first is illegal and will result in undefined
+behavior!**
+
+
+Spinlock-Safe GPIO Access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions. Those
+don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
+handlers and similar contexts.
+
+Use the following calls to access GPIOs from an atomic context:
+
+	int gpiod_get_value(const struct gpio_desc *desc);
+	void gpiod_set_value(struct gpio_desc *desc, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the value
+of an output pin, the value returned should be what's seen on the pin. That
+won't always match the specified output value, because of issues including
+open-drain signaling and output latencies.
+
+The get/set calls do not return errors because "invalid GPIO" should have been
+reported earlier from gpiod_direction_*(). However, note that not all platforms
+can read the value of output pins; those that can't should always return zero.
+Also, using these calls for GPIOs that can't safely be accessed without sleeping
+(see below) is an error.
+
+
+GPIO Access That May Sleep
+--------------------------
+Some GPIO controllers must be accessed using message based buses like I2C or
+SPI. Commands to read or write those GPIO values require waiting to get to the
+head of a queue to transmit a command and get its response. This requires
+sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs by
+returning nonzero from this call:
+
+	int gpiod_cansleep(const struct gpio_desc *desc)
+
+To access such GPIOs, a different set of accessors is defined:
+
+	int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+	void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+
+Accessing such GPIOs requires a context which may sleep, for example a threaded
+IRQ handler, and those accessors must be used instead of spinlock-safe
+accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work on GPIOs
+that can't be accessed from hardIRQ handlers, these calls act the same as the
+spinlock-safe calls.
+
+
+Active-low State and Raw GPIO Values
+------------------------------------
+Device drivers like to manage the logical state of a GPIO, i.e. the value their
+device will actually receive, no matter what lies between it and the GPIO line.
+In some cases, it might make sense to control the actual GPIO line value. The
+following set of calls ignore the active-low property of a GPIO and work on the
+raw line value:
+
+	int gpiod_get_raw_value(const struct gpio_desc *desc)
+	void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+	int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+	void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+
+The active-low state of a GPIO can also be queried using the following call:
+
+	int gpiod_is_active_low(const struct gpio_desc *desc)
+
+Note that these functions should only be used with great moderation ; a driver
+should not have to care about the physical line level.
+
+GPIOs mapped to IRQs
+--------------------
+GPIO lines can quite often be used as IRQs. You can get the IRQ number
+corresponding to a given GPIO using the following call:
+
+	int gpiod_to_irq(const struct gpio_desc *desc)
+
+It will return an IRQ number, or an negative errno code if the mapping can't be
+done (most likely because that particular GPIO cannot be used as IRQ). It is an
+unchecked error to use a GPIO that wasn't set up as an input using
+gpiod_direction_input(), or to use an IRQ number that didn't originally come
+from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
+
+Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
+free_irq(). They will often be stored into IRQ resources for platform devices,
+by the board-specific initialization code. Note that IRQ trigger options are
+part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
+capabilities.
+
+
+Interacting With the Legacy GPIO Subsystem
+==========================================
+Many kernel subsystems still handle GPIOs using the legacy integer-based
+interface. Although it is strongly encouraged to upgrade them to the safer
+descriptor-based API, the following two functions allow you to convert a GPIO
+descriptor into the GPIO integer namespace and vice-versa:
+
+	int desc_to_gpio(const struct gpio_desc *desc)
+	struct gpio_desc *gpio_to_desc(unsigned gpio)
+
+The GPIO number returned by desc_to_gpio() can be safely used as long as the
+GPIO descriptor has not been freed. All the same, a GPIO number passed to
+gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
+descriptor is only possible after the GPIO number has been released.
+
+Freeing a GPIO obtained by one API with the other API is forbidden and an
+unchecked error.
diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt
new file mode 100644
index 0000000..9da0bfa
--- /dev/null
+++ b/Documentation/gpio/driver.txt
@@ -0,0 +1,75 @@
+GPIO Descriptor Driver Interface
+================================
+
+This document serves as a guide for GPIO chip drivers writers. Note that it
+describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+Each GPIO controller driver needs to include the following header, which defines
+the structures used to define a GPIO driver:
+
+	#include <linux/gpio/driver.h>
+
+
+Internal Representation of GPIOs
+================================
+
+Inside a GPIO driver, individual GPIOs are identified by their hardware number,
+which is a unique number between 0 and n, n being the number of GPIOs managed by
+the chip. This number is purely internal: the hardware number of a particular
+GPIO descriptor is never made visible outside of the driver.
+
+On top of this internal number, each GPIO also need to have a global number in
+the integer GPIO namespace so that it can be used with the legacy GPIO
+interface. Each chip must thus have a "base" number (which can be automatically
+assigned), and for each GPIO the global number will be (base + hardware number).
+Although the integer representation is considered deprecated, it still has many
+users and thus needs to be maintained.
+
+So for example one platform could use numbers 32-159 for GPIOs, with a
+controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
+numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
+controller, and on one particular board 80-95 with an FPGA. The numbers need not
+be contiguous; either of those platforms could also use numbers 2000-2063 to
+identify GPIOs in a bank of I2C GPIO expanders.
+
+
+Controller Drivers: gpio_chip
+=============================
+
+In the gpiolib framework each GPIO controller is packaged as a "struct
+gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
+common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - method to return the IRQ number associated to a given GPIO
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - optional base number (will be automatically assigned if omitted)
+ - label for diagnostics and GPIOs mapping using platform data
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
+use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state not
+exposed by the GPIO interfaces, such as addressing, power management, and more.
+Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns either
+NULL or the label associated with that GPIO when it was requested.
+
+Locking IRQ usage
+-----------------
+Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
+to mark the GPIO as being used as an IRQ:
+
+	int gpiod_lock_as_irq(struct gpio_desc *desc)
+
+This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
+is released:
+
+	void gpiod_unlock_as_irq(struct gpio_desc *desc)
diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt
similarity index 100%
rename from Documentation/gpio.txt
rename to Documentation/gpio/gpio-legacy.txt
diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt
new file mode 100644
index 0000000..cd9b356
--- /dev/null
+++ b/Documentation/gpio/gpio.txt
@@ -0,0 +1,119 @@
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+Due to the history of GPIO interfaces in the kernel, there are two different
+ways to obtain and use GPIOs:
+
+  - The descriptor-based interface is the preferred way to manipulate GPIOs,
+and is described by all the files in this directory excepted gpio-legacy.txt.
+  - The legacy integer-based interface which is considered deprecated (but still
+usable for compatibility reasons) is documented in gpio-legacy.txt.
+
+The remainder of this document applies to the new descriptor-based interface.
+gpio-legacy.txt contains the same information applied to the legacy
+integer-based interface.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+  - Output values are writable (high=1, low=0). Some chips also have
+    options about how that value is driven, so that for example only one
+    value might be driven, supporting "wire-OR" and similar schemes for the
+    other value (notably, "open drain" signaling).
+
+  - Input values are likewise readable (1, 0). Some chips support readback
+    of pins configured as "output", which is very useful in such "wire-OR"
+    cases (to support bidirectional signaling). GPIO controllers may have
+    input de-glitch/debounce logic, sometimes with software controls.
+
+  - Inputs can often be used as IRQ signals, often edge triggered but
+    sometimes level triggered. Such IRQs may be configurable as system
+    wakeup events, to wake the system from a low power state.
+
+  - Usually a GPIO will be configurable as either input or output, as needed
+    by different product boards; single direction ones exist too.
+
+  - Most GPIOs can be accessed while holding spinlocks, but those accessed
+    through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ LOW:	gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
+	the pullup.
+
+ HIGH:	gpiod_direction_input(gpio) ... this turns off the output, so the pullup
+	(or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched:  a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
new file mode 100644
index 0000000..c2c3a97
--- /dev/null
+++ b/Documentation/gpio/sysfs.txt
@@ -0,0 +1,155 @@
+GPIO Sysfs Interface for Userspace
+==================================
+
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks:  "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+   -	Control interfaces used to get userspace control over GPIOs;
+
+   -	GPIOs themselves; and
+
+   -	GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+    /sys/class/gpio/
+
+    	"export" ... Userspace may ask the kernel to export control of
+		a GPIO to userspace by writing its number to this file.
+
+		Example:  "echo 19 > export" will create a "gpio19" node
+		for GPIO #19, if that's not requested by kernel code.
+
+    	"unexport" ... Reverses the effect of exporting to userspace.
+
+		Example:  "echo 19 > unexport" will remove a "gpio19"
+		node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+    /sys/class/gpio/gpioN/
+
+	"direction" ... reads as either "in" or "out". This value may
+		normally be written. Writing as "out" defaults to
+		initializing the value as low. To ensure glitch free
+		operation, values "low" and "high" may be written to
+		configure the GPIO as an output with that initial value.
+
+		Note that this attribute *will not exist* if the kernel
+		doesn't support changing the direction of a GPIO, or
+		it was exported by kernel code that didn't explicitly
+		allow userspace to reconfigure this GPIO's direction.
+
+	"value" ... reads as either 0 (low) or 1 (high). If the GPIO
+		is configured as an output, this value may be written;
+		any nonzero value is treated as high.
+
+		If the pin can be configured as interrupt-generating interrupt
+		and if it has been configured to generate interrupts (see the
+		description of "edge"), you can poll(2) on that file and
+		poll(2) will return whenever the interrupt was triggered. If
+		you use poll(2), set the events POLLPRI and POLLERR. If you
+		use select(2), set the file descriptor in exceptfds. After
+		poll(2) returns, either lseek(2) to the beginning of the sysfs
+		file and read the new value or close the file and re-open it
+		to read the value.
+
+	"edge" ... reads as either "none", "rising", "falling", or
+		"both". Write these strings to select the signal edge(s)
+		that will make poll(2) on the "value" file return.
+
+		This file exists only if the pin can be configured as an
+		interrupt generating input pin.
+
+	"active_low" ... reads as either 0 (false) or 1 (true). Write
+		any nonzero value to invert the value attribute both
+		for reading and writing. Existing and subsequent
+		poll(2) support configuration via the edge attribute
+		for "rising" and "falling" edges will follow this
+		setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+    /sys/class/gpio/gpiochipN/
+
+    	"base" ... same as N, the first GPIO managed by this chip
+
+    	"label" ... provided for diagnostics (not always unique)
+
+    	"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+	/* export the GPIO to userspace */
+	int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+
+	/* reverse gpio_export() */
+	void gpiod_unexport(struct gpio_desc *desc);
+
+	/* create a sysfs link to an exported GPIO node */
+	int gpiod_export_link(struct device *dev, const char *name,
+		      struct gpio_desc *desc);
+
+	/* change the polarity of a GPIO node in sysfs */
+	int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpiod_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpiod_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. Polarity change can be done both
+before and after gpiod_export(), and previously enabled poll(2) support for
+either rising or falling edge will be reconfigured to follow this setting.
diff --git a/MAINTAINERS b/MAINTAINERS
index 8285ed4..f216db8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2142,6 +2142,11 @@
 S:	Maintained
 F:	drivers/usb/chipidea/
 
+CHROME HARDWARE PLATFORM SUPPORT
+M:	Olof Johansson <olof@lixom.net>
+S:	Maintained
+F:	drivers/platform/chrome/
+
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
 M:	Sujith Sankar <ssujith@cisco.com>
diff --git a/Makefile b/Makefile
index c0c2d58..2c88e44 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1e12aef..aa537ed 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -85,6 +85,8 @@
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -93,6 +95,8 @@
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index dc259e8b..9b186ac 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -27,6 +27,13 @@
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
+
+		max77686_irq: max77686-irq {
+			samsung,pins = "gpx3-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	i2c@12C60000 {
@@ -35,6 +42,11 @@
 
 		max77686@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			wakeup-source;
 			reg = <0x09>;
 
 			voltage-regulators {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 59154dc..fb28b2e 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -161,7 +161,7 @@
 					clocks = <&clks 197>, <&clks 3>,
 						 <&clks 197>, <&clks 107>,
 						 <&clks 0>,   <&clks 118>,
-						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>,  <&clks 139>,
 						 <&clks 0>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index b0ee342..68221fa 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -13,7 +13,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	8250@3,0 {
+	uart@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 0x100>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index a2bfcde..d0c5b37 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
 #include "skeleton.dtsi"
@@ -21,6 +22,8 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
 	};
 
 	cpus {
@@ -53,6 +56,28 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -63,6 +88,7 @@
 
 		sdma: dma-controller@48056000 {
 			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			ti,hwmods = "dma";
 			reg = <0x48056000 0x1000>;
 			interrupts = <12>,
 				     <13>,
@@ -73,21 +99,91 @@
 			#dma-requests = <64>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: mcspi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: mcspi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <36>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@4806e000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index c8f9c55..60c605d 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -114,6 +114,15 @@
 			dma-names = "tx", "rx";
 		};
 
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;
@@ -121,5 +130,19 @@
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c535a5a..d624345 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -175,6 +175,25 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;
@@ -182,5 +201,35 @@
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		mcspi3: mcspi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f25f3e..adcef40 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -19,11 +19,11 @@
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5)	 += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f7644fe..e30ef67 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -299,7 +299,6 @@
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 extern void omap_reserve(void);
 
 struct omap_hwmod;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a4e536b..58347bb 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -32,7 +32,6 @@
 
 #include "soc.h"
 #include "iomap.h"
-#include "mux.h"
 #include "control.h"
 #include "display.h"
 #include "prm.h"
@@ -102,90 +101,13 @@
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
-static void __init omap4_tpd12s015_mux_pads(void)
-{
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
-	u32 reg;
-	u16 control_i2c_1;
-
-	/*
-	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
-	 * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
-	 * internal pull up resistor.
-	 */
-	if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
-		control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
-		reg = omap4_ctrl_pad_readl(control_i2c_1);
-		reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
-			OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
-			omap4_ctrl_pad_writel(reg, control_i2c_1);
-	}
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
-	u32 enable_mask, enable_shift;
-	u32 pipd_mask, pipd_shift;
-	u32 reg;
-
-	if (dsi_id == 0) {
-		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI1_PIPD_MASK;
-		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
-	} else if (dsi_id == 1) {
-		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI2_PIPD_MASK;
-		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
-	} else {
-		return -ENODEV;
-	}
-
-	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	reg &= ~enable_mask;
-	reg &= ~pipd_mask;
-
-	reg |= (lanes << enable_shift) & enable_mask;
-	reg |= (lanes << pipd_shift) & pipd_mask;
-
-	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
-	if (cpu_is_omap44xx()) {
-		omap4_hdmi_mux_pads(flags);
-		omap4_tpd12s015_mux_pads();
-	}
-
-	return 0;
-}
-
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
-	if (cpu_is_omap44xx())
-		return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
 	return 0;
 }
 
 static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
-	if (cpu_is_omap44xx())
-		omap4_dsi_mux_pads(dsi_id, 0);
 }
 
 static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 81de562..d24926e 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1502,6 +1502,22 @@
 	}
 
 	/*
+	 * For some GPMC devices we still need to rely on the bootloader
+	 * timings because the devices can be connected via FPGA. So far
+	 * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+	 * REVISIT: Add timing support from slls644g.pdf and from the
+	 * lan91c96 manual.
+	 */
+	if (of_device_is_compatible(child, "ns16550a") ||
+	    of_device_is_compatible(child, "smsc,lan91c94") ||
+	    of_device_is_compatible(child, "smsc,lan91c111")) {
+		dev_warn(&pdev->dev,
+			 "%s using bootloader timings on CS%d\n",
+			 child->name, cs);
+		goto no_timings;
+	}
+
+	/*
 	 * FIXME: gpmc_cs_request() will map the CS to an arbitary
 	 * location in the gpmc address space. When booting with
 	 * device-tree we want the NOR flash to be mapped to the
@@ -1529,6 +1545,7 @@
 	gpmc_read_timings_dt(child, &gpmc_t);
 	gpmc_cs_set_timings(cs, &gpmc_t);
 
+no_timings:
 	if (of_platform_device_create(child, NULL, &pdev->dev))
 		return 0;
 
@@ -1541,42 +1558,6 @@
 	return ret;
 }
 
-/*
- * REVISIT: Add timing support from slls644g.pdf
- */
-static int gpmc_probe_8250(struct platform_device *pdev,
-				struct device_node *child)
-{
-	struct resource res;
-	unsigned long base;
-	int ret, cs;
-
-	if (of_property_read_u32(child, "reg", &cs) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
-		return -ENODEV;
-	}
-
-	if (of_address_to_resource(child, 0, &res) < 0) {
-		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
-			child->full_name);
-		return -ENODEV;
-	}
-
-	ret = gpmc_cs_request(cs, resource_size(&res), &base);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
-		return ret;
-	}
-
-	if (of_platform_device_create(child, NULL, &pdev->dev))
-		return 0;
-
-	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
-
-	return -ENODEV;
-}
-
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1618,10 +1599,9 @@
 		else if (of_node_cmp(child->name, "onenand") == 0)
 			ret = gpmc_probe_onenand_child(pdev, child);
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
-			 of_node_cmp(child->name, "nor") == 0)
+			 of_node_cmp(child->name, "nor") == 0 ||
+			 of_node_cmp(child->name, "uart") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
-		else if (of_node_cmp(child->name, "8250") == 0)
-			ret = gpmc_probe_8250(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
 			 __func__, child->full_name))
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 8cc7d33..3e97c6c 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -76,6 +76,13 @@
 { }
 #endif
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 void set_cntfreq(void);
+#else
+static inline void set_cntfreq(void)
+{
+}
+#endif
+
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5791143..b39efd4 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -35,7 +35,6 @@
 #include "iomap.h"
 #include "common.h"
 #include "mmc.h"
-#include "hsmmc.h"
 #include "prminst44xx.h"
 #include "prcm_mpu44xx.h"
 #include "omap4-sar-layout.h"
@@ -284,59 +283,3 @@
 	omap_wakeupgen_init();
 	irqchip_init();
 }
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, irq);
-			return irq;
-		}
-		pdata->slots[0].card_detect_irq = irq;
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed %s\n", __func__);
-		return;
-	}
-	pdata = dev->platform_data;
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++) {
-		/* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
-		if (!c->pdev)
-			continue;
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-	}
-
-	return 0;
-}
-#else
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	return 0;
-}
-#endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 93b80e5..1f3770a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -120,7 +120,7 @@
 		 * will hang the system.
 		 */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-		ret = _omap_save_secure_sram((u32 *)
+		ret = _omap_save_secure_sram((u32 *)(unsigned long)
 				__pa(omap3_secure_ram_storage));
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7a97606..8d95aa5 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -43,7 +43,7 @@
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX)
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
 void omap44xx_prm_reconfigure_io_chain(void);
 #else
 static inline void omap44xx_prm_reconfigure_io_chain(void)
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index d4639c5..9a4e910 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -209,13 +209,3 @@
 		tegra_sku_id, tegra_cpu_process_id,
 		tegra_core_process_id);
 }
-
-unsigned long long tegra_chip_uid(void)
-{
-	unsigned long long lo, hi;
-
-	lo = tegra_fuse_readl(FUSE_UID_LOW);
-	hi = tegra_fuse_readl(FUSE_UID_HIGH);
-	return (hi << 32ull) | lo;
-}
-EXPORT_SYMBOL(tegra_chip_uid);
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 033d34d..c26ef5b 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -53,6 +53,11 @@
 #define A15_BX_ADDR0		0x68
 #define A7_BX_ADDR0		0x78
 
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT		0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu)	(1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu)	(1 << (3 + (cpu)))
+
 /* SPC system config interface registers */
 #define SYSCFG_WDATA		0x70
 #define SYSCFG_RDATA		0x74
@@ -213,6 +218,41 @@
 	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
 }
 
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+	return cluster_is_a15(cluster) ?
+		  STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+		: STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+	int ret;
+	u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+	if (cluster >= MAX_CLUSTERS)
+		return 1;
+
+	ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+	pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+		 __func__, STANDBYWFI_STAT, ret, mask);
+
+	return ret & mask;
+}
+
 static int ve_spc_get_performance(int cluster, u32 *freq)
 {
 	struct ve_spc_opp *opps = info->opps[cluster];
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
index dbd44c3..793d065 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-vexpress/spc.h
@@ -20,5 +20,6 @@
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
 void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
 void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
 
 #endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 05a364c50..29e7785 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -32,11 +33,17 @@
 #include "spc.h"
 
 /* SCC conf registers */
+#define RESET_CTRL		0x018
+#define RESET_A15_NCORERESET(cpu)	(1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu)	(1 << (16 + (cpu)))
+
 #define A15_CONF		0x400
 #define A7_CONF			0x500
 #define SYS_INFO		0x700
 #define SPC_BASE		0xb00
 
+static void __iomem *scc;
+
 /*
  * We can't use regular spinlocks. In the switcher case, it is possible
  * for an outbound CPU to call power_down() after its inbound counterpart
@@ -190,6 +197,55 @@
 	tc2_pm_down(0);
 }
 
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+	u32 mask = cluster ?
+		  RESET_A7_NCORERESET(cpu)
+		: RESET_A15_NCORERESET(cpu);
+
+	return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+	unsigned tries;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+		/*
+		 * Only examine the hardware state if the target CPU has
+		 * caught up at least as far as tc2_pm_down():
+		 */
+		if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+			pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+				 __func__, cpu, cluster,
+				 readl_relaxed(scc + RESET_CTRL));
+
+			/*
+			 * We need the CPU to reach WFI, but the power
+			 * controller may put the cluster in reset and
+			 * power it off as soon as that happens, before
+			 * we have a chance to see STANDBYWFI.
+			 *
+			 * So we need to check for both conditions:
+			 */
+			if (tc2_core_in_reset(cpu, cluster) ||
+			    ve_spc_cpu_in_wfi(cpu, cluster))
+				return 0; /* success: the CPU is halted */
+		}
+
+		/* Otherwise, wait and retry: */
+		msleep(POLL_MSEC);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
 static void tc2_pm_suspend(u64 residency)
 {
 	unsigned int mpidr, cpu, cluster;
@@ -232,10 +288,11 @@
 }
 
 static const struct mcpm_platform_ops tc2_pm_power_ops = {
-	.power_up	= tc2_pm_power_up,
-	.power_down	= tc2_pm_power_down,
-	.suspend	= tc2_pm_suspend,
-	.powered_up	= tc2_pm_powered_up,
+	.power_up		= tc2_pm_power_up,
+	.power_down		= tc2_pm_power_down,
+	.power_down_finish	= tc2_pm_power_down_finish,
+	.suspend		= tc2_pm_suspend,
+	.powered_up		= tc2_pm_powered_up,
 };
 
 static bool __init tc2_pm_usage_count_init(void)
@@ -269,7 +326,6 @@
 static int __init tc2_pm_init(void)
 {
 	int ret, irq;
-	void __iomem *scc;
 	u32 a15_cluster_id, a7_cluster_id, sys_info;
 	struct device_node *np;
 
diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts
index 84fcc50..519c4b2 100644
--- a/arch/arm64/boot/dts/foundation-v8.dts
+++ b/arch/arm64/boot/dts/foundation-v8.dts
@@ -6,6 +6,8 @@
 
 /dts-v1/;
 
+/memreserve/ 0x80000000 0x00010000;
+
 / {
 	model = "Foundation-v8A";
 	compatible = "arm,foundation-aarch64", "arm,vexpress";
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index aa11943..b2fcfbc 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -56,6 +56,9 @@
 #define local_fiq_enable()	asm("msr	daifclr, #1" : : : "memory")
 #define local_fiq_disable()	asm("msr	daifset, #1" : : : "memory")
 
+#define local_async_enable()	asm("msr	daifclr, #4" : : : "memory")
+#define local_async_disable()	asm("msr	daifset, #4" : : : "memory")
+
 /*
  * Save the current interrupt enable state.
  */
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 17bd3af..7f2b60a 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -25,10 +25,11 @@
  * Software defined PTE bits definition.
  */
 #define PTE_VALID		(_AT(pteval_t, 1) << 0)
-#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 2)	/* only when !PTE_VALID */
-#define PTE_FILE		(_AT(pteval_t, 1) << 3)	/* only when !pte_present() */
+#define PTE_FILE		(_AT(pteval_t, 1) << 2)	/* only when !pte_present() */
 #define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
 #define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
+				/* bit 57 for PMD_SECT_SPLITTING */
+#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
 
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
@@ -254,7 +255,7 @@
 #define pgprot_noncached(prot) \
 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE))
 #define pgprot_writecombine(prot) \
-	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE))
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
 #define __HAVE_PHYS_MEM_ACCESS_PROT
@@ -357,18 +358,20 @@
 
 /*
  * Encode and decode a swap entry:
- *	bits 0, 2:	present (must both be zero)
- *	bit  3:		PTE_FILE
- *	bits 4-8:	swap type
- *	bits 9-63:	swap offset
+ *	bits 0-1:	present (must be zero)
+ *	bit  2:		PTE_FILE
+ *	bits 3-8:	swap type
+ *	bits 9-57:	swap offset
  */
-#define __SWP_TYPE_SHIFT	4
+#define __SWP_TYPE_SHIFT	3
 #define __SWP_TYPE_BITS		6
+#define __SWP_OFFSET_BITS	49
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_MASK	((1UL << __SWP_OFFSET_BITS) - 1)
 
 #define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
-#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_offset(x)		(((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK)
 #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
 
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
@@ -382,15 +385,15 @@
 
 /*
  * Encode and decode a file entry:
- *	bits 0, 2:	present (must both be zero)
- *	bit  3:		PTE_FILE
- *	bits 4-63:	file offset / PAGE_SIZE
+ *	bits 0-1:	present (must be zero)
+ *	bit  2:		PTE_FILE
+ *	bits 3-57:	file offset / PAGE_SIZE
  */
 #define pte_file(pte)		(pte_val(pte) & PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 4)
-#define pgoff_to_pte(x)		__pte(((x) << 4) | PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | PTE_FILE)
 
-#define PTE_FILE_MAX_BITS	60
+#define PTE_FILE_MAX_BITS	55
 
 extern int kern_addr_valid(unsigned long addr);
 
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 6a0a9b1..4ae6857 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -248,7 +248,8 @@
 int aarch32_break_handler(struct pt_regs *regs)
 {
 	siginfo_t info;
-	unsigned int instr;
+	u32 arm_instr;
+	u16 thumb_instr;
 	bool bp = false;
 	void __user *pc = (void __user *)instruction_pointer(regs);
 
@@ -257,18 +258,21 @@
 
 	if (compat_thumb_mode(regs)) {
 		/* get 16-bit Thumb instruction */
-		get_user(instr, (u16 __user *)pc);
-		if (instr == AARCH32_BREAK_THUMB2_LO) {
+		get_user(thumb_instr, (u16 __user *)pc);
+		thumb_instr = le16_to_cpu(thumb_instr);
+		if (thumb_instr == AARCH32_BREAK_THUMB2_LO) {
 			/* get second half of 32-bit Thumb-2 instruction */
-			get_user(instr, (u16 __user *)(pc + 2));
-			bp = instr == AARCH32_BREAK_THUMB2_HI;
+			get_user(thumb_instr, (u16 __user *)(pc + 2));
+			thumb_instr = le16_to_cpu(thumb_instr);
+			bp = thumb_instr == AARCH32_BREAK_THUMB2_HI;
 		} else {
-			bp = instr == AARCH32_BREAK_THUMB;
+			bp = thumb_instr == AARCH32_BREAK_THUMB;
 		}
 	} else {
 		/* 32-bit ARM instruction */
-		get_user(instr, (u32 __user *)pc);
-		bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM;
+		get_user(arm_instr, (u32 __user *)pc);
+		arm_instr = le32_to_cpu(arm_instr);
+		bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM;
 	}
 
 	if (!bp)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index e116614..4d2c6f3 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -309,15 +309,12 @@
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
+
+	irq_handler
+
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
-	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	w0, w24, #1			// increment it
-	str	w0, [tsk, #TI_PREEMPT]
-#endif
-	irq_handler
-#ifdef CONFIG_PREEMPT
-	str	w24, [tsk, #TI_PREEMPT]		// restore preempt count
+	ldr	w24, [tsk, #TI_PREEMPT]		// restore preempt count
 	cbnz	w24, 1f				// preempt count != 0
 	ldr	x0, [tsk, #TI_FLAGS]		// get flags
 	tbz	x0, #TIF_NEED_RESCHED, 1f	// needs rescheduling?
@@ -507,22 +504,10 @@
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
-	get_thread_info tsk
-#ifdef CONFIG_PREEMPT
-	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	w23, w24, #1			// increment it
-	str	w23, [tsk, #TI_PREEMPT]
-#endif
+
 	irq_handler
-#ifdef CONFIG_PREEMPT
-	ldr	w0, [tsk, #TI_PREEMPT]
-	str	w24, [tsk, #TI_PREEMPT]
-	cmp	w0, w23
-	b.eq	1f
-	mov	x1, #0
-	str	x1, [x1]			// BUG
-1:
-#endif
+	get_thread_info tsk
+
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
 #endif
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index fecdbf7..6777a21 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -636,28 +636,27 @@
 
 	for (i = 0; i < num_regs; ++i) {
 		unsigned int idx = start + i;
-		void *reg;
+		compat_ulong_t reg;
 
 		switch (idx) {
 		case 15:
-			reg = (void *)&task_pt_regs(target)->pc;
+			reg = task_pt_regs(target)->pc;
 			break;
 		case 16:
-			reg = (void *)&task_pt_regs(target)->pstate;
+			reg = task_pt_regs(target)->pstate;
 			break;
 		case 17:
-			reg = (void *)&task_pt_regs(target)->orig_x0;
+			reg = task_pt_regs(target)->orig_x0;
 			break;
 		default:
-			reg = (void *)&task_pt_regs(target)->regs[idx];
+			reg = task_pt_regs(target)->regs[idx];
 		}
 
-		ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t));
-
+		ret = copy_to_user(ubuf, &reg, sizeof(reg));
 		if (ret)
 			break;
-		else
-			ubuf += sizeof(compat_ulong_t);
+
+		ubuf += sizeof(reg);
 	}
 
 	return ret;
@@ -685,28 +684,28 @@
 
 	for (i = 0; i < num_regs; ++i) {
 		unsigned int idx = start + i;
-		void *reg;
+		compat_ulong_t reg;
+
+		ret = copy_from_user(&reg, ubuf, sizeof(reg));
+		if (ret)
+			return ret;
+
+		ubuf += sizeof(reg);
 
 		switch (idx) {
 		case 15:
-			reg = (void *)&newregs.pc;
+			newregs.pc = reg;
 			break;
 		case 16:
-			reg = (void *)&newregs.pstate;
+			newregs.pstate = reg;
 			break;
 		case 17:
-			reg = (void *)&newregs.orig_x0;
+			newregs.orig_x0 = reg;
 			break;
 		default:
-			reg = (void *)&newregs.regs[idx];
+			newregs.regs[idx] = reg;
 		}
 
-		ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t));
-
-		if (ret)
-			goto out;
-		else
-			ubuf += sizeof(compat_ulong_t);
 	}
 
 	if (valid_user_regs(&newregs.user_regs))
@@ -714,7 +713,6 @@
 	else
 		ret = -EINVAL;
 
-out:
 	return ret;
 }
 
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 0bc5e4c..bd9bbd0 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -205,6 +205,11 @@
 
 void __init setup_arch(char **cmdline_p)
 {
+	/*
+	 * Unmask asynchronous aborts early to catch possible system errors.
+	 */
+	local_async_enable();
+
 	setup_processor();
 
 	setup_machine_fdt(__fdt_pointer);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index a5aeefa..a0c2ca6 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -160,6 +160,7 @@
 
 	local_irq_enable();
 	local_fiq_enable();
+	local_async_enable();
 
 	/*
 	 * OK, it's off to the idle thread for us
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 8a24636..0f4344e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -75,8 +75,10 @@
 GNUTARGET	:= powerpcle
 MULTIPLEWORD	:= -mno-multiple
 else
+ifeq ($(call cc-option-yn,-mbig-endian),y)
 override CC	+= -mbig-endian
 override AS	+= -mbig-endian
+endif
 override LD	+= -EB
 LDEMULATION	:= ppc
 GNUTARGET	:= powerpc
@@ -128,7 +130,12 @@
 CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
 CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
 E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
 CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
 CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
 
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index cc00f4d..c409cba 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -637,14 +637,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index 53c1c6a..04cb410 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -547,14 +547,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index 2152259..73f8620 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -583,14 +583,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index 11dbda1..cd0ea2b 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -545,14 +545,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 5143228..6636b1d 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -71,18 +71,32 @@
 	add	r4,r4,r5
 	addi	r4,r4,-1
 	divw	r4,r4,r5	/* BUS ticks */
+#ifdef CONFIG_8xx
+1:	mftbu	r5
+	mftb	r6
+	mftbu	r7
+#else
 1:	mfspr	r5, SPRN_TBRU
 	mfspr	r6, SPRN_TBRL
 	mfspr	r7, SPRN_TBRU
+#endif
 	cmpw	0,r5,r7
 	bne	1b		/* Get [synced] base time */
 	addc	r9,r6,r4	/* Compute end time */
 	addze	r8,r5
+#ifdef CONFIG_8xx
+2:	mftbu	r5
+#else
 2:	mfspr	r5, SPRN_TBRU
+#endif
 	cmpw	0,r5,r8
 	blt	2b
 	bgt	3f
+#ifdef CONFIG_8xx
+	mftb	r6
+#else
 	mfspr	r6, SPRN_TBRL
+#endif
 	cmpw	0,r6,r9
 	blt	2b
 3:	blr
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 16cb92d..6940128 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -16,6 +16,7 @@
 	unsigned long phys;
 	unsigned long virt_addr;
 };
+extern struct vmemmap_backing *vmemmap_list;
 
 /*
  * Functions that deal with pagetables that could be at any level of
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 3c1acc3..f595b98 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -366,6 +366,8 @@
 	cmpwi dest,0;			\
 	beq-  90b;			\
 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#elif defined(CONFIG_8xx)
+#define MFTB(dest)			mftb dest
 #else
 #define MFTB(dest)			mfspr dest, SPRN_TBRL
 #endif
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 5c45787..fa8388e 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1174,12 +1174,19 @@
 
 #else /* __powerpc64__ */
 
+#if defined(CONFIG_8xx)
+#define mftbl()		({unsigned long rval;	\
+			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu()		({unsigned long rval;	\
+			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#else
 #define mftbl()		({unsigned long rval;	\
 			asm volatile("mfspr %0, %1" : "=r" (rval) : \
 				"i" (SPRN_TBRL)); rval;})
 #define mftbu()		({unsigned long rval;	\
 			asm volatile("mfspr %0, %1" : "=r" (rval) : \
 				"i" (SPRN_TBRU)); rval;})
+#endif
 #endif /* !__powerpc64__ */
 
 #define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
index 18908ca..2cf846e 100644
--- a/arch/powerpc/include/asm/timex.h
+++ b/arch/powerpc/include/asm/timex.h
@@ -29,7 +29,11 @@
 	ret = 0;
 
 	__asm__ __volatile__(
+#ifdef CONFIG_8xx
+		"97:	mftb %0\n"
+#else
 		"97:	mfspr %0, %2\n"
+#endif
 		"99:\n"
 		".section __ftr_fixup,\"a\"\n"
 		".align 2\n"
@@ -41,7 +45,11 @@
 		"	.long 0\n"
 		"	.long 0\n"
 		".previous"
+#ifdef CONFIG_8xx
+		: "=r" (ret) : "i" (CPU_FTR_601));
+#else
 		: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
+#endif
 	return ret;
 #endif
 }
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index e1ec57e..88a7fb4 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -18,6 +18,7 @@
 #include <linux/ftrace.h>
 
 #include <asm/machdep.h>
+#include <asm/pgalloc.h>
 #include <asm/prom.h>
 #include <asm/sections.h>
 
@@ -75,6 +76,17 @@
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 	VMCOREINFO_SYMBOL(contig_page_data);
 #endif
+#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+	VMCOREINFO_SYMBOL(vmemmap_list);
+	VMCOREINFO_SYMBOL(mmu_vmemmap_psize);
+	VMCOREINFO_SYMBOL(mmu_psize_defs);
+	VMCOREINFO_STRUCT_SIZE(vmemmap_backing);
+	VMCOREINFO_OFFSET(vmemmap_backing, list);
+	VMCOREINFO_OFFSET(vmemmap_backing, phys);
+	VMCOREINFO_OFFSET(vmemmap_backing, virt_addr);
+	VMCOREINFO_STRUCT_SIZE(mmu_psize_def);
+	VMCOREINFO_OFFSET(mmu_psize_def, shift);
+#endif
 }
 
 /*
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index fd82c28..28b898e 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -210,7 +210,7 @@
 	printk(KERN_WARNING "--------%s---------\n", label);
 	printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
 	list_for_each_entry(tmp_part, &nvram_partitions, partition) {
-		printk(KERN_WARNING "%4d    \t%02x\t%02x\t%d\t%12s\n",
+		printk(KERN_WARNING "%4d    \t%02x\t%02x\t%d\t%12.12s\n",
 		       tmp_part->index, tmp_part->header.signature,
 		       tmp_part->header.checksum, tmp_part->header.length,
 		       tmp_part->header.name);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 1844298..68027bf 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -445,6 +445,12 @@
 #endif /* CONFIG_ALTIVEC */
 	if (copy_fpr_to_user(&frame->mc_fregs, current))
 		return 1;
+
+	/*
+	 * Clear the MSR VSX bit to indicate there is no valid state attached
+	 * to this context, except in the specific case below where we set it.
+	 */
+	msr &= ~MSR_VSX;
 #ifdef CONFIG_VSX
 	/*
 	 * Copy VSR 0-31 upper half from thread_struct to local
@@ -457,15 +463,7 @@
 		if (copy_vsx_to_user(&frame->mc_vsregs, current))
 			return 1;
 		msr |= MSR_VSX;
-	} else if (!ctx_has_vsx_region)
-		/*
-		 * With a small context structure we can't hold the VSX
-		 * registers, hence clear the MSR value to indicate the state
-		 * was not saved.
-		 */
-		msr &= ~MSR_VSX;
-
-
+	}
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* save spe registers */
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index e66f67b..4299104 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -122,6 +122,12 @@
 	flush_fp_to_thread(current);
 	/* copy fpr regs and fpscr */
 	err |= copy_fpr_to_user(&sc->fp_regs, current);
+
+	/*
+	 * Clear the MSR VSX bit to indicate there is no valid state attached
+	 * to this context, except in the specific case below where we set it.
+	 */
+	msr &= ~MSR_VSX;
 #ifdef CONFIG_VSX
 	/*
 	 * Copy VSX low doubleword to local buffer for formatting,
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 6b1f2a6..6b2b696 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -232,9 +232,15 @@
 	lwz	r6,(CFG_TB_ORIG_STAMP+4)(r9)
 
 	/* Get a stable TB value */
+#ifdef CONFIG_8xx
+2:	mftbu	r3
+	mftbl	r4
+	mftbu	r0
+#else
 2:	mfspr	r3, SPRN_TBRU
 	mfspr	r4, SPRN_TBRL
 	mfspr	r0, SPRN_TBRU
+#endif
 	cmplw	cr0,r3,r0
 	bne-	2b
 
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 3bc7006..74551b5 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -117,6 +117,5 @@
 	struct hstate *hstate = hstate_file(vma->vm_file);
 	unsigned long tsize = huge_page_shift(hstate) - 10;
 
-	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
-
+	__flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0);
 }
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 41cd68d..358d743 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -305,7 +305,7 @@
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
 #ifdef CONFIG_HUGETLB_PAGE
-	if (is_vm_hugetlb_page(vma))
+	if (vma && is_vm_hugetlb_page(vma))
 		flush_hugetlb_page(vma, vmaddr);
 #endif
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 132f872..bca2465 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -404,13 +404,27 @@
 
 endmenu
 
-config CPU_LITTLE_ENDIAN
-	bool "Build little endian kernel"
-	default n
+choice
+	prompt "Endianness selection"
+	default CPU_BIG_ENDIAN
 	help
 	  This option selects whether a big endian or little endian kernel will
 	  be built.
 
+config CPU_BIG_ENDIAN
+	bool "Build big endian kernel"
+	help
+	  Build a big endian kernel.
+
+	  If unsure, select this option.
+
+config CPU_LITTLE_ENDIAN
+	bool "Build little endian kernel"
+	help
+	  Build a little endian kernel.
+
 	  Note that if cross compiling a little endian kernel,
 	  CROSS_COMPILE must point to a toolchain capable of targeting
 	  little endian powerpc.
+
+endchoice
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 314fced..5877e71 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -101,7 +101,7 @@
 	select GENERIC_CPU_DEVICES if !SMP
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_TIME_VSYSCALL_OLD
+	select GENERIC_TIME_VSYSCALL
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
 	select HAVE_ARCH_SECCOMP_FILTER
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 46cae13..4363528 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -35,7 +35,6 @@
 static char keylen_flag;
 
 struct s390_aes_ctx {
-	u8 iv[AES_BLOCK_SIZE];
 	u8 key[AES_MAX_KEY_SIZE];
 	long enc;
 	long dec;
@@ -441,30 +440,36 @@
 	return aes_set_key(tfm, in_key, key_len);
 }
 
-static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param,
+static int cbc_aes_crypt(struct blkcipher_desc *desc, long func,
 			 struct blkcipher_walk *walk)
 {
+	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	int ret = blkcipher_walk_virt(desc, walk);
 	unsigned int nbytes = walk->nbytes;
+	struct {
+		u8 iv[AES_BLOCK_SIZE];
+		u8 key[AES_MAX_KEY_SIZE];
+	} param;
 
 	if (!nbytes)
 		goto out;
 
-	memcpy(param, walk->iv, AES_BLOCK_SIZE);
+	memcpy(param.iv, walk->iv, AES_BLOCK_SIZE);
+	memcpy(param.key, sctx->key, sctx->key_len);
 	do {
 		/* only use complete blocks */
 		unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
 		u8 *out = walk->dst.virt.addr;
 		u8 *in = walk->src.virt.addr;
 
-		ret = crypt_s390_kmc(func, param, out, in, n);
+		ret = crypt_s390_kmc(func, &param, out, in, n);
 		if (ret < 0 || ret != n)
 			return -EIO;
 
 		nbytes &= AES_BLOCK_SIZE - 1;
 		ret = blkcipher_walk_done(desc, walk, nbytes);
 	} while ((nbytes = walk->nbytes));
-	memcpy(walk->iv, param, AES_BLOCK_SIZE);
+	memcpy(walk->iv, param.iv, AES_BLOCK_SIZE);
 
 out:
 	return ret;
@@ -481,7 +486,7 @@
 		return fallback_blk_enc(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk);
+	return cbc_aes_crypt(desc, sctx->enc, &walk);
 }
 
 static int cbc_aes_decrypt(struct blkcipher_desc *desc,
@@ -495,7 +500,7 @@
 		return fallback_blk_dec(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk);
+	return cbc_aes_crypt(desc, sctx->dec, &walk);
 }
 
 static struct crypto_alg cbc_aes_alg = {
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 316c850..114258e 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -48,33 +48,21 @@
 		: "memory", "cc");
 }
 
+/*
+ * copy_page uses the mvcl instruction with 0xb0 padding byte in order to
+ * bypass caches when copying a page. Especially when copying huge pages
+ * this keeps L1 and L2 data caches alive.
+ */
 static inline void copy_page(void *to, void *from)
 {
-	if (MACHINE_HAS_MVPG) {
-		register unsigned long reg0 asm ("0") = 0;
-		asm volatile(
-			"	mvpg	%0,%1"
-			: : "a" (to), "a" (from), "d" (reg0)
-			: "memory", "cc");
-	} else
-		asm volatile(
-			"	mvc	0(256,%0),0(%1)\n"
-			"	mvc	256(256,%0),256(%1)\n"
-			"	mvc	512(256,%0),512(%1)\n"
-			"	mvc	768(256,%0),768(%1)\n"
-			"	mvc	1024(256,%0),1024(%1)\n"
-			"	mvc	1280(256,%0),1280(%1)\n"
-			"	mvc	1536(256,%0),1536(%1)\n"
-			"	mvc	1792(256,%0),1792(%1)\n"
-			"	mvc	2048(256,%0),2048(%1)\n"
-			"	mvc	2304(256,%0),2304(%1)\n"
-			"	mvc	2560(256,%0),2560(%1)\n"
-			"	mvc	2816(256,%0),2816(%1)\n"
-			"	mvc	3072(256,%0),3072(%1)\n"
-			"	mvc	3328(256,%0),3328(%1)\n"
-			"	mvc	3584(256,%0),3584(%1)\n"
-			"	mvc	3840(256,%0),3840(%1)\n"
-			: : "a" (to), "a" (from) : "memory");
+	register void *reg2 asm ("2") = to;
+	register unsigned long reg3 asm ("3") = 0x1000;
+	register void *reg4 asm ("4") = from;
+	register unsigned long reg5 asm ("5") = 0xb0001000;
+	asm volatile(
+		"	mvcl	2,4"
+		: "+d" (reg2), "+d" (reg3), "+d" (reg4), "+d" (reg5)
+		: : "memory", "cc");
 }
 
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index a73eb2e..bc9746a 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -26,8 +26,9 @@
 	__u64 wtom_clock_nsec;		/*				0x28 */
 	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x30 */
 	__u32 tz_dsttime;		/* Type of dst correction	0x34 */
-	__u32 ectg_available;
-	__u32 ntp_mult;			/* NTP adjusted multiplier	0x3C */
+	__u32 ectg_available;		/* ECTG instruction present	0x38 */
+	__u32 tk_mult;			/* Mult. used for xtime_nsec	0x3c */
+	__u32 tk_shift;			/* Shift used for xtime_nsec	0x40 */
 };
 
 struct vdso_per_cpu_data {
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 2416138..496116c 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -65,7 +65,8 @@
 	DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
 	DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
 	DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
-	DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
+	DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult));
+	DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift));
 	DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
 	DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
 	/* constants used by the vdso */
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 6e24429..95e7ba0 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -194,7 +194,7 @@
 		return -EINVAL;
 
 	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
-	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+	regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
 		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
 		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
 		(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S
index 4a460c4..813ec72 100644
--- a/arch/s390/kernel/pgm_check.S
+++ b/arch/s390/kernel/pgm_check.S
@@ -78,7 +78,7 @@
 PGM_CHECK_DEFAULT			/* 35 */
 PGM_CHECK_DEFAULT			/* 36 */
 PGM_CHECK_DEFAULT			/* 37 */
-PGM_CHECK_DEFAULT			/* 38 */
+PGM_CHECK_64BIT(do_dat_exception)	/* 38 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 39 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3a */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3b */
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index fb53587..d8fd508 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -94,7 +94,7 @@
 		return -EINVAL;
 
 	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
-	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+	regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
 		(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
 	/* Check for invalid user address space control. */
 	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 064c308..dd95f163 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -108,20 +108,10 @@
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-static int s390_next_ktime(ktime_t expires,
+static int s390_next_event(unsigned long delta,
 			   struct clock_event_device *evt)
 {
-	struct timespec ts;
-	u64 nsecs;
-
-	ts.tv_sec = ts.tv_nsec = 0;
-	monotonic_to_bootbased(&ts);
-	nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
-	do_div(nsecs, 125);
-	S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
-	/* Program the maximum value if we have an overflow (== year 2042) */
-	if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
-		S390_lowcore.clock_comparator = -1ULL;
+	S390_lowcore.clock_comparator = get_tod_clock() + delta;
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	return 0;
 }
@@ -146,15 +136,14 @@
 	cpu = smp_processor_id();
 	cd = &per_cpu(comparators, cpu);
 	cd->name		= "comparator";
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_KTIME;
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
 	cd->mult		= 16777;
 	cd->shift		= 12;
 	cd->min_delta_ns	= 1;
 	cd->max_delta_ns	= LONG_MAX;
 	cd->rating		= 400;
 	cd->cpumask		= cpumask_of(cpu);
-	cd->set_next_ktime	= s390_next_ktime;
+	cd->set_next_event	= s390_next_event;
 	cd->set_mode		= s390_set_mode;
 
 	clockevents_register_device(cd);
@@ -221,21 +210,30 @@
 	return &clocksource_tod;
 }
 
-void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
-			struct clocksource *clock, u32 mult)
+void update_vsyscall(struct timekeeper *tk)
 {
-	if (clock != &clocksource_tod)
+	u64 nsecps;
+
+	if (tk->clock != &clocksource_tod)
 		return;
 
 	/* Make userspace gettimeofday spin until we're done. */
 	++vdso_data->tb_update_count;
 	smp_wmb();
-	vdso_data->xtime_tod_stamp = clock->cycle_last;
-	vdso_data->xtime_clock_sec = wall_time->tv_sec;
-	vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
-	vdso_data->wtom_clock_sec = wtm->tv_sec;
-	vdso_data->wtom_clock_nsec = wtm->tv_nsec;
-	vdso_data->ntp_mult = mult;
+	vdso_data->xtime_tod_stamp = tk->clock->cycle_last;
+	vdso_data->xtime_clock_sec = tk->xtime_sec;
+	vdso_data->xtime_clock_nsec = tk->xtime_nsec;
+	vdso_data->wtom_clock_sec =
+		tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
+	vdso_data->wtom_clock_nsec = tk->xtime_nsec +
+		+ (tk->wall_to_monotonic.tv_nsec << tk->shift);
+	nsecps = (u64) NSEC_PER_SEC << tk->shift;
+	while (vdso_data->wtom_clock_nsec >= nsecps) {
+		vdso_data->wtom_clock_nsec -= nsecps;
+		vdso_data->wtom_clock_sec++;
+	}
+	vdso_data->tk_mult = tk->mult;
+	vdso_data->tk_shift = tk->shift;
 	smp_wmb();
 	++vdso_data->tb_update_count;
 }
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index b2224e0..5be8e47 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -38,25 +38,26 @@
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,2f
 	ahi	%r0,-1
-2:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
+2:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	lr	%r2,%r0
-	l	%r0,__VDSO_NTP_MULT(%r5)
+	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	3f
-	a	%r0,__VDSO_NTP_MULT(%r5)
+	a	%r0,__VDSO_TK_MULT(%r5)
 3:	alr	%r0,%r2
-	srdl	%r0,12
-	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
+	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,4f
 	ahi	%r0,1
-4:	l	%r2,__VDSO_XTIME_SEC+4(%r5)
-	al	%r0,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic */
+4:	al	%r0,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic.nsec */
 	al	%r1,__VDSO_WTOM_NSEC+4(%r5)
 	brc	12,5f
 	ahi	%r0,1
-5:	al	%r2,__VDSO_WTOM_SEC+4(%r5)
+5:	l	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srdl	%r0,0(%r2)			/*  >> tk->shift */
+	l	%r2,__VDSO_XTIME_SEC+4(%r5)
+	al	%r2,__VDSO_WTOM_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	1b
 	basr	%r5,0
@@ -86,20 +87,21 @@
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,12f
 	ahi	%r0,-1
-12:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
+12:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	lr	%r2,%r0
-	l	%r0,__VDSO_NTP_MULT(%r5)
+	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	13f
-	a	%r0,__VDSO_NTP_MULT(%r5)
+	a	%r0,__VDSO_TK_MULT(%r5)
 13:	alr	%r0,%r2
-	srdl	%r0,12
-	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
+	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,14f
 	ahi	%r0,1
-14:	l	%r2,__VDSO_XTIME_SEC+4(%r5)
+14:	l	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srdl	%r0,0(%r2)			/*  >> tk->shift */
+	l	%r2,__VDSO_XTIME_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	11b
 	basr	%r5,0
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index 2d36331..fd621a9 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -35,15 +35,14 @@
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,3f
 	ahi	%r0,-1
-3:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
+3:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	st	%r0,24(%r15)
-	l	%r0,__VDSO_NTP_MULT(%r5)
+	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	4f
-	a	%r0,__VDSO_NTP_MULT(%r5)
+	a	%r0,__VDSO_TK_MULT(%r5)
 4:	al	%r0,24(%r15)
-	srdl	%r0,12
 	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,5f
@@ -51,6 +50,8 @@
 5:	mvc	24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	1b
+	l	%r4,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srdl	%r0,0(%r4)			/*  >> tk->shift */
 	l	%r4,24(%r15)			/* get tv_sec from stack */
 	basr	%r5,0
 6:	ltr	%r0,%r0
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index d46c95e..0add107 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -34,14 +34,15 @@
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	0b
 	stck	48(%r15)			/* Store TOD clock */
+	lgf	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* tk->xtime_sec */
+	alg	%r0,__VDSO_WTOM_SEC(%r5)	/*  + wall_to_monotonic.sec */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
-	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
-	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
-	lg	%r0,__VDSO_XTIME_SEC(%r5)
-	alg	%r1,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic */
-	alg	%r0,__VDSO_WTOM_SEC(%r5)
+	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
+	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
+	alg	%r1,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic.nsec */
+	srlg	%r1,%r1,0(%r2)			/*  >> tk->shift */
 	clg	%r4,__VDSO_UPD_COUNT(%r5)	/* check update counter */
 	jne	0b
 	larl	%r5,13f
@@ -62,12 +63,13 @@
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	5b
 	stck	48(%r15)			/* Store TOD clock */
+	lgf	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
-	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
-	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
-	lg	%r0,__VDSO_XTIME_SEC(%r5)
+	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
+	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
+	srlg	%r1,%r1,0(%r2)			/*  >> tk->shift */
+	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* tk->xtime_sec */
 	clg	%r4,__VDSO_UPD_COUNT(%r5)	/* check update counter */
 	jne	5b
 	larl	%r5,13f
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index 36ee674..d0860d1 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -31,12 +31,13 @@
 	stck	48(%r15)			/* Store TOD clock */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
-	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
-	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime.tv_nsec */
-	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* xtime.tv_sec */
+	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
+	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
+	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* tk->xtime_sec */
 	clg	%r4,__VDSO_UPD_COUNT(%r5)	/* check update counter */
 	jne	0b
+	lgf	%r5,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srlg	%r1,%r1,0(%r5)			/*  >> tk->shift */
 	larl	%r5,5f
 2:	clg	%r1,0(%r5)
 	jl	3f
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 97e03ca..dbdab3e 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -78,11 +78,14 @@
  * contains the (negative) exception code.
  */
 #ifdef CONFIG_64BIT
+
 static unsigned long follow_table(struct mm_struct *mm,
 				  unsigned long address, int write)
 {
 	unsigned long *table = (unsigned long *)__pa(mm->pgd);
 
+	if (unlikely(address > mm->context.asce_limit - 1))
+		return -0x38UL;
 	switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
 	case _ASCE_TYPE_REGION1:
 		table = table + ((address >> 53) & 0x7ff);
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 7d6ba9d..e0fc24d 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -3,8 +3,9 @@
 #
 
 avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
+avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\
+				$(comma)4)$(comma)%ymm2,yes,no)
 
-obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o
 obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
 
 obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index f80e668..835488b 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -34,7 +34,7 @@
 #include <asm/cpu_device_id.h>
 #include <asm/i387.h>
 #include <asm/crypto/aes.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/internal/aead.h>
 #include <linux/workqueue.h>
diff --git a/arch/x86/crypto/camellia_aesni_avx2_glue.c b/arch/x86/crypto/camellia_aesni_avx2_glue.c
index 414fe5d..4209a76 100644
--- a/arch/x86/crypto/camellia_aesni_avx2_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/ctr.h>
 #include <crypto/lrw.h>
@@ -21,7 +22,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c
index 37fd0c0..87a041a 100644
--- a/arch/x86/crypto/camellia_aesni_avx_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx_glue.c
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/ctr.h>
 #include <crypto/lrw.h>
@@ -21,7 +22,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c
index c6631813..e6a3700 100644
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -26,13 +26,13 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/cast5.h>
 #include <crypto/cryptd.h>
 #include <crypto/ctr.h>
 #include <asm/xcr.h>
 #include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAST5_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c
index 8d0dfb8..09f3677 100644
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/cast6.h>
 #include <crypto/cryptd.h>
@@ -37,7 +38,6 @@
 #include <crypto/xts.h>
 #include <asm/xcr.h>
 #include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAST6_PARALLEL_BLOCKS 8
diff --git a/arch/x86/crypto/serpent_avx2_glue.c b/arch/x86/crypto/serpent_avx2_glue.c
index 23aabc6..2fae489 100644
--- a/arch/x86/crypto/serpent_avx2_glue.c
+++ b/arch/x86/crypto/serpent_avx2_glue.c
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/ctr.h>
 #include <crypto/lrw.h>
@@ -22,7 +23,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define SERPENT_AVX2_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c
index 9ae83cf..ff48708 100644
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/serpent.h>
 #include <crypto/cryptd.h>
@@ -38,7 +39,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 /* 8-way parallel cipher functions */
diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c
index 97a356e..8c95f86 100644
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -34,6 +34,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/serpent.h>
 #include <crypto/cryptd.h>
@@ -42,7 +43,6 @@
 #include <crypto/lrw.h>
 #include <crypto/xts.h>
 #include <asm/crypto/serpent-sse2.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src)
diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c
index 50226c4..f248546 100644
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -281,7 +281,7 @@
 	/* allow AVX to override SSSE3, it's a little faster */
 	if (avx_usable()) {
 #ifdef CONFIG_AS_AVX2
-		if (boot_cpu_has(X86_FEATURE_AVX2))
+		if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2))
 			sha256_transform_asm = sha256_transform_rorx;
 		else
 #endif
@@ -319,4 +319,4 @@
 MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
 MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS("sha224");
diff --git a/arch/x86/crypto/twofish_avx_glue.c b/arch/x86/crypto/twofish_avx_glue.c
index a62ba54..4e3c665 100644
--- a/arch/x86/crypto/twofish_avx_glue.c
+++ b/arch/x86/crypto/twofish_avx_glue.c
@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/twofish.h>
 #include <crypto/cryptd.h>
@@ -39,7 +40,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/twofish.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 #include <crypto/scatterwalk.h>
 #include <linux/workqueue.h>
diff --git a/arch/x86/include/asm/simd.h b/arch/x86/include/asm/simd.h
new file mode 100644
index 0000000..ee80b92
--- /dev/null
+++ b/arch/x86/include/asm/simd.h
@@ -0,0 +1,11 @@
+
+#include <asm/i387.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ *                instructions or access the SIMD register file
+ */
+static __must_check inline bool may_use_simd(void)
+{
+	return irq_fpu_usable();
+}
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 4ae5734..7bcb70d 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -174,9 +174,8 @@
 	help
 	  Quick & dirty crypto test module.
 
-config CRYPTO_ABLK_HELPER_X86
+config CRYPTO_ABLK_HELPER
 	tristate
-	depends on X86
 	select CRYPTO_CRYPTD
 
 config CRYPTO_GLUE_HELPER_X86
@@ -695,7 +694,7 @@
 	select CRYPTO_AES_X86_64 if 64BIT
 	select CRYPTO_AES_586 if !64BIT
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_ALGAPI
 	select CRYPTO_GLUE_HELPER_X86 if 64BIT
 	select CRYPTO_LRW
@@ -895,7 +894,7 @@
 	depends on CRYPTO
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_CAMELLIA_X86_64
 	select CRYPTO_LRW
@@ -917,7 +916,7 @@
 	depends on CRYPTO
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_CAMELLIA_X86_64
 	select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
@@ -969,7 +968,7 @@
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_CAST_COMMON
 	select CRYPTO_CAST5
 	help
@@ -992,7 +991,7 @@
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_CAST_COMMON
 	select CRYPTO_CAST6
@@ -1110,7 +1109,7 @@
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_LRW
@@ -1132,7 +1131,7 @@
 	depends on X86 && !64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_LRW
@@ -1154,7 +1153,7 @@
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_LRW
@@ -1176,7 +1175,7 @@
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_SERPENT_AVX_X86_64
@@ -1292,7 +1291,7 @@
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_TWOFISH_COMMON
 	select CRYPTO_TWOFISH_X86_64
diff --git a/crypto/Makefile b/crypto/Makefile
index b3a7e80..989c510 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -2,8 +2,13 @@
 # Cryptographic API
 #
 
+# memneq MUST be built with -Os or -O0 to prevent early-return optimizations
+# that will defeat memneq's actual purpose to prevent timing attacks.
+CFLAGS_REMOVE_memneq.o := -O1 -O2 -O3
+CFLAGS_memneq.o := -Os
+
 obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-y := api.o cipher.o compress.o
+crypto-y := api.o cipher.o compress.o memneq.o
 
 obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
 
@@ -105,3 +110,4 @@
 obj-$(CONFIG_ASYNC_CORE) += async_tx/
 obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/
 obj-$(CONFIG_CRYPTO_HASH_INFO) += hash_info.o
+obj-$(CONFIG_CRYPTO_ABLK_HELPER) += ablk_helper.o
diff --git a/arch/x86/crypto/ablk_helper.c b/crypto/ablk_helper.c
similarity index 95%
rename from arch/x86/crypto/ablk_helper.c
rename to crypto/ablk_helper.c
index 43282fe..ffe7278 100644
--- a/arch/x86/crypto/ablk_helper.c
+++ b/crypto/ablk_helper.c
@@ -28,10 +28,11 @@
 #include <linux/crypto.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <crypto/algapi.h>
 #include <crypto/cryptd.h>
-#include <asm/i387.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
+#include <asm/simd.h>
 
 int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
 		 unsigned int key_len)
@@ -70,11 +71,11 @@
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (!irq_fpu_usable()) {
+	if (!may_use_simd()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 
-		memcpy(cryptd_req, req, sizeof(*req));
+		*cryptd_req = *req;
 		ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
 
 		return crypto_ablkcipher_encrypt(cryptd_req);
@@ -89,11 +90,11 @@
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (!irq_fpu_usable()) {
+	if (!may_use_simd()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 
-		memcpy(cryptd_req, req, sizeof(*req));
+		*cryptd_req = *req;
 		ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
 
 		return crypto_ablkcipher_decrypt(cryptd_req);
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index 7d4a8d2..40886c4 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -16,9 +16,7 @@
 #include <crypto/internal/skcipher.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/rtnetlink.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -30,8 +28,6 @@
 
 #include "internal.h"
 
-static const char *skcipher_default_geniv __read_mostly;
-
 struct ablkcipher_buffer {
 	struct list_head	entry;
 	struct scatter_walk	dst;
@@ -527,8 +523,7 @@
 	    alg->cra_blocksize)
 		return "chainiv";
 
-	return alg->cra_flags & CRYPTO_ALG_ASYNC ?
-	       "eseqiv" : skcipher_default_geniv;
+	return "eseqiv";
 }
 
 static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask)
@@ -709,17 +704,3 @@
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
-
-static int __init skcipher_module_init(void)
-{
-	skcipher_default_geniv = num_possible_cpus() > 1 ?
-				 "eseqiv" : "chainiv";
-	return 0;
-}
-
-static void skcipher_module_exit(void)
-{
-}
-
-module_init(skcipher_module_init);
-module_exit(skcipher_module_exit);
diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c
index c0bb377..666f196 100644
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -230,11 +230,11 @@
 	 */
 	if (byte_count < DEFAULT_BLK_SZ) {
 empty_rbuf:
-		for (; ctx->rand_data_valid < DEFAULT_BLK_SZ;
-			ctx->rand_data_valid++) {
+		while (ctx->rand_data_valid < DEFAULT_BLK_SZ) {
 			*ptr = ctx->rand_data[ctx->rand_data_valid];
 			ptr++;
 			byte_count--;
+			ctx->rand_data_valid++;
 			if (byte_count == 0)
 				goto done;
 		}
diff --git a/crypto/asymmetric_keys/rsa.c b/crypto/asymmetric_keys/rsa.c
index 90a17f5..459cf97 100644
--- a/crypto/asymmetric_keys/rsa.c
+++ b/crypto/asymmetric_keys/rsa.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <crypto/algapi.h>
 #include "public_key.h"
 
 MODULE_LICENSE("GPL");
@@ -189,12 +190,12 @@
 		}
 	}
 
-	if (memcmp(asn1_template, EM + T_offset, asn1_size) != 0) {
+	if (crypto_memneq(asn1_template, EM + T_offset, asn1_size) != 0) {
 		kleave(" = -EBADMSG [EM[T] ASN.1 mismatch]");
 		return -EBADMSG;
 	}
 
-	if (memcmp(H, EM + T_offset + asn1_size, hash_size) != 0) {
+	if (crypto_memneq(H, EM + T_offset + asn1_size, hash_size) != 0) {
 		kleave(" = -EKEYREJECTED [EM[T] hash mismatch]");
 		return -EKEYREJECTED;
 	}
diff --git a/crypto/asymmetric_keys/x509_public_key.c b/crypto/asymmetric_keys/x509_public_key.c
index f83300b..382ef0d 100644
--- a/crypto/asymmetric_keys/x509_public_key.c
+++ b/crypto/asymmetric_keys/x509_public_key.c
@@ -18,60 +18,12 @@
 #include <linux/asn1_decoder.h>
 #include <keys/asymmetric-subtype.h>
 #include <keys/asymmetric-parser.h>
-#include <keys/system_keyring.h>
 #include <crypto/hash.h>
 #include "asymmetric_keys.h"
 #include "public_key.h"
 #include "x509_parser.h"
 
 /*
- * Find a key in the given keyring by issuer and authority.
- */
-static struct key *x509_request_asymmetric_key(
-	struct key *keyring,
-	const char *signer, size_t signer_len,
-	const char *authority, size_t auth_len)
-{
-	key_ref_t key;
-	char *id;
-
-	/* Construct an identifier. */
-	id = kmalloc(signer_len + 2 + auth_len + 1, GFP_KERNEL);
-	if (!id)
-		return ERR_PTR(-ENOMEM);
-
-	memcpy(id, signer, signer_len);
-	id[signer_len + 0] = ':';
-	id[signer_len + 1] = ' ';
-	memcpy(id + signer_len + 2, authority, auth_len);
-	id[signer_len + 2 + auth_len] = 0;
-
-	pr_debug("Look up: \"%s\"\n", id);
-
-	key = keyring_search(make_key_ref(keyring, 1),
-			     &key_type_asymmetric, id);
-	if (IS_ERR(key))
-		pr_debug("Request for module key '%s' err %ld\n",
-			 id, PTR_ERR(key));
-	kfree(id);
-
-	if (IS_ERR(key)) {
-		switch (PTR_ERR(key)) {
-			/* Hide some search errors */
-		case -EACCES:
-		case -ENOTDIR:
-		case -EAGAIN:
-			return ERR_PTR(-ENOKEY);
-		default:
-			return ERR_CAST(key);
-		}
-	}
-
-	pr_devel("<==%s() = 0 [%x]\n", __func__, key_serial(key_ref_to_ptr(key)));
-	return key_ref_to_ptr(key);
-}
-
-/*
  * Set up the signature parameters in an X.509 certificate.  This involves
  * digesting the signed data and extracting the signature.
  */
@@ -151,33 +103,6 @@
 EXPORT_SYMBOL_GPL(x509_check_signature);
 
 /*
- * Check the new certificate against the ones in the trust keyring.  If one of
- * those is the signing key and validates the new certificate, then mark the
- * new certificate as being trusted.
- *
- * Return 0 if the new certificate was successfully validated, 1 if we couldn't
- * find a matching parent certificate in the trusted list and an error if there
- * is a matching certificate but the signature check fails.
- */
-static int x509_validate_trust(struct x509_certificate *cert,
-			       struct key *trust_keyring)
-{
-	const struct public_key *pk;
-	struct key *key;
-	int ret = 1;
-
-	key = x509_request_asymmetric_key(trust_keyring,
-					  cert->issuer, strlen(cert->issuer),
-					  cert->authority,
-					  strlen(cert->authority));
-	if (!IS_ERR(key))  {
-		pk = key->payload.data;
-		ret = x509_check_signature(pk, cert);
-	}
-	return ret;
-}
-
-/*
  * Attempt to parse a data blob for a key as an X509 certificate.
  */
 static int x509_key_preparse(struct key_preparsed_payload *prep)
@@ -230,13 +155,9 @@
 	/* Check the signature on the key if it appears to be self-signed */
 	if (!cert->authority ||
 	    strcmp(cert->fingerprint, cert->authority) == 0) {
-		ret = x509_check_signature(cert->pub, cert); /* self-signed */
+		ret = x509_check_signature(cert->pub, cert);
 		if (ret < 0)
 			goto error_free_cert;
-	} else {
-		ret = x509_validate_trust(cert, system_trusted_keyring);
-		if (!ret)
-			prep->trusted = 1;
 	}
 
 	/* Propose a description */
diff --git a/crypto/authenc.c b/crypto/authenc.c
index ffce19d..1875e70 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -52,40 +52,52 @@
 		aead_request_complete(req, err);
 }
 
-static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
-				 unsigned int keylen)
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+			       unsigned int keylen)
 {
-	unsigned int authkeylen;
-	unsigned int enckeylen;
-	struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
-	struct crypto_ahash *auth = ctx->auth;
-	struct crypto_ablkcipher *enc = ctx->enc;
-	struct rtattr *rta = (void *)key;
+	struct rtattr *rta = (struct rtattr *)key;
 	struct crypto_authenc_key_param *param;
-	int err = -EINVAL;
 
 	if (!RTA_OK(rta, keylen))
-		goto badkey;
+		return -EINVAL;
 	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
+		return -EINVAL;
 	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
+		return -EINVAL;
 
 	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
+	keys->enckeylen = be32_to_cpu(param->enckeylen);
 
 	key += RTA_ALIGN(rta->rta_len);
 	keylen -= RTA_ALIGN(rta->rta_len);
 
-	if (keylen < enckeylen)
-		goto badkey;
+	if (keylen < keys->enckeylen)
+		return -EINVAL;
 
-	authkeylen = keylen - enckeylen;
+	keys->authkeylen = keylen - keys->enckeylen;
+	keys->authkey = key;
+	keys->enckey = key + keys->authkeylen;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(crypto_authenc_extractkeys);
+
+static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
+				 unsigned int keylen)
+{
+	struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+	struct crypto_ahash *auth = ctx->auth;
+	struct crypto_ablkcipher *enc = ctx->enc;
+	struct crypto_authenc_keys keys;
+	int err = -EINVAL;
+
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
+		goto badkey;
 
 	crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
 	crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) &
 				    CRYPTO_TFM_REQ_MASK);
-	err = crypto_ahash_setkey(auth, key, authkeylen);
+	err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
 	crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) &
 				       CRYPTO_TFM_RES_MASK);
 
@@ -95,7 +107,7 @@
 	crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
 	crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc) &
 					 CRYPTO_TFM_REQ_MASK);
-	err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+	err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
 	crypto_aead_set_flags(authenc, crypto_ablkcipher_get_flags(enc) &
 				       CRYPTO_TFM_RES_MASK);
 
@@ -188,7 +200,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -227,7 +239,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -462,7 +474,7 @@
 	ihash = ohash + authsize;
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
-	return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+	return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
 }
 
 static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
diff --git a/crypto/authencesn.c b/crypto/authencesn.c
index ab53762..4be0dd4 100644
--- a/crypto/authencesn.c
+++ b/crypto/authencesn.c
@@ -59,37 +59,19 @@
 static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *key,
 				     unsigned int keylen)
 {
-	unsigned int authkeylen;
-	unsigned int enckeylen;
 	struct crypto_authenc_esn_ctx *ctx = crypto_aead_ctx(authenc_esn);
 	struct crypto_ahash *auth = ctx->auth;
 	struct crypto_ablkcipher *enc = ctx->enc;
-	struct rtattr *rta = (void *)key;
-	struct crypto_authenc_key_param *param;
+	struct crypto_authenc_keys keys;
 	int err = -EINVAL;
 
-	if (!RTA_OK(rta, keylen))
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
 		goto badkey;
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < enckeylen)
-		goto badkey;
-
-	authkeylen = keylen - enckeylen;
 
 	crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
 	crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc_esn) &
 				     CRYPTO_TFM_REQ_MASK);
-	err = crypto_ahash_setkey(auth, key, authkeylen);
+	err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
 	crypto_aead_set_flags(authenc_esn, crypto_ahash_get_flags(auth) &
 					   CRYPTO_TFM_RES_MASK);
 
@@ -99,7 +81,7 @@
 	crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
 	crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc_esn) &
 					 CRYPTO_TFM_REQ_MASK);
-	err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+	err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
 	crypto_aead_set_flags(authenc_esn, crypto_ablkcipher_get_flags(enc) &
 					   CRYPTO_TFM_RES_MASK);
 
@@ -247,7 +229,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -296,7 +278,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -336,7 +318,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -568,7 +550,7 @@
 	ihash = ohash + authsize;
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
-	return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+	return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
 }
 
 static int crypto_authenc_esn_iverify(struct aead_request *req, u8 *iv,
diff --git a/crypto/ccm.c b/crypto/ccm.c
index 499c917..3e05499 100644
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -363,7 +363,7 @@
 
 	if (!err) {
 		err = crypto_ccm_auth(req, req->dst, cryptlen);
-		if (!err && memcmp(pctx->auth_tag, pctx->odata, authsize))
+		if (!err && crypto_memneq(pctx->auth_tag, pctx->odata, authsize))
 			err = -EBADMSG;
 	}
 	aead_request_complete(req, err);
@@ -422,7 +422,7 @@
 		return err;
 
 	/* verify */
-	if (memcmp(authtag, odata, authsize))
+	if (crypto_memneq(authtag, odata, authsize))
 		return -EBADMSG;
 
 	return err;
diff --git a/crypto/gcm.c b/crypto/gcm.c
index 43e1fb0..b4f0179 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -582,7 +582,7 @@
 
 	crypto_xor(auth_tag, iauth_tag, 16);
 	scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0);
-	return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
+	return crypto_memneq(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
 }
 
 static void gcm_decrypt_done(struct crypto_async_request *areq, int err)
diff --git a/crypto/memneq.c b/crypto/memneq.c
new file mode 100644
index 0000000..cd01622
--- /dev/null
+++ b/crypto/memneq.c
@@ -0,0 +1,138 @@
+/*
+ * Constant-time equality testing of memory regions.
+ *
+ * Authors:
+ *
+ *   James Yonan <james@openvpn.net>
+ *   Daniel Borkmann <dborkman@redhat.com>
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of OpenVPN Technologies nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <crypto/algapi.h>
+
+#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ
+
+/* Generic path for arbitrary size */
+static inline unsigned long
+__crypto_memneq_generic(const void *a, const void *b, size_t size)
+{
+	unsigned long neq = 0;
+
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+	while (size >= sizeof(unsigned long)) {
+		neq |= *(unsigned long *)a ^ *(unsigned long *)b;
+		a += sizeof(unsigned long);
+		b += sizeof(unsigned long);
+		size -= sizeof(unsigned long);
+	}
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+	while (size > 0) {
+		neq |= *(unsigned char *)a ^ *(unsigned char *)b;
+		a += 1;
+		b += 1;
+		size -= 1;
+	}
+	return neq;
+}
+
+/* Loop-free fast-path for frequently used 16-byte size */
+static inline unsigned long __crypto_memneq_16(const void *a, const void *b)
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (sizeof(unsigned long) == 8)
+		return ((*(unsigned long *)(a)   ^ *(unsigned long *)(b))
+		      | (*(unsigned long *)(a+8) ^ *(unsigned long *)(b+8)));
+	else if (sizeof(unsigned int) == 4)
+		return ((*(unsigned int *)(a)    ^ *(unsigned int *)(b))
+                      | (*(unsigned int *)(a+4)  ^ *(unsigned int *)(b+4))
+		      | (*(unsigned int *)(a+8)  ^ *(unsigned int *)(b+8))
+	              | (*(unsigned int *)(a+12) ^ *(unsigned int *)(b+12)));
+	else
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+		return ((*(unsigned char *)(a)    ^ *(unsigned char *)(b))
+		      | (*(unsigned char *)(a+1)  ^ *(unsigned char *)(b+1))
+		      | (*(unsigned char *)(a+2)  ^ *(unsigned char *)(b+2))
+		      | (*(unsigned char *)(a+3)  ^ *(unsigned char *)(b+3))
+		      | (*(unsigned char *)(a+4)  ^ *(unsigned char *)(b+4))
+		      | (*(unsigned char *)(a+5)  ^ *(unsigned char *)(b+5))
+		      | (*(unsigned char *)(a+6)  ^ *(unsigned char *)(b+6))
+		      | (*(unsigned char *)(a+7)  ^ *(unsigned char *)(b+7))
+		      | (*(unsigned char *)(a+8)  ^ *(unsigned char *)(b+8))
+		      | (*(unsigned char *)(a+9)  ^ *(unsigned char *)(b+9))
+		      | (*(unsigned char *)(a+10) ^ *(unsigned char *)(b+10))
+		      | (*(unsigned char *)(a+11) ^ *(unsigned char *)(b+11))
+		      | (*(unsigned char *)(a+12) ^ *(unsigned char *)(b+12))
+		      | (*(unsigned char *)(a+13) ^ *(unsigned char *)(b+13))
+		      | (*(unsigned char *)(a+14) ^ *(unsigned char *)(b+14))
+		      | (*(unsigned char *)(a+15) ^ *(unsigned char *)(b+15)));
+}
+
+/* Compare two areas of memory without leaking timing information,
+ * and with special optimizations for common sizes.  Users should
+ * not call this function directly, but should instead use
+ * crypto_memneq defined in crypto/algapi.h.
+ */
+noinline unsigned long __crypto_memneq(const void *a, const void *b,
+				       size_t size)
+{
+	switch (size) {
+	case 16:
+		return __crypto_memneq_16(a, b);
+	default:
+		return __crypto_memneq_generic(a, b, size);
+	}
+}
+EXPORT_SYMBOL(__crypto_memneq);
+
+#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */
diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h
index f691d0e..ff97430 100644
--- a/drivers/acpi/acpica/acresrc.h
+++ b/drivers/acpi/acpica/acresrc.h
@@ -184,7 +184,7 @@
 			     struct acpi_buffer *output_buffer);
 
 acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
 			     struct acpi_buffer *output_buffer);
 
 acpi_status
@@ -227,8 +227,8 @@
 			u32 aml_buffer_length, acpi_size * size_needed);
 
 acpi_status
-acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer,
-		       acpi_size * size_needed);
+acpi_rs_get_aml_length(struct acpi_resource *resource_list,
+		       acpi_size resource_list_size, acpi_size * size_needed);
 
 acpi_status
 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index 2437373..fd1ff54 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -106,6 +106,7 @@
 void acpi_ns_delete_node(struct acpi_namespace_node *node)
 {
 	union acpi_operand_object *obj_desc;
+	union acpi_operand_object *next_desc;
 
 	ACPI_FUNCTION_NAME(ns_delete_node);
 
@@ -114,12 +115,13 @@
 	acpi_ns_detach_object(node);
 
 	/*
-	 * Delete an attached data object if present (an object that was created
-	 * and attached via acpi_attach_data). Note: After any normal object is
-	 * detached above, the only possible remaining object is a data object.
+	 * Delete an attached data object list if present (objects that were
+	 * attached via acpi_attach_data). Note: After any normal object is
+	 * detached above, the only possible remaining object(s) are data
+	 * objects, in a linked list.
 	 */
 	obj_desc = node->object;
-	if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
+	while (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
 
 		/* Invoke the attached data deletion handler if present */
 
@@ -127,7 +129,15 @@
 			obj_desc->data.handler(node, obj_desc->data.pointer);
 		}
 
+		next_desc = obj_desc->common.next_object;
 		acpi_ut_remove_reference(obj_desc);
+		obj_desc = next_desc;
+	}
+
+	/* Special case for the statically allocated root node */
+
+	if (node == acpi_gbl_root_node) {
+		return;
 	}
 
 	/* Now we can delete the node */
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index cc2fea9..4a0665b 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -593,24 +593,26 @@
 
 void acpi_ns_terminate(void)
 {
-	union acpi_operand_object *obj_desc;
+	acpi_status status;
 
 	ACPI_FUNCTION_TRACE(ns_terminate);
 
 	/*
-	 * 1) Free the entire namespace -- all nodes and objects
-	 *
-	 * Delete all object descriptors attached to namepsace nodes
+	 * Free the entire namespace -- all nodes and all objects
+	 * attached to the nodes
 	 */
 	acpi_ns_delete_namespace_subtree(acpi_gbl_root_node);
 
-	/* Detach any objects attached to the root */
+	/* Delete any objects attached to the root node */
 
-	obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node);
-	if (obj_desc) {
-		acpi_ns_detach_object(acpi_gbl_root_node);
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return_VOID;
 	}
 
+	acpi_ns_delete_node(acpi_gbl_root_node);
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
 	return_VOID;
 }
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index b62a0f4..b60c9cf 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -174,6 +174,7 @@
  * FUNCTION:    acpi_rs_get_aml_length
  *
  * PARAMETERS:  resource            - Pointer to the resource linked list
+ *              resource_list_size  - Size of the resource linked list
  *              size_needed         - Where the required size is returned
  *
  * RETURN:      Status
@@ -185,16 +186,20 @@
  ******************************************************************************/
 
 acpi_status
-acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
+acpi_rs_get_aml_length(struct acpi_resource *resource,
+		       acpi_size resource_list_size, acpi_size * size_needed)
 {
 	acpi_size aml_size_needed = 0;
+	struct acpi_resource *resource_end;
 	acpi_rs_length total_size;
 
 	ACPI_FUNCTION_TRACE(rs_get_aml_length);
 
 	/* Traverse entire list of internal resource descriptors */
 
-	while (resource) {
+	resource_end =
+	    ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size);
+	while (resource < resource_end) {
 
 		/* Validate the descriptor type */
 
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 65f3e1c..3a2ace9 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -418,22 +418,21 @@
  *
  * FUNCTION:    acpi_rs_create_aml_resources
  *
- * PARAMETERS:  linked_list_buffer      - Pointer to the resource linked list
- *              output_buffer           - Pointer to the user's buffer
+ * PARAMETERS:  resource_list           - Pointer to the resource list buffer
+ *              output_buffer           - Where the AML buffer is returned
  *
  * RETURN:      Status  AE_OK if okay, else a valid acpi_status code.
  *              If the output_buffer is too small, the error will be
  *              AE_BUFFER_OVERFLOW and output_buffer->Length will point
  *              to the size buffer needed.
  *
- * DESCRIPTION: Takes the linked list of device resources and
- *              creates a bytestream to be used as input for the
- *              _SRS control method.
+ * DESCRIPTION: Converts a list of device resources to an AML bytestream
+ *              to be used as input for the _SRS control method.
  *
  ******************************************************************************/
 
 acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
 			     struct acpi_buffer *output_buffer)
 {
 	acpi_status status;
@@ -441,16 +440,16 @@
 
 	ACPI_FUNCTION_TRACE(rs_create_aml_resources);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "LinkedListBuffer = %p\n",
-			  linked_list_buffer));
+	/* Params already validated, no need to re-validate here */
 
-	/*
-	 * Params already validated, so we don't re-validate here
-	 *
-	 * Pass the linked_list_buffer into a module that calculates
-	 * the buffer size needed for the byte stream.
-	 */
-	status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n",
+			  resource_list->pointer));
+
+	/* Get the buffer size needed for the AML byte stream */
+
+	status = acpi_rs_get_aml_length(resource_list->pointer,
+					resource_list->length,
+					&aml_size_needed);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n",
 			  (u32)aml_size_needed, acpi_format_exception(status)));
@@ -467,10 +466,9 @@
 
 	/* Do the conversion */
 
-	status =
-	    acpi_rs_convert_resources_to_aml(linked_list_buffer,
-					     aml_size_needed,
-					     output_buffer->pointer);
+	status = acpi_rs_convert_resources_to_aml(resource_list->pointer,
+						  aml_size_needed,
+						  output_buffer->pointer);
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}
diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c
index aef303d..14a7982 100644
--- a/drivers/acpi/acpica/rsutils.c
+++ b/drivers/acpi/acpica/rsutils.c
@@ -753,7 +753,7 @@
 	 * Convert the linked list into a byte stream
 	 */
 	buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
-	status = acpi_rs_create_aml_resources(in_buffer->pointer, &buffer);
+	status = acpi_rs_create_aml_resources(in_buffer, &buffer);
 	if (ACPI_FAILURE(status)) {
 		goto cleanup;
 	}
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index 1a67b39..03ae8af 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -185,6 +185,7 @@
 		}
 
 		acpi_gbl_prev_thread_id = thread_id;
+		acpi_gbl_nesting_level = 0;
 	}
 
 	/*
@@ -193,13 +194,21 @@
 	 */
 	acpi_os_printf("%9s-%04ld ", module_name, line_number);
 
+#ifdef ACPI_EXEC_APP
+	/*
+	 * For acpi_exec only, emit the thread ID and nesting level.
+	 * Note: nesting level is really only useful during a single-thread
+	 * execution. Otherwise, multiple threads will keep resetting the
+	 * level.
+	 */
 	if (ACPI_LV_THREADS & acpi_dbg_level) {
 		acpi_os_printf("[%u] ", (u32)thread_id);
 	}
 
-	acpi_os_printf("[%02ld] %-22.22s: ",
-		       acpi_gbl_nesting_level,
-		       acpi_ut_trim_function_name(function_name));
+	acpi_os_printf("[%02ld] ", acpi_gbl_nesting_level);
+#endif
+
+	acpi_os_printf("%-22.22s: ", acpi_ut_trim_function_name(function_name));
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
@@ -420,7 +429,9 @@
 				 component_id, "%s\n", acpi_gbl_fn_exit_str);
 	}
 
-	acpi_gbl_nesting_level--;
+	if (acpi_gbl_nesting_level) {
+		acpi_gbl_nesting_level--;
+	}
 }
 
 ACPI_EXPORT_SYMBOL(acpi_ut_exit)
@@ -467,7 +478,9 @@
 		}
 	}
 
-	acpi_gbl_nesting_level--;
+	if (acpi_gbl_nesting_level) {
+		acpi_gbl_nesting_level--;
+	}
 }
 
 ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
@@ -504,7 +517,9 @@
 				 ACPI_FORMAT_UINT64(value));
 	}
 
-	acpi_gbl_nesting_level--;
+	if (acpi_gbl_nesting_level) {
+		acpi_gbl_nesting_level--;
+	}
 }
 
 ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
@@ -540,7 +555,9 @@
 				 ptr);
 	}
 
-	acpi_gbl_nesting_level--;
+	if (acpi_gbl_nesting_level) {
+		acpi_gbl_nesting_level--;
+	}
 }
 
 #endif
diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c
index 266bc58..386a9fe 100644
--- a/drivers/acpi/nvs.c
+++ b/drivers/acpi/nvs.c
@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <linux/acpi_io.h>
-#include <acpi/acpiosxf.h>
 
 /* ACPI NVS regions, APEI may use it */
 
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 0703bff..20360e4 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -65,6 +65,9 @@
 	.ids = root_device_ids,
 	.attach = acpi_pci_root_add,
 	.detach = acpi_pci_root_remove,
+	.hotplug = {
+		.ignore = true,
+	},
 };
 
 static DEFINE_MUTEX(osc_lock);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 15daa21..fd39459 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1772,7 +1772,7 @@
 	 */
 	list_for_each_entry(hwid, &pnp.ids, list) {
 		handler = acpi_scan_match_handler(hwid->id, NULL);
-		if (handler) {
+		if (handler && !handler->hotplug.ignore) {
 			acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 					acpi_hotplug_notify_cb, handler);
 			break;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 14df305..721e949 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -525,7 +525,7 @@
 	 * generate wakeup events.
 	 */
 	if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
-		acpi_event_status pwr_btn_status;
+		acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
 
 		acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
 
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index db52936..6dbc3ca 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -309,7 +309,7 @@
 		sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
 			table_attr->instance);
 
-	table_attr->attr.size = 0;
+	table_attr->attr.size = table_header->length;
 	table_attr->attr.read = acpi_table_show;
 	table_attr->attr.attr.name = table_attr->name;
 	table_attr->attr.attr.mode = 0400;
@@ -354,8 +354,9 @@
 {
 	struct acpi_table_attr *table_attr;
 	struct acpi_table_header *table_header = NULL;
-	int table_index = 0;
-	int result;
+	int table_index;
+	acpi_status status;
+	int ret;
 
 	tables_kobj = kobject_create_and_add("tables", acpi_kobj);
 	if (!tables_kobj)
@@ -365,33 +366,34 @@
 	if (!dynamic_tables_kobj)
 		goto err_dynamic_tables;
 
-	do {
-		result = acpi_get_table_by_index(table_index, &table_header);
-		if (!result) {
-			table_index++;
-			table_attr = NULL;
-			table_attr =
-			    kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
-			if (!table_attr)
-				return -ENOMEM;
+	for (table_index = 0;; table_index++) {
+		status = acpi_get_table_by_index(table_index, &table_header);
 
-			acpi_table_attr_init(table_attr, table_header);
-			result =
-			    sysfs_create_bin_file(tables_kobj,
-						  &table_attr->attr);
-			if (result) {
-				kfree(table_attr);
-				return result;
-			} else
-				list_add_tail(&table_attr->node,
-					      &acpi_table_attr_list);
+		if (status == AE_BAD_PARAMETER)
+			break;
+
+		if (ACPI_FAILURE(status))
+			continue;
+
+		table_attr = NULL;
+		table_attr = kzalloc(sizeof(*table_attr), GFP_KERNEL);
+		if (!table_attr)
+			return -ENOMEM;
+
+		acpi_table_attr_init(table_attr, table_header);
+		ret = sysfs_create_bin_file(tables_kobj, &table_attr->attr);
+		if (ret) {
+			kfree(table_attr);
+			return ret;
 		}
-	} while (!result);
+		list_add_tail(&table_attr->node, &acpi_table_attr_list);
+	}
+
 	kobject_uevent(tables_kobj, KOBJ_ADD);
 	kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
-	result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
+	status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
 
-	return result == AE_OK ? 0 : -EINVAL;
+	return ACPI_FAILURE(status) ? -EINVAL : 0;
 err_dynamic_tables:
 	kobject_put(tables_kobj);
 err:
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e2903d0..14f1e95 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -435,6 +435,8 @@
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
+	  .driver_data = board_ahci_yes_fbs },
 
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index f955431..4b231ba 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -329,6 +329,7 @@
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "snps,spear-ahci", },
 	{ .compatible = "snps,exynos5440-ahci", },
+	{ .compatible = "ibm,476gtr-ahci", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 81a94a3..75b9367 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6304,10 +6304,9 @@
 		for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
 			ata_tlink_delete(&ap->pmp_link[i]);
 	}
-	ata_tport_delete(ap);
-
 	/* remove the associated SCSI host */
 	scsi_remove_host(ap->scsi_host);
+	ata_tport_delete(ap);
 }
 
 /**
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index 68f9e32..88949c6 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -88,15 +88,13 @@
 static bool odd_can_poweroff(struct ata_device *ata_dev)
 {
 	acpi_handle handle;
-	acpi_status status;
 	struct acpi_device *acpi_dev;
 
 	handle = ata_dev_acpi_handle(ata_dev);
 	if (!handle)
 		return false;
 
-	status = acpi_bus_get_device(handle, &acpi_dev);
-	if (ACPI_FAILURE(status))
+	if (acpi_bus_get_device(handle, &acpi_dev))
 		return false;
 
 	return acpi_device_can_poweroff(acpi_dev);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index e88690e..73492dd 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -319,6 +319,7 @@
 	ret = clk_set_rate(acdev->clk, 166000000);
 	if (ret) {
 		dev_warn(acdev->host->dev, "clock set rate failed");
+		clk_disable_unprepare(acdev->clk);
 		return ret;
 	}
 
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index c206de2..2f2b084 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -165,6 +165,19 @@
 
  	  If unsure, say Y.
 
+config HW_RANDOM_OMAP3_ROM
+	tristate "OMAP3 ROM Random Number Generator support"
+	depends on HW_RANDOM && ARCH_OMAP3
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on OMAP34xx processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omap3-rom-rng.
+
+	  If unsure, say Y.
+
 config HW_RANDOM_OCTEON
 	tristate "Octeon Random Number Generator support"
 	depends on HW_RANDOM && CAVIUM_OCTEON_SOC
@@ -327,3 +340,15 @@
 	  module will be called tpm-rng.
 
 	  If unsure, say Y.
+
+config HW_RANDOM_MSM
+	tristate "Qualcomm MSM Random Number Generator support"
+	depends on HW_RANDOM && ARCH_MSM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Qualcomm MSM SoCs.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called msm-rng.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index d7d2435..3ae7755 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,6 +15,7 @@
 obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o
 obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
+obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
 obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
@@ -28,3 +29,4 @@
 obj-$(CONFIG_HW_RANDOM_EXYNOS)	+= exynos-rng.o
 obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
 obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
+obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
diff --git a/drivers/char/hw_random/msm-rng.c b/drivers/char/hw_random/msm-rng.c
new file mode 100644
index 0000000..148521e
--- /dev/null
+++ b/drivers/char/hw_random/msm-rng.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/* Device specific register offsets */
+#define PRNG_DATA_OUT		0x0000
+#define PRNG_STATUS		0x0004
+#define PRNG_LFSR_CFG		0x0100
+#define PRNG_CONFIG		0x0104
+
+/* Device specific register masks and config values */
+#define PRNG_LFSR_CFG_MASK	0x0000ffff
+#define PRNG_LFSR_CFG_CLOCKS	0x0000dddd
+#define PRNG_CONFIG_HW_ENABLE	BIT(1)
+#define PRNG_STATUS_DATA_AVAIL	BIT(0)
+
+#define MAX_HW_FIFO_DEPTH	16
+#define MAX_HW_FIFO_SIZE	(MAX_HW_FIFO_DEPTH * 4)
+#define WORD_SZ			4
+
+struct msm_rng {
+	void __iomem *base;
+	struct clk *clk;
+	struct hwrng hwrng;
+};
+
+#define to_msm_rng(p)	container_of(p, struct msm_rng, hwrng)
+
+static int msm_rng_enable(struct hwrng *hwrng, int enable)
+{
+	struct msm_rng *rng = to_msm_rng(hwrng);
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(rng->clk);
+	if (ret)
+		return ret;
+
+	if (enable) {
+		/* Enable PRNG only if it is not already enabled */
+		val = readl_relaxed(rng->base + PRNG_CONFIG);
+		if (val & PRNG_CONFIG_HW_ENABLE)
+			goto already_enabled;
+
+		val = readl_relaxed(rng->base + PRNG_LFSR_CFG);
+		val &= ~PRNG_LFSR_CFG_MASK;
+		val |= PRNG_LFSR_CFG_CLOCKS;
+		writel(val, rng->base + PRNG_LFSR_CFG);
+
+		val = readl_relaxed(rng->base + PRNG_CONFIG);
+		val |= PRNG_CONFIG_HW_ENABLE;
+		writel(val, rng->base + PRNG_CONFIG);
+	} else {
+		val = readl_relaxed(rng->base + PRNG_CONFIG);
+		val &= ~PRNG_CONFIG_HW_ENABLE;
+		writel(val, rng->base + PRNG_CONFIG);
+	}
+
+already_enabled:
+	clk_disable_unprepare(rng->clk);
+	return 0;
+}
+
+static int msm_rng_read(struct hwrng *hwrng, void *data, size_t max, bool wait)
+{
+	struct msm_rng *rng = to_msm_rng(hwrng);
+	size_t currsize = 0;
+	u32 *retdata = data;
+	size_t maxsize;
+	int ret;
+	u32 val;
+
+	/* calculate max size bytes to transfer back to caller */
+	maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, max);
+
+	/* no room for word data */
+	if (maxsize < WORD_SZ)
+		return 0;
+
+	ret = clk_prepare_enable(rng->clk);
+	if (ret)
+		return ret;
+
+	/* read random data from hardware */
+	do {
+		val = readl_relaxed(rng->base + PRNG_STATUS);
+		if (!(val & PRNG_STATUS_DATA_AVAIL))
+			break;
+
+		val = readl_relaxed(rng->base + PRNG_DATA_OUT);
+		if (!val)
+			break;
+
+		*retdata++ = val;
+		currsize += WORD_SZ;
+
+		/* make sure we stay on 32bit boundary */
+		if ((maxsize - currsize) < WORD_SZ)
+			break;
+	} while (currsize < maxsize);
+
+	clk_disable_unprepare(rng->clk);
+
+	return currsize;
+}
+
+static int msm_rng_init(struct hwrng *hwrng)
+{
+	return msm_rng_enable(hwrng, 1);
+}
+
+static void msm_rng_cleanup(struct hwrng *hwrng)
+{
+	msm_rng_enable(hwrng, 0);
+}
+
+static int msm_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct msm_rng *rng;
+	int ret;
+
+	rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+	if (!rng)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rng);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rng->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rng->base))
+		return PTR_ERR(rng->base);
+
+	rng->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(rng->clk))
+		return PTR_ERR(rng->clk);
+
+	rng->hwrng.name = KBUILD_MODNAME,
+	rng->hwrng.init = msm_rng_init,
+	rng->hwrng.cleanup = msm_rng_cleanup,
+	rng->hwrng.read = msm_rng_read,
+
+	ret = hwrng_register(&rng->hwrng);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register hwrng\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int msm_rng_remove(struct platform_device *pdev)
+{
+	struct msm_rng *rng = platform_get_drvdata(pdev);
+
+	hwrng_unregister(&rng->hwrng);
+	return 0;
+}
+
+static const struct of_device_id msm_rng_of_match[] = {
+	{ .compatible = "qcom,prng", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, msm_rng_of_match);
+
+static struct platform_driver msm_rng_driver = {
+	.probe = msm_rng_probe,
+	.remove = msm_rng_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(msm_rng_of_match),
+	}
+};
+module_platform_driver(msm_rng_driver);
+
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_AUTHOR("The Linux Foundation");
+MODULE_DESCRIPTION("Qualcomm MSM random number generator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c
new file mode 100644
index 0000000..c853e9e
--- /dev/null
+++ b/drivers/char/hw_random/omap3-rom-rng.c
@@ -0,0 +1,141 @@
+/*
+ * omap3-rom-rng.c - RNG driver for TI OMAP3 CPU family
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@solidboot.com>
+ *
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/hw_random.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#define RNG_RESET			0x01
+#define RNG_GEN_PRNG_HW_INIT		0x02
+#define RNG_GEN_HW			0x08
+
+/* param1: ptr, param2: count, param3: flag */
+static u32 (*omap3_rom_rng_call)(u32, u32, u32);
+
+static struct timer_list idle_timer;
+static int rng_idle;
+static struct clk *rng_clk;
+
+static void omap3_rom_rng_idle(unsigned long data)
+{
+	int r;
+
+	r = omap3_rom_rng_call(0, 0, RNG_RESET);
+	if (r != 0) {
+		pr_err("reset failed: %d\n", r);
+		return;
+	}
+	clk_disable_unprepare(rng_clk);
+	rng_idle = 1;
+}
+
+static int omap3_rom_rng_get_random(void *buf, unsigned int count)
+{
+	u32 r;
+	u32 ptr;
+
+	del_timer_sync(&idle_timer);
+	if (rng_idle) {
+		clk_prepare_enable(rng_clk);
+		r = omap3_rom_rng_call(0, 0, RNG_GEN_PRNG_HW_INIT);
+		if (r != 0) {
+			clk_disable_unprepare(rng_clk);
+			pr_err("HW init failed: %d\n", r);
+			return -EIO;
+		}
+		rng_idle = 0;
+	}
+
+	ptr = virt_to_phys(buf);
+	r = omap3_rom_rng_call(ptr, count, RNG_GEN_HW);
+	mod_timer(&idle_timer, jiffies + msecs_to_jiffies(500));
+	if (r != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int omap3_rom_rng_data_present(struct hwrng *rng, int wait)
+{
+	return 1;
+}
+
+static int omap3_rom_rng_data_read(struct hwrng *rng, u32 *data)
+{
+	int r;
+
+	r = omap3_rom_rng_get_random(data, 4);
+	if (r < 0)
+		return r;
+	return 4;
+}
+
+static struct hwrng omap3_rom_rng_ops = {
+	.name		= "omap3-rom",
+	.data_present	= omap3_rom_rng_data_present,
+	.data_read	= omap3_rom_rng_data_read,
+};
+
+static int omap3_rom_rng_probe(struct platform_device *pdev)
+{
+	pr_info("initializing\n");
+
+	omap3_rom_rng_call = pdev->dev.platform_data;
+	if (!omap3_rom_rng_call) {
+		pr_err("omap3_rom_rng_call is NULL\n");
+		return -EINVAL;
+	}
+
+	setup_timer(&idle_timer, omap3_rom_rng_idle, 0);
+	rng_clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(rng_clk)) {
+		pr_err("unable to get RNG clock\n");
+		return PTR_ERR(rng_clk);
+	}
+
+	/* Leave the RNG in reset state. */
+	clk_prepare_enable(rng_clk);
+	omap3_rom_rng_idle(0);
+
+	return hwrng_register(&omap3_rom_rng_ops);
+}
+
+static int omap3_rom_rng_remove(struct platform_device *pdev)
+{
+	hwrng_unregister(&omap3_rom_rng_ops);
+	clk_disable_unprepare(rng_clk);
+	clk_put(rng_clk);
+	return 0;
+}
+
+static struct platform_driver omap3_rom_rng_driver = {
+	.driver = {
+		.name		= "omap3-rom-rng",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= omap3_rom_rng_probe,
+	.remove		= omap3_rom_rng_remove,
+};
+
+module_platform_driver(omap3_rom_rng_driver);
+
+MODULE_ALIAS("platform:omap3-rom-rng");
+MODULE_AUTHOR("Juha Yrjola");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/pseries-rng.c b/drivers/char/hw_random/pseries-rng.c
index b761459a..ab7ffde 100644
--- a/drivers/char/hw_random/pseries-rng.c
+++ b/drivers/char/hw_random/pseries-rng.c
@@ -24,7 +24,6 @@
 #include <linux/hw_random.h>
 #include <asm/vio.h>
 
-#define MODULE_NAME "pseries-rng"
 
 static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
 {
@@ -55,7 +54,7 @@
 };
 
 static struct hwrng pseries_rng = {
-	.name		= MODULE_NAME,
+	.name		= KBUILD_MODNAME,
 	.data_read	= pseries_rng_data_read,
 };
 
@@ -78,7 +77,7 @@
 MODULE_DEVICE_TABLE(vio, pseries_rng_driver_ids);
 
 static struct vio_driver pseries_rng_driver = {
-	.name = MODULE_NAME,
+	.name = KBUILD_MODNAME,
 	.probe = pseries_rng_probe,
 	.remove = pseries_rng_remove,
 	.get_desired_dma = pseries_rng_get_desired_dma,
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index e737772..de5a6dc 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -221,7 +221,7 @@
 module_init(mod_init);
 module_exit(mod_exit);
 
-static struct x86_cpu_id via_rng_cpu_id[] = {
+static struct x86_cpu_id __maybe_unused via_rng_cpu_id[] = {
 	X86_FEATURE_MATCH(X86_FEATURE_XSTORE),
 	{}
 };
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index f2c7506..dfd1643 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -157,4 +157,3 @@
 	pr_debug("%s: failed initialization\n", __func__);
 	return -EINVAL;
 }
-EXPORT_SYMBOL(exynos4210_cpufreq_init);
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 8683304..efad5e6 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -211,4 +211,3 @@
 	pr_debug("%s: failed initialization\n", __func__);
 	return -EINVAL;
 }
-EXPORT_SYMBOL(exynos4x12_cpufreq_init);
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 9fae466..8feda86 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -236,4 +236,3 @@
 	pr_err("%s: failed initialization\n", __func__);
 	return -EINVAL;
 }
-EXPORT_SYMBOL(exynos5250_cpufreq_init);
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index f42df7e..b7309c3 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -142,10 +142,8 @@
 
 	mutex_lock(&tegra_cpu_lock);
 
-	if (is_suspended) {
-		ret = -EBUSY;
+	if (is_suspended)
 		goto out;
-	}
 
 	freq = freq_table[index].frequency;
 
diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
index ca89f6b..e7555ff 100644
--- a/drivers/crypto/caam/Kconfig
+++ b/drivers/crypto/caam/Kconfig
@@ -4,16 +4,29 @@
 	help
 	  Enables the driver module for Freescale's Cryptographic Accelerator
 	  and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
-	  This module adds a job ring operation interface, and configures h/w
+	  This module creates job ring devices, and configures h/w
 	  to operate as a DPAA component automatically, depending
 	  on h/w feature availability.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called caam.
 
+config CRYPTO_DEV_FSL_CAAM_JR
+	tristate "Freescale CAAM Job Ring driver backend"
+	depends on CRYPTO_DEV_FSL_CAAM
+	default y
+	help
+	  Enables the driver module for Job Rings which are part of
+	  Freescale's Cryptographic Accelerator
+	  and Assurance Module (CAAM). This module adds a job ring operation
+	  interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called caam_jr.
+
 config CRYPTO_DEV_FSL_CAAM_RINGSIZE
 	int "Job Ring size"
-	depends on CRYPTO_DEV_FSL_CAAM
+	depends on CRYPTO_DEV_FSL_CAAM_JR
 	range 2 9
 	default "9"
 	help
@@ -31,7 +44,7 @@
 
 config CRYPTO_DEV_FSL_CAAM_INTC
 	bool "Job Ring interrupt coalescing"
-	depends on CRYPTO_DEV_FSL_CAAM
+	depends on CRYPTO_DEV_FSL_CAAM_JR
 	default n
 	help
 	  Enable the Job Ring's interrupt coalescing feature.
@@ -62,7 +75,7 @@
 
 config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
 	tristate "Register algorithm implementations with the Crypto API"
-	depends on CRYPTO_DEV_FSL_CAAM
+	depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
 	default y
 	select CRYPTO_ALGAPI
 	select CRYPTO_AUTHENC
@@ -76,7 +89,7 @@
 
 config CRYPTO_DEV_FSL_CAAM_AHASH_API
 	tristate "Register hash algorithm implementations with Crypto API"
-	depends on CRYPTO_DEV_FSL_CAAM
+	depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
 	default y
 	select CRYPTO_HASH
 	help
@@ -88,7 +101,7 @@
 
 config CRYPTO_DEV_FSL_CAAM_RNG_API
 	tristate "Register caam device for hwrng API"
-	depends on CRYPTO_DEV_FSL_CAAM
+	depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
 	default y
 	select CRYPTO_RNG
 	select HW_RANDOM
diff --git a/drivers/crypto/caam/Makefile b/drivers/crypto/caam/Makefile
index d56bd0e..550758a 100644
--- a/drivers/crypto/caam/Makefile
+++ b/drivers/crypto/caam/Makefile
@@ -6,8 +6,10 @@
 endif
 
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
 obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
 
-caam-objs := ctrl.o jr.o error.o key_gen.o
+caam-objs := ctrl.o
+caam_jr-objs := jr.o key_gen.o error.o
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index 7c63b72..4f44b71 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -86,6 +86,7 @@
 #else
 #define debug(format, arg...)
 #endif
+static struct list_head alg_list;
 
 /* Set DK bit in class 1 operation if shared */
 static inline void append_dec_op1(u32 *desc, u32 type)
@@ -2057,7 +2058,6 @@
 
 struct caam_crypto_alg {
 	struct list_head entry;
-	struct device *ctrldev;
 	int class1_alg_type;
 	int class2_alg_type;
 	int alg_op;
@@ -2070,14 +2070,12 @@
 	struct caam_crypto_alg *caam_alg =
 		 container_of(alg, struct caam_crypto_alg, crypto_alg);
 	struct caam_ctx *ctx = crypto_tfm_ctx(tfm);
-	struct caam_drv_private *priv = dev_get_drvdata(caam_alg->ctrldev);
-	int tgt_jr = atomic_inc_return(&priv->tfm_count);
 
-	/*
-	 * distribute tfms across job rings to ensure in-order
-	 * crypto request processing per tfm
-	 */
-	ctx->jrdev = priv->jrdev[(tgt_jr / 2) % priv->total_jobrs];
+	ctx->jrdev = caam_jr_alloc();
+	if (IS_ERR(ctx->jrdev)) {
+		pr_err("Job Ring Device allocation for transform failed\n");
+		return PTR_ERR(ctx->jrdev);
+	}
 
 	/* copy descriptor header template value */
 	ctx->class1_alg_type = OP_TYPE_CLASS1_ALG | caam_alg->class1_alg_type;
@@ -2104,44 +2102,26 @@
 		dma_unmap_single(ctx->jrdev, ctx->sh_desc_givenc_dma,
 				 desc_bytes(ctx->sh_desc_givenc),
 				 DMA_TO_DEVICE);
+
+	caam_jr_free(ctx->jrdev);
 }
 
 static void __exit caam_algapi_exit(void)
 {
 
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct device *ctrldev;
-	struct caam_drv_private *priv;
 	struct caam_crypto_alg *t_alg, *n;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev)
+	if (!alg_list.next)
 		return;
 
-	ctrldev = &pdev->dev;
-	of_node_put(dev_node);
-	priv = dev_get_drvdata(ctrldev);
-
-	if (!priv->alg_list.next)
-		return;
-
-	list_for_each_entry_safe(t_alg, n, &priv->alg_list, entry) {
+	list_for_each_entry_safe(t_alg, n, &alg_list, entry) {
 		crypto_unregister_alg(&t_alg->crypto_alg);
 		list_del(&t_alg->entry);
 		kfree(t_alg);
 	}
 }
 
-static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev,
-					      struct caam_alg_template
+static struct caam_crypto_alg *caam_alg_alloc(struct caam_alg_template
 					      *template)
 {
 	struct caam_crypto_alg *t_alg;
@@ -2149,7 +2129,7 @@
 
 	t_alg = kzalloc(sizeof(struct caam_crypto_alg), GFP_KERNEL);
 	if (!t_alg) {
-		dev_err(ctrldev, "failed to allocate t_alg\n");
+		pr_err("failed to allocate t_alg\n");
 		return ERR_PTR(-ENOMEM);
 	}
 
@@ -2181,62 +2161,39 @@
 	t_alg->class1_alg_type = template->class1_alg_type;
 	t_alg->class2_alg_type = template->class2_alg_type;
 	t_alg->alg_op = template->alg_op;
-	t_alg->ctrldev = ctrldev;
 
 	return t_alg;
 }
 
 static int __init caam_algapi_init(void)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct device *ctrldev;
-	struct caam_drv_private *priv;
 	int i = 0, err = 0;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return -ENODEV;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev)
-		return -ENODEV;
-
-	ctrldev = &pdev->dev;
-	priv = dev_get_drvdata(ctrldev);
-	of_node_put(dev_node);
-
-	INIT_LIST_HEAD(&priv->alg_list);
-
-	atomic_set(&priv->tfm_count, -1);
+	INIT_LIST_HEAD(&alg_list);
 
 	/* register crypto algorithms the device supports */
 	for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
 		/* TODO: check if h/w supports alg */
 		struct caam_crypto_alg *t_alg;
 
-		t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
+		t_alg = caam_alg_alloc(&driver_algs[i]);
 		if (IS_ERR(t_alg)) {
 			err = PTR_ERR(t_alg);
-			dev_warn(ctrldev, "%s alg allocation failed\n",
-				 driver_algs[i].driver_name);
+			pr_warn("%s alg allocation failed\n",
+				driver_algs[i].driver_name);
 			continue;
 		}
 
 		err = crypto_register_alg(&t_alg->crypto_alg);
 		if (err) {
-			dev_warn(ctrldev, "%s alg registration failed\n",
+			pr_warn("%s alg registration failed\n",
 				t_alg->crypto_alg.cra_driver_name);
 			kfree(t_alg);
 		} else
-			list_add_tail(&t_alg->entry, &priv->alg_list);
+			list_add_tail(&t_alg->entry, &alg_list);
 	}
-	if (!list_empty(&priv->alg_list))
-		dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n",
-			 (char *)of_get_property(dev_node, "compatible", NULL));
+	if (!list_empty(&alg_list))
+		pr_info("caam algorithms registered in /proc/crypto\n");
 
 	return err;
 }
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index e732bd9..0378328 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -94,6 +94,9 @@
 #define debug(format, arg...)
 #endif
 
+
+static struct list_head hash_list;
+
 /* ahash per-session context */
 struct caam_hash_ctx {
 	struct device *jrdev;
@@ -1653,7 +1656,6 @@
 
 struct caam_hash_alg {
 	struct list_head entry;
-	struct device *ctrldev;
 	int alg_type;
 	int alg_op;
 	struct ahash_alg ahash_alg;
@@ -1670,7 +1672,6 @@
 	struct caam_hash_alg *caam_hash =
 		 container_of(alg, struct caam_hash_alg, ahash_alg);
 	struct caam_hash_ctx *ctx = crypto_tfm_ctx(tfm);
-	struct caam_drv_private *priv = dev_get_drvdata(caam_hash->ctrldev);
 	/* Sizes for MDHA running digests: MD5, SHA1, 224, 256, 384, 512 */
 	static const u8 runninglen[] = { HASH_MSG_LEN + MD5_DIGEST_SIZE,
 					 HASH_MSG_LEN + SHA1_DIGEST_SIZE,
@@ -1678,15 +1679,17 @@
 					 HASH_MSG_LEN + SHA256_DIGEST_SIZE,
 					 HASH_MSG_LEN + 64,
 					 HASH_MSG_LEN + SHA512_DIGEST_SIZE };
-	int tgt_jr = atomic_inc_return(&priv->tfm_count);
 	int ret = 0;
 
 	/*
-	 * distribute tfms across job rings to ensure in-order
+	 * Get a Job ring from Job Ring driver to ensure in-order
 	 * crypto request processing per tfm
 	 */
-	ctx->jrdev = priv->jrdev[tgt_jr % priv->total_jobrs];
-
+	ctx->jrdev = caam_jr_alloc();
+	if (IS_ERR(ctx->jrdev)) {
+		pr_err("Job Ring Device allocation for transform failed\n");
+		return PTR_ERR(ctx->jrdev);
+	}
 	/* copy descriptor header template value */
 	ctx->alg_type = OP_TYPE_CLASS2_ALG | caam_hash->alg_type;
 	ctx->alg_op = OP_TYPE_CLASS2_ALG | caam_hash->alg_op;
@@ -1729,35 +1732,18 @@
 	    !dma_mapping_error(ctx->jrdev, ctx->sh_desc_finup_dma))
 		dma_unmap_single(ctx->jrdev, ctx->sh_desc_finup_dma,
 				 desc_bytes(ctx->sh_desc_finup), DMA_TO_DEVICE);
+
+	caam_jr_free(ctx->jrdev);
 }
 
 static void __exit caam_algapi_hash_exit(void)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct device *ctrldev;
-	struct caam_drv_private *priv;
 	struct caam_hash_alg *t_alg, *n;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev)
+	if (!hash_list.next)
 		return;
 
-	ctrldev = &pdev->dev;
-	of_node_put(dev_node);
-	priv = dev_get_drvdata(ctrldev);
-
-	if (!priv->hash_list.next)
-		return;
-
-	list_for_each_entry_safe(t_alg, n, &priv->hash_list, entry) {
+	list_for_each_entry_safe(t_alg, n, &hash_list, entry) {
 		crypto_unregister_ahash(&t_alg->ahash_alg);
 		list_del(&t_alg->entry);
 		kfree(t_alg);
@@ -1765,7 +1751,7 @@
 }
 
 static struct caam_hash_alg *
-caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template,
+caam_hash_alloc(struct caam_hash_template *template,
 		bool keyed)
 {
 	struct caam_hash_alg *t_alg;
@@ -1774,7 +1760,7 @@
 
 	t_alg = kzalloc(sizeof(struct caam_hash_alg), GFP_KERNEL);
 	if (!t_alg) {
-		dev_err(ctrldev, "failed to allocate t_alg\n");
+		pr_err("failed to allocate t_alg\n");
 		return ERR_PTR(-ENOMEM);
 	}
 
@@ -1805,37 +1791,15 @@
 
 	t_alg->alg_type = template->alg_type;
 	t_alg->alg_op = template->alg_op;
-	t_alg->ctrldev = ctrldev;
 
 	return t_alg;
 }
 
 static int __init caam_algapi_hash_init(void)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct device *ctrldev;
-	struct caam_drv_private *priv;
 	int i = 0, err = 0;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return -ENODEV;
-	}
-
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev)
-		return -ENODEV;
-
-	ctrldev = &pdev->dev;
-	priv = dev_get_drvdata(ctrldev);
-	of_node_put(dev_node);
-
-	INIT_LIST_HEAD(&priv->hash_list);
-
-	atomic_set(&priv->tfm_count, -1);
+	INIT_LIST_HEAD(&hash_list);
 
 	/* register crypto algorithms the device supports */
 	for (i = 0; i < ARRAY_SIZE(driver_hash); i++) {
@@ -1843,38 +1807,38 @@
 		struct caam_hash_alg *t_alg;
 
 		/* register hmac version */
-		t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], true);
+		t_alg = caam_hash_alloc(&driver_hash[i], true);
 		if (IS_ERR(t_alg)) {
 			err = PTR_ERR(t_alg);
-			dev_warn(ctrldev, "%s alg allocation failed\n",
-				 driver_hash[i].driver_name);
+			pr_warn("%s alg allocation failed\n",
+				driver_hash[i].driver_name);
 			continue;
 		}
 
 		err = crypto_register_ahash(&t_alg->ahash_alg);
 		if (err) {
-			dev_warn(ctrldev, "%s alg registration failed\n",
+			pr_warn("%s alg registration failed\n",
 				t_alg->ahash_alg.halg.base.cra_driver_name);
 			kfree(t_alg);
 		} else
-			list_add_tail(&t_alg->entry, &priv->hash_list);
+			list_add_tail(&t_alg->entry, &hash_list);
 
 		/* register unkeyed version */
-		t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], false);
+		t_alg = caam_hash_alloc(&driver_hash[i], false);
 		if (IS_ERR(t_alg)) {
 			err = PTR_ERR(t_alg);
-			dev_warn(ctrldev, "%s alg allocation failed\n",
-				 driver_hash[i].driver_name);
+			pr_warn("%s alg allocation failed\n",
+				driver_hash[i].driver_name);
 			continue;
 		}
 
 		err = crypto_register_ahash(&t_alg->ahash_alg);
 		if (err) {
-			dev_warn(ctrldev, "%s alg registration failed\n",
+			pr_warn("%s alg registration failed\n",
 				t_alg->ahash_alg.halg.base.cra_driver_name);
 			kfree(t_alg);
 		} else
-			list_add_tail(&t_alg->entry, &priv->hash_list);
+			list_add_tail(&t_alg->entry, &hash_list);
 	}
 
 	return err;
diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c
index d1939a9..28486b1 100644
--- a/drivers/crypto/caam/caamrng.c
+++ b/drivers/crypto/caam/caamrng.c
@@ -273,34 +273,23 @@
 
 static void __exit caam_rng_exit(void)
 {
+	caam_jr_free(rng_ctx.jrdev);
 	hwrng_unregister(&caam_rng);
 }
 
 static int __init caam_rng_init(void)
 {
-	struct device_node *dev_node;
-	struct platform_device *pdev;
-	struct device *ctrldev;
-	struct caam_drv_private *priv;
+	struct device *dev;
 
-	dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
-	if (!dev_node) {
-		dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
-		if (!dev_node)
-			return -ENODEV;
+	dev = caam_jr_alloc();
+	if (IS_ERR(dev)) {
+		pr_err("Job Ring Device allocation for transform failed\n");
+		return PTR_ERR(dev);
 	}
 
-	pdev = of_find_device_by_node(dev_node);
-	if (!pdev)
-		return -ENODEV;
+	caam_init_rng(&rng_ctx, dev);
 
-	ctrldev = &pdev->dev;
-	priv = dev_get_drvdata(ctrldev);
-	of_node_put(dev_node);
-
-	caam_init_rng(&rng_ctx, priv->jrdev[0]);
-
-	dev_info(priv->jrdev[0], "registering rng-caam\n");
+	dev_info(dev, "registering rng-caam\n");
 	return hwrng_register(&caam_rng);
 }
 
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index bc6d820..63fb1af 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -16,82 +16,75 @@
 #include "error.h"
 #include "ctrl.h"
 
-static int caam_remove(struct platform_device *pdev)
-{
-	struct device *ctrldev;
-	struct caam_drv_private *ctrlpriv;
-	struct caam_drv_private_jr *jrpriv;
-	struct caam_full __iomem *topregs;
-	int ring, ret = 0;
-
-	ctrldev = &pdev->dev;
-	ctrlpriv = dev_get_drvdata(ctrldev);
-	topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
-
-	/* shut down JobRs */
-	for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
-		ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]);
-		jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]);
-		irq_dispose_mapping(jrpriv->irq);
-	}
-
-	/* Shut down debug views */
-#ifdef CONFIG_DEBUG_FS
-	debugfs_remove_recursive(ctrlpriv->dfs_root);
-#endif
-
-	/* Unmap controller region */
-	iounmap(&topregs->ctrl);
-
-	kfree(ctrlpriv->jrdev);
-	kfree(ctrlpriv);
-
-	return ret;
-}
-
 /*
  * Descriptor to instantiate RNG State Handle 0 in normal mode and
  * load the JDKEK, TDKEK and TDSK registers
  */
-static void build_instantiation_desc(u32 *desc)
+static void build_instantiation_desc(u32 *desc, int handle, int do_sk)
 {
-	u32 *jump_cmd;
+	u32 *jump_cmd, op_flags;
 
 	init_job_desc(desc, 0);
 
+	op_flags = OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+			(handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INIT;
+
 	/* INIT RNG in non-test mode */
-	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
-			 OP_ALG_AS_INIT);
+	append_operation(desc, op_flags);
 
-	/* wait for done */
-	jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
-	set_jump_tgt_here(desc, jump_cmd);
+	if (!handle && do_sk) {
+		/*
+		 * For SH0, Secure Keys must be generated as well
+		 */
 
-	/*
-	 * load 1 to clear written reg:
-	 * resets the done interrupt and returns the RNG to idle.
-	 */
-	append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+		/* wait for done */
+		jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
+		set_jump_tgt_here(desc, jump_cmd);
 
-	/* generate secure keys (non-test) */
-	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
-			 OP_ALG_RNG4_SK);
+		/*
+		 * load 1 to clear written reg:
+		 * resets the done interrrupt and returns the RNG to idle.
+		 */
+		append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+
+		/* Initialize State Handle  */
+		append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+				 OP_ALG_AAI_RNG4_SK);
+	}
+
+	append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT);
 }
 
-static int instantiate_rng(struct device *ctrldev)
+/* Descriptor for deinstantiation of State Handle 0 of the RNG block. */
+static void build_deinstantiation_desc(u32 *desc, int handle)
+{
+	init_job_desc(desc, 0);
+
+	/* Uninstantiate State Handle 0 */
+	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+			 (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INITFINAL);
+
+	append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT);
+}
+
+/*
+ * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of
+ *			  the software (no JR/QI used).
+ * @ctrldev - pointer to device
+ * @status - descriptor status, after being run
+ *
+ * Return: - 0 if no error occurred
+ *	   - -ENODEV if the DECO couldn't be acquired
+ *	   - -EAGAIN if an error occurred while executing the descriptor
+ */
+static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc,
+					u32 *status)
 {
 	struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
 	struct caam_full __iomem *topregs;
 	unsigned int timeout = 100000;
-	u32 *desc;
-	int i, ret = 0;
-
-	desc = kmalloc(CAAM_CMD_SZ * 6, GFP_KERNEL | GFP_DMA);
-	if (!desc) {
-		dev_err(ctrldev, "can't allocate RNG init descriptor memory\n");
-		return -ENOMEM;
-	}
-	build_instantiation_desc(desc);
+	u32 deco_dbg_reg, flags;
+	int i;
 
 	/* Set the bit to request direct access to DECO0 */
 	topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
@@ -103,36 +96,219 @@
 
 	if (!timeout) {
 		dev_err(ctrldev, "failed to acquire DECO 0\n");
-		ret = -EIO;
-		goto out;
+		clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
+		return -ENODEV;
 	}
 
 	for (i = 0; i < desc_len(desc); i++)
-		topregs->deco.descbuf[i] = *(desc + i);
+		wr_reg32(&topregs->deco.descbuf[i], *(desc + i));
 
-	wr_reg32(&topregs->deco.jr_ctl_hi, DECO_JQCR_WHL | DECO_JQCR_FOUR);
+	flags = DECO_JQCR_WHL;
+	/*
+	 * If the descriptor length is longer than 4 words, then the
+	 * FOUR bit in JRCTRL register must be set.
+	 */
+	if (desc_len(desc) >= 4)
+		flags |= DECO_JQCR_FOUR;
+
+	/* Instruct the DECO to execute it */
+	wr_reg32(&topregs->deco.jr_ctl_hi, flags);
 
 	timeout = 10000000;
-	while ((rd_reg32(&topregs->deco.desc_dbg) & DECO_DBG_VALID) &&
-								 --timeout)
+	do {
+		deco_dbg_reg = rd_reg32(&topregs->deco.desc_dbg);
+		/*
+		 * If an error occured in the descriptor, then
+		 * the DECO status field will be set to 0x0D
+		 */
+		if ((deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) ==
+		    DESC_DBG_DECO_STAT_HOST_ERR)
+			break;
 		cpu_relax();
+	} while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout);
 
-	if (!timeout) {
-		dev_err(ctrldev, "failed to instantiate RNG\n");
-		ret = -EIO;
+	*status = rd_reg32(&topregs->deco.op_status_hi) &
+		  DECO_OP_STATUS_HI_ERR_MASK;
+
+	/* Mark the DECO as free */
+	clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
+
+	if (!timeout)
+		return -EAGAIN;
+
+	return 0;
+}
+
+/*
+ * instantiate_rng - builds and executes a descriptor on DECO0,
+ *		     which initializes the RNG block.
+ * @ctrldev - pointer to device
+ * @state_handle_mask - bitmask containing the instantiation status
+ *			for the RNG4 state handles which exist in
+ *			the RNG4 block: 1 if it's been instantiated
+ *			by an external entry, 0 otherwise.
+ * @gen_sk  - generate data to be loaded into the JDKEK, TDKEK and TDSK;
+ *	      Caution: this can be done only once; if the keys need to be
+ *	      regenerated, a POR is required
+ *
+ * Return: - 0 if no error occurred
+ *	   - -ENOMEM if there isn't enough memory to allocate the descriptor
+ *	   - -ENODEV if DECO0 couldn't be acquired
+ *	   - -EAGAIN if an error occurred when executing the descriptor
+ *	      f.i. there was a RNG hardware error due to not "good enough"
+ *	      entropy being aquired.
+ */
+static int instantiate_rng(struct device *ctrldev, int state_handle_mask,
+			   int gen_sk)
+{
+	struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
+	struct caam_full __iomem *topregs;
+	struct rng4tst __iomem *r4tst;
+	u32 *desc, status, rdsta_val;
+	int ret = 0, sh_idx;
+
+	topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+	r4tst = &topregs->ctrl.r4tst[0];
+
+	desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL);
+	if (!desc)
+		return -ENOMEM;
+
+	for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+		/*
+		 * If the corresponding bit is set, this state handle
+		 * was initialized by somebody else, so it's left alone.
+		 */
+		if ((1 << sh_idx) & state_handle_mask)
+			continue;
+
+		/* Create the descriptor for instantiating RNG State Handle */
+		build_instantiation_desc(desc, sh_idx, gen_sk);
+
+		/* Try to run it through DECO0 */
+		ret = run_descriptor_deco0(ctrldev, desc, &status);
+
+		/*
+		 * If ret is not 0, or descriptor status is not 0, then
+		 * something went wrong. No need to try the next state
+		 * handle (if available), bail out here.
+		 * Also, if for some reason, the State Handle didn't get
+		 * instantiated although the descriptor has finished
+		 * without any error (HW optimizations for later
+		 * CAAM eras), then try again.
+		 */
+		rdsta_val =
+			rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IFMASK;
+		if (status || !(rdsta_val & (1 << sh_idx)))
+			ret = -EAGAIN;
+		if (ret)
+			break;
+
+		dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx);
+		/* Clear the contents before recreating the descriptor */
+		memset(desc, 0x00, CAAM_CMD_SZ * 7);
 	}
 
-	clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
-out:
 	kfree(desc);
+
 	return ret;
 }
 
 /*
- * By default, the TRNG runs for 200 clocks per sample;
- * 1600 clocks per sample generates better entropy.
+ * deinstantiate_rng - builds and executes a descriptor on DECO0,
+ *		       which deinitializes the RNG block.
+ * @ctrldev - pointer to device
+ * @state_handle_mask - bitmask containing the instantiation status
+ *			for the RNG4 state handles which exist in
+ *			the RNG4 block: 1 if it's been instantiated
+ *
+ * Return: - 0 if no error occurred
+ *	   - -ENOMEM if there isn't enough memory to allocate the descriptor
+ *	   - -ENODEV if DECO0 couldn't be acquired
+ *	   - -EAGAIN if an error occurred when executing the descriptor
  */
-static void kick_trng(struct platform_device *pdev)
+static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask)
+{
+	u32 *desc, status;
+	int sh_idx, ret = 0;
+
+	desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL);
+	if (!desc)
+		return -ENOMEM;
+
+	for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+		/*
+		 * If the corresponding bit is set, then it means the state
+		 * handle was initialized by us, and thus it needs to be
+		 * deintialized as well
+		 */
+		if ((1 << sh_idx) & state_handle_mask) {
+			/*
+			 * Create the descriptor for deinstantating this state
+			 * handle
+			 */
+			build_deinstantiation_desc(desc, sh_idx);
+
+			/* Try to run it through DECO0 */
+			ret = run_descriptor_deco0(ctrldev, desc, &status);
+
+			if (ret || status) {
+				dev_err(ctrldev,
+					"Failed to deinstantiate RNG4 SH%d\n",
+					sh_idx);
+				break;
+			}
+			dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx);
+		}
+	}
+
+	kfree(desc);
+
+	return ret;
+}
+
+static int caam_remove(struct platform_device *pdev)
+{
+	struct device *ctrldev;
+	struct caam_drv_private *ctrlpriv;
+	struct caam_full __iomem *topregs;
+	int ring, ret = 0;
+
+	ctrldev = &pdev->dev;
+	ctrlpriv = dev_get_drvdata(ctrldev);
+	topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+
+	/* Remove platform devices for JobRs */
+	for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
+		if (ctrlpriv->jrpdev[ring])
+			of_device_unregister(ctrlpriv->jrpdev[ring]);
+	}
+
+	/* De-initialize RNG state handles initialized by this driver. */
+	if (ctrlpriv->rng4_sh_init)
+		deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init);
+
+	/* Shut down debug views */
+#ifdef CONFIG_DEBUG_FS
+	debugfs_remove_recursive(ctrlpriv->dfs_root);
+#endif
+
+	/* Unmap controller region */
+	iounmap(&topregs->ctrl);
+
+	kfree(ctrlpriv->jrpdev);
+	kfree(ctrlpriv);
+
+	return ret;
+}
+
+/*
+ * kick_trng - sets the various parameters for enabling the initialization
+ *	       of the RNG4 block in CAAM
+ * @pdev - pointer to the platform device
+ * @ent_delay - Defines the length (in system clocks) of each entropy sample.
+ */
+static void kick_trng(struct platform_device *pdev, int ent_delay)
 {
 	struct device *ctrldev = &pdev->dev;
 	struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
@@ -145,14 +321,31 @@
 
 	/* put RNG4 into program mode */
 	setbits32(&r4tst->rtmctl, RTMCTL_PRGM);
-	/* 1600 clocks per sample */
+
+	/*
+	 * Performance-wise, it does not make sense to
+	 * set the delay to a value that is lower
+	 * than the last one that worked (i.e. the state handles
+	 * were instantiated properly. Thus, instead of wasting
+	 * time trying to set the values controlling the sample
+	 * frequency, the function simply returns.
+	 */
+	val = (rd_reg32(&r4tst->rtsdctl) & RTSDCTL_ENT_DLY_MASK)
+	      >> RTSDCTL_ENT_DLY_SHIFT;
+	if (ent_delay <= val) {
+		/* put RNG4 into run mode */
+		clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
+		return;
+	}
+
 	val = rd_reg32(&r4tst->rtsdctl);
-	val = (val & ~RTSDCTL_ENT_DLY_MASK) | (1600 << RTSDCTL_ENT_DLY_SHIFT);
+	val = (val & ~RTSDCTL_ENT_DLY_MASK) |
+	      (ent_delay << RTSDCTL_ENT_DLY_SHIFT);
 	wr_reg32(&r4tst->rtsdctl, val);
-	/* min. freq. count */
-	wr_reg32(&r4tst->rtfrqmin, 400);
-	/* max. freq. count */
-	wr_reg32(&r4tst->rtfrqmax, 6400);
+	/* min. freq. count, equal to 1/4 of the entropy sample length */
+	wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
+	/* max. freq. count, equal to 8 times the entropy sample length */
+	wr_reg32(&r4tst->rtfrqmax, ent_delay << 3);
 	/* put RNG4 into run mode */
 	clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
 }
@@ -193,7 +386,7 @@
 /* Probe routine for CAAM top (controller) level */
 static int caam_probe(struct platform_device *pdev)
 {
-	int ret, ring, rspec;
+	int ret, ring, rspec, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
 	u64 caam_id;
 	struct device *dev;
 	struct device_node *nprop, *np;
@@ -258,8 +451,9 @@
 			rspec++;
 	}
 
-	ctrlpriv->jrdev = kzalloc(sizeof(struct device *) * rspec, GFP_KERNEL);
-	if (ctrlpriv->jrdev == NULL) {
+	ctrlpriv->jrpdev = kzalloc(sizeof(struct platform_device *) * rspec,
+								GFP_KERNEL);
+	if (ctrlpriv->jrpdev == NULL) {
 		iounmap(&topregs->ctrl);
 		return -ENOMEM;
 	}
@@ -267,13 +461,24 @@
 	ring = 0;
 	ctrlpriv->total_jobrs = 0;
 	for_each_compatible_node(np, NULL, "fsl,sec-v4.0-job-ring") {
-		caam_jr_probe(pdev, np, ring);
+		ctrlpriv->jrpdev[ring] =
+				of_platform_device_create(np, NULL, dev);
+		if (!ctrlpriv->jrpdev[ring]) {
+			pr_warn("JR%d Platform device creation error\n", ring);
+			continue;
+		}
 		ctrlpriv->total_jobrs++;
 		ring++;
 	}
 	if (!ring) {
 		for_each_compatible_node(np, NULL, "fsl,sec4.0-job-ring") {
-			caam_jr_probe(pdev, np, ring);
+			ctrlpriv->jrpdev[ring] =
+				of_platform_device_create(np, NULL, dev);
+			if (!ctrlpriv->jrpdev[ring]) {
+				pr_warn("JR%d Platform device creation error\n",
+					ring);
+				continue;
+			}
 			ctrlpriv->total_jobrs++;
 			ring++;
 		}
@@ -299,16 +504,55 @@
 
 	/*
 	 * If SEC has RNG version >= 4 and RNG state handle has not been
-	 * already instantiated ,do RNG instantiation
+	 * already instantiated, do RNG instantiation
 	 */
-	if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4 &&
-	    !(rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IF0)) {
-		kick_trng(pdev);
-		ret = instantiate_rng(dev);
+	if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4) {
+		ctrlpriv->rng4_sh_init =
+			rd_reg32(&topregs->ctrl.r4tst[0].rdsta);
+		/*
+		 * If the secure keys (TDKEK, JDKEK, TDSK), were already
+		 * generated, signal this to the function that is instantiating
+		 * the state handles. An error would occur if RNG4 attempts
+		 * to regenerate these keys before the next POR.
+		 */
+		gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1;
+		ctrlpriv->rng4_sh_init &= RDSTA_IFMASK;
+		do {
+			int inst_handles =
+				rd_reg32(&topregs->ctrl.r4tst[0].rdsta) &
+								RDSTA_IFMASK;
+			/*
+			 * If either SH were instantiated by somebody else
+			 * (e.g. u-boot) then it is assumed that the entropy
+			 * parameters are properly set and thus the function
+			 * setting these (kick_trng(...)) is skipped.
+			 * Also, if a handle was instantiated, do not change
+			 * the TRNG parameters.
+			 */
+			if (!(ctrlpriv->rng4_sh_init || inst_handles)) {
+				kick_trng(pdev, ent_delay);
+				ent_delay += 400;
+			}
+			/*
+			 * if instantiate_rng(...) fails, the loop will rerun
+			 * and the kick_trng(...) function will modfiy the
+			 * upper and lower limits of the entropy sampling
+			 * interval, leading to a sucessful initialization of
+			 * the RNG.
+			 */
+			ret = instantiate_rng(dev, inst_handles,
+					      gen_sk);
+		} while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
 		if (ret) {
+			dev_err(dev, "failed to instantiate RNG");
 			caam_remove(pdev);
 			return ret;
 		}
+		/*
+		 * Set handles init'ed by this module as the complement of the
+		 * already initialized ones
+		 */
+		ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_IFMASK;
 
 		/* Enable RDB bit so that RNG works faster */
 		setbits32(&topregs->ctrl.scfgr, SCFGR_RDBENABLE);
diff --git a/drivers/crypto/caam/desc.h b/drivers/crypto/caam/desc.h
index 53b296f..7e4500f 100644
--- a/drivers/crypto/caam/desc.h
+++ b/drivers/crypto/caam/desc.h
@@ -1155,8 +1155,15 @@
 
 /* randomizer AAI set */
 #define OP_ALG_AAI_RNG		(0x00 << OP_ALG_AAI_SHIFT)
-#define OP_ALG_AAI_RNG_NOZERO	(0x10 << OP_ALG_AAI_SHIFT)
-#define OP_ALG_AAI_RNG_ODD	(0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_NZB	(0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_OBP	(0x20 << OP_ALG_AAI_SHIFT)
+
+/* RNG4 AAI set */
+#define OP_ALG_AAI_RNG4_SH_0	(0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SH_1	(0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_PS	(0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_AI	(0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SK	(0x100 << OP_ALG_AAI_SHIFT)
 
 /* hmac/smac AAI set */
 #define OP_ALG_AAI_HASH		(0x00 << OP_ALG_AAI_SHIFT)
@@ -1178,12 +1185,6 @@
 #define OP_ALG_AAI_GSM		(0x10 << OP_ALG_AAI_SHIFT)
 #define OP_ALG_AAI_EDGE		(0x20 << OP_ALG_AAI_SHIFT)
 
-/* RNG4 set */
-#define OP_ALG_RNG4_SHIFT	4
-#define OP_ALG_RNG4_MASK	(0x1f3 << OP_ALG_RNG4_SHIFT)
-
-#define OP_ALG_RNG4_SK		(0x100 << OP_ALG_RNG4_SHIFT)
-
 #define OP_ALG_AS_SHIFT		2
 #define OP_ALG_AS_MASK		(0x3 << OP_ALG_AS_SHIFT)
 #define OP_ALG_AS_UPDATE	(0 << OP_ALG_AS_SHIFT)
diff --git a/drivers/crypto/caam/intern.h b/drivers/crypto/caam/intern.h
index 34c4b9f..6d85fcc 100644
--- a/drivers/crypto/caam/intern.h
+++ b/drivers/crypto/caam/intern.h
@@ -37,13 +37,16 @@
 
 /* Private sub-storage for a single JobR */
 struct caam_drv_private_jr {
-	struct device *parentdev;	/* points back to controller dev */
-	struct platform_device *jr_pdev;/* points to platform device for JR */
+	struct list_head	list_node;	/* Job Ring device list */
+	struct device		*dev;
 	int ridx;
 	struct caam_job_ring __iomem *rregs;	/* JobR's register space */
 	struct tasklet_struct irqtask;
 	int irq;			/* One per queue */
 
+	/* Number of scatterlist crypt transforms active on the JobR */
+	atomic_t tfm_count ____cacheline_aligned;
+
 	/* Job ring info */
 	int ringsize;	/* Size of rings (assume input = output) */
 	struct caam_jrentry_info *entinfo;	/* Alloc'ed 1 per ring entry */
@@ -63,7 +66,7 @@
 struct caam_drv_private {
 
 	struct device *dev;
-	struct device **jrdev; /* Alloc'ed array per sub-device */
+	struct platform_device **jrpdev; /* Alloc'ed array per sub-device */
 	struct platform_device *pdev;
 
 	/* Physical-presence section */
@@ -80,12 +83,11 @@
 	u8 qi_present;		/* Nonzero if QI present in device */
 	int secvio_irq;		/* Security violation interrupt number */
 
-	/* which jr allocated to scatterlist crypto */
-	atomic_t tfm_count ____cacheline_aligned;
-	/* list of registered crypto algorithms (mk generic context handle?) */
-	struct list_head alg_list;
-	/* list of registered hash algorithms (mk generic context handle?) */
-	struct list_head hash_list;
+#define	RNG4_MAX_HANDLES 2
+	/* RNG4 block */
+	u32 rng4_sh_init;	/* This bitmap shows which of the State
+				   Handles of the RNG4 block are initialized
+				   by this driver */
 
 	/*
 	 * debugfs entries for developer view into driver/device
diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index bdb786d..d23356d2 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -13,6 +13,113 @@
 #include "desc.h"
 #include "intern.h"
 
+struct jr_driver_data {
+	/* List of Physical JobR's with the Driver */
+	struct list_head	jr_list;
+	spinlock_t		jr_alloc_lock;	/* jr_list lock */
+} ____cacheline_aligned;
+
+static struct jr_driver_data driver_data;
+
+static int caam_reset_hw_jr(struct device *dev)
+{
+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+	unsigned int timeout = 100000;
+
+	/*
+	 * mask interrupts since we are going to poll
+	 * for reset completion status
+	 */
+	setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+	/* initiate flush (required prior to reset) */
+	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+	while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
+		JRINT_ERR_HALT_INPROGRESS) && --timeout)
+		cpu_relax();
+
+	if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
+	    JRINT_ERR_HALT_COMPLETE || timeout == 0) {
+		dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
+		return -EIO;
+	}
+
+	/* initiate reset */
+	timeout = 100000;
+	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+	while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
+		cpu_relax();
+
+	if (timeout == 0) {
+		dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
+		return -EIO;
+	}
+
+	/* unmask interrupts */
+	clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+	return 0;
+}
+
+/*
+ * Shutdown JobR independent of platform property code
+ */
+int caam_jr_shutdown(struct device *dev)
+{
+	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+	dma_addr_t inpbusaddr, outbusaddr;
+	int ret;
+
+	ret = caam_reset_hw_jr(dev);
+
+	tasklet_kill(&jrp->irqtask);
+
+	/* Release interrupt */
+	free_irq(jrp->irq, dev);
+
+	/* Free rings */
+	inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
+	outbusaddr = rd_reg64(&jrp->rregs->outring_base);
+	dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH,
+			  jrp->inpring, inpbusaddr);
+	dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH,
+			  jrp->outring, outbusaddr);
+	kfree(jrp->entinfo);
+
+	return ret;
+}
+
+static int caam_jr_remove(struct platform_device *pdev)
+{
+	int ret;
+	struct device *jrdev;
+	struct caam_drv_private_jr *jrpriv;
+
+	jrdev = &pdev->dev;
+	jrpriv = dev_get_drvdata(jrdev);
+
+	/*
+	 * Return EBUSY if job ring already allocated.
+	 */
+	if (atomic_read(&jrpriv->tfm_count)) {
+		dev_err(jrdev, "Device is busy\n");
+		return -EBUSY;
+	}
+
+	/* Remove the node from Physical JobR list maintained by driver */
+	spin_lock(&driver_data.jr_alloc_lock);
+	list_del(&jrpriv->list_node);
+	spin_unlock(&driver_data.jr_alloc_lock);
+
+	/* Release ring */
+	ret = caam_jr_shutdown(jrdev);
+	if (ret)
+		dev_err(jrdev, "Failed to shut down job ring\n");
+	irq_dispose_mapping(jrpriv->irq);
+
+	return ret;
+}
+
 /* Main per-ring interrupt handler */
 static irqreturn_t caam_jr_interrupt(int irq, void *st_dev)
 {
@@ -128,6 +235,59 @@
 }
 
 /**
+ * caam_jr_alloc() - Alloc a job ring for someone to use as needed.
+ *
+ * returns :  pointer to the newly allocated physical
+ *	      JobR dev can be written to if successful.
+ **/
+struct device *caam_jr_alloc(void)
+{
+	struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
+	struct device *dev = NULL;
+	int min_tfm_cnt	= INT_MAX;
+	int tfm_cnt;
+
+	spin_lock(&driver_data.jr_alloc_lock);
+
+	if (list_empty(&driver_data.jr_list)) {
+		spin_unlock(&driver_data.jr_alloc_lock);
+		return ERR_PTR(-ENODEV);
+	}
+
+	list_for_each_entry(jrpriv, &driver_data.jr_list, list_node) {
+		tfm_cnt = atomic_read(&jrpriv->tfm_count);
+		if (tfm_cnt < min_tfm_cnt) {
+			min_tfm_cnt = tfm_cnt;
+			min_jrpriv = jrpriv;
+		}
+		if (!min_tfm_cnt)
+			break;
+	}
+
+	if (min_jrpriv) {
+		atomic_inc(&min_jrpriv->tfm_count);
+		dev = min_jrpriv->dev;
+	}
+	spin_unlock(&driver_data.jr_alloc_lock);
+
+	return dev;
+}
+EXPORT_SYMBOL(caam_jr_alloc);
+
+/**
+ * caam_jr_free() - Free the Job Ring
+ * @rdev     - points to the dev that identifies the Job ring to
+ *             be released.
+ **/
+void caam_jr_free(struct device *rdev)
+{
+	struct caam_drv_private_jr *jrpriv = dev_get_drvdata(rdev);
+
+	atomic_dec(&jrpriv->tfm_count);
+}
+EXPORT_SYMBOL(caam_jr_free);
+
+/**
  * caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK,
  * -EBUSY if the queue is full, -EIO if it cannot map the caller's
  * descriptor.
@@ -207,46 +367,6 @@
 }
 EXPORT_SYMBOL(caam_jr_enqueue);
 
-static int caam_reset_hw_jr(struct device *dev)
-{
-	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-	unsigned int timeout = 100000;
-
-	/*
-	 * mask interrupts since we are going to poll
-	 * for reset completion status
-	 */
-	setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
-
-	/* initiate flush (required prior to reset) */
-	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
-	while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
-		JRINT_ERR_HALT_INPROGRESS) && --timeout)
-		cpu_relax();
-
-	if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
-	    JRINT_ERR_HALT_COMPLETE || timeout == 0) {
-		dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
-		return -EIO;
-	}
-
-	/* initiate reset */
-	timeout = 100000;
-	wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
-	while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
-		cpu_relax();
-
-	if (timeout == 0) {
-		dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
-		return -EIO;
-	}
-
-	/* unmask interrupts */
-	clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
-
-	return 0;
-}
-
 /*
  * Init JobR independent of platform property detection
  */
@@ -262,7 +382,7 @@
 
 	/* Connect job ring interrupt handler. */
 	error = request_irq(jrp->irq, caam_jr_interrupt, IRQF_SHARED,
-			    "caam-jobr", dev);
+			    dev_name(dev), dev);
 	if (error) {
 		dev_err(dev, "can't connect JobR %d interrupt (%d)\n",
 			jrp->ridx, jrp->irq);
@@ -318,86 +438,43 @@
 	return 0;
 }
 
-/*
- * Shutdown JobR independent of platform property code
- */
-int caam_jr_shutdown(struct device *dev)
-{
-	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
-	dma_addr_t inpbusaddr, outbusaddr;
-	int ret;
-
-	ret = caam_reset_hw_jr(dev);
-
-	tasklet_kill(&jrp->irqtask);
-
-	/* Release interrupt */
-	free_irq(jrp->irq, dev);
-
-	/* Free rings */
-	inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
-	outbusaddr = rd_reg64(&jrp->rregs->outring_base);
-	dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH,
-			  jrp->inpring, inpbusaddr);
-	dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH,
-			  jrp->outring, outbusaddr);
-	kfree(jrp->entinfo);
-	of_device_unregister(jrp->jr_pdev);
-
-	return ret;
-}
 
 /*
- * Probe routine for each detected JobR subsystem. It assumes that
- * property detection was picked up externally.
+ * Probe routine for each detected JobR subsystem.
  */
-int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
-		  int ring)
+static int caam_jr_probe(struct platform_device *pdev)
 {
-	struct device *ctrldev, *jrdev;
-	struct platform_device *jr_pdev;
-	struct caam_drv_private *ctrlpriv;
+	struct device *jrdev;
+	struct device_node *nprop;
+	struct caam_job_ring __iomem *ctrl;
 	struct caam_drv_private_jr *jrpriv;
-	u32 *jroffset;
+	static int total_jobrs;
 	int error;
 
-	ctrldev = &pdev->dev;
-	ctrlpriv = dev_get_drvdata(ctrldev);
-
+	jrdev = &pdev->dev;
 	jrpriv = kmalloc(sizeof(struct caam_drv_private_jr),
 			 GFP_KERNEL);
-	if (jrpriv == NULL) {
-		dev_err(ctrldev, "can't alloc private mem for job ring %d\n",
-			ring);
+	if (!jrpriv)
+		return -ENOMEM;
+
+	dev_set_drvdata(jrdev, jrpriv);
+
+	/* save ring identity relative to detection */
+	jrpriv->ridx = total_jobrs++;
+
+	nprop = pdev->dev.of_node;
+	/* Get configuration properties from device tree */
+	/* First, get register page */
+	ctrl = of_iomap(nprop, 0);
+	if (!ctrl) {
+		dev_err(jrdev, "of_iomap() failed\n");
 		return -ENOMEM;
 	}
-	jrpriv->parentdev = ctrldev; /* point back to parent */
-	jrpriv->ridx = ring; /* save ring identity relative to detection */
 
-	/*
-	 * Derive a pointer to the detected JobRs regs
-	 * Driver has already iomapped the entire space, we just
-	 * need to add in the offset to this JobR. Don't know if I
-	 * like this long-term, but it'll run
-	 */
-	jroffset = (u32 *)of_get_property(np, "reg", NULL);
-	jrpriv->rregs = (struct caam_job_ring __iomem *)((void *)ctrlpriv->ctrl
-							 + *jroffset);
-
-	/* Build a local dev for each detected queue */
-	jr_pdev = of_platform_device_create(np, NULL, ctrldev);
-	if (jr_pdev == NULL) {
-		kfree(jrpriv);
-		return -EINVAL;
-	}
-
-	jrpriv->jr_pdev = jr_pdev;
-	jrdev = &jr_pdev->dev;
-	dev_set_drvdata(jrdev, jrpriv);
-	ctrlpriv->jrdev[ring] = jrdev;
+	jrpriv->rregs = (struct caam_job_ring __force *)ctrl;
 
 	if (sizeof(dma_addr_t) == sizeof(u64))
-		if (of_device_is_compatible(np, "fsl,sec-v5.0-job-ring"))
+		if (of_device_is_compatible(nprop, "fsl,sec-v5.0-job-ring"))
 			dma_set_mask(jrdev, DMA_BIT_MASK(40));
 		else
 			dma_set_mask(jrdev, DMA_BIT_MASK(36));
@@ -405,15 +482,61 @@
 		dma_set_mask(jrdev, DMA_BIT_MASK(32));
 
 	/* Identify the interrupt */
-	jrpriv->irq = irq_of_parse_and_map(np, 0);
+	jrpriv->irq = irq_of_parse_and_map(nprop, 0);
 
 	/* Now do the platform independent part */
 	error = caam_jr_init(jrdev); /* now turn on hardware */
 	if (error) {
-		of_device_unregister(jr_pdev);
 		kfree(jrpriv);
 		return error;
 	}
 
-	return error;
+	jrpriv->dev = jrdev;
+	spin_lock(&driver_data.jr_alloc_lock);
+	list_add_tail(&jrpriv->list_node, &driver_data.jr_list);
+	spin_unlock(&driver_data.jr_alloc_lock);
+
+	atomic_set(&jrpriv->tfm_count, 0);
+
+	return 0;
 }
+
+static struct of_device_id caam_jr_match[] = {
+	{
+		.compatible = "fsl,sec-v4.0-job-ring",
+	},
+	{
+		.compatible = "fsl,sec4.0-job-ring",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, caam_jr_match);
+
+static struct platform_driver caam_jr_driver = {
+	.driver = {
+		.name = "caam_jr",
+		.owner = THIS_MODULE,
+		.of_match_table = caam_jr_match,
+	},
+	.probe       = caam_jr_probe,
+	.remove      = caam_jr_remove,
+};
+
+static int __init jr_driver_init(void)
+{
+	spin_lock_init(&driver_data.jr_alloc_lock);
+	INIT_LIST_HEAD(&driver_data.jr_list);
+	return platform_driver_register(&caam_jr_driver);
+}
+
+static void __exit jr_driver_exit(void)
+{
+	platform_driver_unregister(&caam_jr_driver);
+}
+
+module_init(jr_driver_init);
+module_exit(jr_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FSL CAAM JR request backend");
+MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");
diff --git a/drivers/crypto/caam/jr.h b/drivers/crypto/caam/jr.h
index 9d8741a..97113a6 100644
--- a/drivers/crypto/caam/jr.h
+++ b/drivers/crypto/caam/jr.h
@@ -8,12 +8,11 @@
 #define JR_H
 
 /* Prototypes for backend-level services exposed to APIs */
+struct device *caam_jr_alloc(void);
+void caam_jr_free(struct device *rdev);
 int caam_jr_enqueue(struct device *dev, u32 *desc,
 		    void (*cbk)(struct device *dev, u32 *desc, u32 status,
 				void *areq),
 		    void *areq);
 
-extern int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
-			 int ring);
-extern int caam_jr_shutdown(struct device *dev);
 #endif /* JR_H */
diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h
index 4455396..d50174f 100644
--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -245,7 +245,7 @@
 
 /* RNG4 TRNG test registers */
 struct rng4tst {
-#define RTMCTL_PRGM 0x00010000	/* 1 -> program mode, 0 -> run mode */
+#define RTMCTL_PRGM	0x00010000	/* 1 -> program mode, 0 -> run mode */
 	u32 rtmctl;		/* misc. control register */
 	u32 rtscmisc;		/* statistical check misc. register */
 	u32 rtpkrrng;		/* poker range register */
@@ -255,6 +255,8 @@
 	};
 #define RTSDCTL_ENT_DLY_SHIFT 16
 #define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
+#define RTSDCTL_ENT_DLY_MIN 1200
+#define RTSDCTL_ENT_DLY_MAX 12800
 	u32 rtsdctl;		/* seed control register */
 	union {
 		u32 rtsblim;	/* PRGM=1: sparse bit limit register */
@@ -266,7 +268,11 @@
 		u32 rtfrqcnt;	/* PRGM=0: freq. count register */
 	};
 	u32 rsvd1[40];
+#define RDSTA_SKVT 0x80000000
+#define RDSTA_SKVN 0x40000000
 #define RDSTA_IF0 0x00000001
+#define RDSTA_IF1 0x00000002
+#define RDSTA_IFMASK (RDSTA_IF1 | RDSTA_IF0)
 	u32 rdsta;
 	u32 rsvd2[15];
 };
@@ -692,6 +698,7 @@
 	u32 jr_ctl_hi;	/* CxJRR - JobR Control Register      @800 */
 	u32 jr_ctl_lo;
 	u64 jr_descaddr;	/* CxDADR - JobR Descriptor Address */
+#define DECO_OP_STATUS_HI_ERR_MASK 0xF00000FF
 	u32 op_status_hi;	/* DxOPSTA - DECO Operation Status */
 	u32 op_status_lo;
 	u32 rsvd24[2];
@@ -706,12 +713,13 @@
 	u32 rsvd29[48];
 	u32 descbuf[64];	/* DxDESB - Descriptor buffer */
 	u32 rscvd30[193];
+#define DESC_DBG_DECO_STAT_HOST_ERR	0x00D00000
+#define DESC_DBG_DECO_STAT_VALID	0x80000000
+#define DESC_DBG_DECO_STAT_MASK		0x00F00000
 	u32 desc_dbg;		/* DxDDR - DECO Debug Register */
 	u32 rsvd31[126];
 };
 
-/* DECO DBG Register Valid Bit*/
-#define DECO_DBG_VALID		0x80000000
 #define DECO_JQCR_WHL		0x20000000
 #define DECO_JQCR_FOUR		0x10000000
 
diff --git a/drivers/crypto/caam/sg_sw_sec4.h b/drivers/crypto/caam/sg_sw_sec4.h
index e0037c8..b12ff85 100644
--- a/drivers/crypto/caam/sg_sw_sec4.h
+++ b/drivers/crypto/caam/sg_sw_sec4.h
@@ -117,6 +117,21 @@
 	return nents;
 }
 
+/* Map SG page in kernel virtual address space and copy */
+static inline void sg_map_copy(u8 *dest, struct scatterlist *sg,
+			       int len, int offset)
+{
+	u8 *mapped_addr;
+
+	/*
+	 * Page here can be user-space pinned using get_user_pages
+	 * Same must be kmapped before use and kunmapped subsequently
+	 */
+	mapped_addr = kmap_atomic(sg_page(sg));
+	memcpy(dest, mapped_addr + offset, len);
+	kunmap_atomic(mapped_addr);
+}
+
 /* Copy from len bytes of sg to dest, starting from beginning */
 static inline void sg_copy(u8 *dest, struct scatterlist *sg, unsigned int len)
 {
@@ -124,15 +139,15 @@
 	int cpy_index = 0, next_cpy_index = current_sg->length;
 
 	while (next_cpy_index < len) {
-		memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg),
-		       current_sg->length);
+		sg_map_copy(dest + cpy_index, current_sg, current_sg->length,
+			    current_sg->offset);
 		current_sg = scatterwalk_sg_next(current_sg);
 		cpy_index = next_cpy_index;
 		next_cpy_index += current_sg->length;
 	}
 	if (cpy_index < len)
-		memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg),
-		       len - cpy_index);
+		sg_map_copy(dest + cpy_index, current_sg, len-cpy_index,
+			    current_sg->offset);
 }
 
 /* Copy sg data, from to_skip to end, to dest */
@@ -140,7 +155,7 @@
 				      int to_skip, unsigned int end)
 {
 	struct scatterlist *current_sg = sg;
-	int sg_index, cpy_index;
+	int sg_index, cpy_index, offset;
 
 	sg_index = current_sg->length;
 	while (sg_index <= to_skip) {
@@ -148,9 +163,10 @@
 		sg_index += current_sg->length;
 	}
 	cpy_index = sg_index - to_skip;
-	memcpy(dest, (u8 *) sg_virt(current_sg) +
-	       current_sg->length - cpy_index, cpy_index);
-	current_sg = scatterwalk_sg_next(current_sg);
-	if (end - sg_index)
+	offset = current_sg->offset + current_sg->length - cpy_index;
+	sg_map_copy(dest, current_sg, cpy_index, offset);
+	if (end - sg_index) {
+		current_sg = scatterwalk_sg_next(current_sg);
 		sg_copy(dest + cpy_index, current_sg, end - sg_index);
+	}
 }
diff --git a/drivers/crypto/dcp.c b/drivers/crypto/dcp.c
index a8a7dd4..247ab80 100644
--- a/drivers/crypto/dcp.c
+++ b/drivers/crypto/dcp.c
@@ -733,12 +733,9 @@
 	platform_set_drvdata(pdev, dev);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "failed to get IORESOURCE_MEM\n");
-		return -ENXIO;
-	}
-	dev->dcp_regs_base = devm_ioremap(&pdev->dev, r->start,
-					  resource_size(r));
+	dev->dcp_regs_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(dev->dcp_regs_base))
+		return PTR_ERR(dev->dcp_regs_base);
 
 	dcp_set(dev, DCP_CTRL_SFRST, DCP_REG_CTRL);
 	udelay(10);
@@ -762,7 +759,8 @@
 		return -EIO;
 	}
 	dev->dcp_vmi_irq = r->start;
-	ret = request_irq(dev->dcp_vmi_irq, dcp_vmi_irq, 0, "dcp", dev);
+	ret = devm_request_irq(&pdev->dev, dev->dcp_vmi_irq, dcp_vmi_irq, 0,
+			       "dcp", dev);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "can't request_irq (0)\n");
 		return -EIO;
@@ -771,15 +769,14 @@
 	r = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
 	if (!r) {
 		dev_err(&pdev->dev, "can't get IRQ resource (1)\n");
-		ret = -EIO;
-		goto err_free_irq0;
+		return -EIO;
 	}
 	dev->dcp_irq = r->start;
-	ret = request_irq(dev->dcp_irq, dcp_irq, 0, "dcp", dev);
+	ret = devm_request_irq(&pdev->dev, dev->dcp_irq, dcp_irq, 0, "dcp",
+			       dev);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "can't request_irq (1)\n");
-		ret = -EIO;
-		goto err_free_irq0;
+		return -EIO;
 	}
 
 	dev->hw_pkg[0] = dma_alloc_coherent(&pdev->dev,
@@ -788,8 +785,7 @@
 			GFP_KERNEL);
 	if (!dev->hw_pkg[0]) {
 		dev_err(&pdev->dev, "Could not allocate hw descriptors\n");
-		ret = -ENOMEM;
-		goto err_free_irq1;
+		return -ENOMEM;
 	}
 
 	for (i = 1; i < DCP_MAX_PKG; i++) {
@@ -848,16 +844,14 @@
 	for (j = 0; j < i; j++)
 		crypto_unregister_alg(&algs[j]);
 err_free_key_iv:
+	tasklet_kill(&dev->done_task);
+	tasklet_kill(&dev->queue_task);
 	dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
 			dev->payload_base_dma);
 err_free_hw_packet:
 	dma_free_coherent(&pdev->dev, DCP_MAX_PKG *
 		sizeof(struct dcp_hw_packet), dev->hw_pkg[0],
 		dev->hw_phys_pkg);
-err_free_irq1:
-	free_irq(dev->dcp_irq, dev);
-err_free_irq0:
-	free_irq(dev->dcp_vmi_irq, dev);
 
 	return ret;
 }
@@ -868,23 +862,20 @@
 	int j;
 	dev = platform_get_drvdata(pdev);
 
-	dma_free_coherent(&pdev->dev,
-			DCP_MAX_PKG * sizeof(struct dcp_hw_packet),
-			dev->hw_pkg[0],	dev->hw_phys_pkg);
-
-	dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
-			dev->payload_base_dma);
-
-	free_irq(dev->dcp_irq, dev);
-	free_irq(dev->dcp_vmi_irq, dev);
-
-	tasklet_kill(&dev->done_task);
-	tasklet_kill(&dev->queue_task);
+	misc_deregister(&dev->dcp_bootstream_misc);
 
 	for (j = 0; j < ARRAY_SIZE(algs); j++)
 		crypto_unregister_alg(&algs[j]);
 
-	misc_deregister(&dev->dcp_bootstream_misc);
+	tasklet_kill(&dev->done_task);
+	tasklet_kill(&dev->queue_task);
+
+	dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
+			dev->payload_base_dma);
+
+	dma_free_coherent(&pdev->dev,
+			DCP_MAX_PKG * sizeof(struct dcp_hw_packet),
+			dev->hw_pkg[0],	dev->hw_phys_pkg);
 
 	return 0;
 }
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 214357e..9dd6e01 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -1149,32 +1149,24 @@
 			unsigned int keylen)
 {
 	struct ixp_ctx *ctx = crypto_aead_ctx(tfm);
-	struct rtattr *rta = (struct rtattr *)key;
-	struct crypto_authenc_key_param *param;
+	struct crypto_authenc_keys keys;
 
-	if (!RTA_OK(rta, keylen))
-		goto badkey;
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
 		goto badkey;
 
-	param = RTA_DATA(rta);
-	ctx->enckey_len = be32_to_cpu(param->enckeylen);
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < ctx->enckey_len)
+	if (keys.authkeylen > sizeof(ctx->authkey))
 		goto badkey;
 
-	ctx->authkey_len = keylen - ctx->enckey_len;
-	memcpy(ctx->enckey, key + ctx->authkey_len, ctx->enckey_len);
-	memcpy(ctx->authkey, key, ctx->authkey_len);
+	if (keys.enckeylen > sizeof(ctx->enckey))
+		goto badkey;
+
+	memcpy(ctx->authkey, keys.authkey, keys.authkeylen);
+	memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
+	ctx->authkey_len = keys.authkeylen;
+	ctx->enckey_len = keys.enckeylen;
 
 	return aead_setup(tfm, crypto_aead_authsize(tfm));
 badkey:
-	ctx->enckey_len = 0;
 	crypto_aead_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
 	return -EINVAL;
 }
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index 3374a3e..8d1e6f8 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -907,7 +907,7 @@
 	return mv_cra_hash_init(tfm, "sha1", COP_HMAC_SHA1, SHA1_BLOCK_SIZE);
 }
 
-irqreturn_t crypto_int(int irq, void *priv)
+static irqreturn_t crypto_int(int irq, void *priv)
 {
 	u32 val;
 
@@ -928,7 +928,7 @@
 	return IRQ_HANDLED;
 }
 
-struct crypto_alg mv_aes_alg_ecb = {
+static struct crypto_alg mv_aes_alg_ecb = {
 	.cra_name		= "ecb(aes)",
 	.cra_driver_name	= "mv-ecb-aes",
 	.cra_priority	= 300,
@@ -951,7 +951,7 @@
 	},
 };
 
-struct crypto_alg mv_aes_alg_cbc = {
+static struct crypto_alg mv_aes_alg_cbc = {
 	.cra_name		= "cbc(aes)",
 	.cra_driver_name	= "mv-cbc-aes",
 	.cra_priority	= 300,
@@ -975,7 +975,7 @@
 	},
 };
 
-struct ahash_alg mv_sha1_alg = {
+static struct ahash_alg mv_sha1_alg = {
 	.init = mv_hash_init,
 	.update = mv_hash_update,
 	.final = mv_hash_final,
@@ -999,7 +999,7 @@
 		 }
 };
 
-struct ahash_alg mv_hmac_sha1_alg = {
+static struct ahash_alg mv_hmac_sha1_alg = {
 	.init = mv_hash_init,
 	.update = mv_hash_update,
 	.final = mv_hash_final,
@@ -1084,7 +1084,7 @@
 		goto err_unmap_sram;
 	}
 
-	ret = request_irq(irq, crypto_int, IRQF_DISABLED, dev_name(&pdev->dev),
+	ret = request_irq(irq, crypto_int, 0, dev_name(&pdev->dev),
 			cp);
 	if (ret)
 		goto err_thread;
@@ -1187,7 +1187,7 @@
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "mv_crypto",
-		.of_match_table = of_match_ptr(mv_cesa_of_match_table),
+		.of_match_table = mv_cesa_of_match_table,
 	},
 };
 MODULE_ALIAS("platform:mv_crypto");
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index ce791c2..a9ccbf1 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -275,7 +275,7 @@
 	if (dd->flags & FLAGS_CBC)
 		val |= AES_REG_CTRL_CBC;
 	if (dd->flags & FLAGS_CTR) {
-		val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_32;
+		val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_128;
 		mask = AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_MASK;
 	}
 	if (dd->flags & FLAGS_ENCRYPT)
@@ -554,7 +554,7 @@
 	return err;
 }
 
-int omap_aes_check_aligned(struct scatterlist *sg)
+static int omap_aes_check_aligned(struct scatterlist *sg)
 {
 	while (sg) {
 		if (!IS_ALIGNED(sg->offset, 4))
@@ -566,7 +566,7 @@
 	return 0;
 }
 
-int omap_aes_copy_sgs(struct omap_aes_dev *dd)
+static int omap_aes_copy_sgs(struct omap_aes_dev *dd)
 {
 	void *buf_in, *buf_out;
 	int pages;
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index e28104b..e45aaaf 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -2033,3 +2033,4 @@
 MODULE_DESCRIPTION("OMAP SHA1/MD5 hw acceleration support.");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Dmitry Kasatkin");
+MODULE_ALIAS("platform:omap-sham");
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 888f7f4..a6175ba 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -495,45 +495,29 @@
 {
 	struct spacc_aead_ctx *ctx = crypto_aead_ctx(tfm);
 	struct spacc_alg *alg = to_spacc_alg(tfm->base.__crt_alg);
-	struct rtattr *rta = (void *)key;
-	struct crypto_authenc_key_param *param;
-	unsigned int authkeylen, enckeylen;
+	struct crypto_authenc_keys keys;
 	int err = -EINVAL;
 
-	if (!RTA_OK(rta, keylen))
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
 		goto badkey;
 
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+	if (keys.enckeylen > AES_MAX_KEY_SIZE)
 		goto badkey;
 
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < enckeylen)
-		goto badkey;
-
-	authkeylen = keylen - enckeylen;
-
-	if (enckeylen > AES_MAX_KEY_SIZE)
+	if (keys.authkeylen > sizeof(ctx->hash_ctx))
 		goto badkey;
 
 	if ((alg->ctrl_default & SPACC_CRYPTO_ALG_MASK) ==
 	    SPA_CTRL_CIPH_ALG_AES)
-		err = spacc_aead_aes_setkey(tfm, key + authkeylen, enckeylen);
+		err = spacc_aead_aes_setkey(tfm, keys.enckey, keys.enckeylen);
 	else
-		err = spacc_aead_des_setkey(tfm, key + authkeylen, enckeylen);
+		err = spacc_aead_des_setkey(tfm, keys.enckey, keys.enckeylen);
 
 	if (err)
 		goto badkey;
 
-	memcpy(ctx->hash_ctx, key, authkeylen);
-	ctx->hash_key_len = authkeylen;
+	memcpy(ctx->hash_ctx, keys.authkey, keys.authkeylen);
+	ctx->hash_key_len = keys.authkeylen;
 
 	return 0;
 
diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c
index d7bb8ba..785a9de 100644
--- a/drivers/crypto/sahara.c
+++ b/drivers/crypto/sahara.c
@@ -1058,7 +1058,7 @@
 	.driver		= {
 		.name	= SAHARA_NAME,
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(sahara_dt_ids),
+		.of_match_table = sahara_dt_ids,
 	},
 	.id_table = sahara_platform_ids,
 };
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 6cd0e60..905de44 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -673,39 +673,20 @@
 		       const u8 *key, unsigned int keylen)
 {
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct rtattr *rta = (void *)key;
-	struct crypto_authenc_key_param *param;
-	unsigned int authkeylen;
-	unsigned int enckeylen;
+	struct crypto_authenc_keys keys;
 
-	if (!RTA_OK(rta, keylen))
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
 		goto badkey;
 
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+	if (keys.authkeylen + keys.enckeylen > TALITOS_MAX_KEY_SIZE)
 		goto badkey;
 
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
+	memcpy(ctx->key, keys.authkey, keys.authkeylen);
+	memcpy(&ctx->key[keys.authkeylen], keys.enckey, keys.enckeylen);
 
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < enckeylen)
-		goto badkey;
-
-	authkeylen = keylen - enckeylen;
-
-	if (keylen > TALITOS_MAX_KEY_SIZE)
-		goto badkey;
-
-	memcpy(&ctx->key, key, keylen);
-
-	ctx->keylen = keylen;
-	ctx->enckeylen = enckeylen;
-	ctx->authkeylen = authkeylen;
+	ctx->keylen = keys.authkeylen + keys.enckeylen;
+	ctx->enckeylen = keys.enckeylen;
+	ctx->authkeylen = keys.authkeylen;
 
 	return 0;
 
diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c
index fa05e3c..060eecc 100644
--- a/drivers/crypto/tegra-aes.c
+++ b/drivers/crypto/tegra-aes.c
@@ -27,6 +27,8 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
@@ -199,8 +201,6 @@
 static DECLARE_WORK(aes_work, aes_workqueue_handler);
 static struct workqueue_struct *aes_wq;
 
-extern unsigned long long tegra_chip_uid(void);
-
 static inline u32 aes_readl(struct tegra_aes_dev *dd, u32 offset)
 {
 	return readl(dd->io_base + offset);
@@ -713,13 +713,12 @@
 	struct tegra_aes_dev *dd = aes_dev;
 	struct tegra_aes_ctx *ctx = &rng_ctx;
 	struct tegra_aes_slot *key_slot;
-	struct timespec ts;
 	int ret = 0;
-	u64 nsec, tmp[2];
+	u8 tmp[16]; /* 16 bytes = 128 bits of entropy */
 	u8 *dt;
 
 	if (!ctx || !dd) {
-		dev_err(dd->dev, "ctx=0x%x, dd=0x%x\n",
+		pr_err("ctx=0x%x, dd=0x%x\n",
 			(unsigned int)ctx, (unsigned int)dd);
 		return -EINVAL;
 	}
@@ -778,14 +777,8 @@
 	if (dd->ivlen >= (2 * DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128)) {
 		dt = dd->iv + DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128;
 	} else {
-		getnstimeofday(&ts);
-		nsec = timespec_to_ns(&ts);
-		do_div(nsec, 1000);
-		nsec ^= dd->ctr << 56;
-		dd->ctr++;
-		tmp[0] = nsec;
-		tmp[1] = tegra_chip_uid();
-		dt = (u8 *)tmp;
+		get_random_bytes(tmp, sizeof(tmp));
+		dt = tmp;
 	}
 	memcpy(dd->dt, dt, DEFAULT_RNG_BLK_SZ);
 
@@ -804,7 +797,7 @@
 	return 0;
 }
 
-void tegra_aes_cra_exit(struct crypto_tfm *tfm)
+static void tegra_aes_cra_exit(struct crypto_tfm *tfm)
 {
 	struct tegra_aes_ctx *ctx =
 		crypto_ablkcipher_ctx((struct crypto_ablkcipher *)tfm);
@@ -924,7 +917,7 @@
 	}
 
 	/* Initialize the vde clock */
-	dd->aes_clk = clk_get(dev, "vde");
+	dd->aes_clk = devm_clk_get(dev, "vde");
 	if (IS_ERR(dd->aes_clk)) {
 		dev_err(dev, "iclock intialization failed.\n");
 		err = -ENODEV;
@@ -1033,8 +1026,6 @@
 	if (dd->buf_out)
 		dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES,
 			dd->buf_out, dd->dma_buf_out);
-	if (!IS_ERR(dd->aes_clk))
-		clk_put(dd->aes_clk);
 	if (aes_wq)
 		destroy_workqueue(aes_wq);
 	spin_lock(&list_lock);
@@ -1068,7 +1059,6 @@
 			  dd->buf_in, dd->dma_buf_in);
 	dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES,
 			  dd->buf_out, dd->dma_buf_out);
-	clk_put(dd->aes_clk);
 	aes_dev = NULL;
 
 	return 0;
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 72c927d..54c18c2 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -158,7 +158,7 @@
 	spin_unlock_irqrestore(&kona_gpio->lock, flags);
 
 	/* return the specified bit status */
-	return !!(val & bit);
+	return !!(val & BIT(bit));
 }
 
 static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c
index f7a0cc4..7b37300 100644
--- a/drivers/gpio/gpio-msm-v2.c
+++ b/drivers/gpio/gpio-msm-v2.c
@@ -102,7 +102,7 @@
 	DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO);
 	DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
 	struct irq_domain *domain;
-	unsigned int summary_irq;
+	int summary_irq;
 	void __iomem *msm_tlmm_base;
 };
 
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 3c3321f..db31290 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -79,7 +79,7 @@
 	spinlock_t	   lock;
 	void __iomem	  *membase;
 	void __iomem	  *percpu_membase;
-	unsigned int       irqbase;
+	int		   irqbase;
 	struct irq_domain *domain;
 	int                soc_variant;
 };
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index f22f7f3..b4d4211 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -286,11 +286,6 @@
 	if (!chip->base)
 		return -ENOMEM;
 
-	chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
-					     irq_base, &pl061_domain_ops, chip);
-	if (!chip->domain)
-		return -ENODEV;
-
 	spin_lock_init(&chip->lock);
 
 	chip->gc.request = pl061_gpio_request;
@@ -320,6 +315,11 @@
 	irq_set_chained_handler(irq, pl061_irq_handler);
 	irq_set_handler_data(irq, chip);
 
+	chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
+					     irq_base, &pl061_domain_ops, chip);
+	if (!chip->domain)
+		return -ENODEV;
+
 	for (i = 0; i < PL061_GPIO_NR; i++) {
 		if (pdata) {
 			if (pdata->directions & (1 << i))
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index d3f15ae..fe088a3 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -381,7 +381,7 @@
 	if (!p->irq_domain) {
 		ret = -ENXIO;
 		dev_err(&pdev->dev, "cannot initialize irq domain\n");
-		goto err1;
+		goto err0;
 	}
 
 	if (devm_request_irq(&pdev->dev, irq->start,
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
index 0502b9a..da071dd 100644
--- a/drivers/gpio/gpio-tb10x.c
+++ b/drivers/gpio/gpio-tb10x.c
@@ -132,6 +132,7 @@
 	int mask = BIT(offset);
 	int val = TB10X_GPIO_DIR_OUT << offset;
 
+	tb10x_gpio_set(chip, offset, value);
 	tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val);
 
 	return 0;
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 0c7e891..b97d6a6 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -354,17 +354,18 @@
 static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
+	int ret = -EINVAL;
 
 	mutex_lock(&priv->mutex);
 	if (offset < TWL4030_GPIO_MAX)
-		twl4030_set_gpio_dataout(offset, value);
+		ret = twl4030_set_gpio_direction(offset, 0);
 
 	priv->direction |= BIT(offset);
 	mutex_unlock(&priv->mutex);
 
 	twl_set(chip, offset, value);
 
-	return 0;
+	return ret;
 }
 
 static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
@@ -435,7 +436,8 @@
 
 static int gpio_twl4030_remove(struct platform_device *pdev);
 
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
+				struct twl4030_gpio_platform_data *pdata)
 {
 	struct twl4030_gpio_platform_data *omap_twl_info;
 
@@ -443,6 +445,9 @@
 	if (!omap_twl_info)
 		return NULL;
 
+	if (pdata)
+		*omap_twl_info = *pdata;
+
 	omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
 			"ti,use-leds");
 
@@ -500,7 +505,7 @@
 	mutex_init(&priv->mutex);
 
 	if (node)
-		pdata = of_gpio_twl4030(&pdev->dev);
+		pdata = of_gpio_twl4030(&pdev->dev, pdata);
 
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "Platform data is missing\n");
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 1a605f2a..06fb5cf 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -105,3 +105,4 @@
 
 MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ucb1400_gpio");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 4e10b10..ac53a95 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -14,6 +14,7 @@
 #include <linux/idr.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
+#include <linux/gpio/driver.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/gpio.h>
@@ -1308,6 +1309,18 @@
 }
 EXPORT_SYMBOL_GPL(gpiochip_find);
 
+static int gpiochip_match_name(struct gpio_chip *chip, void *data)
+{
+	const char *name = data;
+
+	return !strcmp(chip->label, name);
+}
+
+static struct gpio_chip *find_chip_by_name(const char *name)
+{
+	return gpiochip_find((void *)name, gpiochip_match_name);
+}
+
 #ifdef CONFIG_PINCTRL
 
 /**
@@ -1341,8 +1354,10 @@
 	ret = pinctrl_get_group_pins(pctldev, pin_group,
 					&pin_range->range.pins,
 					&pin_range->range.npins);
-	if (ret < 0)
+	if (ret < 0) {
+		kfree(pin_range);
 		return ret;
+	}
 
 	pinctrl_add_gpio_range(pctldev, &pin_range->range);
 
@@ -2260,26 +2275,10 @@
 	mutex_unlock(&gpio_lookup_lock);
 }
 
-/*
- * Caller must have a acquired gpio_lookup_lock
- */
-static struct gpio_chip *find_chip_by_name(const char *name)
-{
-	struct gpio_chip *chip = NULL;
-
-	list_for_each_entry(chip, &gpio_lookup_list, list) {
-		if (chip->label == NULL)
-			continue;
-		if (!strcmp(chip->label, name))
-			break;
-	}
-
-	return chip;
-}
-
 #ifdef CONFIG_OF
 static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
-				      unsigned int idx, unsigned long *flags)
+				      unsigned int idx,
+				      enum gpio_lookup_flags *flags)
 {
 	char prop_name[32]; /* 32 is max size of property name */
 	enum of_gpio_flags of_flags;
@@ -2297,20 +2296,22 @@
 		return desc;
 
 	if (of_flags & OF_GPIO_ACTIVE_LOW)
-		*flags |= GPIOF_ACTIVE_LOW;
+		*flags |= GPIO_ACTIVE_LOW;
 
 	return desc;
 }
 #else
 static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
-				      unsigned int idx, unsigned long *flags)
+				      unsigned int idx,
+				      enum gpio_lookup_flags *flags)
 {
 	return ERR_PTR(-ENODEV);
 }
 #endif
 
 static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
-					unsigned int idx, unsigned long *flags)
+					unsigned int idx,
+					enum gpio_lookup_flags *flags)
 {
 	struct acpi_gpio_info info;
 	struct gpio_desc *desc;
@@ -2320,13 +2321,14 @@
 		return desc;
 
 	if (info.gpioint && info.active_low)
-		*flags |= GPIOF_ACTIVE_LOW;
+		*flags |= GPIO_ACTIVE_LOW;
 
 	return desc;
 }
 
 static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
-				    unsigned int idx, unsigned long *flags)
+				    unsigned int idx,
+				    enum gpio_lookup_flags *flags)
 {
 	const char *dev_id = dev ? dev_name(dev) : NULL;
 	struct gpio_desc *desc = ERR_PTR(-ENODEV);
@@ -2418,7 +2420,7 @@
 {
 	struct gpio_desc *desc;
 	int status;
-	unsigned long flags = 0;
+	enum gpio_lookup_flags flags = 0;
 
 	dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
 
@@ -2444,8 +2446,12 @@
 	if (status < 0)
 		return ERR_PTR(status);
 
-	if (flags & GPIOF_ACTIVE_LOW)
+	if (flags & GPIO_ACTIVE_LOW)
 		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+	if (flags & GPIO_OPEN_DRAIN)
+		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+	if (flags & GPIO_OPEN_SOURCE)
+		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 
 	return desc;
 }
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index bd2bca3..c22c309 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -516,7 +516,7 @@
                 minor_str = "card%d";
 
 	minor->kdev = kzalloc(sizeof(*minor->kdev), GFP_KERNEL);
-	if (!minor->dev) {
+	if (!minor->kdev) {
 		r = -ENOMEM;
 		goto error;
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_hwmon.c b/drivers/gpu/drm/nouveau/nouveau_hwmon.c
index 38a4db5..4aff04f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hwmon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_hwmon.c
@@ -630,7 +630,6 @@
 	hwmon->hwmon = NULL;
 	return ret;
 #else
-	hwmon->hwmon = NULL;
 	return 0;
 #endif
 }
diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c
index 0109a96..821ab7b 100644
--- a/drivers/gpu/drm/qxl/qxl_release.c
+++ b/drivers/gpu/drm/qxl/qxl_release.c
@@ -92,6 +92,7 @@
 						- DRM_FILE_OFFSET);
 		qxl_fence_remove_release(&bo->fence, release->id);
 		qxl_bo_unref(&bo);
+		kfree(entry);
 	}
 	spin_lock(&qdev->release_idr_lock);
 	idr_remove(&qdev->release_idr, release->id);
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 329fbb9..34e2d39 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -460,6 +460,7 @@
 	  - Stantum multitouch panels
 	  - Touch International Panels
 	  - Unitec Panels
+	  - Wistron optical touch panels
 	  - XAT optical touch panels
 	  - Xiroku optical touch panels
 	  - Zytronic touch panels
diff --git a/drivers/hid/hid-appleir.c b/drivers/hid/hid-appleir.c
index a42e6a3..0e6a42d 100644
--- a/drivers/hid/hid-appleir.c
+++ b/drivers/hid/hid-appleir.c
@@ -297,6 +297,9 @@
 
 	appleir->hid = hid;
 
+	/* force input as some remotes bypass the input registration */
+	hid->quirks |= HID_QUIRK_HIDINPUT_FORCE;
+
 	spin_lock_init(&appleir->lock);
 	setup_timer(&appleir->key_up_timer,
 		    key_up_tick, (unsigned long) appleir);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8c10f27..253fe23 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1723,6 +1723,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_MANTICORE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
@@ -1879,7 +1880,6 @@
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
 	{ }
 };
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 7655962..f9304cb 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -489,6 +489,7 @@
 #define USB_VENDOR_ID_KYE		0x0458
 #define USB_DEVICE_ID_KYE_ERGO_525V	0x0087
 #define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE	0x0138
+#define USB_DEVICE_ID_GENIUS_MANTICORE	0x0153
 #define USB_DEVICE_ID_GENIUS_GX_IMPERATOR	0x4018
 #define USB_DEVICE_ID_KYE_GPEN_560	0x5003
 #define USB_DEVICE_ID_KYE_EASYPEN_I405X	0x5010
@@ -640,7 +641,6 @@
 #define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN	0x0003
 
 #define USB_VENDOR_ID_NINTENDO		0x057e
-#define USB_VENDOR_ID_NINTENDO2		0x054c
 #define USB_DEVICE_ID_NINTENDO_WIIMOTE	0x0306
 #define USB_DEVICE_ID_NINTENDO_WIIMOTE2	0x0330
 
@@ -902,6 +902,9 @@
 #define USB_DEVICE_ID_SUPER_DUAL_BOX_PRO 0x8802
 #define USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO 0x8804
 
+#define USB_VENDOR_ID_WISTRON		0x0fb8
+#define USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH		0x1109
+
 #define USB_VENDOR_ID_X_TENSIONS               0x1ae7
 #define USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE    0x9001
 
diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
index 7384512..ecb5ca6 100644
--- a/drivers/hid/hid-kye.c
+++ b/drivers/hid/hid-kye.c
@@ -341,6 +341,9 @@
 	case USB_DEVICE_ID_GENIUS_GX_IMPERATOR:
 		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83,
 					"Genius Gx Imperator Keyboard");
+	case USB_DEVICE_ID_GENIUS_MANTICORE:
+		rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
+					"Genius Manticore Keyboard");
 		break;
 	}
 	return rdesc;
@@ -418,6 +421,14 @@
 			goto enabling_err;
 		}
 		break;
+	case USB_DEVICE_ID_GENIUS_MANTICORE:
+		/*
+		 * The manticore keyboard needs to have all the interfaces
+		 * opened at least once to be fully functional.
+		 */
+		if (hid_hw_open(hdev))
+			hid_hw_close(hdev);
+		break;
 	}
 
 	return 0;
@@ -439,6 +450,8 @@
 				USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
 				USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_GENIUS_MANTICORE) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, kye_devices);
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index a2cedb8..d83b1e8b 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1335,6 +1335,12 @@
 	{ .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_UNITEC,
 			USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
+
+	/* Wistron panels */
+	{ .driver_data = MT_CLS_NSMU,
+		MT_USB_DEVICE(USB_VENDOR_ID_WISTRON,
+			USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH) },
+
 	/* XAT */
 	{ .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_XAT,
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index da551d1..098af2f8 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -225,6 +225,13 @@
 struct sony_sc {
 	unsigned long quirks;
 
+#ifdef CONFIG_SONY_FF
+	struct work_struct rumble_worker;
+	struct hid_device *hdev;
+	__u8 left;
+	__u8 right;
+#endif
+
 	void *extra;
 };
 
@@ -615,9 +622,9 @@
 }
 
 #ifdef CONFIG_SONY_FF
-static int sony_play_effect(struct input_dev *dev, void *data,
-			    struct ff_effect *effect)
+static void sony_rumble_worker(struct work_struct *work)
 {
+	struct sony_sc *sc = container_of(work, struct sony_sc, rumble_worker);
 	unsigned char buf[] = {
 		0x01,
 		0x00, 0xff, 0x00, 0xff, 0x00,
@@ -628,21 +635,28 @@
 		0xff, 0x27, 0x10, 0x00, 0x32,
 		0x00, 0x00, 0x00, 0x00, 0x00
 	};
-	__u8 left;
-	__u8 right;
+
+	buf[3] = sc->right;
+	buf[5] = sc->left;
+
+	sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf),
+					HID_OUTPUT_REPORT);
+}
+
+static int sony_play_effect(struct input_dev *dev, void *data,
+			    struct ff_effect *effect)
+{
 	struct hid_device *hid = input_get_drvdata(dev);
+	struct sony_sc *sc = hid_get_drvdata(hid);
 
 	if (effect->type != FF_RUMBLE)
 		return 0;
 
-	left = effect->u.rumble.strong_magnitude / 256;
-	right = effect->u.rumble.weak_magnitude ? 1 : 0;
+	sc->left = effect->u.rumble.strong_magnitude / 256;
+	sc->right = effect->u.rumble.weak_magnitude ? 1 : 0;
 
-	buf[3] = right;
-	buf[5] = left;
-
-	return hid->hid_output_raw_report(hid, buf, sizeof(buf),
-					  HID_OUTPUT_REPORT);
+	schedule_work(&sc->rumble_worker);
+	return 0;
 }
 
 static int sony_init_ff(struct hid_device *hdev)
@@ -650,16 +664,31 @@
 	struct hid_input *hidinput = list_entry(hdev->inputs.next,
 						struct hid_input, list);
 	struct input_dev *input_dev = hidinput->input;
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+
+	sc->hdev = hdev;
+	INIT_WORK(&sc->rumble_worker, sony_rumble_worker);
 
 	input_set_capability(input_dev, EV_FF, FF_RUMBLE);
 	return input_ff_create_memless(input_dev, NULL, sony_play_effect);
 }
 
+static void sony_destroy_ff(struct hid_device *hdev)
+{
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+
+	cancel_work_sync(&sc->rumble_worker);
+}
+
 #else
 static int sony_init_ff(struct hid_device *hdev)
 {
 	return 0;
 }
+
+static void sony_destroy_ff(struct hid_device *hdev)
+{
+}
 #endif
 
 static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
@@ -728,6 +757,8 @@
 	if (sc->quirks & BUZZ_CONTROLLER)
 		buzz_remove(hdev);
 
+	sony_destroy_ff(hdev);
+
 	hid_hw_stop(hdev);
 }
 
diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c
index 1446f52..abb20db 100644
--- a/drivers/hid/hid-wiimote-core.c
+++ b/drivers/hid/hid-wiimote-core.c
@@ -834,8 +834,7 @@
 		goto done;
 	}
 
-	if (vendor == USB_VENDOR_ID_NINTENDO ||
-	    vendor == USB_VENDOR_ID_NINTENDO2) {
+	if (vendor == USB_VENDOR_ID_NINTENDO) {
 		if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE) {
 			devtype = WIIMOTE_DEV_GEN10;
 			goto done;
@@ -1856,8 +1855,6 @@
 static const struct hid_device_id wiimote_hid_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
 				USB_DEVICE_ID_NINTENDO_WIIMOTE) },
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2,
-				USB_DEVICE_ID_NINTENDO_WIIMOTE) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
 				USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
 	{ }
diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c
index 93b00d7..cedc6da 100644
--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -287,7 +287,7 @@
 			 */
 			struct uhid_create_req_compat *compat;
 
-			compat = kmalloc(sizeof(*compat), GFP_KERNEL);
+			compat = kzalloc(sizeof(*compat), GFP_KERNEL);
 			if (!compat)
 				return -ENOMEM;
 
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 1d7ff46..dafc63c 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -18,7 +18,6 @@
 #include <linux/err.h>
 
 #include <acpi/acpi.h>
-#include <acpi/acpixf.h>
 #include <acpi/acpi_drivers.h>
 #include <acpi/acpi_bus.h>
 
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 036cf03..18a74a6 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/slab.h>
 
 /* Hardware register offsets and field defintions */
@@ -891,7 +890,7 @@
 	{.compatible = "brcm,kona-i2c",},
 	{},
 };
-MODULE_DEVICE_TABLE(of, kona_i2c_of_match);
+MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match);
 
 static struct platform_driver bcm_kona_i2c_driver = {
 	.driver = {
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index d7e8600..77df97b 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -299,6 +299,7 @@
 	strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
 	adap->algo = &bcm2835_i2c_algo;
 	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
 
 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index ff05d9f..af0b583 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -125,12 +125,12 @@
 static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
 					 int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base + reg);
+	writew_relaxed(val, i2c_dev->base + reg);
 }
 
 static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base + reg);
+	return readw_relaxed(i2c_dev->base + reg);
 }
 
 /* Generate a pulse on the i2c clock pin. */
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index dae3ddfe..721f7eb 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -25,8 +25,6 @@
 #define USB_VENDOR_ID_DIOLAN		0x0abf
 #define USB_DEVICE_ID_DIOLAN_U2C	0x3370
 
-#define DIOLAN_OUT_EP		0x02
-#define DIOLAN_IN_EP		0x84
 
 /* commands via USB, must match command ids in the firmware */
 #define CMD_I2C_READ		0x01
@@ -84,6 +82,7 @@
 struct i2c_diolan_u2c {
 	u8 obuffer[DIOLAN_OUTBUF_LEN];	/* output buffer */
 	u8 ibuffer[DIOLAN_INBUF_LEN];	/* input buffer */
+	int ep_in, ep_out;              /* Endpoints    */
 	struct usb_device *usb_dev;	/* the usb device for this device */
 	struct usb_interface *interface;/* the interface for this device */
 	struct i2c_adapter adapter;	/* i2c related things */
@@ -109,7 +108,7 @@
 		return -EINVAL;
 
 	ret = usb_bulk_msg(dev->usb_dev,
-			   usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
+			   usb_sndbulkpipe(dev->usb_dev, dev->ep_out),
 			   dev->obuffer, dev->olen, &actual,
 			   DIOLAN_USB_TIMEOUT);
 	if (!ret) {
@@ -118,7 +117,7 @@
 
 			tmpret = usb_bulk_msg(dev->usb_dev,
 					      usb_rcvbulkpipe(dev->usb_dev,
-							      DIOLAN_IN_EP),
+							      dev->ep_in),
 					      dev->ibuffer,
 					      sizeof(dev->ibuffer), &actual,
 					      DIOLAN_USB_TIMEOUT);
@@ -210,7 +209,7 @@
 		int ret;
 
 		ret = usb_bulk_msg(dev->usb_dev,
-				   usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
+				   usb_rcvbulkpipe(dev->usb_dev, dev->ep_in),
 				   dev->ibuffer, sizeof(dev->ibuffer), &actual,
 				   DIOLAN_USB_TIMEOUT);
 		if (ret < 0 || actual == 0)
@@ -445,9 +444,14 @@
 static int diolan_u2c_probe(struct usb_interface *interface,
 			    const struct usb_device_id *id)
 {
+	struct usb_host_interface *hostif = interface->cur_altsetting;
 	struct i2c_diolan_u2c *dev;
 	int ret;
 
+	if (hostif->desc.bInterfaceNumber != 0
+	    || hostif->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
@@ -455,6 +459,8 @@
 		ret = -ENOMEM;
 		goto error;
 	}
+	dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+	dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
 
 	dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
 	dev->interface = interface;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a6a891d..90dcc2e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base +
+	writew_relaxed(val, i2c_dev->base +
 			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base +
+	return readw_relaxed(i2c_dev->base +
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
@@ -1037,6 +1037,20 @@
 };
 
 #ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap2420_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_NO_FIFO |
+			OMAP_I2C_FLAG_SIMPLE_CLOCK |
+			OMAP_I2C_FLAG_16BIT_DATA_REG |
+			OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap2430_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
+			OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+};
+
 static struct omap_i2c_bus_platform_data omap3_pdata = {
 	.rev = OMAP_I2C_IP_VERSION_1,
 	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
@@ -1055,6 +1069,14 @@
 		.compatible = "ti,omap3-i2c",
 		.data = &omap3_pdata,
 	},
+	{
+		.compatible = "ti,omap2430-i2c",
+		.data = &omap2430_pdata,
+	},
+	{
+		.compatible = "ti,omap2420-i2c",
+		.data = &omap2420_pdata,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
@@ -1140,9 +1162,9 @@
 	 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
 	 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
 	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
-	 * raw_readw is done.
+	 * readw_relaxed is done.
 	 */
-	rev = __raw_readw(dev->base + 0x04);
+	rev = readw_relaxed(dev->base + 0x04);
 
 	dev->scheme = OMAP_I2C_SCHEME(rev);
 	switch (dev->scheme) {
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index dcda173..1cae4e9 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -350,7 +350,7 @@
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&accel_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -363,10 +363,11 @@
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&accel_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index d72118d..98ba761 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -112,9 +112,10 @@
 	mutex_lock(&st->buf_lock);
 	st->tx[0] = KXSD9_READ(address);
 	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
-	if (ret)
-		return ret;
-	return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+	if (!ret)
+		ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+	mutex_unlock(&st->buf_lock);
+	return ret;
 }
 
 static IIO_CONST_ATTR(accel_scale_available,
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 17df749..5b1aa02 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1047,6 +1047,7 @@
 	} else {
 		if (!st->caps->has_tsmr) {
 			dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
+			ret = -ENODEV;
 			goto error_disable_adc_clk;
 		}
 
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 1294832..c8c1baa 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -88,10 +88,10 @@
 
 /* sample rates to sign extension table */
 static const int mcp3422_sign_extend[4] = {
-	[MCP3422_SRATE_240] = 12,
-	[MCP3422_SRATE_60] = 14,
-	[MCP3422_SRATE_15] = 16,
-	[MCP3422_SRATE_3] = 18 };
+	[MCP3422_SRATE_240] = 11,
+	[MCP3422_SRATE_60] = 13,
+	[MCP3422_SRATE_15] = 15,
+	[MCP3422_SRATE_3] = 17 };
 
 /* Client data (each client gets its own) */
 struct mcp3422 {
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 728411e..d4d7482 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -229,12 +229,15 @@
 	unsigned long flags,
 	const struct iio_buffer_setup_ops *setup_ops)
 {
+	struct iio_buffer *buffer;
 	int ret;
 
-	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
-	if (!indio_dev->buffer)
+	buffer = iio_kfifo_allocate(indio_dev);
+	if (!buffer)
 		return -ENOMEM;
 
+	iio_device_attach_buffer(indio_dev, buffer);
+
 	ret = request_threaded_irq(irq,	pollfunc_th, pollfunc_bh,
 				flags, indio_dev->name, indio_dev);
 	if (ret)
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index b6e77e0..bbd6426 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -55,11 +55,10 @@
 	return 0;
 }
 
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
 {
-	iio_trigger_unregister(indio_dev->trig);
-	iio_trigger_free(indio_dev->trig);
-	indio_dev->trig = NULL;
+	iio_trigger_unregister(attrb->trigger);
+	iio_trigger_free(attrb->trigger);
 }
 EXPORT_SYMBOL(hid_sensor_remove_trigger);
 
@@ -90,7 +89,7 @@
 		dev_err(&indio_dev->dev, "Trigger Register Failed\n");
 		goto error_free_trig;
 	}
-	indio_dev->trig = trig;
+	indio_dev->trig = attrb->trigger = trig;
 
 	return ret;
 
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
index 9a87314..ca02f78 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
@@ -21,6 +21,6 @@
 
 int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 				struct hid_sensor_common *attrb);
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
 
 #endif
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index ea01c6bc..e54f0f4 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -348,7 +348,7 @@
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&gyro_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -361,10 +361,11 @@
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&gyro_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index f98c2b5..b0d65df 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -81,6 +81,8 @@
 config TCS3472
 	tristate "TAOS TCS3472 color light-to-digital converter"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	 If you say yes here you get support for the TAOS TCS3472
 	 family of color light-to-digital converters with IR filter.
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index fa6ae8c..8e8b9d7 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -314,7 +314,7 @@
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&als_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -327,10 +327,11 @@
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct als_state *als_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&als_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 0cf0963..d86d226 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -19,6 +19,8 @@
 config MAG3110
 	tristate "Freescale MAG3110 3-Axis Magnetometer"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the Freescale MAG3110 3-Axis
 	  magnetometer.
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index 2634920..b26e102 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -351,7 +351,7 @@
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&magn_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -364,10 +364,11 @@
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&magn_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index 783c5b4..becf544 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -250,7 +250,12 @@
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
 	.scan_index = idx, \
-	.scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_BE, \
+	}, \
 }
 
 static const struct iio_chan_spec mag3110_channels[] = {
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index 86b8228..45e0e3e 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -180,7 +180,10 @@
 	if (WARN_ON(down_interruptible(&i8042tregs)))
 		return -1;
 
-	if (hp_sdc_enqueue_transaction(&t)) return -1;
+	if (hp_sdc_enqueue_transaction(&t)) {
+		up(&i8042tregs);
+		return -1;
+	}
 	
 	/* Sleep until results come back. */
 	if (WARN_ON(down_interruptible(&i8042tregs)))
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 00d1e54..961d58d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -906,6 +906,17 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmpe-ts.
 
+config TOUCHSCREEN_SUR40
+	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
+	depends on USB
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want support for the Samsung SUR40 touchscreen
+	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sur40.
+
 config TOUCHSCREEN_TPS6507X
 	tristate "TPS6507x based touchscreens"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7587883..62801f2 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -54,6 +54,7 @@
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_SUR40)		+= sur40.o
 obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC)	+= ti_am335x_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 268a35e..279c0e4 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -391,7 +391,7 @@
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int atmel_wm97xx_suspend(struct *dev)
+static int atmel_wm97xx_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
index 42d830e..a035a39 100644
--- a/drivers/input/touchscreen/cyttsp4_core.c
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -1246,8 +1246,7 @@
 
 	dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
 
-	if (!work_pending(&cd->watchdog_work))
-		schedule_work(&cd->watchdog_work);
+	schedule_work(&cd->watchdog_work);
 
 	return;
 }
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
new file mode 100644
index 0000000..cfd1b7e
--- /dev/null
+++ b/drivers/input/touchscreen/sur40.c
@@ -0,0 +1,466 @@
+/*
+ * Surface2.0/SUR40/PixelSense input driver
+ *
+ * Copyright (c) 2013 by Florian 'floe' Echtler <floe@butterbrot.org>
+ *
+ * Derived from the USB Skeleton driver 1.1,
+ * Copyright (c) 2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * and from the Apple USB BCM5974 multitouch driver,
+ * Copyright (c) 2008 Henrik Rydberg (rydberg@euromail.se)
+ *
+ * and from the generic hid-multitouch driver,
+ * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/printk.h>
+#include <linux/input-polldev.h>
+#include <linux/input/mt.h>
+#include <linux/usb/input.h>
+
+/* read 512 bytes from endpoint 0x86 -> get header + blobs */
+struct sur40_header {
+
+	__le16 type;       /* always 0x0001 */
+	__le16 count;      /* count of blobs (if 0: continue prev. packet) */
+
+	__le32 packet_id;  /* unique ID for all packets in one frame */
+
+	__le32 timestamp;  /* milliseconds (inc. by 16 or 17 each frame) */
+	__le32 unknown;    /* "epoch?" always 02/03 00 00 00 */
+
+} __packed;
+
+struct sur40_blob {
+
+	__le16 blob_id;
+
+	u8 action;         /* 0x02 = enter/exit, 0x03 = update (?) */
+	u8 unknown;        /* always 0x01 or 0x02 (no idea what this is?) */
+
+	__le16 bb_pos_x;   /* upper left corner of bounding box */
+	__le16 bb_pos_y;
+
+	__le16 bb_size_x;  /* size of bounding box */
+	__le16 bb_size_y;
+
+	__le16 pos_x;      /* finger tip position */
+	__le16 pos_y;
+
+	__le16 ctr_x;      /* centroid position */
+	__le16 ctr_y;
+
+	__le16 axis_x;     /* somehow related to major/minor axis, mostly: */
+	__le16 axis_y;     /* axis_x == bb_size_y && axis_y == bb_size_x */
+
+	__le32 angle;      /* orientation in radians relative to x axis -
+	                      actually an IEEE754 float, don't use in kernel */
+
+	__le32 area;       /* size in pixels/pressure (?) */
+
+	u8 padding[32];
+
+} __packed;
+
+/* combined header/blob data */
+struct sur40_data {
+	struct sur40_header header;
+	struct sur40_blob   blobs[];
+} __packed;
+
+
+/* version information */
+#define DRIVER_SHORT   "sur40"
+#define DRIVER_AUTHOR  "Florian 'floe' Echtler <floe@butterbrot.org>"
+#define DRIVER_DESC    "Surface2.0/SUR40/PixelSense input driver"
+
+/* vendor and device IDs */
+#define ID_MICROSOFT 0x045e
+#define ID_SUR40     0x0775
+
+/* sensor resolution */
+#define SENSOR_RES_X 1920
+#define SENSOR_RES_Y 1080
+
+/* touch data endpoint */
+#define TOUCH_ENDPOINT 0x86
+
+/* polling interval (ms) */
+#define POLL_INTERVAL 10
+
+/* maximum number of contacts FIXME: this is a guess? */
+#define MAX_CONTACTS 64
+
+/* control commands */
+#define SUR40_GET_VERSION 0xb0 /* 12 bytes string    */
+#define SUR40_UNKNOWN1    0xb3 /*  5 bytes           */
+#define SUR40_UNKNOWN2    0xc1 /* 24 bytes           */
+
+#define SUR40_GET_STATE   0xc5 /*  4 bytes state (?) */
+#define SUR40_GET_SENSORS 0xb1 /*  8 bytes sensors   */
+
+/*
+ * Note: an earlier, non-public version of this driver used USB_RECIP_ENDPOINT
+ * here by mistake which is very likely to have corrupted the firmware EEPROM
+ * on two separate SUR40 devices. Thanks to Alan Stern who spotted this bug.
+ * Should you ever run into a similar problem, the background story to this
+ * incident and instructions on how to fix the corrupted EEPROM are available
+ * at https://floe.butterbrot.org/matrix/hacking/surface/brick.html
+*/
+
+struct sur40_state {
+
+	struct usb_device *usbdev;
+	struct device *dev;
+	struct input_polled_dev *input;
+
+	struct sur40_data *bulk_in_buffer;
+	size_t bulk_in_size;
+	u8 bulk_in_epaddr;
+
+	char phys[64];
+};
+
+static int sur40_command(struct sur40_state *dev,
+			 u8 command, u16 index, void *buffer, u16 size)
+{
+	return usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0),
+			       command,
+			       USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			       0x00, index, buffer, size, 1000);
+}
+
+/* Initialization routine, called from sur40_open */
+static int sur40_init(struct sur40_state *dev)
+{
+	int result;
+	u8 buffer[24];
+
+	/* stupidly replay the original MS driver init sequence */
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_UNKNOWN2,    0x00, buffer, 24);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_UNKNOWN1,    0x00, buffer,  5);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12);
+
+	/*
+	 * Discard the result buffer - no known data inside except
+	 * some version strings, maybe extract these sometime...
+	 */
+
+	return result;
+}
+
+/*
+ * Callback routines from input_polled_dev
+ */
+
+/* Enable the device, polling will now start. */
+static void sur40_open(struct input_polled_dev *polldev)
+{
+	struct sur40_state *sur40 = polldev->private;
+
+	dev_dbg(sur40->dev, "open\n");
+	sur40_init(sur40);
+}
+
+/* Disable device, polling has stopped. */
+static void sur40_close(struct input_polled_dev *polldev)
+{
+	struct sur40_state *sur40 = polldev->private;
+
+	dev_dbg(sur40->dev, "close\n");
+	/*
+	 * There is no known way to stop the device, so we simply
+	 * stop polling.
+	 */
+}
+
+/*
+ * This function is called when a whole contact has been processed,
+ * so that it can assign it to a slot and store the data there.
+ */
+static void sur40_report_blob(struct sur40_blob *blob, struct input_dev *input)
+{
+	int wide, major, minor;
+
+	int bb_size_x = le16_to_cpu(blob->bb_size_x);
+	int bb_size_y = le16_to_cpu(blob->bb_size_y);
+
+	int pos_x = le16_to_cpu(blob->pos_x);
+	int pos_y = le16_to_cpu(blob->pos_y);
+
+	int ctr_x = le16_to_cpu(blob->ctr_x);
+	int ctr_y = le16_to_cpu(blob->ctr_y);
+
+	int slotnum = input_mt_get_slot_by_key(input, blob->blob_id);
+	if (slotnum < 0 || slotnum >= MAX_CONTACTS)
+		return;
+
+	input_mt_slot(input, slotnum);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, 1);
+	wide = (bb_size_x > bb_size_y);
+	major = max(bb_size_x, bb_size_y);
+	minor = min(bb_size_x, bb_size_y);
+
+	input_report_abs(input, ABS_MT_POSITION_X, pos_x);
+	input_report_abs(input, ABS_MT_POSITION_Y, pos_y);
+	input_report_abs(input, ABS_MT_TOOL_X, ctr_x);
+	input_report_abs(input, ABS_MT_TOOL_Y, ctr_y);
+
+	/* TODO: use a better orientation measure */
+	input_report_abs(input, ABS_MT_ORIENTATION, wide);
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
+	input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
+}
+
+/* core function: poll for new input data */
+static void sur40_poll(struct input_polled_dev *polldev)
+{
+
+	struct sur40_state *sur40 = polldev->private;
+	struct input_dev *input = polldev->input;
+	int result, bulk_read, need_blobs, packet_blobs, i;
+	u32 packet_id;
+
+	struct sur40_header *header = &sur40->bulk_in_buffer->header;
+	struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0];
+
+	dev_dbg(sur40->dev, "poll\n");
+
+	need_blobs = -1;
+
+	do {
+
+		/* perform a blocking bulk read to get data from the device */
+		result = usb_bulk_msg(sur40->usbdev,
+			usb_rcvbulkpipe(sur40->usbdev, sur40->bulk_in_epaddr),
+			sur40->bulk_in_buffer, sur40->bulk_in_size,
+			&bulk_read, 1000);
+
+		dev_dbg(sur40->dev, "received %d bytes\n", bulk_read);
+
+		if (result < 0) {
+			dev_err(sur40->dev, "error in usb_bulk_read\n");
+			return;
+		}
+
+		result = bulk_read - sizeof(struct sur40_header);
+
+		if (result % sizeof(struct sur40_blob) != 0) {
+			dev_err(sur40->dev, "transfer size mismatch\n");
+			return;
+		}
+
+		/* first packet? */
+		if (need_blobs == -1) {
+			need_blobs = le16_to_cpu(header->count);
+			dev_dbg(sur40->dev, "need %d blobs\n", need_blobs);
+			packet_id = header->packet_id;
+		}
+
+		/*
+		 * Sanity check. when video data is also being retrieved, the
+		 * packet ID will usually increase in the middle of a series
+		 * instead of at the end.
+		 */
+		if (packet_id != header->packet_id)
+			dev_warn(sur40->dev, "packet ID mismatch\n");
+
+		packet_blobs = result / sizeof(struct sur40_blob);
+		dev_dbg(sur40->dev, "received %d blobs\n", packet_blobs);
+
+		/* packets always contain at least 4 blobs, even if empty */
+		if (packet_blobs > need_blobs)
+			packet_blobs = need_blobs;
+
+		for (i = 0; i < packet_blobs; i++) {
+			need_blobs--;
+			dev_dbg(sur40->dev, "processing blob\n");
+			sur40_report_blob(&(inblob[i]), input);
+		}
+
+	} while (need_blobs > 0);
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+}
+
+/* Initialize input device parameters. */
+static void sur40_input_setup(struct input_dev *input_dev)
+{
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, SENSOR_RES_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, SENSOR_RES_Y, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_TOOL_X,
+			     0, SENSOR_RES_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOOL_Y,
+			     0, SENSOR_RES_Y, 0, 0);
+
+	/* max value unknown, but major/minor axis
+	 * can never be larger than screen */
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, SENSOR_RES_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+			     0, SENSOR_RES_Y, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+	input_mt_init_slots(input_dev, MAX_CONTACTS,
+			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+}
+
+/* Check candidate USB interface. */
+static int sur40_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	struct sur40_state *sur40;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	struct input_polled_dev *poll_dev;
+	int error;
+
+	/* Check if we really have the right interface. */
+	iface_desc = &interface->altsetting[0];
+	if (iface_desc->desc.bInterfaceClass != 0xFF)
+		return -ENODEV;
+
+	/* Use endpoint #4 (0x86). */
+	endpoint = &iface_desc->endpoint[4].desc;
+	if (endpoint->bEndpointAddress != TOUCH_ENDPOINT)
+		return -ENODEV;
+
+	/* Allocate memory for our device state and initialize it. */
+	sur40 = kzalloc(sizeof(struct sur40_state), GFP_KERNEL);
+	if (!sur40)
+		return -ENOMEM;
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		error = -ENOMEM;
+		goto err_free_dev;
+	}
+
+	/* Set up polled input device control structure */
+	poll_dev->private = sur40;
+	poll_dev->poll_interval = POLL_INTERVAL;
+	poll_dev->open = sur40_open;
+	poll_dev->poll = sur40_poll;
+	poll_dev->close = sur40_close;
+
+	/* Set up regular input device structure */
+	sur40_input_setup(poll_dev->input);
+
+	poll_dev->input->name = "Samsung SUR40";
+	usb_to_input_id(usbdev, &poll_dev->input->id);
+	usb_make_path(usbdev, sur40->phys, sizeof(sur40->phys));
+	strlcat(sur40->phys, "/input0", sizeof(sur40->phys));
+	poll_dev->input->phys = sur40->phys;
+	poll_dev->input->dev.parent = &interface->dev;
+
+	sur40->usbdev = usbdev;
+	sur40->dev = &interface->dev;
+	sur40->input = poll_dev;
+
+	/* use the bulk-in endpoint tested above */
+	sur40->bulk_in_size = usb_endpoint_maxp(endpoint);
+	sur40->bulk_in_epaddr = endpoint->bEndpointAddress;
+	sur40->bulk_in_buffer = kmalloc(sur40->bulk_in_size, GFP_KERNEL);
+	if (!sur40->bulk_in_buffer) {
+		dev_err(&interface->dev, "Unable to allocate input buffer.");
+		error = -ENOMEM;
+		goto err_free_polldev;
+	}
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(&interface->dev,
+			"Unable to register polled input device.");
+		goto err_free_buffer;
+	}
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, sur40);
+	dev_dbg(&interface->dev, "%s is now attached\n", DRIVER_DESC);
+
+	return 0;
+
+err_free_buffer:
+	kfree(sur40->bulk_in_buffer);
+err_free_polldev:
+	input_free_polled_device(sur40->input);
+err_free_dev:
+	kfree(sur40);
+
+	return error;
+}
+
+/* Unregister device & clean up. */
+static void sur40_disconnect(struct usb_interface *interface)
+{
+	struct sur40_state *sur40 = usb_get_intfdata(interface);
+
+	input_unregister_polled_device(sur40->input);
+	input_free_polled_device(sur40->input);
+	kfree(sur40->bulk_in_buffer);
+	kfree(sur40);
+
+	usb_set_intfdata(interface, NULL);
+	dev_dbg(&interface->dev, "%s is now disconnected\n", DRIVER_DESC);
+}
+
+static const struct usb_device_id sur40_table[] = {
+	{ USB_DEVICE(ID_MICROSOFT, ID_SUR40) },  /* Samsung SUR40 */
+	{ }                                      /* terminating null entry */
+};
+MODULE_DEVICE_TABLE(usb, sur40_table);
+
+/* USB-specific object needed to register this driver with the USB subsystem. */
+static struct usb_driver sur40_driver = {
+	.name = DRIVER_SHORT,
+	.probe = sur40_probe,
+	.disconnect = sur40_disconnect,
+	.id_table = sur40_table,
+};
+
+module_usb_driver(sur40_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 6753b65..d2f0120 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -40,6 +40,7 @@
 				   windfarm_ad7417_sensor.o \
 				   windfarm_lm75_sensor.o \
 				   windfarm_lm87_sensor.o \
+				   windfarm_max6690_sensor.o \
 				   windfarm_pid.o \
 				   windfarm_cpufreq_clamp.o \
 				   windfarm_rm31.o
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b6b7a28..e60cebf 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7777,7 +7777,7 @@
 	if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
 		return;
 	if ( ! (
-		(mddev->flags & ~ (1<<MD_CHANGE_PENDING)) ||
+		(mddev->flags & MD_UPDATE_SB_FLAGS & ~ (1<<MD_CHANGE_PENDING)) ||
 		test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
 		test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
 		(mddev->external == 0 && mddev->safemode == 1) ||
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 47da0af..cc055da 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -678,26 +678,23 @@
 			} else
 				init_stripe(sh, sector, previous);
 		} else {
+			spin_lock(&conf->device_lock);
 			if (atomic_read(&sh->count)) {
 				BUG_ON(!list_empty(&sh->lru)
 				    && !test_bit(STRIPE_EXPANDING, &sh->state)
 				    && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state)
-				    && !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state));
+					);
 			} else {
-				spin_lock(&conf->device_lock);
 				if (!test_bit(STRIPE_HANDLE, &sh->state))
 					atomic_inc(&conf->active_stripes);
-				if (list_empty(&sh->lru) &&
-				    !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state) &&
-				    !test_bit(STRIPE_EXPANDING, &sh->state))
-					BUG();
+				BUG_ON(list_empty(&sh->lru));
 				list_del_init(&sh->lru);
 				if (sh->group) {
 					sh->group->stripes_cnt--;
 					sh->group = NULL;
 				}
-				spin_unlock(&conf->device_lock);
 			}
+			spin_unlock(&conf->device_lock);
 		}
 	} while (sh == NULL);
 
@@ -5471,7 +5468,7 @@
 	for (i = 0; i < *group_cnt; i++) {
 		struct r5worker_group *group;
 
-		group = worker_groups[i];
+		group = &(*worker_groups)[i];
 		INIT_LIST_HEAD(&group->handle_list);
 		group->conf = conf;
 		group->workers = workers + i * cnt;
diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index 1cb6e51..170e8e60 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -141,6 +141,24 @@
 	ndev->event_cb = NULL;
 }
 
+static void ntb_irq_work(unsigned long data)
+{
+	struct ntb_db_cb *db_cb = (struct ntb_db_cb *)data;
+	int rc;
+
+	rc = db_cb->callback(db_cb->data, db_cb->db_num);
+	if (rc)
+		tasklet_schedule(&db_cb->irq_work);
+	else {
+		struct ntb_device *ndev = db_cb->ndev;
+		unsigned long mask;
+
+		mask = readw(ndev->reg_ofs.ldb_mask);
+		clear_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+		writew(mask, ndev->reg_ofs.ldb_mask);
+	}
+}
+
 /**
  * ntb_register_db_callback() - register a callback for doorbell interrupt
  * @ndev: pointer to ntb_device instance
@@ -155,7 +173,7 @@
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
 int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
-			     void *data, void (*func)(void *data, int db_num))
+			     void *data, int (*func)(void *data, int db_num))
 {
 	unsigned long mask;
 
@@ -166,6 +184,10 @@
 
 	ndev->db_cb[idx].callback = func;
 	ndev->db_cb[idx].data = data;
+	ndev->db_cb[idx].ndev = ndev;
+
+	tasklet_init(&ndev->db_cb[idx].irq_work, ntb_irq_work,
+		     (unsigned long) &ndev->db_cb[idx]);
 
 	/* unmask interrupt */
 	mask = readw(ndev->reg_ofs.ldb_mask);
@@ -194,6 +216,8 @@
 	set_bit(idx * ndev->bits_per_vector, &mask);
 	writew(mask, ndev->reg_ofs.ldb_mask);
 
+	tasklet_disable(&ndev->db_cb[idx].irq_work);
+
 	ndev->db_cb[idx].callback = NULL;
 }
 
@@ -678,6 +702,7 @@
 				return -EINVAL;
 
 			ndev->limits.max_mw = SNB_ERRATA_MAX_MW;
+			ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
 			ndev->reg_ofs.spad_write = ndev->mw[1].vbase +
 						   SNB_SPAD_OFFSET;
 			ndev->reg_ofs.rdb = ndev->mw[1].vbase +
@@ -688,8 +713,21 @@
 			 */
 			writeq(ndev->mw[1].bar_sz + 0x1000, ndev->reg_base +
 			       SNB_PBAR4LMT_OFFSET);
+			/* HW errata on the Limit registers.  They can only be
+			 * written when the base register is 4GB aligned and
+			 * < 32bit.  This should already be the case based on the
+			 * driver defaults, but write the Limit registers first
+			 * just in case.
+			 */
 		} else {
 			ndev->limits.max_mw = SNB_MAX_MW;
+
+			/* HW Errata on bit 14 of b2bdoorbell register.  Writes
+			 * will not be mirrored to the remote system.  Shrink
+			 * the number of bits by one, since bit 14 is the last
+			 * bit.
+			 */
+			ndev->limits.max_db_bits = SNB_MAX_DB_BITS - 1;
 			ndev->reg_ofs.spad_write = ndev->reg_base +
 						   SNB_B2B_SPAD_OFFSET;
 			ndev->reg_ofs.rdb = ndev->reg_base +
@@ -699,6 +737,12 @@
 			 * something silly
 			 */
 			writeq(0, ndev->reg_base + SNB_PBAR4LMT_OFFSET);
+			/* HW errata on the Limit registers.  They can only be
+			 * written when the base register is 4GB aligned and
+			 * < 32bit.  This should already be the case based on the
+			 * driver defaults, but write the Limit registers first
+			 * just in case.
+			 */
 		}
 
 		/* The Xeon errata workaround requires setting SBAR Base
@@ -769,6 +813,7 @@
 		 * have an equal amount.
 		 */
 		ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
+		ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
 		/* Note: The SDOORBELL is the cause of the errata.  You REALLY
 		 * don't want to touch it.
 		 */
@@ -793,6 +838,7 @@
 		 * have an equal amount.
 		 */
 		ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
+		ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
 		ndev->reg_ofs.rdb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
 		ndev->reg_ofs.ldb = ndev->reg_base + SNB_SDOORBELL_OFFSET;
 		ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_SDBMSK_OFFSET;
@@ -819,7 +865,6 @@
 	ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_SLINK_STATUS_OFFSET;
 	ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET;
 
-	ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
 	ndev->limits.msix_cnt = SNB_MSIX_CNT;
 	ndev->bits_per_vector = SNB_DB_BITS_PER_VEC;
 
@@ -934,12 +979,16 @@
 {
 	struct ntb_db_cb *db_cb = data;
 	struct ntb_device *ndev = db_cb->ndev;
+	unsigned long mask;
 
 	dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
 		db_cb->db_num);
 
-	if (db_cb->callback)
-		db_cb->callback(db_cb->data, db_cb->db_num);
+	mask = readw(ndev->reg_ofs.ldb_mask);
+	set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+	writew(mask, ndev->reg_ofs.ldb_mask);
+
+	tasklet_schedule(&db_cb->irq_work);
 
 	/* No need to check for the specific HB irq, any interrupt means
 	 * we're connected.
@@ -955,12 +1004,16 @@
 {
 	struct ntb_db_cb *db_cb = data;
 	struct ntb_device *ndev = db_cb->ndev;
+	unsigned long mask;
 
 	dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
 		db_cb->db_num);
 
-	if (db_cb->callback)
-		db_cb->callback(db_cb->data, db_cb->db_num);
+	mask = readw(ndev->reg_ofs.ldb_mask);
+	set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+	writew(mask, ndev->reg_ofs.ldb_mask);
+
+	tasklet_schedule(&db_cb->irq_work);
 
 	/* On Sandybridge, there are 16 bits in the interrupt register
 	 * but only 4 vectors.  So, 5 bits are assigned to the first 3
@@ -986,7 +1039,7 @@
 		dev_err(&ndev->pdev->dev, "Error determining link status\n");
 
 	/* bit 15 is always the link bit */
-	writew(1 << ndev->limits.max_db_bits, ndev->reg_ofs.ldb);
+	writew(1 << SNB_LINK_DB, ndev->reg_ofs.ldb);
 
 	return IRQ_HANDLED;
 }
@@ -1075,6 +1128,10 @@
 			 "Only %d MSI-X vectors.  Limiting the number of queues to that number.\n",
 			 rc);
 		msix_entries = rc;
+
+		rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
+		if (rc)
+			goto err1;
 	}
 
 	for (i = 0; i < msix_entries; i++) {
@@ -1176,9 +1233,10 @@
 	 */
 	if (ndev->hw_type == BWD_HW)
 		writeq(~0, ndev->reg_ofs.ldb_mask);
-	else
-		writew(~(1 << ndev->limits.max_db_bits),
-		       ndev->reg_ofs.ldb_mask);
+	else {
+		u16 var = 1 << SNB_LINK_DB;
+		writew(~var, ndev->reg_ofs.ldb_mask);
+	}
 
 	rc = ntb_setup_msix(ndev);
 	if (!rc)
@@ -1286,6 +1344,39 @@
 	}
 }
 
+static void ntb_hw_link_up(struct ntb_device *ndev)
+{
+	if (ndev->conn_type == NTB_CONN_TRANSPARENT)
+		ntb_link_event(ndev, NTB_LINK_UP);
+	else {
+		u32 ntb_cntl;
+
+		/* Let's bring the NTB link up */
+		ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
+		ntb_cntl &= ~(NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK);
+		ntb_cntl |= NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP;
+		ntb_cntl |= NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP;
+		writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+	}
+}
+
+static void ntb_hw_link_down(struct ntb_device *ndev)
+{
+	u32 ntb_cntl;
+
+	if (ndev->conn_type == NTB_CONN_TRANSPARENT) {
+		ntb_link_event(ndev, NTB_LINK_DOWN);
+		return;
+	}
+
+	/* Bring NTB link down */
+	ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
+	ntb_cntl &= ~(NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP);
+	ntb_cntl &= ~(NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP);
+	ntb_cntl |= NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK;
+	writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+}
+
 static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct ntb_device *ndev;
@@ -1374,9 +1465,7 @@
 	if (rc)
 		goto err6;
 
-	/* Let's bring the NTB link up */
-	writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP,
-	       ndev->reg_ofs.lnk_cntl);
+	ntb_hw_link_up(ndev);
 
 	return 0;
 
@@ -1406,12 +1495,8 @@
 {
 	struct ntb_device *ndev = pci_get_drvdata(pdev);
 	int i;
-	u32 ntb_cntl;
 
-	/* Bring NTB link down */
-	ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
-	ntb_cntl |= NTB_CNTL_LINK_DISABLE;
-	writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+	ntb_hw_link_down(ndev);
 
 	ntb_transport_free(ndev->ntb_transport);
 
diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h
index 0a31ced..bbdb7ed 100644
--- a/drivers/ntb/ntb_hw.h
+++ b/drivers/ntb/ntb_hw.h
@@ -106,10 +106,11 @@
 };
 
 struct ntb_db_cb {
-	void (*callback) (void *data, int db_num);
+	int (*callback)(void *data, int db_num);
 	unsigned int db_num;
 	void *data;
 	struct ntb_device *ndev;
+	struct tasklet_struct irq_work;
 };
 
 struct ntb_device {
@@ -228,8 +229,8 @@
 void ntb_unregister_transport(struct ntb_device *ndev);
 void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr);
 int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
-			     void *data, void (*db_cb_func) (void *data,
-							     int db_num));
+			     void *data, int (*db_cb_func)(void *data,
+							   int db_num));
 void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx);
 int ntb_register_event_callback(struct ntb_device *ndev,
 				void (*event_cb_func) (void *handle,
diff --git a/drivers/ntb/ntb_regs.h b/drivers/ntb/ntb_regs.h
index aa4bdd3..9774506 100644
--- a/drivers/ntb/ntb_regs.h
+++ b/drivers/ntb/ntb_regs.h
@@ -55,6 +55,7 @@
 #define SNB_MAX_COMPAT_SPADS	16
 /* Reserve the uppermost bit for link interrupt */
 #define SNB_MAX_DB_BITS		15
+#define SNB_LINK_DB		15
 #define SNB_DB_BITS_PER_VEC	5
 #define SNB_MAX_MW		2
 #define SNB_ERRATA_MAX_MW	1
@@ -75,9 +76,6 @@
 #define SNB_SBAR2XLAT_OFFSET	0x0030
 #define SNB_SBAR4XLAT_OFFSET	0x0038
 #define SNB_SBAR0BASE_OFFSET	0x0040
-#define SNB_SBAR0BASE_OFFSET	0x0040
-#define SNB_SBAR2BASE_OFFSET	0x0048
-#define SNB_SBAR4BASE_OFFSET	0x0050
 #define SNB_SBAR2BASE_OFFSET	0x0048
 #define SNB_SBAR4BASE_OFFSET	0x0050
 #define SNB_NTBCNTL_OFFSET	0x0058
@@ -145,11 +143,13 @@
 #define BWD_LTSSMSTATEJMP_FORCEDETECT	(1 << 2)
 #define BWD_IBIST_ERR_OFLOW	0x7FFF7FFF
 
-#define NTB_CNTL_CFG_LOCK	(1 << 0)
-#define NTB_CNTL_LINK_DISABLE	(1 << 1)
-#define NTB_CNTL_BAR23_SNOOP	(1 << 2)
-#define NTB_CNTL_BAR45_SNOOP	(1 << 6)
-#define BWD_CNTL_LINK_DOWN	(1 << 16)
+#define NTB_CNTL_CFG_LOCK		(1 << 0)
+#define NTB_CNTL_LINK_DISABLE		(1 << 1)
+#define NTB_CNTL_S2P_BAR23_SNOOP	(1 << 2)
+#define NTB_CNTL_P2S_BAR23_SNOOP	(1 << 4)
+#define NTB_CNTL_S2P_BAR45_SNOOP	(1 << 6)
+#define NTB_CNTL_P2S_BAR45_SNOOP	(1 << 8)
+#define BWD_CNTL_LINK_DOWN		(1 << 16)
 
 #define NTB_PPD_OFFSET		0x00D4
 #define SNB_PPD_CONN_TYPE	0x0003
diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
index d0222f1..3217f39 100644
--- a/drivers/ntb/ntb_transport.c
+++ b/drivers/ntb/ntb_transport.c
@@ -119,7 +119,6 @@
 
 	void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data,
 			    void *data, int len);
-	struct tasklet_struct rx_work;
 	struct list_head rx_pend_q;
 	struct list_head rx_free_q;
 	spinlock_t ntb_rx_pend_q_lock;
@@ -584,11 +583,8 @@
 	return 0;
 }
 
-static void ntb_qp_link_cleanup(struct work_struct *work)
+static void ntb_qp_link_cleanup(struct ntb_transport_qp *qp)
 {
-	struct ntb_transport_qp *qp = container_of(work,
-						   struct ntb_transport_qp,
-						   link_cleanup);
 	struct ntb_transport *nt = qp->transport;
 	struct pci_dev *pdev = ntb_query_pdev(nt->ndev);
 
@@ -602,6 +598,16 @@
 
 	dev_info(&pdev->dev, "qp %d: Link Down\n", qp->qp_num);
 	qp->qp_link = NTB_LINK_DOWN;
+}
+
+static void ntb_qp_link_cleanup_work(struct work_struct *work)
+{
+	struct ntb_transport_qp *qp = container_of(work,
+						   struct ntb_transport_qp,
+						   link_cleanup);
+	struct ntb_transport *nt = qp->transport;
+
+	ntb_qp_link_cleanup(qp);
 
 	if (nt->transport_link == NTB_LINK_UP)
 		schedule_delayed_work(&qp->link_work,
@@ -613,22 +619,20 @@
 	schedule_work(&qp->link_cleanup);
 }
 
-static void ntb_transport_link_cleanup(struct work_struct *work)
+static void ntb_transport_link_cleanup(struct ntb_transport *nt)
 {
-	struct ntb_transport *nt = container_of(work, struct ntb_transport,
-						link_cleanup);
 	int i;
 
+	/* Pass along the info to any clients */
+	for (i = 0; i < nt->max_qps; i++)
+		if (!test_bit(i, &nt->qp_bitmap))
+			ntb_qp_link_cleanup(&nt->qps[i]);
+
 	if (nt->transport_link == NTB_LINK_DOWN)
 		cancel_delayed_work_sync(&nt->link_work);
 	else
 		nt->transport_link = NTB_LINK_DOWN;
 
-	/* Pass along the info to any clients */
-	for (i = 0; i < nt->max_qps; i++)
-		if (!test_bit(i, &nt->qp_bitmap))
-			ntb_qp_link_down(&nt->qps[i]);
-
 	/* The scratchpad registers keep the values if the remote side
 	 * goes down, blast them now to give them a sane value the next
 	 * time they are accessed
@@ -637,6 +641,14 @@
 		ntb_write_local_spad(nt->ndev, i, 0);
 }
 
+static void ntb_transport_link_cleanup_work(struct work_struct *work)
+{
+	struct ntb_transport *nt = container_of(work, struct ntb_transport,
+						link_cleanup);
+
+	ntb_transport_link_cleanup(nt);
+}
+
 static void ntb_transport_event_callback(void *data, enum ntb_hw_event event)
 {
 	struct ntb_transport *nt = data;
@@ -880,7 +892,7 @@
 	}
 
 	INIT_DELAYED_WORK(&qp->link_work, ntb_qp_link_work);
-	INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup);
+	INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup_work);
 
 	spin_lock_init(&qp->ntb_rx_pend_q_lock);
 	spin_lock_init(&qp->ntb_rx_free_q_lock);
@@ -936,7 +948,7 @@
 	}
 
 	INIT_DELAYED_WORK(&nt->link_work, ntb_transport_link_work);
-	INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup);
+	INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup_work);
 
 	rc = ntb_register_event_callback(nt->ndev,
 					 ntb_transport_event_callback);
@@ -972,7 +984,7 @@
 	struct ntb_device *ndev = nt->ndev;
 	int i;
 
-	nt->transport_link = NTB_LINK_DOWN;
+	ntb_transport_link_cleanup(nt);
 
 	/* verify that all the qp's are freed */
 	for (i = 0; i < nt->max_qps; i++) {
@@ -1188,11 +1200,14 @@
 	goto out;
 }
 
-static void ntb_transport_rx(unsigned long data)
+static int ntb_transport_rxc_db(void *data, int db_num)
 {
-	struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data;
+	struct ntb_transport_qp *qp = data;
 	int rc, i;
 
+	dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n",
+		__func__, db_num);
+
 	/* Limit the number of packets processed in a single interrupt to
 	 * provide fairness to others
 	 */
@@ -1204,16 +1219,8 @@
 
 	if (qp->dma_chan)
 		dma_async_issue_pending(qp->dma_chan);
-}
 
-static void ntb_transport_rxc_db(void *data, int db_num)
-{
-	struct ntb_transport_qp *qp = data;
-
-	dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n",
-		__func__, db_num);
-
-	tasklet_schedule(&qp->rx_work);
+	return i;
 }
 
 static void ntb_tx_copy_callback(void *data)
@@ -1432,11 +1439,12 @@
 	qp->tx_handler = handlers->tx_handler;
 	qp->event_handler = handlers->event_handler;
 
+	dmaengine_get();
 	qp->dma_chan = dma_find_channel(DMA_MEMCPY);
-	if (!qp->dma_chan)
+	if (!qp->dma_chan) {
+		dmaengine_put();
 		dev_info(&pdev->dev, "Unable to allocate DMA channel, using CPU instead\n");
-	else
-		dmaengine_get();
+	}
 
 	for (i = 0; i < NTB_QP_DEF_NUM_ENTRIES; i++) {
 		entry = kzalloc(sizeof(struct ntb_queue_entry), GFP_ATOMIC);
@@ -1458,25 +1466,23 @@
 			     &qp->tx_free_q);
 	}
 
-	tasklet_init(&qp->rx_work, ntb_transport_rx, (unsigned long) qp);
-
 	rc = ntb_register_db_callback(qp->ndev, free_queue, qp,
 				      ntb_transport_rxc_db);
 	if (rc)
-		goto err3;
+		goto err2;
 
 	dev_info(&pdev->dev, "NTB Transport QP %d created\n", qp->qp_num);
 
 	return qp;
 
-err3:
-	tasklet_disable(&qp->rx_work);
 err2:
 	while ((entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q)))
 		kfree(entry);
 err1:
 	while ((entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q)))
 		kfree(entry);
+	if (qp->dma_chan)
+		dmaengine_put();
 	set_bit(free_queue, &nt->qp_bitmap);
 err:
 	return NULL;
@@ -1515,7 +1521,6 @@
 	}
 
 	ntb_unregister_db_callback(qp->ndev, qp->qp_num);
-	tasklet_disable(&qp->rx_work);
 
 	cancel_delayed_work_sync(&qp->link_work);
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b3b1b9a..3a02717 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -9,10 +9,6 @@
  *
  *  Init/reset quirks for USB host controllers should be in the
  *  USB quirks file, where their drivers can access reuse it.
- *
- *  The bridge optimization stuff has been removed. If you really
- *  have a silly BIOS which is unable to set your host bridge right,
- *  use the PowerTweak utility (see http://powertweak.sourceforge.net).
  */
 
 #include <linux/types.h>
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 69616ae..09fde58 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -5,3 +5,4 @@
 source "drivers/platform/goldfish/Kconfig"
 endif
 
+source "drivers/platform/chrome/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 8a44a4c..3656b7b 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_X86)		+= x86/
 obj-$(CONFIG_OLPC)		+= olpc/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
+obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
new file mode 100644
index 0000000..b13303e
--- /dev/null
+++ b/drivers/platform/chrome/Kconfig
@@ -0,0 +1,28 @@
+#
+# Platform support for Chrome OS hardware (Chromebooks and Chromeboxes)
+#
+
+menuconfig CHROME_PLATFORMS
+	bool "Platform support for Chrome hardware"
+	depends on X86
+	---help---
+	  Say Y here to get to see options for platform support for
+	  various Chromebooks and Chromeboxes. This option alone does
+	  not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if CHROME_PLATFORMS
+
+config CHROMEOS_LAPTOP
+	tristate "Chrome OS Laptop"
+	depends on I2C
+	depends on DMI
+	---help---
+	  This driver instantiates i2c and smbus devices such as
+	  light sensors and touchpads.
+
+	  If you have a supported Chromebook, choose Y or M here.
+	  The module will be called chromeos_laptop.
+
+endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
new file mode 100644
index 0000000..015e919
--- /dev/null
+++ b/drivers/platform/chrome/Makefile
@@ -0,0 +1,2 @@
+
+obj-$(CONFIG_CHROMEOS_LAPTOP)	+= chromeos_laptop.o
diff --git a/drivers/platform/x86/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c
similarity index 100%
rename from drivers/platform/x86/chromeos_laptop.c
rename to drivers/platform/chrome/chromeos_laptop.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b51a746..d9dcd37 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -79,17 +79,6 @@
 
 	  If you have an ACPI-compatible ASUS laptop, say Y or M here.
 
-config CHROMEOS_LAPTOP
-	tristate "Chrome OS Laptop"
-	depends on I2C
-	depends on DMI
-	---help---
-	  This driver instantiates i2c and smbus devices such as
-	  light sensors and touchpads.
-
-	  If you have a supported Chromebook, choose Y or M here.
-	  The module will be called chromeos_laptop.
-
 config DELL_LAPTOP
 	tristate "Dell Laptop Extras"
 	depends on X86
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 5dbe1932..f0e6aa4 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -50,7 +50,6 @@
 obj-$(CONFIG_INTEL_OAKTRAIL)	+= intel_oaktrail.o
 obj-$(CONFIG_SAMSUNG_Q10)	+= samsung-q10.o
 obj-$(CONFIG_APPLE_GMUX)	+= apple-gmux.o
-obj-$(CONFIG_CHROMEOS_LAPTOP)	+= chromeos_laptop.o
 obj-$(CONFIG_INTEL_RST)		+= intel-rst.o
 obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
 
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 0e9c169..594323a 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -1494,10 +1494,9 @@
 	int error;
 
 	input = input_allocate_device();
-	if (!input) {
-		pr_warn("Unable to allocate input device\n");
+	if (!input)
 		return -ENOMEM;
-	}
+
 	input->name = "Asus Laptop extra buttons";
 	input->phys = ASUS_LAPTOP_FILE "/input0";
 	input->id.bustype = BUS_HOST;
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index bb77e18..c608b1d 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/dmi.h>
 #include <linux/io.h>
+#include <linux/rfkill.h>
 #include <linux/power_supply.h>
 #include <linux/acpi.h>
 #include <linux/mm.h>
@@ -89,6 +90,13 @@
 
 static struct platform_device *platform_device;
 static struct backlight_device *dell_backlight_device;
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bluetooth_rfkill;
+static struct rfkill *wwan_rfkill;
+static bool force_rfkill;
+
+module_param(force_rfkill, bool, 0444);
+MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models");
 
 static const struct dmi_system_id dell_device_table[] __initconst = {
 	{
@@ -355,6 +363,108 @@
 	return buffer;
 }
 
+/* Derived from information in DellWirelessCtl.cpp:
+   Class 17, select 11 is radio control. It returns an array of 32-bit values.
+
+   Input byte 0 = 0: Wireless information
+
+   result[0]: return code
+   result[1]:
+     Bit 0:      Hardware switch supported
+     Bit 1:      Wifi locator supported
+     Bit 2:      Wifi is supported
+     Bit 3:      Bluetooth is supported
+     Bit 4:      WWAN is supported
+     Bit 5:      Wireless keyboard supported
+     Bits 6-7:   Reserved
+     Bit 8:      Wifi is installed
+     Bit 9:      Bluetooth is installed
+     Bit 10:     WWAN is installed
+     Bits 11-15: Reserved
+     Bit 16:     Hardware switch is on
+     Bit 17:     Wifi is blocked
+     Bit 18:     Bluetooth is blocked
+     Bit 19:     WWAN is blocked
+     Bits 20-31: Reserved
+   result[2]: NVRAM size in bytes
+   result[3]: NVRAM format version number
+
+   Input byte 0 = 2: Wireless switch configuration
+   result[0]: return code
+   result[1]:
+     Bit 0:      Wifi controlled by switch
+     Bit 1:      Bluetooth controlled by switch
+     Bit 2:      WWAN controlled by switch
+     Bits 3-6:   Reserved
+     Bit 7:      Wireless switch config locked
+     Bit 8:      Wifi locator enabled
+     Bits 9-14:  Reserved
+     Bit 15:     Wifi locator setting locked
+     Bits 16-31: Reserved
+*/
+
+static int dell_rfkill_set(void *data, bool blocked)
+{
+	int disable = blocked ? 1 : 0;
+	unsigned long radio = (unsigned long)data;
+	int hwswitch_bit = (unsigned long)data - 1;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+
+	/* If the hardware switch controls this radio, and the hardware
+	   switch is disabled, always disable the radio */
+	if ((hwswitch_state & BIT(hwswitch_bit)) &&
+	    !(buffer->output[1] & BIT(16)))
+		disable = 1;
+
+	buffer->input[0] = (1 | (radio<<8) | (disable << 16));
+	dell_send_request(buffer, 17, 11);
+
+	release_buffer();
+	return 0;
+}
+
+/* Must be called with the buffer held */
+static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio,
+					int status)
+{
+	if (status & BIT(0)) {
+		/* Has hw-switch, sync sw_state to BIOS */
+		int block = rfkill_blocked(rfkill);
+		buffer->input[0] = (1 | (radio << 8) | (block << 16));
+		dell_send_request(buffer, 17, 11);
+	} else {
+		/* No hw-switch, sync BIOS state to sw_state */
+		rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16)));
+	}
+}
+
+static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio,
+					int status)
+{
+	if (hwswitch_state & (BIT(radio - 1)))
+		rfkill_set_hw_state(rfkill, !(status & BIT(16)));
+}
+
+static void dell_rfkill_query(struct rfkill *rfkill, void *data)
+{
+	int status;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+	status = buffer->output[1];
+
+	dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
+
+	release_buffer();
+}
+
+static const struct rfkill_ops dell_rfkill_ops = {
+	.set_block = dell_rfkill_set,
+	.query = dell_rfkill_query,
+};
+
 static struct dentry *dell_laptop_dir;
 
 static int dell_debugfs_show(struct seq_file *s, void *data)
@@ -424,6 +534,136 @@
 	.release = single_release,
 };
 
+static void dell_update_rfkill(struct work_struct *ignored)
+{
+	int status;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+	status = buffer->output[1];
+
+	if (wifi_rfkill) {
+		dell_rfkill_update_hw_state(wifi_rfkill, 1, status);
+		dell_rfkill_update_sw_state(wifi_rfkill, 1, status);
+	}
+	if (bluetooth_rfkill) {
+		dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status);
+		dell_rfkill_update_sw_state(bluetooth_rfkill, 2, status);
+	}
+	if (wwan_rfkill) {
+		dell_rfkill_update_hw_state(wwan_rfkill, 3, status);
+		dell_rfkill_update_sw_state(wwan_rfkill, 3, status);
+	}
+
+	release_buffer();
+}
+static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
+
+
+static int __init dell_setup_rfkill(void)
+{
+	int status;
+	int ret;
+	const char *product;
+
+	/*
+	 * rfkill causes trouble on various non Latitudes, according to Dell
+	 * actually testing the rfkill functionality is only done on Latitudes.
+	 */
+	product = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!force_rfkill && (!product || strncmp(product, "Latitude", 8)))
+		return 0;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+	status = buffer->output[1];
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	hwswitch_state = buffer->output[1];
+	release_buffer();
+
+	if (!(status & BIT(0))) {
+		if (force_rfkill) {
+			/* No hwsitch, clear all hw-controlled bits */
+			hwswitch_state &= ~7;
+		} else {
+			/* rfkill is only tested on laptops with a hwswitch */
+			return 0;
+		}
+	}
+
+	if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
+		wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev,
+					   RFKILL_TYPE_WLAN,
+					   &dell_rfkill_ops, (void *) 1);
+		if (!wifi_rfkill) {
+			ret = -ENOMEM;
+			goto err_wifi;
+		}
+		ret = rfkill_register(wifi_rfkill);
+		if (ret)
+			goto err_wifi;
+	}
+
+	if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
+		bluetooth_rfkill = rfkill_alloc("dell-bluetooth",
+						&platform_device->dev,
+						RFKILL_TYPE_BLUETOOTH,
+						&dell_rfkill_ops, (void *) 2);
+		if (!bluetooth_rfkill) {
+			ret = -ENOMEM;
+			goto err_bluetooth;
+		}
+		ret = rfkill_register(bluetooth_rfkill);
+		if (ret)
+			goto err_bluetooth;
+	}
+
+	if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
+		wwan_rfkill = rfkill_alloc("dell-wwan",
+					   &platform_device->dev,
+					   RFKILL_TYPE_WWAN,
+					   &dell_rfkill_ops, (void *) 3);
+		if (!wwan_rfkill) {
+			ret = -ENOMEM;
+			goto err_wwan;
+		}
+		ret = rfkill_register(wwan_rfkill);
+		if (ret)
+			goto err_wwan;
+	}
+
+	return 0;
+err_wwan:
+	rfkill_destroy(wwan_rfkill);
+	if (bluetooth_rfkill)
+		rfkill_unregister(bluetooth_rfkill);
+err_bluetooth:
+	rfkill_destroy(bluetooth_rfkill);
+	if (wifi_rfkill)
+		rfkill_unregister(wifi_rfkill);
+err_wifi:
+	rfkill_destroy(wifi_rfkill);
+
+	return ret;
+}
+
+static void dell_cleanup_rfkill(void)
+{
+	if (wifi_rfkill) {
+		rfkill_unregister(wifi_rfkill);
+		rfkill_destroy(wifi_rfkill);
+	}
+	if (bluetooth_rfkill) {
+		rfkill_unregister(bluetooth_rfkill);
+		rfkill_destroy(bluetooth_rfkill);
+	}
+	if (wwan_rfkill) {
+		rfkill_unregister(wwan_rfkill);
+		rfkill_destroy(wwan_rfkill);
+	}
+}
+
 static int dell_send_intensity(struct backlight_device *bd)
 {
 	int ret = 0;
@@ -515,6 +755,30 @@
 	led_classdev_unregister(&touchpad_led);
 }
 
+static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
+			      struct serio *port)
+{
+	static bool extended;
+
+	if (str & 0x20)
+		return false;
+
+	if (unlikely(data == 0xe0)) {
+		extended = true;
+		return false;
+	} else if (unlikely(extended)) {
+		switch (data) {
+		case 0x8:
+			schedule_delayed_work(&dell_rfkill_work,
+					      round_jiffies_relative(HZ / 4));
+			break;
+		}
+		extended = false;
+	}
+
+	return false;
+}
+
 static int __init dell_init(void)
 {
 	int max_intensity = 0;
@@ -557,10 +821,26 @@
 	}
 	buffer = page_address(bufferpage);
 
+	ret = dell_setup_rfkill();
+
+	if (ret) {
+		pr_warn("Unable to setup rfkill\n");
+		goto fail_rfkill;
+	}
+
+	ret = i8042_install_filter(dell_laptop_i8042_filter);
+	if (ret) {
+		pr_warn("Unable to install key filter\n");
+		goto fail_filter;
+	}
+
 	if (quirks && quirks->touchpad_led)
 		touchpad_led_init(&platform_device->dev);
 
 	dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL);
+	if (dell_laptop_dir != NULL)
+		debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
+				    &dell_debugfs_fops);
 
 #ifdef CONFIG_ACPI
 	/* In the event of an ACPI backlight being available, don't
@@ -603,6 +883,11 @@
 	return 0;
 
 fail_backlight:
+	i8042_remove_filter(dell_laptop_i8042_filter);
+	cancel_delayed_work_sync(&dell_rfkill_work);
+fail_filter:
+	dell_cleanup_rfkill();
+fail_rfkill:
 	free_page((unsigned long)bufferpage);
 fail_buffer:
 	platform_device_del(platform_device);
@@ -620,7 +905,10 @@
 	debugfs_remove_recursive(dell_laptop_dir);
 	if (quirks && quirks->touchpad_led)
 		touchpad_led_exit();
+	i8042_remove_filter(dell_laptop_i8042_filter);
+	cancel_delayed_work_sync(&dell_rfkill_work);
 	backlight_device_unregister(dell_backlight_device);
+	dell_cleanup_rfkill();
 	if (platform_device) {
 		platform_device_unregister(platform_device);
 		platform_driver_unregister(&platform_driver);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index fa9a217..60e0900 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -130,7 +130,8 @@
 	KEY_BRIGHTNESSUP,	KEY_UNKNOWN,	KEY_KBDILLUMTOGGLE,
 	KEY_UNKNOWN,	KEY_SWITCHVIDEOMODE,	KEY_UNKNOWN, KEY_UNKNOWN,
 	KEY_SWITCHVIDEOMODE,	KEY_UNKNOWN,	KEY_UNKNOWN, KEY_PROG2,
-	KEY_UNKNOWN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	KEY_UNKNOWN,	KEY_UNKNOWN,	KEY_UNKNOWN,	KEY_UNKNOWN,
+	KEY_UNKNOWN,	KEY_UNKNOWN,	KEY_UNKNOWN,	KEY_MICMUTE,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
@@ -139,8 +140,8 @@
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	KEY_PROG3
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PROG3
 };
 
 static struct input_dev *dell_wmi_input_dev;
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index aefcc32..dec68e7 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -1203,10 +1203,8 @@
 	int error;
 
 	input = input_allocate_device();
-	if (!input) {
-		pr_info("Unable to allocate input device\n");
+	if (!input)
 		return -ENOMEM;
-	}
 
 	input->name = "Asus EeePC extra buttons";
 	input->phys = EEEPC_LAPTOP_FILE "/input0";
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1c86fa0..8ba8956 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -54,6 +54,7 @@
 #define HPWMI_HARDWARE_QUERY 0x4
 #define HPWMI_WIRELESS_QUERY 0x5
 #define HPWMI_HOTKEY_QUERY 0xc
+#define HPWMI_FEATURE_QUERY 0xd
 #define HPWMI_WIRELESS2_QUERY 0x1b
 #define HPWMI_POSTCODEERROR_QUERY 0x2a
 
@@ -292,6 +293,17 @@
 	return (state & 0x4) ? 1 : 0;
 }
 
+static int hp_wmi_bios_2009_later(void)
+{
+	int state = 0;
+	int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, 0, &state,
+				       sizeof(state), sizeof(state));
+	if (ret)
+		return ret;
+
+	return (state & 0x10) ? 1 : 0;
+}
+
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	enum hp_wmi_radio r = (enum hp_wmi_radio) data;
@@ -871,7 +883,7 @@
 	gps_rfkill = NULL;
 	rfkill2_count = 0;
 
-	if (hp_wmi_rfkill_setup(device))
+	if (hp_wmi_bios_2009_later() || hp_wmi_rfkill_setup(device))
 		hp_wmi_rfkill2_setup(device);
 
 	err = device_create_file(&device->dev, &dev_attr_display);
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 6788acc..19ec951 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -570,10 +570,8 @@
 	int error;
 
 	inputdev = input_allocate_device();
-	if (!inputdev) {
-		pr_info("Unable to allocate input device\n");
+	if (!inputdev)
 		return -ENOMEM;
-	}
 
 	inputdev->name = "Ideapad extra buttons";
 	inputdev->phys = "ideapad/input0";
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
index 6b18aba..8d67752 100644
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/drivers/platform/x86/intel_mid_powerbtn.c
@@ -66,10 +66,8 @@
 		return -EINVAL;
 
 	input = input_allocate_device();
-	if (!input) {
-		dev_err(&pdev->dev, "Input device allocation error\n");
+	if (!input)
 		return -ENOMEM;
-	}
 
 	input->name = pdev->name;
 	input->phys = "power-button/input0";
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index d654f83..60ea476 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -58,12 +58,56 @@
  *    message handler is called within firmware.
  */
 
-#define IPC_BASE_ADDR     0xFF11C000	/* IPC1 base register address */
-#define IPC_MAX_ADDR      0x100		/* Maximum IPC regisers */
 #define IPC_WWBUF_SIZE    20		/* IPC Write buffer Size */
 #define IPC_RWBUF_SIZE    20		/* IPC Read buffer Size */
-#define IPC_I2C_BASE      0xFF12B000	/* I2C control register base address */
-#define IPC_I2C_MAX_ADDR  0x10		/* Maximum I2C regisers */
+#define IPC_IOC	          0x100		/* IPC command register IOC bit */
+
+enum {
+	SCU_IPC_LINCROFT,
+	SCU_IPC_PENWELL,
+	SCU_IPC_CLOVERVIEW,
+	SCU_IPC_TANGIER,
+};
+
+/* intel scu ipc driver data*/
+struct intel_scu_ipc_pdata_t {
+	u32 ipc_base;
+	u32 i2c_base;
+	u32 ipc_len;
+	u32 i2c_len;
+	u8 irq_mode;
+};
+
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = {
+	[SCU_IPC_LINCROFT] = {
+		.ipc_base = 0xff11c000,
+		.i2c_base = 0xff12b000,
+		.ipc_len = 0x100,
+		.i2c_len = 0x10,
+		.irq_mode = 0,
+	},
+	[SCU_IPC_PENWELL] = {
+		.ipc_base = 0xff11c000,
+		.i2c_base = 0xff12b000,
+		.ipc_len = 0x100,
+		.i2c_len = 0x10,
+		.irq_mode = 1,
+	},
+	[SCU_IPC_CLOVERVIEW] = {
+		.ipc_base = 0xff11c000,
+		.i2c_base = 0xff12b000,
+		.ipc_len = 0x100,
+		.i2c_len = 0x10,
+		.irq_mode = 1,
+	},
+	[SCU_IPC_TANGIER] = {
+		.ipc_base = 0xff009000,
+		.i2c_base  = 0xff00d000,
+		.ipc_len  = 0x100,
+		.i2c_len = 0x10,
+		.irq_mode = 0,
+	},
+};
 
 static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
 static void ipc_remove(struct pci_dev *pdev);
@@ -72,6 +116,8 @@
 	struct pci_dev *pdev;
 	void __iomem *ipc_base;
 	void __iomem *i2c_base;
+	struct completion cmd_complete;
+	u8 irq_mode;
 };
 
 static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
@@ -98,6 +144,10 @@
  */
 static inline void ipc_command(u32 cmd) /* Send ipc command */
 {
+	if (ipcdev.irq_mode) {
+		reinit_completion(&ipcdev.cmd_complete);
+		writel(cmd | IPC_IOC, ipcdev.ipc_base);
+	}
 	writel(cmd, ipcdev.ipc_base);
 }
 
@@ -156,6 +206,30 @@
 	return 0;
 }
 
+/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
+static inline int ipc_wait_for_interrupt(void)
+{
+	int status;
+
+	if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) {
+		struct device *dev = &ipcdev.pdev->dev;
+		dev_err(dev, "IPC timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	status = ipc_read_status();
+
+	if ((status >> 1) & 1)
+		return -EIO;
+
+	return 0;
+}
+
+int intel_scu_ipc_check_status(void)
+{
+	return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop();
+}
+
 /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
 static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 {
@@ -196,8 +270,8 @@
 		ipc_command(4 << 16 |  id << 12 | 0 << 8 | op);
 	}
 
-	err = busy_loop();
-	if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
+	err = intel_scu_ipc_check_status();
+	if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
 		/* Workaround: values are read as 0 without memcpy_fromio */
 		memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
 		for (nc = 0; nc < count; nc++)
@@ -391,7 +465,7 @@
 		return -ENODEV;
 	}
 	ipc_command(sub << 12 | cmd);
-	err = busy_loop();
+	err = intel_scu_ipc_check_status();
 	mutex_unlock(&ipclock);
 	return err;
 }
@@ -425,10 +499,12 @@
 		ipc_data_writel(*in++, 4 * i);
 
 	ipc_command((inlen << 16) | (sub << 12) | cmd);
-	err = busy_loop();
+	err = intel_scu_ipc_check_status();
 
-	for (i = 0; i < outlen; i++)
-		*out++ = ipc_data_readl(4 * i);
+	if (!err) {
+		for (i = 0; i < outlen; i++)
+			*out++ = ipc_data_readl(4 * i);
+	}
 
 	mutex_unlock(&ipclock);
 	return err;
@@ -491,6 +567,9 @@
  */
 static irqreturn_t ioc(int irq, void *dev_id)
 {
+	if (ipcdev.irq_mode)
+		complete(&ipcdev.cmd_complete);
+
 	return IRQ_HANDLED;
 }
 
@@ -504,13 +583,18 @@
  */
 static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	int err;
+	int err, pid;
+	struct intel_scu_ipc_pdata_t *pdata;
 	resource_size_t pci_resource;
 
 	if (ipcdev.pdev)		/* We support only one SCU */
 		return -EBUSY;
 
+	pid = id->driver_data;
+	pdata = &intel_scu_ipc_pdata[pid];
+
 	ipcdev.pdev = pci_dev_get(dev);
+	ipcdev.irq_mode = pdata->irq_mode;
 
 	err = pci_enable_device(dev);
 	if (err)
@@ -524,14 +608,16 @@
 	if (!pci_resource)
 		return -ENOMEM;
 
+	init_completion(&ipcdev.cmd_complete);
+
 	if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
 		return -EBUSY;
 
-	ipcdev.ipc_base = ioremap_nocache(IPC_BASE_ADDR, IPC_MAX_ADDR);
+	ipcdev.ipc_base = ioremap_nocache(pdata->ipc_base, pdata->ipc_len);
 	if (!ipcdev.ipc_base)
 		return -ENOMEM;
 
-	ipcdev.i2c_base = ioremap_nocache(IPC_I2C_BASE, IPC_I2C_MAX_ADDR);
+	ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
 	if (!ipcdev.i2c_base) {
 		iounmap(ipcdev.ipc_base);
 		return -ENOMEM;
@@ -564,7 +650,10 @@
 }
 
 static DEFINE_PCI_DEVICE_TABLE(pci_ids) = {
-	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
+	{PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT},
+	{PCI_VDEVICE(INTEL, 0x080e), SCU_IPC_PENWELL},
+	{PCI_VDEVICE(INTEL, 0x08ea), SCU_IPC_CLOVERVIEW},
+	{PCI_VDEVICE(INTEL, 0x11a0), SCU_IPC_TANGIER},
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 10d12b2..3008fd2 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -490,11 +490,8 @@
 	int error;
 
 	input_dev = input_allocate_device();
-	if (!input_dev) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Couldn't allocate input device for hotkey"));
+	if (!input_dev)
 		return -ENOMEM;
-	}
 
 	input_dev->name = ACPI_PCC_DRIVER_NAME;
 	input_dev->phys = ACPI_PCC_INPUT_PHYS;
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 47caab0..fb233ae 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -140,12 +140,12 @@
 		 "on the model (default: no change from current value)");
 
 #ifdef CONFIG_PM_SLEEP
-static void sony_nc_kbd_backlight_resume(void);
 static void sony_nc_thermal_resume(void);
 #endif
 static int sony_nc_kbd_backlight_setup(struct platform_device *pd,
 		unsigned int handle);
-static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd);
+static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd,
+		unsigned int handle);
 
 static int sony_nc_battery_care_setup(struct platform_device *pd,
 		unsigned int handle);
@@ -304,8 +304,8 @@
 	KEY_FN_F10,	/* 14 SONYPI_EVENT_FNKEY_F10 */
 	KEY_FN_F11,	/* 15 SONYPI_EVENT_FNKEY_F11 */
 	KEY_FN_F12,	/* 16 SONYPI_EVENT_FNKEY_F12 */
-	KEY_FN_F1,	/* 17 SONYPI_EVENT_FNKEY_1 */
-	KEY_FN_F2,	/* 18 SONYPI_EVENT_FNKEY_2 */
+	KEY_FN_1,	/* 17 SONYPI_EVENT_FNKEY_1 */
+	KEY_FN_2,	/* 18 SONYPI_EVENT_FNKEY_2 */
 	KEY_FN_D,	/* 19 SONYPI_EVENT_FNKEY_D */
 	KEY_FN_E,	/* 20 SONYPI_EVENT_FNKEY_E */
 	KEY_FN_F,	/* 21 SONYPI_EVENT_FNKEY_F */
@@ -1444,7 +1444,7 @@
 		case 0x014b:
 		case 0x014c:
 		case 0x0163:
-			sony_nc_kbd_backlight_cleanup(pd);
+			sony_nc_kbd_backlight_cleanup(pd, handle);
 			break;
 		default:
 			continue;
@@ -1486,13 +1486,6 @@
 		case 0x0135:
 			sony_nc_rfkill_update();
 			break;
-		case 0x0137:
-		case 0x0143:
-		case 0x014b:
-		case 0x014c:
-		case 0x0163:
-			sony_nc_kbd_backlight_resume();
-			break;
 		default:
 			continue;
 		}
@@ -1822,6 +1815,12 @@
 	int result;
 	int ret = 0;
 
+	if (kbdbl_ctl) {
+		pr_warn("handle 0x%.4x: keyboard backlight setup already done for 0x%.4x\n",
+				handle, kbdbl_ctl->handle);
+		return -EBUSY;
+	}
+
 	/* verify the kbd backlight presence, these handles are not used for
 	 * keyboard backlight only
 	 */
@@ -1881,9 +1880,10 @@
 	return ret;
 }
 
-static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd)
+static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd,
+		unsigned int handle)
 {
-	if (kbdbl_ctl) {
+	if (kbdbl_ctl && handle == kbdbl_ctl->handle) {
 		device_remove_file(&pd->dev, &kbdbl_ctl->mode_attr);
 		device_remove_file(&pd->dev, &kbdbl_ctl->timeout_attr);
 		kfree(kbdbl_ctl);
@@ -1891,25 +1891,6 @@
 	}
 }
 
-#ifdef CONFIG_PM_SLEEP
-static void sony_nc_kbd_backlight_resume(void)
-{
-	int ignore = 0;
-
-	if (!kbdbl_ctl)
-		return;
-
-	if (kbdbl_ctl->mode == 0)
-		sony_call_snc_handle(kbdbl_ctl->handle, kbdbl_ctl->base,
-				&ignore);
-
-	if (kbdbl_ctl->timeout != 0)
-		sony_call_snc_handle(kbdbl_ctl->handle,
-				(kbdbl_ctl->base + 0x200) |
-				(kbdbl_ctl->timeout << 0x10), &ignore);
-}
-#endif
-
 struct battery_care_control {
 	struct device_attribute attrs[2];
 	unsigned int handle;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 05e046a..58b0274 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6438,7 +6438,12 @@
 #define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control"
 #define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME
 
-static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */
+#if SNDRV_CARDS <= 32
+#define DEFAULT_ALSA_IDX		~((1 << (SNDRV_CARDS - 3)) - 1)
+#else
+#define DEFAULT_ALSA_IDX		~((1 << (32 - 3)) - 1)
+#endif
+static int alsa_index = DEFAULT_ALSA_IDX; /* last three slots */
 static char *alsa_id = "ThinkPadEC";
 static bool alsa_enable = SNDRV_DEFAULT_ENABLE1;
 
@@ -9163,7 +9168,6 @@
 	mutex_init(&tpacpi_inputdev_send_mutex);
 	tpacpi_inputdev = input_allocate_device();
 	if (!tpacpi_inputdev) {
-		pr_err("unable to allocate input device\n");
 		thinkpad_acpi_module_exit();
 		return -ENOMEM;
 	} else {
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 67897c8..e597de0 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -97,10 +97,8 @@
 	int error;
 
 	input = input_allocate_device();
-	if (!input) {
-		pr_err("Unable to allocate input device\n");
+	if (!input)
 		return -ENOMEM;
-	}
 
 	input->name = "Topstar Laptop extra buttons";
 	input->phys = "topstar/input0";
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 0cfadb65..7fce391 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -975,10 +975,8 @@
 	u32 hci_result;
 
 	dev->hotkey_dev = input_allocate_device();
-	if (!dev->hotkey_dev) {
-		pr_info("Unable to register input device\n");
+	if (!dev->hotkey_dev)
 		return -ENOMEM;
-	}
 
 	dev->hotkey_dev->name = "Toshiba input device";
 	dev->hotkey_dev->phys = "toshiba_acpi/input0";
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 62e8c22..c2e7b26 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -672,8 +672,10 @@
 	struct wmi_block *wblock;
 
 	wblock = dev_get_drvdata(dev);
-	if (!wblock)
-		return -ENOMEM;
+	if (!wblock) {
+		strcat(buf, "\n");
+		return strlen(buf);
+	}
 
 	wmi_gtoa(wblock->gblock.guid, guid_string);
 
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 724706a..fd3154d 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -174,6 +174,33 @@
 	.owner = THIS_MODULE,
 };
 
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+	REGULATOR_LINEAR_RANGE(900000,  0,    0x14, 25000),
+	REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+	.name = "MICVDD",
+	.supply_name = "CPVDD",
+	.type = REGULATOR_VOLTAGE,
+	.n_voltages = 40,
+	.ops = &arizona_micsupp_ops,
+
+	.vsel_reg = ARIZONA_LDO2_CONTROL_1,
+	.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+	.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.enable_mask = ARIZONA_CPMIC_ENA,
+	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+	.linear_ranges = arizona_micsupp_ext_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
 static const struct regulator_init_data arizona_micsupp_default = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
@@ -186,9 +213,22 @@
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_BYPASS,
+		.min_uV = 900000,
+		.max_uV = 3300000,
+	},
+
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_micsupp_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *desc;
 	struct regulator_config config = { };
 	struct arizona_micsupp *micsupp;
 	int ret;
@@ -207,7 +247,17 @@
 	 * default init_data for it.  This will be overridden with
 	 * platform data if provided.
 	 */
-	micsupp->init_data = arizona_micsupp_default;
+	switch (arizona->type) {
+	case WM5110:
+		desc = &arizona_micsupp_ext;
+		micsupp->init_data = arizona_micsupp_ext_default;
+		break;
+	default:
+		desc = &arizona_micsupp;
+		micsupp->init_data = arizona_micsupp_default;
+		break;
+	}
+
 	micsupp->init_data.consumer_supplies = &micsupp->supply;
 	micsupp->supply.supply = "MICVDD";
 	micsupp->supply.dev_name = dev_name(arizona->dev);
@@ -226,7 +276,7 @@
 			   ARIZONA_CPMIC_BYPASS, 0);
 
 	micsupp->regulator = devm_regulator_register(&pdev->dev,
-						     &arizona_micsupp,
+						     desc,
 						     &config);
 	if (IS_ERR(micsupp->regulator)) {
 		ret = PTR_ERR(micsupp->regulator);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 6382f0a..3fe1313 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2184,6 +2184,9 @@
 	struct regulator_ops	*ops = rdev->desc->ops;
 	int			ret;
 
+	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+		return rdev->desc->fixed_uV;
+
 	if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 04406a91..234960d 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -139,6 +139,7 @@
 	struct property *prop;
 	const char *regtype;
 	int proplen, gpio, i;
+	int ret;
 
 	config = devm_kzalloc(dev,
 			sizeof(struct gpio_regulator_config),
@@ -202,7 +203,11 @@
 	}
 	config->nr_states = i;
 
-	of_property_read_string(np, "regulator-type", &regtype);
+	ret = of_property_read_string(np, "regulator-type", &regtype);
+	if (ret < 0) {
+		dev_err(dev, "Missing 'regulator-type' property\n");
+		return ERR_PTR(-EINVAL);
+	}
 
 	if (!strncmp("voltage", regtype, 7))
 		config->type = REGULATOR_VOLTAGE;
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index ba67b2c..032df37 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -308,9 +308,15 @@
 	if (ret)
 		return ret;
 
-	if (value & 0x0f) {
-		dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-		return -ENODEV;
+	switch (value & 0x0f) {
+		/* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
+		case 0x8:
+			dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
+		case 0x0:
+			break;
+		default:
+			dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+			return -ENODEV;
 	}
 
 	ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index cee7e27..95e4578 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -3224,6 +3224,8 @@
 
 	fcx_multitrack = private->features.feature[40] & 0x20;
 	data_size = blk_rq_bytes(req);
+	if (data_size % blksize)
+		return ERR_PTR(-EINVAL);
 	/* tpm write request add CBC data on each track boundary */
 	if (rq_data_dir(req) == WRITE)
 		data_size += (last_trk - first_trk) * 4;
diff --git a/drivers/staging/btmtk_usb/btmtk_usb.c b/drivers/staging/btmtk_usb/btmtk_usb.c
index 7a9bf3b..9a5ebd6 100644
--- a/drivers/staging/btmtk_usb/btmtk_usb.c
+++ b/drivers/staging/btmtk_usb/btmtk_usb.c
@@ -1284,9 +1284,8 @@
 	kfree_skb(skb);
 }
 
-static int btmtk_usb_send_frame(struct sk_buff *skb)
+static int btmtk_usb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	struct hci_dev *hdev = (struct hci_dev *)skb->dev;
 	struct btmtk_usb_data *data = hci_get_drvdata(hdev);
 	struct usb_ctrlrequest *dr;
 	struct urb *urb;
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index d041b714..2baaf1d 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -173,11 +173,11 @@
 	if (mask) {
 		if (mask & 0x00ff)
 			outb(s->state & 0xff, dev->iobase + reg);
-		if ((mask & 0xff00) & (s->n_chan > 8))
+		if ((mask & 0xff00) && (s->n_chan > 8))
 			outb((s->state >> 8) & 0xff, dev->iobase + reg + 1);
-		if ((mask & 0xff0000) & (s->n_chan > 16))
+		if ((mask & 0xff0000) && (s->n_chan > 16))
 			outb((s->state >> 16) & 0xff, dev->iobase + reg + 2);
-		if ((mask & 0xff000000) & (s->n_chan > 24))
+		if ((mask & 0xff000000) && (s->n_chan > 24))
 			outb((s->state >> 24) & 0xff, dev->iobase + reg + 3);
 	}
 
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 6815cfe..b486099 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -494,7 +494,7 @@
  * Private helper function: Write setpoint to an application DAC channel.
  */
 static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
-			 unsigned short dacdata)
+			 int16_t dacdata)
 {
 	struct s626_private *devpriv = dev->private;
 	uint16_t signmask;
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 933b01a..0adf3cf 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -465,7 +465,7 @@
 	unsigned char *rx_buf = devpriv->usb_rx_buf;
 	unsigned char *tx_buf = devpriv->usb_tx_buf;
 	int reg, cmd;
-	int ret;
+	int ret = 0;
 
 	if (devpriv->model == VMK8061_MODEL) {
 		reg = VMK8061_DO_REG;
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
index 68ded17..12f333f 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
@@ -578,7 +578,7 @@
 		 u8 **c_file, const u8 *endpoint, bool boot_case)
 {
 	long word_length;
-	int status;
+	int status = 0;
 
 	/*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/
 	word_length = get_request_value(ft1000dev);
@@ -1074,4 +1074,3 @@
 
 	return status;
 }
-
diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
index a3ea69e..34634da 100644
--- a/drivers/staging/iio/magnetometer/Kconfig
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -6,6 +6,8 @@
 config SENSORS_HMC5843
 	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to add support for the Honeywell HMC5843, HMC5883 and
 	  HMC5883L 3-Axis Magnetometer (digital compass).
diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile
index 2c3a9e1..8742432 100644
--- a/drivers/staging/imx-drm/Makefile
+++ b/drivers/staging/imx-drm/Makefile
@@ -8,4 +8,6 @@
 obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
 obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o
 obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/
-obj-$(CONFIG_DRM_IMX_IPUV3)	+= ipuv3-crtc.o ipuv3-plane.o
+
+imx-ipuv3-crtc-objs  := ipuv3-crtc.o ipuv3-plane.o
+obj-$(CONFIG_DRM_IMX_IPUV3)	+= imx-ipuv3-crtc.o
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index 51aa977..6bd015a 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -72,6 +72,7 @@
 {
 	return crtc->pipe;
 }
+EXPORT_SYMBOL_GPL(imx_drm_crtc_id);
 
 static void imx_drm_driver_lastclose(struct drm_device *drm)
 {
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5dec771..4d340f4 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -409,8 +409,8 @@
 	struct l_wait_info lwi = { 0 };
 	int rc = 0;
 
-	if (!thread_is_init(&pinger_thread) &&
-	    !thread_is_stopped(&pinger_thread))
+	if (thread_is_init(&pinger_thread) ||
+	    thread_is_stopped(&pinger_thread))
 		return -EALREADY;
 
 	ptlrpc_pinger_remove_timeouts();
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 58684da..b658c23 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -15,6 +15,8 @@
  * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -661,7 +663,7 @@
 
 	if (usb->board->flags & GO7007_USB_EZUSB) {
 		/* Reset buffer in EZ-USB */
-		dev_dbg(go->dev, "resetting EZ-USB buffers\n");
+		pr_debug("resetting EZ-USB buffers\n");
 		if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 ||
 		    go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0)
 			return -1;
@@ -689,7 +691,7 @@
 	u16 status_reg = 0;
 	int timeout = 500;
 
-	dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+	pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
 
 	for (i = 0; i < 100; ++i) {
 		r = usb_control_msg(usb->usbdev,
@@ -734,7 +736,7 @@
 	int r;
 	int timeout = 500;
 
-	dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+	pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
 
 	go->usb_buf[0] = data & 0xff;
 	go->usb_buf[1] = data >> 8;
@@ -771,7 +773,7 @@
 		go->interrupt_available = 1;
 		go->interrupt_data = __le16_to_cpu(regs[0]);
 		go->interrupt_value = __le16_to_cpu(regs[1]);
-		dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n",
+		pr_debug("ReadInterrupt: %04x %04x\n",
 				go->interrupt_value, go->interrupt_data);
 	}
 
@@ -891,7 +893,7 @@
 	int transferred, pipe;
 	int timeout = 500;
 
-	dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len);
+	pr_debug("DownloadBuffer sending %d bytes\n", len);
 
 	if (usb->board->flags & GO7007_USB_EZUSB)
 		pipe = usb_sndbulkpipe(usb->usbdev, 2);
@@ -977,7 +979,7 @@
 				!(msgs[i].flags & I2C_M_RD) &&
 				(msgs[i + 1].flags & I2C_M_RD)) {
 #ifdef GO7007_I2C_DEBUG
-			dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n",
+			pr_debug("i2c write/read %d/%d bytes on %02x\n",
 				msgs[i].len, msgs[i + 1].len, msgs[i].addr);
 #endif
 			buf[0] = 0x01;
@@ -988,7 +990,7 @@
 			buf[buf_len++] = msgs[++i].len;
 		} else if (msgs[i].flags & I2C_M_RD) {
 #ifdef GO7007_I2C_DEBUG
-			dev_dbg(go->dev, "i2c read %d bytes on %02x\n",
+			pr_debug("i2c read %d bytes on %02x\n",
 					msgs[i].len, msgs[i].addr);
 #endif
 			buf[0] = 0x01;
@@ -998,7 +1000,7 @@
 			buf_len = 4;
 		} else {
 #ifdef GO7007_I2C_DEBUG
-			dev_dbg(go->dev, "i2c write %d bytes on %02x\n",
+			pr_debug("i2c write %d bytes on %02x\n",
 					msgs[i].len, msgs[i].addr);
 #endif
 			buf[0] = 0x00;
@@ -1057,7 +1059,7 @@
 	char *name;
 	int video_pipe, i, v_urb_len;
 
-	dev_dbg(go->dev, "probing new GO7007 USB board\n");
+	pr_debug("probing new GO7007 USB board\n");
 
 	switch (id->driver_info) {
 	case GO7007_BOARDID_MATRIX_II:
@@ -1097,13 +1099,13 @@
 		board = &board_px_tv402u;
 		break;
 	case GO7007_BOARDID_LIFEVIEW_LR192:
-		dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
+		dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
 		return -ENODEV;
 		name = "Lifeview TV Walker Ultra";
 		board = &board_lifeview_lr192;
 		break;
 	case GO7007_BOARDID_SENSORAY_2250:
-		dev_info(go->dev, "Sensoray 2250 found\n");
+		dev_info(&intf->dev, "Sensoray 2250 found\n");
 		name = "Sensoray 2250/2251";
 		board = &board_sensoray_2250;
 		break;
@@ -1112,7 +1114,7 @@
 		board = &board_ads_usbav_709;
 		break;
 	default:
-		dev_err(go->dev, "unknown board ID %d!\n",
+		dev_err(&intf->dev, "unknown board ID %d!\n",
 				(unsigned int)id->driver_info);
 		return -ENODEV;
 	}
@@ -1247,7 +1249,7 @@
 					sizeof(go->name));
 			break;
 		default:
-			dev_dbg(go->dev, "unable to detect tuner type!\n");
+			pr_debug("unable to detect tuner type!\n");
 			break;
 		}
 		/* Configure tuner mode selection inputs connected
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 3066ee2..49ea76b 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -681,7 +681,8 @@
 			dev_err(nvec->dev,
 				"RX buffer overflow on %p: "
 				"Trying to write byte %u of %u\n",
-				nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE);
+				nvec->rx, nvec->rx ? nvec->rx->pos : 0,
+				NVEC_MSG_SIZE);
 		break;
 	default:
 		nvec->state = 0;
diff --git a/drivers/staging/rtl8188eu/core/rtw_ap.c b/drivers/staging/rtl8188eu/core/rtw_ap.c
index 2c678f4..2f548eb 100644
--- a/drivers/staging/rtl8188eu/core/rtw_ap.c
+++ b/drivers/staging/rtl8188eu/core/rtw_ap.c
@@ -1115,6 +1115,9 @@
 			return _FAIL;
 	}
 
+	/* fix bug of flush_cam_entry at STOP AP mode */
+	psta->state |= WIFI_AP_STATE;
+	rtw_indicate_connect(padapter);
 	pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */
 	return ret;
 }
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index 165b918..1b6d581 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig TIDSPBRIDGE
 	tristate "DSP Bridge driver"
-	depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
+	depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM && BROKEN
 	select MAILBOX
 	select OMAP2PLUS_MBOX
 	help
diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c
index aab0012..ab8b2ba 100644
--- a/drivers/staging/vt6655/hostap.c
+++ b/drivers/staging/vt6655/hostap.c
@@ -143,7 +143,8 @@
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
 			pDevice->dev->name, pDevice->apdev->name);
 	}
-	free_netdev(pDevice->apdev);
+	if (pDevice->apdev)
+		free_netdev(pDevice->apdev);
 	pDevice->apdev = NULL;
 	pDevice->bEnable8021x = false;
 	pDevice->bEnableHostWEP = false;
diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c
index 1e8b841..4aa5ef5 100644
--- a/drivers/staging/vt6656/baseband.c
+++ b/drivers/staging/vt6656/baseband.c
@@ -939,6 +939,7 @@
     u8 *                   pbyAgc;
     u16                    wLengthAgc;
     u8                    abyArray[256];
+	u8 data;
 
     ntStatus = CONTROLnsRequestIn(pDevice,
                                   MESSAGE_TYPE_READ,
@@ -1104,6 +1105,16 @@
     ControlvWriteByte(pDevice,MESSAGE_REQUEST_BBREG,0x0D,0x01);
 
     RFbRFTableDownload(pDevice);
+
+	/* Fix for TX USB resets from vendors driver */
+	CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, USB_REG4,
+		MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
+	data |= 0x2;
+
+	CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, USB_REG4,
+		MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
     return true;//ntStatus;
 }
 
diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c
index ae1676d..67ba48b 100644
--- a/drivers/staging/vt6656/hostap.c
+++ b/drivers/staging/vt6656/hostap.c
@@ -133,7 +133,8 @@
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
 		       pDevice->dev->name, pDevice->apdev->name);
 	}
-	free_netdev(pDevice->apdev);
+	if (pDevice->apdev)
+		free_netdev(pDevice->apdev);
 	pDevice->apdev = NULL;
     pDevice->bEnable8021x = false;
     pDevice->bEnableHostWEP = false;
diff --git a/drivers/staging/vt6656/rndis.h b/drivers/staging/vt6656/rndis.h
index 5e07306..5cf5e73 100644
--- a/drivers/staging/vt6656/rndis.h
+++ b/drivers/staging/vt6656/rndis.h
@@ -66,6 +66,8 @@
 
 #define VIAUSB20_PACKET_HEADER          0x04
 
+#define USB_REG4	0x604
+
 typedef struct _CMD_MESSAGE
 {
     u8        byData[256];
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 79ce363..3277d98 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -652,21 +652,30 @@
 		return -ENOMEM;
 
 	/* Do not reset an active device! */
-	if (bdev->bd_holders)
-		return -EBUSY;
+	if (bdev->bd_holders) {
+		ret = -EBUSY;
+		goto out;
+	}
 
 	ret = kstrtou16(buf, 10, &do_reset);
 	if (ret)
-		return ret;
+		goto out;
 
-	if (!do_reset)
-		return -EINVAL;
+	if (!do_reset) {
+		ret = -EINVAL;
+		goto out;
+	}
 
 	/* Make sure all pending I/O is finished */
 	fsync_bdev(bdev);
+	bdput(bdev);
 
 	zram_reset_device(zram, true);
 	return len;
+
+out:
+	bdput(bdev);
+	return ret;
 }
 
 static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c
index 1a67537..3b950e5 100644
--- a/drivers/staging/zsmalloc/zsmalloc-main.c
+++ b/drivers/staging/zsmalloc/zsmalloc-main.c
@@ -430,7 +430,12 @@
 	return next;
 }
 
-/* Encode <page, obj_idx> as a single handle value */
+/*
+ * Encode <page, obj_idx> as a single handle value.
+ * On hardware platforms with physical memory starting at 0x0 the pfn
+ * could be 0 so we ensure that the handle will never be 0 by adjusting the
+ * encoded obj_idx value before encoding.
+ */
 static void *obj_location_to_handle(struct page *page, unsigned long obj_idx)
 {
 	unsigned long handle;
@@ -441,17 +446,21 @@
 	}
 
 	handle = page_to_pfn(page) << OBJ_INDEX_BITS;
-	handle |= (obj_idx & OBJ_INDEX_MASK);
+	handle |= ((obj_idx + 1) & OBJ_INDEX_MASK);
 
 	return (void *)handle;
 }
 
-/* Decode <page, obj_idx> pair from the given object handle */
+/*
+ * Decode <page, obj_idx> pair from the given object handle. We adjust the
+ * decoded obj_idx back to its original value since it was adjusted in
+ * obj_location_to_handle().
+ */
 static void obj_handle_to_location(unsigned long handle, struct page **page,
 				unsigned long *obj_idx)
 {
 	*page = pfn_to_page(handle >> OBJ_INDEX_BITS);
-	*obj_idx = handle & OBJ_INDEX_MASK;
+	*obj_idx = (handle & OBJ_INDEX_MASK) - 1;
 }
 
 static unsigned long obj_idx_to_offset(struct page *page,
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 2b86f8e..71630a2 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1855,6 +1855,9 @@
  */
 static int __init amiserial_console_init(void)
 {
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
 	register_console(&sercons);
 	return 0;
 }
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7cdd1eb..0f74945 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -768,7 +768,7 @@
 	 * data at the tail to prevent a subsequent overrun */
 	while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
 		if (echo_buf(ldata, tail) == ECHO_OP_START) {
-			if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
+			if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB)
 				tail += 3;
 			else
 				tail += 2;
@@ -1998,7 +1998,10 @@
 		found = 1;
 
 	size = N_TTY_BUF_SIZE - tail;
-	n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
+	n = eol - tail;
+	if (n > 4096)
+		n += 4096;
+	n += found;
 	c = n;
 
 	if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
@@ -2243,18 +2246,19 @@
 		if (time)
 			timeout = time;
 	}
-	mutex_unlock(&ldata->atomic_read_lock);
-	remove_wait_queue(&tty->read_wait, &wait);
+	n_tty_set_room(tty);
+	up_read(&tty->termios_rwsem);
 
+	remove_wait_queue(&tty->read_wait, &wait);
 	if (!waitqueue_active(&tty->read_wait))
 		ldata->minimum_to_wake = minimum;
 
+	mutex_unlock(&ldata->atomic_read_lock);
+
 	__set_current_state(TASK_RUNNING);
 	if (b - buf)
 		retval = b - buf;
 
-	n_tty_set_room(tty);
-	up_read(&tty->termios_rwsem);
 	return retval;
 }
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f3b306e..2332991 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -41,7 +41,7 @@
 	  accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
 	  8250.nr_uarts=4. We now renamed the module back to 8250, but if
 	  anybody noticed in 3.7 and changed their userspace we still have to
-	  keep the 8350_core.* options around until they revert the changes
+	  keep the 8250_core.* options around until they revert the changes
 	  they already did.
 
 	  If 8250 is built as a module, this adds 8250_core alias instead. 
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 481b781..e9d420f 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -2052,6 +2052,9 @@
 	/* Probe ports */
 	pmz_probe();
 
+	if (pmz_ports_count == 0)
+		return -ENODEV;
+
 	/* TODO: Autoprobe console based on OF */
 	/* pmz_console.index = i; */
 	register_console(&pmz_console);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 3a1a01a..c74a00a 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2086,6 +2086,7 @@
 			filp->f_op = &tty_fops;
 		goto retry_open;
 	}
+	clear_bit(TTY_HUPPED, &tty->flags);
 	tty_unlock(tty);
 
 
diff --git a/fs/affs/Changes b/fs/affs/Changes
index a29409c..b41c2c9 100644
--- a/fs/affs/Changes
+++ b/fs/affs/Changes
@@ -91,7 +91,7 @@
 Version 3.11
 ------------
 
-- Converted to use 2.3.x page cache [Dave Jones <dave@powertweak.com>]
+- Converted to use 2.3.x page cache [Dave Jones]
 - Corruption in truncate() bugfix [Ken Tyler <kent@werple.net.au>]
 
 Version 3.10
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 6df8bd4..1e561c0 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -216,7 +216,7 @@
 	}
 	SetPageUptodate(page);
 
-	if (err == 0)
+	if (err >= 0)
 		ceph_readpage_to_fscache(inode, page);
 
 out:
diff --git a/fs/ceph/cache.c b/fs/ceph/cache.c
index 7db2e6c..8c44fdd 100644
--- a/fs/ceph/cache.c
+++ b/fs/ceph/cache.c
@@ -324,6 +324,9 @@
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
+	if (!PageFsCache(page))
+		return;
+
 	fscache_wait_on_page_write(ci->fscache, page);
 	fscache_uncache_page(ci->fscache, page);
 }
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 13976c3..3c0a4bd 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -897,7 +897,7 @@
  * caller should hold i_ceph_lock.
  * caller will not hold session s_mutex if called from destroy_inode.
  */
-void __ceph_remove_cap(struct ceph_cap *cap)
+void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
 {
 	struct ceph_mds_session *session = cap->session;
 	struct ceph_inode_info *ci = cap->ci;
@@ -909,6 +909,16 @@
 
 	/* remove from session list */
 	spin_lock(&session->s_cap_lock);
+	/*
+	 * s_cap_reconnect is protected by s_cap_lock. no one changes
+	 * s_cap_gen while session is in the reconnect state.
+	 */
+	if (queue_release &&
+	    (!session->s_cap_reconnect ||
+	     cap->cap_gen == session->s_cap_gen))
+		__queue_cap_release(session, ci->i_vino.ino, cap->cap_id,
+				    cap->mseq, cap->issue_seq);
+
 	if (session->s_cap_iterator == cap) {
 		/* not yet, we are iterating over this very cap */
 		dout("__ceph_remove_cap  delaying %p removal from session %p\n",
@@ -1023,7 +1033,6 @@
 	struct ceph_mds_cap_release *head;
 	struct ceph_mds_cap_item *item;
 
-	spin_lock(&session->s_cap_lock);
 	BUG_ON(!session->s_num_cap_releases);
 	msg = list_first_entry(&session->s_cap_releases,
 			       struct ceph_msg, list_head);
@@ -1052,7 +1061,6 @@
 		     (int)CEPH_CAPS_PER_RELEASE,
 		     (int)msg->front.iov_len);
 	}
-	spin_unlock(&session->s_cap_lock);
 }
 
 /*
@@ -1067,12 +1075,8 @@
 	p = rb_first(&ci->i_caps);
 	while (p) {
 		struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
-		struct ceph_mds_session *session = cap->session;
-
-		__queue_cap_release(session, ceph_ino(inode), cap->cap_id,
-				    cap->mseq, cap->issue_seq);
 		p = rb_next(p);
-		__ceph_remove_cap(cap);
+		__ceph_remove_cap(cap, true);
 	}
 }
 
@@ -2791,7 +2795,7 @@
 			}
 			spin_unlock(&mdsc->cap_dirty_lock);
 		}
-		__ceph_remove_cap(cap);
+		__ceph_remove_cap(cap, false);
 	}
 	/* else, we already released it */
 
@@ -2931,9 +2935,12 @@
 	if (!inode) {
 		dout(" i don't have ino %llx\n", vino.ino);
 
-		if (op == CEPH_CAP_OP_IMPORT)
+		if (op == CEPH_CAP_OP_IMPORT) {
+			spin_lock(&session->s_cap_lock);
 			__queue_cap_release(session, vino.ino, cap_id,
 					    mseq, seq);
+			spin_unlock(&session->s_cap_lock);
+		}
 		goto flush_cap_releases;
 	}
 
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 868b61d..2a0bcae 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -352,8 +352,18 @@
 		}
 
 		/* note next offset and last dentry name */
+		rinfo = &req->r_reply_info;
+		if (le32_to_cpu(rinfo->dir_dir->frag) != frag) {
+			frag = le32_to_cpu(rinfo->dir_dir->frag);
+			if (ceph_frag_is_leftmost(frag))
+				fi->next_offset = 2;
+			else
+				fi->next_offset = 0;
+			off = fi->next_offset;
+		}
 		fi->offset = fi->next_offset;
 		fi->last_readdir = req;
+		fi->frag = frag;
 
 		if (req->r_reply_info.dir_end) {
 			kfree(fi->last_name);
@@ -363,7 +373,6 @@
 			else
 				fi->next_offset = 0;
 		} else {
-			rinfo = &req->r_reply_info;
 			err = note_last_dentry(fi,
 				       rinfo->dir_dname[rinfo->dir_nr-1],
 				       rinfo->dir_dname_len[rinfo->dir_nr-1]);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 8549a48..9a8e396 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -577,6 +577,8 @@
 	int issued = 0, implemented;
 	struct timespec mtime, atime, ctime;
 	u32 nsplits;
+	struct ceph_inode_frag *frag;
+	struct rb_node *rb_node;
 	struct ceph_buffer *xattr_blob = NULL;
 	int err = 0;
 	int queue_trunc = 0;
@@ -751,15 +753,38 @@
 	/* FIXME: move me up, if/when version reflects fragtree changes */
 	nsplits = le32_to_cpu(info->fragtree.nsplits);
 	mutex_lock(&ci->i_fragtree_mutex);
+	rb_node = rb_first(&ci->i_fragtree);
 	for (i = 0; i < nsplits; i++) {
 		u32 id = le32_to_cpu(info->fragtree.splits[i].frag);
-		struct ceph_inode_frag *frag = __get_or_create_frag(ci, id);
-
-		if (IS_ERR(frag))
-			continue;
+		frag = NULL;
+		while (rb_node) {
+			frag = rb_entry(rb_node, struct ceph_inode_frag, node);
+			if (ceph_frag_compare(frag->frag, id) >= 0) {
+				if (frag->frag != id)
+					frag = NULL;
+				else
+					rb_node = rb_next(rb_node);
+				break;
+			}
+			rb_node = rb_next(rb_node);
+			rb_erase(&frag->node, &ci->i_fragtree);
+			kfree(frag);
+			frag = NULL;
+		}
+		if (!frag) {
+			frag = __get_or_create_frag(ci, id);
+			if (IS_ERR(frag))
+				continue;
+		}
 		frag->split_by = le32_to_cpu(info->fragtree.splits[i].by);
 		dout(" frag %x split by %d\n", frag->frag, frag->split_by);
 	}
+	while (rb_node) {
+		frag = rb_entry(rb_node, struct ceph_inode_frag, node);
+		rb_node = rb_next(rb_node);
+		rb_erase(&frag->node, &ci->i_fragtree);
+		kfree(frag);
+	}
 	mutex_unlock(&ci->i_fragtree_mutex);
 
 	/* were we issued a capability? */
@@ -1250,8 +1275,20 @@
 	int err = 0, i;
 	struct inode *snapdir = NULL;
 	struct ceph_mds_request_head *rhead = req->r_request->front.iov_base;
-	u64 frag = le32_to_cpu(rhead->args.readdir.frag);
 	struct ceph_dentry_info *di;
+	u64 r_readdir_offset = req->r_readdir_offset;
+	u32 frag = le32_to_cpu(rhead->args.readdir.frag);
+
+	if (rinfo->dir_dir &&
+	    le32_to_cpu(rinfo->dir_dir->frag) != frag) {
+		dout("readdir_prepopulate got new frag %x -> %x\n",
+		     frag, le32_to_cpu(rinfo->dir_dir->frag));
+		frag = le32_to_cpu(rinfo->dir_dir->frag);
+		if (ceph_frag_is_leftmost(frag))
+			r_readdir_offset = 2;
+		else
+			r_readdir_offset = 0;
+	}
 
 	if (req->r_aborted)
 		return readdir_prepopulate_inodes_only(req, session);
@@ -1315,7 +1352,7 @@
 		}
 
 		di = dn->d_fsdata;
-		di->offset = ceph_make_fpos(frag, i + req->r_readdir_offset);
+		di->offset = ceph_make_fpos(frag, i + r_readdir_offset);
 
 		/* inode */
 		if (dn->d_inode) {
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index b7bda5d..d90861f 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -43,6 +43,7 @@
  */
 
 struct ceph_reconnect_state {
+	int nr_caps;
 	struct ceph_pagelist *pagelist;
 	bool flock;
 };
@@ -443,6 +444,7 @@
 	INIT_LIST_HEAD(&s->s_waiting);
 	INIT_LIST_HEAD(&s->s_unsafe);
 	s->s_num_cap_releases = 0;
+	s->s_cap_reconnect = 0;
 	s->s_cap_iterator = NULL;
 	INIT_LIST_HEAD(&s->s_cap_releases);
 	INIT_LIST_HEAD(&s->s_cap_releases_done);
@@ -642,6 +644,8 @@
 		req->r_unsafe_dir = NULL;
 	}
 
+	complete_all(&req->r_safe_completion);
+
 	ceph_mdsc_put_request(req);
 }
 
@@ -986,7 +990,7 @@
 	dout("removing cap %p, ci is %p, inode is %p\n",
 	     cap, ci, &ci->vfs_inode);
 	spin_lock(&ci->i_ceph_lock);
-	__ceph_remove_cap(cap);
+	__ceph_remove_cap(cap, false);
 	if (!__ceph_is_any_real_caps(ci)) {
 		struct ceph_mds_client *mdsc =
 			ceph_sb_to_client(inode->i_sb)->mdsc;
@@ -1231,9 +1235,7 @@
 	session->s_trim_caps--;
 	if (oissued) {
 		/* we aren't the only cap.. just remove us */
-		__queue_cap_release(session, ceph_ino(inode), cap->cap_id,
-				    cap->mseq, cap->issue_seq);
-		__ceph_remove_cap(cap);
+		__ceph_remove_cap(cap, true);
 	} else {
 		/* try to drop referring dentries */
 		spin_unlock(&ci->i_ceph_lock);
@@ -1416,7 +1418,6 @@
 	unsigned num;
 
 	dout("discard_cap_releases mds%d\n", session->s_mds);
-	spin_lock(&session->s_cap_lock);
 
 	/* zero out the in-progress message */
 	msg = list_first_entry(&session->s_cap_releases,
@@ -1443,8 +1444,6 @@
 		msg->front.iov_len = sizeof(*head);
 		list_add(&msg->list_head, &session->s_cap_releases);
 	}
-
-	spin_unlock(&session->s_cap_lock);
 }
 
 /*
@@ -1875,8 +1874,11 @@
 	int mds = -1;
 	int err = -EAGAIN;
 
-	if (req->r_err || req->r_got_result)
+	if (req->r_err || req->r_got_result) {
+		if (req->r_aborted)
+			__unregister_request(mdsc, req);
 		goto out;
+	}
 
 	if (req->r_timeout &&
 	    time_after_eq(jiffies, req->r_started + req->r_timeout)) {
@@ -2186,7 +2188,6 @@
 	if (head->safe) {
 		req->r_got_safe = true;
 		__unregister_request(mdsc, req);
-		complete_all(&req->r_safe_completion);
 
 		if (req->r_got_unsafe) {
 			/*
@@ -2238,8 +2239,7 @@
 	err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
 	if (err == 0) {
 		if (result == 0 && (req->r_op == CEPH_MDS_OP_READDIR ||
-				    req->r_op == CEPH_MDS_OP_LSSNAP) &&
-		    rinfo->dir_nr)
+				    req->r_op == CEPH_MDS_OP_LSSNAP))
 			ceph_readdir_prepopulate(req, req->r_session);
 		ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
 	}
@@ -2490,6 +2490,7 @@
 	cap->seq = 0;        /* reset cap seq */
 	cap->issue_seq = 0;  /* and issue_seq */
 	cap->mseq = 0;       /* and migrate_seq */
+	cap->cap_gen = cap->session->s_cap_gen;
 
 	if (recon_state->flock) {
 		rec.v2.cap_id = cpu_to_le64(cap->cap_id);
@@ -2552,6 +2553,8 @@
 	} else {
 		err = ceph_pagelist_append(pagelist, &rec, reclen);
 	}
+
+	recon_state->nr_caps++;
 out_free:
 	kfree(path);
 out_dput:
@@ -2579,6 +2582,7 @@
 	struct rb_node *p;
 	int mds = session->s_mds;
 	int err = -ENOMEM;
+	int s_nr_caps;
 	struct ceph_pagelist *pagelist;
 	struct ceph_reconnect_state recon_state;
 
@@ -2610,20 +2614,38 @@
 	dout("session %p state %s\n", session,
 	     session_state_name(session->s_state));
 
+	spin_lock(&session->s_gen_ttl_lock);
+	session->s_cap_gen++;
+	spin_unlock(&session->s_gen_ttl_lock);
+
+	spin_lock(&session->s_cap_lock);
+	/*
+	 * notify __ceph_remove_cap() that we are composing cap reconnect.
+	 * If a cap get released before being added to the cap reconnect,
+	 * __ceph_remove_cap() should skip queuing cap release.
+	 */
+	session->s_cap_reconnect = 1;
 	/* drop old cap expires; we're about to reestablish that state */
 	discard_cap_releases(mdsc, session);
+	spin_unlock(&session->s_cap_lock);
 
 	/* traverse this session's caps */
-	err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps);
+	s_nr_caps = session->s_nr_caps;
+	err = ceph_pagelist_encode_32(pagelist, s_nr_caps);
 	if (err)
 		goto fail;
 
+	recon_state.nr_caps = 0;
 	recon_state.pagelist = pagelist;
 	recon_state.flock = session->s_con.peer_features & CEPH_FEATURE_FLOCK;
 	err = iterate_session_caps(session, encode_caps_cb, &recon_state);
 	if (err < 0)
 		goto fail;
 
+	spin_lock(&session->s_cap_lock);
+	session->s_cap_reconnect = 0;
+	spin_unlock(&session->s_cap_lock);
+
 	/*
 	 * snaprealms.  we provide mds with the ino, seq (version), and
 	 * parent for all of our realms.  If the mds has any newer info,
@@ -2646,11 +2668,18 @@
 
 	if (recon_state.flock)
 		reply->hdr.version = cpu_to_le16(2);
-	if (pagelist->length) {
-		/* set up outbound data if we have any */
-		reply->hdr.data_len = cpu_to_le32(pagelist->length);
-		ceph_msg_data_add_pagelist(reply, pagelist);
+
+	/* raced with cap release? */
+	if (s_nr_caps != recon_state.nr_caps) {
+		struct page *page = list_first_entry(&pagelist->head,
+						     struct page, lru);
+		__le32 *addr = kmap_atomic(page);
+		*addr = cpu_to_le32(recon_state.nr_caps);
+		kunmap_atomic(addr);
 	}
+
+	reply->hdr.data_len = cpu_to_le32(pagelist->length);
+	ceph_msg_data_add_pagelist(reply, pagelist);
 	ceph_con_send(&session->s_con, reply);
 
 	mutex_unlock(&session->s_mutex);
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index c2a19fb..4c053d0 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -132,6 +132,7 @@
 	struct list_head  s_caps;     /* all caps issued by this session */
 	int               s_nr_caps, s_trim_caps;
 	int               s_num_cap_releases;
+	int		  s_cap_reconnect;
 	struct list_head  s_cap_releases; /* waiting cap_release messages */
 	struct list_head  s_cap_releases_done; /* ready to send */
 	struct ceph_cap  *s_cap_iterator;
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 6014b0a..ef4ac38 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -741,13 +741,7 @@
 			int fmode, unsigned issued, unsigned wanted,
 			unsigned cap, unsigned seq, u64 realmino, int flags,
 			struct ceph_cap_reservation *caps_reservation);
-extern void __ceph_remove_cap(struct ceph_cap *cap);
-static inline void ceph_remove_cap(struct ceph_cap *cap)
-{
-	spin_lock(&cap->ci->i_ceph_lock);
-	__ceph_remove_cap(cap);
-	spin_unlock(&cap->ci->i_ceph_lock);
-}
+extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
 extern void ceph_put_cap(struct ceph_mds_client *mdsc,
 			 struct ceph_cap *cap);
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index d9ea7ad..f918a99 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -384,6 +384,7 @@
 	int (*clone_range)(const unsigned int, struct cifsFileInfo *src_file,
 			struct cifsFileInfo *target_file, u64 src_off, u64 len,
 			u64 dest_off);
+	int (*validate_negotiate)(const unsigned int, struct cifs_tcon *);
 };
 
 struct smb_version_values {
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 409b45e..7749230 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -26,13 +26,15 @@
 #include <linux/mount.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
-#include <linux/btrfs.h>
 #include "cifspdu.h"
 #include "cifsglob.h"
 #include "cifsproto.h"
 #include "cifs_debug.h"
 #include "cifsfs.h"
 
+#define CIFS_IOCTL_MAGIC	0xCF
+#define CIFS_IOC_COPYCHUNK_FILE	_IOW(CIFS_IOCTL_MAGIC, 3, int)
+
 static long cifs_ioctl_clone(unsigned int xid, struct file *dst_file,
 			unsigned long srcfd, u64 off, u64 len, u64 destoff)
 {
@@ -213,7 +215,7 @@
 				cifs_dbg(FYI, "set compress flag rc %d\n", rc);
 			}
 			break;
-		case BTRFS_IOC_CLONE:
+		case CIFS_IOC_COPYCHUNK_FILE:
 			rc = cifs_ioctl_clone(xid, filep, arg, 0, 0, 0);
 			break;
 		default:
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 11dde4b..757da3e 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -532,7 +532,10 @@
 	int rc;
 	unsigned int ret_data_len;
 	struct copychunk_ioctl *pcchunk;
-	char *retbuf = NULL;
+	struct copychunk_ioctl_rsp *retbuf = NULL;
+	struct cifs_tcon *tcon;
+	int chunks_copied = 0;
+	bool chunk_sizes_updated = false;
 
 	pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
 
@@ -547,27 +550,96 @@
 
 	/* Note: request_res_key sets res_key null only if rc !=0 */
 	if (rc)
-		return rc;
+		goto cchunk_out;
 
 	/* For now array only one chunk long, will make more flexible later */
 	pcchunk->ChunkCount = __constant_cpu_to_le32(1);
 	pcchunk->Reserved = 0;
-	pcchunk->SourceOffset = cpu_to_le64(src_off);
-	pcchunk->TargetOffset = cpu_to_le64(dest_off);
-	pcchunk->Length = cpu_to_le32(len);
 	pcchunk->Reserved2 = 0;
 
-	/* Request that server copy to target from src file identified by key */
-	rc = SMB2_ioctl(xid, tlink_tcon(trgtfile->tlink),
-			trgtfile->fid.persistent_fid,
+	tcon = tlink_tcon(trgtfile->tlink);
+
+	while (len > 0) {
+		pcchunk->SourceOffset = cpu_to_le64(src_off);
+		pcchunk->TargetOffset = cpu_to_le64(dest_off);
+		pcchunk->Length =
+			cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
+
+		/* Request server copy to target from src identified by key */
+		rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
 			trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
 			true /* is_fsctl */, (char *)pcchunk,
-			sizeof(struct copychunk_ioctl),	&retbuf, &ret_data_len);
+			sizeof(struct copychunk_ioctl),	(char **)&retbuf,
+			&ret_data_len);
+		if (rc == 0) {
+			if (ret_data_len !=
+					sizeof(struct copychunk_ioctl_rsp)) {
+				cifs_dbg(VFS, "invalid cchunk response size\n");
+				rc = -EIO;
+				goto cchunk_out;
+			}
+			if (retbuf->TotalBytesWritten == 0) {
+				cifs_dbg(FYI, "no bytes copied\n");
+				rc = -EIO;
+				goto cchunk_out;
+			}
+			/*
+			 * Check if server claimed to write more than we asked
+			 */
+			if (le32_to_cpu(retbuf->TotalBytesWritten) >
+			    le32_to_cpu(pcchunk->Length)) {
+				cifs_dbg(VFS, "invalid copy chunk response\n");
+				rc = -EIO;
+				goto cchunk_out;
+			}
+			if (le32_to_cpu(retbuf->ChunksWritten) != 1) {
+				cifs_dbg(VFS, "invalid num chunks written\n");
+				rc = -EIO;
+				goto cchunk_out;
+			}
+			chunks_copied++;
 
-	/* BB need to special case rc = EINVAL to alter chunk size */
+			src_off += le32_to_cpu(retbuf->TotalBytesWritten);
+			dest_off += le32_to_cpu(retbuf->TotalBytesWritten);
+			len -= le32_to_cpu(retbuf->TotalBytesWritten);
 
-	cifs_dbg(FYI, "rc %d data length out %d\n", rc, ret_data_len);
+			cifs_dbg(FYI, "Chunks %d PartialChunk %d Total %d\n",
+				le32_to_cpu(retbuf->ChunksWritten),
+				le32_to_cpu(retbuf->ChunkBytesWritten),
+				le32_to_cpu(retbuf->TotalBytesWritten));
+		} else if (rc == -EINVAL) {
+			if (ret_data_len != sizeof(struct copychunk_ioctl_rsp))
+				goto cchunk_out;
 
+			cifs_dbg(FYI, "MaxChunks %d BytesChunk %d MaxCopy %d\n",
+				le32_to_cpu(retbuf->ChunksWritten),
+				le32_to_cpu(retbuf->ChunkBytesWritten),
+				le32_to_cpu(retbuf->TotalBytesWritten));
+
+			/*
+			 * Check if this is the first request using these sizes,
+			 * (ie check if copy succeed once with original sizes
+			 * and check if the server gave us different sizes after
+			 * we already updated max sizes on previous request).
+			 * if not then why is the server returning an error now
+			 */
+			if ((chunks_copied != 0) || chunk_sizes_updated)
+				goto cchunk_out;
+
+			/* Check that server is not asking us to grow size */
+			if (le32_to_cpu(retbuf->ChunkBytesWritten) <
+					tcon->max_bytes_chunk)
+				tcon->max_bytes_chunk =
+					le32_to_cpu(retbuf->ChunkBytesWritten);
+			else
+				goto cchunk_out; /* server gave us bogus size */
+
+			/* No need to change MaxChunks since already set to 1 */
+			chunk_sizes_updated = true;
+		}
+	}
+
+cchunk_out:
 	kfree(pcchunk);
 	return rc;
 }
@@ -1247,6 +1319,7 @@
 	.create_lease_buf = smb3_create_lease_buf,
 	.parse_lease_buf = smb3_parse_lease_buf,
 	.clone_range = smb2_clone_range,
+	.validate_negotiate = smb3_validate_negotiate,
 };
 
 struct smb_version_values smb20_values = {
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index d65270c..2013234 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -454,6 +454,81 @@
 	return rc;
 }
 
+int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)
+{
+	int rc = 0;
+	struct validate_negotiate_info_req vneg_inbuf;
+	struct validate_negotiate_info_rsp *pneg_rsp;
+	u32 rsplen;
+
+	cifs_dbg(FYI, "validate negotiate\n");
+
+	/*
+	 * validation ioctl must be signed, so no point sending this if we
+	 * can not sign it.  We could eventually change this to selectively
+	 * sign just this, the first and only signed request on a connection.
+	 * This is good enough for now since a user who wants better security
+	 * would also enable signing on the mount. Having validation of
+	 * negotiate info for signed connections helps reduce attack vectors
+	 */
+	if (tcon->ses->server->sign == false)
+		return 0; /* validation requires signing */
+
+	vneg_inbuf.Capabilities =
+			cpu_to_le32(tcon->ses->server->vals->req_capabilities);
+	memcpy(vneg_inbuf.Guid, cifs_client_guid, SMB2_CLIENT_GUID_SIZE);
+
+	if (tcon->ses->sign)
+		vneg_inbuf.SecurityMode =
+			cpu_to_le16(SMB2_NEGOTIATE_SIGNING_REQUIRED);
+	else if (global_secflags & CIFSSEC_MAY_SIGN)
+		vneg_inbuf.SecurityMode =
+			cpu_to_le16(SMB2_NEGOTIATE_SIGNING_ENABLED);
+	else
+		vneg_inbuf.SecurityMode = 0;
+
+	vneg_inbuf.DialectCount = cpu_to_le16(1);
+	vneg_inbuf.Dialects[0] =
+		cpu_to_le16(tcon->ses->server->vals->protocol_id);
+
+	rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID,
+		FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */,
+		(char *)&vneg_inbuf, sizeof(struct validate_negotiate_info_req),
+		(char **)&pneg_rsp, &rsplen);
+
+	if (rc != 0) {
+		cifs_dbg(VFS, "validate protocol negotiate failed: %d\n", rc);
+		return -EIO;
+	}
+
+	if (rsplen != sizeof(struct validate_negotiate_info_rsp)) {
+		cifs_dbg(VFS, "invalid size of protocol negotiate response\n");
+		return -EIO;
+	}
+
+	/* check validate negotiate info response matches what we got earlier */
+	if (pneg_rsp->Dialect !=
+			cpu_to_le16(tcon->ses->server->vals->protocol_id))
+		goto vneg_out;
+
+	if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode))
+		goto vneg_out;
+
+	/* do not validate server guid because not saved at negprot time yet */
+
+	if ((le32_to_cpu(pneg_rsp->Capabilities) | SMB2_NT_FIND |
+	      SMB2_LARGE_FILES) != tcon->ses->server->capabilities)
+		goto vneg_out;
+
+	/* validate negotiate successful */
+	cifs_dbg(FYI, "validate negotiate info successful\n");
+	return 0;
+
+vneg_out:
+	cifs_dbg(VFS, "protocol revalidation - security settings mismatch\n");
+	return -EIO;
+}
+
 int
 SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses,
 		const struct nls_table *nls_cp)
@@ -829,6 +904,8 @@
 	    ((tcon->share_flags & SHI1005_FLAGS_DFS) == 0))
 		cifs_dbg(VFS, "DFS capability contradicts DFS flag\n");
 	init_copy_chunk_defaults(tcon);
+	if (tcon->ses->server->ops->validate_negotiate)
+		rc = tcon->ses->server->ops->validate_negotiate(xid, tcon);
 tcon_exit:
 	free_rsp_buf(resp_buftype, rsp);
 	kfree(unc_path);
@@ -1214,10 +1291,17 @@
 	rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0);
 	rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base;
 
-	if (rc != 0) {
+	if ((rc != 0) && (rc != -EINVAL)) {
 		if (tcon)
 			cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE);
 		goto ioctl_exit;
+	} else if (rc == -EINVAL) {
+		if ((opcode != FSCTL_SRV_COPYCHUNK_WRITE) &&
+		    (opcode != FSCTL_SRV_COPYCHUNK)) {
+			if (tcon)
+				cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE);
+			goto ioctl_exit;
+		}
 	}
 
 	/* check if caller wants to look at return data or just return rc */
@@ -2154,11 +2238,9 @@
 	rc = SendReceive2(xid, ses, iov, num, &resp_buftype, 0);
 	rsp = (struct smb2_set_info_rsp *)iov[0].iov_base;
 
-	if (rc != 0) {
+	if (rc != 0)
 		cifs_stats_fail_inc(tcon, SMB2_SET_INFO_HE);
-		goto out;
-	}
-out:
+
 	free_rsp_buf(resp_buftype, rsp);
 	kfree(iov);
 	return rc;
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index f88320b..2022c54 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -577,13 +577,19 @@
 	__le32 TotalBytesWritten;
 } __packed;
 
-/* Response and Request are the same format */
-struct validate_negotiate_info {
+struct validate_negotiate_info_req {
 	__le32 Capabilities;
 	__u8   Guid[SMB2_CLIENT_GUID_SIZE];
 	__le16 SecurityMode;
 	__le16 DialectCount;
-	__le16 Dialect[1];
+	__le16 Dialects[1]; /* dialect (someday maybe list) client asked for */
+} __packed;
+
+struct validate_negotiate_info_rsp {
+	__le32 Capabilities;
+	__u8   Guid[SMB2_CLIENT_GUID_SIZE];
+	__le16 SecurityMode;
+	__le16 Dialect; /* Dialect in use for the connection */
 } __packed;
 
 #define RSS_CAPABLE	0x00000001
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index b4eea10..93adc64 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -162,5 +162,6 @@
 		      struct smb2_lock_element *buf);
 extern int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon,
 			    __u8 *lease_key, const __le32 lease_state);
+extern int smb3_validate_negotiate(const unsigned int, struct cifs_tcon *);
 
 #endif			/* _SMB2PROTO_H */
diff --git a/fs/cifs/smbfsctl.h b/fs/cifs/smbfsctl.h
index a4b2391f..0e538b5 100644
--- a/fs/cifs/smbfsctl.h
+++ b/fs/cifs/smbfsctl.h
@@ -90,7 +90,7 @@
 #define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4 /* BB add struct */
 #define FSCTL_LMR_GET_LINK_TRACK_INF 0x001400E8 /* BB add struct */
 #define FSCTL_LMR_SET_LINK_TRACK_INF 0x001400EC /* BB add struct */
-#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* BB add struct */
+#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204
 /* Perform server-side data movement */
 #define FSCTL_SRV_COPYCHUNK 0x001440F2
 #define FSCTL_SRV_COPYCHUNK_WRITE 0x001480F2
diff --git a/fs/namei.c b/fs/namei.c
index 8f77a8c..c53d3a9 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -513,8 +513,7 @@
 
 	if (!lockref_get_not_dead(&parent->d_lockref)) {
 		nd->path.dentry = NULL;	
-		rcu_read_unlock();
-		return -ECHILD;
+		goto out;
 	}
 
 	/*
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 79b5da2..b94f936 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -609,7 +609,7 @@
 	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
 	struct sysfs_open_file *of;
-	bool has_read, has_write;
+	bool has_read, has_write, has_mmap;
 	int error = -EACCES;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
@@ -621,6 +621,7 @@
 
 		has_read = battr->read || battr->mmap;
 		has_write = battr->write || battr->mmap;
+		has_mmap = battr->mmap;
 	} else {
 		const struct sysfs_ops *ops = sysfs_file_ops(attr_sd);
 
@@ -632,6 +633,7 @@
 
 		has_read = ops->show;
 		has_write = ops->store;
+		has_mmap = false;
 	}
 
 	/* check perms and supported operations */
@@ -649,7 +651,23 @@
 	if (!of)
 		goto err_out;
 
-	mutex_init(&of->mutex);
+	/*
+	 * The following is done to give a different lockdep key to
+	 * @of->mutex for files which implement mmap.  This is a rather
+	 * crude way to avoid false positive lockdep warning around
+	 * mm->mmap_sem - mmap nests @of->mutex under mm->mmap_sem and
+	 * reading /sys/block/sda/trace/act_mask grabs sr_mutex, under
+	 * which mm->mmap_sem nests, while holding @of->mutex.  As each
+	 * open file has a separate mutex, it's okay as long as those don't
+	 * happen on the same file.  At this point, we can't easily give
+	 * each file a separate locking class.  Let's differentiate on
+	 * whether the file has mmap or not for now.
+	 */
+	if (has_mmap)
+		mutex_init(&of->mutex);
+	else
+		mutex_init(&of->mutex);
+
 	of->sd = attr_sd;
 	of->file = file;
 
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index d98c670..3ea214c 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -83,7 +83,9 @@
  * Should the subsystem abort the loading of an ACPI table if the
  * table checksum is incorrect?
  */
+#ifndef ACPI_CHECKSUM_ABORT
 #define ACPI_CHECKSUM_ABORT             FALSE
+#endif
 
 /*
  * Generate a version of ACPICA that only supports "reduced hardware"
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 7b2de02..c602c77 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -100,6 +100,7 @@
 struct acpi_hotplug_profile {
 	struct kobject kobj;
 	bool enabled:1;
+	bool ignore:1;
 	enum acpi_hotplug_mode mode;
 };
 
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index d8f9457..4278aba9 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -46,7 +46,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20130927
+#define ACPI_CA_VERSION                 0x20131115
 
 #include <acpi/acconfig.h>
 #include <acpi/actypes.h>
diff --git a/include/asm-generic/simd.h b/include/asm-generic/simd.h
new file mode 100644
index 0000000..f57eb7b
--- /dev/null
+++ b/include/asm-generic/simd.h
@@ -0,0 +1,14 @@
+
+#include <linux/hardirq.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ *                instructions or access the SIMD register file
+ *
+ * As architectures typically don't preserve the SIMD register file when
+ * taking an interrupt, !in_interrupt() should be a reasonable default.
+ */
+static __must_check inline bool may_use_simd(void)
+{
+	return !in_interrupt();
+}
diff --git a/arch/x86/include/asm/crypto/ablk_helper.h b/include/crypto/ablk_helper.h
similarity index 100%
rename from arch/x86/include/asm/crypto/ablk_helper.h
rename to include/crypto/ablk_helper.h
diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h
index 418d270..e73c19e 100644
--- a/include/crypto/algapi.h
+++ b/include/crypto/algapi.h
@@ -386,5 +386,21 @@
 	return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC;
 }
 
-#endif	/* _CRYPTO_ALGAPI_H */
+noinline unsigned long __crypto_memneq(const void *a, const void *b, size_t size);
 
+/**
+ * crypto_memneq - Compare two areas of memory without leaking
+ *		   timing information.
+ *
+ * @a: One area of memory
+ * @b: Another area of memory
+ * @size: The size of the area.
+ *
+ * Returns 0 when data is equal, 1 otherwise.
+ */
+static inline int crypto_memneq(const void *a, const void *b, size_t size)
+{
+	return __crypto_memneq(a, b, size) != 0UL ? 1 : 0;
+}
+
+#endif	/* _CRYPTO_ALGAPI_H */
diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h
index e47b044..6775059 100644
--- a/include/crypto/authenc.h
+++ b/include/crypto/authenc.h
@@ -23,5 +23,15 @@
 	__be32 enckeylen;
 };
 
-#endif	/* _CRYPTO_AUTHENC_H */
+struct crypto_authenc_keys {
+	const u8 *authkey;
+	const u8 *enckey;
 
+	unsigned int authkeylen;
+	unsigned int enckeylen;
+};
+
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+			       unsigned int keylen);
+
+#endif	/* _CRYPTO_AUTHENC_H */
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 656a27e..82eac61 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -125,6 +125,13 @@
 int gpiod_lock_as_irq(struct gpio_desc *desc);
 void gpiod_unlock_as_irq(struct gpio_desc *desc);
 
+enum gpio_lookup_flags {
+	GPIO_ACTIVE_HIGH = (0 << 0),
+	GPIO_ACTIVE_LOW = (1 << 0),
+	GPIO_OPEN_DRAIN = (1 << 1),
+	GPIO_OPEN_SOURCE = (1 << 2),
+};
+
 /**
  * Lookup table for associating GPIOs to specific devices and functions using
  * platform data.
@@ -152,9 +159,9 @@
 	 */
 	unsigned int idx;
 	/*
-	 * mask of GPIOF_* values
+	 * mask of GPIO_* values
 	 */
-	unsigned long flags;
+	enum gpio_lookup_flags flags;
 };
 
 /*
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index a265af2..206a2af 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -21,6 +21,8 @@
 
 #include <linux/hid.h>
 #include <linux/hid-sensor-ids.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 /**
  * struct hid_sensor_hub_attribute_info - Attribute info
@@ -184,6 +186,7 @@
 	struct platform_device *pdev;
 	unsigned usage_id;
 	bool data_ready;
+	struct iio_trigger *trigger;
 	struct hid_sensor_hub_attribute_info poll;
 	struct hid_sensor_hub_attribute_info report_state;
 	struct hid_sensor_hub_attribute_info power_state;
diff --git a/include/linux/padata.h b/include/linux/padata.h
index 86292be..4386946 100644
--- a/include/linux/padata.h
+++ b/include/linux/padata.h
@@ -129,10 +129,9 @@
 	struct padata_serial_queue	__percpu *squeue;
 	atomic_t			reorder_objects;
 	atomic_t			refcnt;
+	atomic_t			seq_nr;
 	struct padata_cpumask		cpumask;
 	spinlock_t                      lock ____cacheline_aligned;
-	spinlock_t                      seq_lock;
-	unsigned int			seq_nr;
 	unsigned int			processed;
 	struct timer_list		timer;
 };
diff --git a/include/linux/slab.h b/include/linux/slab.h
index c2bba24..1e2f4fe 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -388,10 +388,55 @@
 /**
  * kmalloc - allocate memory
  * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kcalloc).
+ * @flags: the type of memory to allocate.
  *
  * kmalloc is the normal method of allocating memory
  * for objects smaller than page size in the kernel.
+ *
+ * The @flags argument may be one of:
+ *
+ * %GFP_USER - Allocate memory on behalf of user.  May sleep.
+ *
+ * %GFP_KERNEL - Allocate normal kernel ram.  May sleep.
+ *
+ * %GFP_ATOMIC - Allocation will not sleep.  May use emergency pools.
+ *   For example, use this inside interrupt handlers.
+ *
+ * %GFP_HIGHUSER - Allocate pages from high memory.
+ *
+ * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
+ *
+ * %GFP_NOFS - Do not make any fs calls while trying to get memory.
+ *
+ * %GFP_NOWAIT - Allocation will not sleep.
+ *
+ * %GFP_THISNODE - Allocate node-local memory only.
+ *
+ * %GFP_DMA - Allocation suitable for DMA.
+ *   Should only be used for kmalloc() caches. Otherwise, use a
+ *   slab created with SLAB_DMA.
+ *
+ * Also it is possible to set different flags by OR'ing
+ * in one or more of the following additional @flags:
+ *
+ * %__GFP_COLD - Request cache-cold pages instead of
+ *   trying to return cache-warm pages.
+ *
+ * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
+ *
+ * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
+ *   (think twice before using).
+ *
+ * %__GFP_NORETRY - If memory is not immediately available,
+ *   then give up at once.
+ *
+ * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
+ *
+ * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
+ *
+ * There are other flags available as well, but these are not intended
+ * for general use, and so are not documented here. For a full list of
+ * potential flags, always refer to linux/gfp.h.
  */
 static __always_inline void *kmalloc(size_t size, gfp_t flags)
 {
@@ -502,61 +547,6 @@
 void print_slabinfo_header(struct seq_file *m);
 
 /**
- * kmalloc - allocate memory
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate.
- *
- * The @flags argument may be one of:
- *
- * %GFP_USER - Allocate memory on behalf of user.  May sleep.
- *
- * %GFP_KERNEL - Allocate normal kernel ram.  May sleep.
- *
- * %GFP_ATOMIC - Allocation will not sleep.  May use emergency pools.
- *   For example, use this inside interrupt handlers.
- *
- * %GFP_HIGHUSER - Allocate pages from high memory.
- *
- * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
- *
- * %GFP_NOFS - Do not make any fs calls while trying to get memory.
- *
- * %GFP_NOWAIT - Allocation will not sleep.
- *
- * %GFP_THISNODE - Allocate node-local memory only.
- *
- * %GFP_DMA - Allocation suitable for DMA.
- *   Should only be used for kmalloc() caches. Otherwise, use a
- *   slab created with SLAB_DMA.
- *
- * Also it is possible to set different flags by OR'ing
- * in one or more of the following additional @flags:
- *
- * %__GFP_COLD - Request cache-cold pages instead of
- *   trying to return cache-warm pages.
- *
- * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
- *
- * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
- *   (think twice before using).
- *
- * %__GFP_NORETRY - If memory is not immediately available,
- *   then give up at once.
- *
- * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
- *
- * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
- *
- * There are other flags available as well, but these are not intended
- * for general use, and so are not documented here. For a full list of
- * potential flags, always refer to linux/gfp.h.
- *
- * kmalloc is the normal method of allocating memory
- * in the kernel.
- */
-static __always_inline void *kmalloc(size_t size, gfp_t flags);
-
-/**
  * kmalloc_array - allocate memory for an array.
  * @n: number of elements.
  * @size: element size.
diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h
index c98cfa4..fd44983 100644
--- a/include/linux/tegra-powergate.h
+++ b/include/linux/tegra-powergate.h
@@ -45,6 +45,7 @@
 
 #define TEGRA_POWERGATE_3D0	TEGRA_POWERGATE_3D
 
+#ifdef CONFIG_ARCH_TEGRA
 int tegra_powergate_is_powered(int id);
 int tegra_powergate_power_on(int id);
 int tegra_powergate_power_off(int id);
@@ -52,5 +53,31 @@
 
 /* Must be called with clk disabled, and returns with clk enabled */
 int tegra_powergate_sequence_power_up(int id, struct clk *clk);
+#else
+static inline int tegra_powergate_is_powered(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_on(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_off(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_remove_clamping(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+{
+	return -ENOSYS;
+}
+#endif
 
 #endif /* _MACH_TEGRA_POWERGATE_H_ */
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 2037c45..56ebdfc 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -104,7 +104,8 @@
 	SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \
 	.kcontrol_news = wcontrols, .num_kcontrols = 1}
 #define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \
-{	.id = snd_soc_dapm_mux, .name = wname, .reg = wreg, \
+{	.id = snd_soc_dapm_mux, .name = wname, \
+	SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \
 	.kcontrol_news = wcontrols, .num_kcontrols = 1}
 #define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \
 {	.id = snd_soc_dapm_virt_mux, .name = wname, \
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 52594b2..d17a35c 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -372,7 +372,8 @@
 	__data_size += (len) * sizeof(type);
 
 #undef __string
-#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)
+#define __string(item, src) __dynamic_array(char, item,			\
+		    strlen((src) ? (const char *)(src) : "(null)") + 1)
 
 #undef DECLARE_EVENT_CLASS
 #define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
@@ -501,7 +502,7 @@
 
 #undef __assign_str
 #define __assign_str(dst, src)						\
-	strcpy(__get_str(dst), src);
+	strcpy(__get_str(dst), (src) ? (const char *)(src) : "(null)");
 
 #undef TP_fast_assign
 #define TP_fast_assign(args...) args
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 4c62513..8b729c2 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -90,6 +90,14 @@
 static DEFINE_MUTEX(cgroup_root_mutex);
 
 /*
+ * cgroup destruction makes heavy use of work items and there can be a lot
+ * of concurrent destructions.  Use a separate workqueue so that cgroup
+ * destruction work items don't end up filling up max_active of system_wq
+ * which may lead to deadlock.
+ */
+static struct workqueue_struct *cgroup_destroy_wq;
+
+/*
  * Generate an array of cgroup subsystem pointers. At boot time, this is
  * populated with the built in subsystems, and modular subsystems are
  * registered after that. The mutable section of this array is protected by
@@ -191,6 +199,7 @@
 static int cgroup_destroy_locked(struct cgroup *cgrp);
 static int cgroup_addrm_files(struct cgroup *cgrp, struct cftype cfts[],
 			      bool is_add);
+static int cgroup_file_release(struct inode *inode, struct file *file);
 
 /**
  * cgroup_css - obtain a cgroup's css for the specified subsystem
@@ -871,7 +880,7 @@
 	struct cgroup *cgrp = container_of(head, struct cgroup, rcu_head);
 
 	INIT_WORK(&cgrp->destroy_work, cgroup_free_fn);
-	schedule_work(&cgrp->destroy_work);
+	queue_work(cgroup_destroy_wq, &cgrp->destroy_work);
 }
 
 static void cgroup_diput(struct dentry *dentry, struct inode *inode)
@@ -2421,7 +2430,7 @@
 	.read = seq_read,
 	.write = cgroup_file_write,
 	.llseek = seq_lseek,
-	.release = single_release,
+	.release = cgroup_file_release,
 };
 
 static int cgroup_file_open(struct inode *inode, struct file *file)
@@ -2482,6 +2491,8 @@
 		ret = cft->release(inode, file);
 	if (css->ss)
 		css_put(css);
+	if (file->f_op == &cgroup_seqfile_operations)
+		single_release(inode, file);
 	return ret;
 }
 
@@ -4249,7 +4260,7 @@
 	 * css_put().  dput() requires process context which we don't have.
 	 */
 	INIT_WORK(&css->destroy_work, css_free_work_fn);
-	schedule_work(&css->destroy_work);
+	queue_work(cgroup_destroy_wq, &css->destroy_work);
 }
 
 static void css_release(struct percpu_ref *ref)
@@ -4539,7 +4550,7 @@
 		container_of(ref, struct cgroup_subsys_state, refcnt);
 
 	INIT_WORK(&css->destroy_work, css_killed_work_fn);
-	schedule_work(&css->destroy_work);
+	queue_work(cgroup_destroy_wq, &css->destroy_work);
 }
 
 /**
@@ -5063,6 +5074,22 @@
 	return err;
 }
 
+static int __init cgroup_wq_init(void)
+{
+	/*
+	 * There isn't much point in executing destruction path in
+	 * parallel.  Good chunk is serialized with cgroup_mutex anyway.
+	 * Use 1 for @max_active.
+	 *
+	 * We would prefer to do this in cgroup_init() above, but that
+	 * is called before init_workqueues(): so leave this until after.
+	 */
+	cgroup_destroy_wq = alloc_workqueue("cgroup_destroy", 0, 1);
+	BUG_ON(!cgroup_destroy_wq);
+	return 0;
+}
+core_initcall(cgroup_wq_init);
+
 /*
  * proc_cgroup_show()
  *  - Print task's cgroup paths into seq_file, one line for each hierarchy
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 6bf981e..4772034 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1033,8 +1033,10 @@
 	need_loop = task_has_mempolicy(tsk) ||
 			!nodes_intersects(*newmems, tsk->mems_allowed);
 
-	if (need_loop)
+	if (need_loop) {
+		local_irq_disable();
 		write_seqcount_begin(&tsk->mems_allowed_seq);
+	}
 
 	nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
 	mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1);
@@ -1042,8 +1044,10 @@
 	mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP2);
 	tsk->mems_allowed = *newmems;
 
-	if (need_loop)
+	if (need_loop) {
 		write_seqcount_end(&tsk->mems_allowed_seq);
+		local_irq_enable();
+	}
 
 	task_unlock(tsk);
 }
diff --git a/kernel/extable.c b/kernel/extable.c
index 832cb28..763faf0 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -61,7 +61,7 @@
 static inline int init_kernel_text(unsigned long addr)
 {
 	if (addr >= (unsigned long)_sinittext &&
-	    addr <= (unsigned long)_einittext)
+	    addr < (unsigned long)_einittext)
 		return 1;
 	return 0;
 }
@@ -69,7 +69,7 @@
 int core_kernel_text(unsigned long addr)
 {
 	if (addr >= (unsigned long)_stext &&
-	    addr <= (unsigned long)_etext)
+	    addr < (unsigned long)_etext)
 		return 1;
 
 	if (system_state == SYSTEM_BOOTING &&
diff --git a/kernel/padata.c b/kernel/padata.c
index 07af2c9..2abd25d 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -46,6 +46,7 @@
 
 static int padata_cpu_hash(struct parallel_data *pd)
 {
+	unsigned int seq_nr;
 	int cpu_index;
 
 	/*
@@ -53,10 +54,8 @@
 	 * seq_nr mod. number of cpus in use.
 	 */
 
-	spin_lock(&pd->seq_lock);
-	cpu_index =  pd->seq_nr % cpumask_weight(pd->cpumask.pcpu);
-	pd->seq_nr++;
-	spin_unlock(&pd->seq_lock);
+	seq_nr = atomic_inc_return(&pd->seq_nr);
+	cpu_index = seq_nr % cpumask_weight(pd->cpumask.pcpu);
 
 	return padata_index_to_cpu(pd, cpu_index);
 }
@@ -429,7 +428,7 @@
 	padata_init_pqueues(pd);
 	padata_init_squeues(pd);
 	setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd);
-	pd->seq_nr = 0;
+	atomic_set(&pd->seq_nr, -1);
 	atomic_set(&pd->reorder_objects, 0);
 	atomic_set(&pd->refcnt, 0);
 	pd->pinst = pinst;
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 22fa556..0e9f9ea 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -367,9 +367,6 @@
 
 static int __register_ftrace_function(struct ftrace_ops *ops)
 {
-	if (unlikely(ftrace_disabled))
-		return -ENODEV;
-
 	if (FTRACE_WARN_ON(ops == &global_ops))
 		return -EINVAL;
 
@@ -428,9 +425,6 @@
 {
 	int ret;
 
-	if (ftrace_disabled)
-		return -ENODEV;
-
 	if (WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED)))
 		return -EBUSY;
 
@@ -2088,10 +2082,15 @@
 static int ftrace_startup(struct ftrace_ops *ops, int command)
 {
 	bool hash_enable = true;
+	int ret;
 
 	if (unlikely(ftrace_disabled))
 		return -ENODEV;
 
+	ret = __register_ftrace_function(ops);
+	if (ret)
+		return ret;
+
 	ftrace_start_up++;
 	command |= FTRACE_UPDATE_CALLS;
 
@@ -2113,12 +2112,17 @@
 	return 0;
 }
 
-static void ftrace_shutdown(struct ftrace_ops *ops, int command)
+static int ftrace_shutdown(struct ftrace_ops *ops, int command)
 {
 	bool hash_disable = true;
+	int ret;
 
 	if (unlikely(ftrace_disabled))
-		return;
+		return -ENODEV;
+
+	ret = __unregister_ftrace_function(ops);
+	if (ret)
+		return ret;
 
 	ftrace_start_up--;
 	/*
@@ -2153,9 +2157,10 @@
 	}
 
 	if (!command || !ftrace_enabled)
-		return;
+		return 0;
 
 	ftrace_run_update_code(command);
+	return 0;
 }
 
 static void ftrace_startup_sysctl(void)
@@ -3060,16 +3065,13 @@
 	if (i == FTRACE_FUNC_HASHSIZE)
 		return;
 
-	ret = __register_ftrace_function(&trace_probe_ops);
-	if (!ret)
-		ret = ftrace_startup(&trace_probe_ops, 0);
+	ret = ftrace_startup(&trace_probe_ops, 0);
 
 	ftrace_probe_registered = 1;
 }
 
 static void __disable_ftrace_function_probe(void)
 {
-	int ret;
 	int i;
 
 	if (!ftrace_probe_registered)
@@ -3082,9 +3084,7 @@
 	}
 
 	/* no more funcs left */
-	ret = __unregister_ftrace_function(&trace_probe_ops);
-	if (!ret)
-		ftrace_shutdown(&trace_probe_ops, 0);
+	ftrace_shutdown(&trace_probe_ops, 0);
 
 	ftrace_probe_registered = 0;
 }
@@ -4366,12 +4366,15 @@
 static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; }
 static inline void ftrace_startup_enable(int command) { }
 /* Keep as macros so we do not need to define the commands */
-# define ftrace_startup(ops, command)			\
-	({						\
-		(ops)->flags |= FTRACE_OPS_FL_ENABLED;	\
-		0;					\
+# define ftrace_startup(ops, command)					\
+	({								\
+		int ___ret = __register_ftrace_function(ops);		\
+		if (!___ret)						\
+			(ops)->flags |= FTRACE_OPS_FL_ENABLED;		\
+		___ret;							\
 	})
-# define ftrace_shutdown(ops, command)	do { } while (0)
+# define ftrace_shutdown(ops, command) __unregister_ftrace_function(ops)
+
 # define ftrace_startup_sysctl()	do { } while (0)
 # define ftrace_shutdown_sysctl()	do { } while (0)
 
@@ -4780,9 +4783,7 @@
 
 	mutex_lock(&ftrace_lock);
 
-	ret = __register_ftrace_function(ops);
-	if (!ret)
-		ret = ftrace_startup(ops, 0);
+	ret = ftrace_startup(ops, 0);
 
 	mutex_unlock(&ftrace_lock);
 
@@ -4801,9 +4802,7 @@
 	int ret;
 
 	mutex_lock(&ftrace_lock);
-	ret = __unregister_ftrace_function(ops);
-	if (!ret)
-		ftrace_shutdown(ops, 0);
+	ret = ftrace_shutdown(ops, 0);
 	mutex_unlock(&ftrace_lock);
 
 	return ret;
@@ -4997,6 +4996,13 @@
 	return NOTIFY_DONE;
 }
 
+/* Just a place holder for function graph */
+static struct ftrace_ops fgraph_ops __read_mostly = {
+	.func		= ftrace_stub,
+	.flags		= FTRACE_OPS_FL_STUB | FTRACE_OPS_FL_GLOBAL |
+				FTRACE_OPS_FL_RECURSION_SAFE,
+};
+
 int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 			trace_func_graph_ent_t entryfunc)
 {
@@ -5023,7 +5029,7 @@
 	ftrace_graph_return = retfunc;
 	ftrace_graph_entry = entryfunc;
 
-	ret = ftrace_startup(&global_ops, FTRACE_START_FUNC_RET);
+	ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET);
 
 out:
 	mutex_unlock(&ftrace_lock);
@@ -5040,7 +5046,7 @@
 	ftrace_graph_active--;
 	ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
 	ftrace_graph_entry = ftrace_graph_entry_stub;
-	ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET);
+	ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET);
 	unregister_pm_notifier(&ftrace_suspend_notifier);
 	unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
 
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 987293d..c66912be 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -305,6 +305,9 @@
 /* I: attributes used when instantiating standard unbound pools on demand */
 static struct workqueue_attrs *unbound_std_wq_attrs[NR_STD_WORKER_POOLS];
 
+/* I: attributes used when instantiating ordered pools on demand */
+static struct workqueue_attrs *ordered_wq_attrs[NR_STD_WORKER_POOLS];
+
 struct workqueue_struct *system_wq __read_mostly;
 EXPORT_SYMBOL(system_wq);
 struct workqueue_struct *system_highpri_wq __read_mostly;
@@ -518,14 +521,21 @@
 static inline void debug_work_deactivate(struct work_struct *work) { }
 #endif
 
-/* allocate ID and assign it to @pool */
+/**
+ * worker_pool_assign_id - allocate ID and assing it to @pool
+ * @pool: the pool pointer of interest
+ *
+ * Returns 0 if ID in [0, WORK_OFFQ_POOL_NONE) is allocated and assigned
+ * successfully, -errno on failure.
+ */
 static int worker_pool_assign_id(struct worker_pool *pool)
 {
 	int ret;
 
 	lockdep_assert_held(&wq_pool_mutex);
 
-	ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
+	ret = idr_alloc(&worker_pool_idr, pool, 0, WORK_OFFQ_POOL_NONE,
+			GFP_KERNEL);
 	if (ret >= 0) {
 		pool->id = ret;
 		return 0;
@@ -1320,7 +1330,7 @@
 
 	debug_work_activate(work);
 
-	/* if dying, only works from the same workqueue are allowed */
+	/* if draining, only works from the same workqueue are allowed */
 	if (unlikely(wq->flags & __WQ_DRAINING) &&
 	    WARN_ON_ONCE(!is_chained_work(wq)))
 		return;
@@ -1736,16 +1746,17 @@
 	if (IS_ERR(worker->task))
 		goto fail;
 
+	set_user_nice(worker->task, pool->attrs->nice);
+
+	/* prevent userland from meddling with cpumask of workqueue workers */
+	worker->task->flags |= PF_NO_SETAFFINITY;
+
 	/*
 	 * set_cpus_allowed_ptr() will fail if the cpumask doesn't have any
 	 * online CPUs.  It'll be re-applied when any of the CPUs come up.
 	 */
-	set_user_nice(worker->task, pool->attrs->nice);
 	set_cpus_allowed_ptr(worker->task, pool->attrs->cpumask);
 
-	/* prevent userland from meddling with cpumask of workqueue workers */
-	worker->task->flags |= PF_NO_SETAFFINITY;
-
 	/*
 	 * The caller is responsible for ensuring %POOL_DISASSOCIATED
 	 * remains stable across this function.  See the comments above the
@@ -4106,7 +4117,7 @@
 static int alloc_and_link_pwqs(struct workqueue_struct *wq)
 {
 	bool highpri = wq->flags & WQ_HIGHPRI;
-	int cpu;
+	int cpu, ret;
 
 	if (!(wq->flags & WQ_UNBOUND)) {
 		wq->cpu_pwqs = alloc_percpu(struct pool_workqueue);
@@ -4126,6 +4137,13 @@
 			mutex_unlock(&wq->mutex);
 		}
 		return 0;
+	} else if (wq->flags & __WQ_ORDERED) {
+		ret = apply_workqueue_attrs(wq, ordered_wq_attrs[highpri]);
+		/* there should only be single pwq for ordering guarantee */
+		WARN(!ret && (wq->pwqs.next != &wq->dfl_pwq->pwqs_node ||
+			      wq->pwqs.prev != &wq->dfl_pwq->pwqs_node),
+		     "ordering guarantee broken for workqueue %s\n", wq->name);
+		return ret;
 	} else {
 		return apply_workqueue_attrs(wq, unbound_std_wq_attrs[highpri]);
 	}
@@ -5009,10 +5027,6 @@
 	int std_nice[NR_STD_WORKER_POOLS] = { 0, HIGHPRI_NICE_LEVEL };
 	int i, cpu;
 
-	/* make sure we have enough bits for OFFQ pool ID */
-	BUILD_BUG_ON((1LU << (BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT)) <
-		     WORK_CPU_END * NR_STD_WORKER_POOLS);
-
 	WARN_ON(__alignof__(struct pool_workqueue) < __alignof__(long long));
 
 	pwq_cache = KMEM_CACHE(pool_workqueue, SLAB_PANIC);
@@ -5051,13 +5065,23 @@
 		}
 	}
 
-	/* create default unbound wq attrs */
+	/* create default unbound and ordered wq attrs */
 	for (i = 0; i < NR_STD_WORKER_POOLS; i++) {
 		struct workqueue_attrs *attrs;
 
 		BUG_ON(!(attrs = alloc_workqueue_attrs(GFP_KERNEL)));
 		attrs->nice = std_nice[i];
 		unbound_std_wq_attrs[i] = attrs;
+
+		/*
+		 * An ordered wq should have only one pwq as ordering is
+		 * guaranteed by max_active which is enforced by pwqs.
+		 * Turn off NUMA so that dfl_pwq is used for all nodes.
+		 */
+		BUG_ON(!(attrs = alloc_workqueue_attrs(GFP_KERNEL)));
+		attrs->nice = std_nice[i];
+		attrs->no_numa = true;
+		ordered_wq_attrs[i] = attrs;
 	}
 
 	system_wq = alloc_workqueue("events", 0, 0);
diff --git a/lib/lockref.c b/lib/lockref.c
index d2b123f..f07a40d 100644
--- a/lib/lockref.c
+++ b/lib/lockref.c
@@ -1,5 +1,6 @@
 #include <linux/export.h>
 #include <linux/lockref.h>
+#include <linux/mutex.h>
 
 #if USE_CMPXCHG_LOCKREF
 
@@ -12,14 +13,6 @@
 #endif
 
 /*
- * Allow architectures to override the default cpu_relax() within CMPXCHG_LOOP.
- * This is useful for architectures with an expensive cpu_relax().
- */
-#ifndef arch_mutex_cpu_relax
-# define arch_mutex_cpu_relax() cpu_relax()
-#endif
-
-/*
  * Note that the "cmpxchg()" reloads the "old" value for the
  * failure case.
  */
diff --git a/security/integrity/digsig.c b/security/integrity/digsig.c
index 77ca965..b4af4eb 100644
--- a/security/integrity/digsig.c
+++ b/security/integrity/digsig.c
@@ -13,9 +13,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/err.h>
-#include <linux/sched.h>
 #include <linux/rbtree.h>
-#include <linux/cred.h>
 #include <linux/key-type.h>
 #include <linux/digsig.h>
 
@@ -23,19 +21,11 @@
 
 static struct key *keyring[INTEGRITY_KEYRING_MAX];
 
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
-	".evm",
-	".module",
-	".ima",
-};
-#else
 static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
 	"_evm",
 	"_module",
 	"_ima",
 };
-#endif
 
 int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
 			    const char *digest, int digestlen)
@@ -45,7 +35,7 @@
 
 	if (!keyring[id]) {
 		keyring[id] =
-		    request_key(&key_type_keyring, keyring_name[id], NULL);
+			request_key(&key_type_keyring, keyring_name[id], NULL);
 		if (IS_ERR(keyring[id])) {
 			int err = PTR_ERR(keyring[id]);
 			pr_err("no %s keyring: %d\n", keyring_name[id], err);
@@ -66,21 +56,3 @@
 
 	return -EOPNOTSUPP;
 }
-
-int integrity_init_keyring(const unsigned int id)
-{
-	const struct cred *cred = current_cred();
-	const struct user_struct *user = cred->user;
-
-	keyring[id] = keyring_alloc(keyring_name[id], KUIDT_INIT(0),
-				    KGIDT_INIT(0), cred,
-				    ((KEY_POS_ALL & ~KEY_POS_SETATTR) |
-				     KEY_USR_VIEW | KEY_USR_READ),
-				    KEY_ALLOC_NOT_IN_QUOTA, user->uid_keyring);
-	if (!IS_ERR(keyring[id]))
-		set_bit(KEY_FLAG_TRUSTED_ONLY, &keyring[id]->flags);
-	else
-		pr_info("Can't allocate %s keyring (%ld)\n",
-			keyring_name[id], PTR_ERR(keyring[id]));
-	return 0;
-}
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index dad8d4c..81a2797 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -123,11 +123,3 @@
 	  For more information on integrity appraisal refer to:
 	  <http://linux-ima.sourceforge.net>
 	  If unsure, say N.
-
-config IMA_TRUSTED_KEYRING
-	bool "Require all keys on the _ima keyring be signed"
-	depends on IMA_APPRAISE && SYSTEM_TRUSTED_KEYRING
-	default y
-	help
-	   This option requires that all keys added to the _ima
-	   keyring be signed by a key on the system trusted keyring.
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index bf03c6a..9636e17 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -26,7 +26,8 @@
 
 #include "../integrity.h"
 
-enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_ASCII };
+enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN,
+		     IMA_SHOW_ASCII };
 enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 };
 
 /* digest size for IMA, fits SHA1 or MD5 */
@@ -97,7 +98,8 @@
 			   const char *op, struct inode *inode,
 			   const unsigned char *filename);
 int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash);
-int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
+int ima_calc_field_array_hash(struct ima_field_data *field_data,
+			      struct ima_template_desc *desc, int num_fields,
 			      struct ima_digest_data *hash);
 int __init ima_calc_boot_aggregate(struct ima_digest_data *hash);
 void ima_add_violation(struct file *file, const unsigned char *filename,
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index 0e75408..8037484 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -94,6 +94,7 @@
 		/* this function uses default algo */
 		hash.hdr.algo = HASH_ALGO_SHA1;
 		result = ima_calc_field_array_hash(&entry->template_data[0],
+						   entry->template_desc,
 						   num_fields, &hash.hdr);
 		if (result < 0) {
 			integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
index 46353ee..734e946 100644
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -381,14 +381,3 @@
 	}
 	return result;
 }
-
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static int __init init_ima_keyring(void)
-{
-	int ret;
-
-	ret = integrity_init_keyring(INTEGRITY_KEYRING_IMA);
-	return 0;
-}
-late_initcall(init_ima_keyring);
-#endif
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 676e029..fdf60de 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -140,6 +140,7 @@
  * Calculate the hash of template data
  */
 static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
+					 struct ima_template_desc *td,
 					 int num_fields,
 					 struct ima_digest_data *hash,
 					 struct crypto_shash *tfm)
@@ -160,9 +161,13 @@
 		return rc;
 
 	for (i = 0; i < num_fields; i++) {
-		rc = crypto_shash_update(&desc.shash,
-					 (const u8 *) &field_data[i].len,
-					 sizeof(field_data[i].len));
+		if (strcmp(td->name, IMA_TEMPLATE_IMA_NAME) != 0) {
+			rc = crypto_shash_update(&desc.shash,
+						(const u8 *) &field_data[i].len,
+						sizeof(field_data[i].len));
+			if (rc)
+				break;
+		}
 		rc = crypto_shash_update(&desc.shash, field_data[i].data,
 					 field_data[i].len);
 		if (rc)
@@ -175,7 +180,8 @@
 	return rc;
 }
 
-int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
+int ima_calc_field_array_hash(struct ima_field_data *field_data,
+			      struct ima_template_desc *desc, int num_fields,
 			      struct ima_digest_data *hash)
 {
 	struct crypto_shash *tfm;
@@ -185,7 +191,8 @@
 	if (IS_ERR(tfm))
 		return PTR_ERR(tfm);
 
-	rc = ima_calc_field_array_hash_tfm(field_data, num_fields, hash, tfm);
+	rc = ima_calc_field_array_hash_tfm(field_data, desc, num_fields,
+					   hash, tfm);
 
 	ima_free_tfm(tfm);
 
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index d47a7c8..db01125 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -120,6 +120,7 @@
 	struct ima_template_entry *e;
 	int namelen;
 	u32 pcr = CONFIG_IMA_MEASURE_PCR_IDX;
+	bool is_ima_template = false;
 	int i;
 
 	/* get entry */
@@ -145,14 +146,21 @@
 	ima_putc(m, e->template_desc->name, namelen);
 
 	/* 5th:  template length (except for 'ima' template) */
-	if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0)
+	if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) == 0)
+		is_ima_template = true;
+
+	if (!is_ima_template)
 		ima_putc(m, &e->template_data_len,
 			 sizeof(e->template_data_len));
 
 	/* 6th:  template specific data */
 	for (i = 0; i < e->template_desc->num_fields; i++) {
-		e->template_desc->fields[i]->field_show(m, IMA_SHOW_BINARY,
-							&e->template_data[i]);
+		enum ima_show_type show = IMA_SHOW_BINARY;
+		struct ima_template_field *field = e->template_desc->fields[i];
+
+		if (is_ima_template && strcmp(field->field_id, "d") == 0)
+			show = IMA_SHOW_BINARY_NO_FIELD_LEN;
+		field->field_show(m, show, &e->template_data[i]);
 	}
 	return 0;
 }
diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c
index 4e5da99..913e192 100644
--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -90,7 +90,7 @@
 	return NULL;
 }
 
-static int template_fmt_size(char *template_fmt)
+static int template_fmt_size(const char *template_fmt)
 {
 	char c;
 	int template_fmt_len = strlen(template_fmt);
@@ -106,23 +106,28 @@
 	return j + 1;
 }
 
-static int template_desc_init_fields(char *template_fmt,
+static int template_desc_init_fields(const char *template_fmt,
 				     struct ima_template_field ***fields,
 				     int *num_fields)
 {
-	char *c, *template_fmt_ptr = template_fmt;
+	char *c, *template_fmt_copy;
 	int template_num_fields = template_fmt_size(template_fmt);
 	int i, result = 0;
 
 	if (template_num_fields > IMA_TEMPLATE_NUM_FIELDS_MAX)
 		return -EINVAL;
 
+	/* copying is needed as strsep() modifies the original buffer */
+	template_fmt_copy = kstrdup(template_fmt, GFP_KERNEL);
+	if (template_fmt_copy == NULL)
+		return -ENOMEM;
+
 	*fields = kzalloc(template_num_fields * sizeof(*fields), GFP_KERNEL);
 	if (*fields == NULL) {
 		result = -ENOMEM;
 		goto out;
 	}
-	for (i = 0; (c = strsep(&template_fmt_ptr, "|")) != NULL &&
+	for (i = 0; (c = strsep(&template_fmt_copy, "|")) != NULL &&
 	     i < template_num_fields; i++) {
 		struct ima_template_field *f = lookup_template_field(c);
 
@@ -133,10 +138,12 @@
 		(*fields)[i] = f;
 	}
 	*num_fields = i;
-	return 0;
 out:
-	kfree(*fields);
-	*fields = NULL;
+	if (result < 0) {
+		kfree(*fields);
+		*fields = NULL;
+	}
+	kfree(template_fmt_copy);
 	return result;
 }
 
diff --git a/security/integrity/ima/ima_template_lib.c b/security/integrity/ima/ima_template_lib.c
index 6d66ad6..c38adcc 100644
--- a/security/integrity/ima/ima_template_lib.c
+++ b/security/integrity/ima/ima_template_lib.c
@@ -109,9 +109,12 @@
 					  enum data_formats datafmt,
 					  struct ima_field_data *field_data)
 {
-	ima_putc(m, &field_data->len, sizeof(u32));
+	if (show != IMA_SHOW_BINARY_NO_FIELD_LEN)
+		ima_putc(m, &field_data->len, sizeof(u32));
+
 	if (!field_data->len)
 		return;
+
 	ima_putc(m, field_data->data, field_data->len);
 }
 
@@ -125,6 +128,7 @@
 		ima_show_template_data_ascii(m, show, datafmt, field_data);
 		break;
 	case IMA_SHOW_BINARY:
+	case IMA_SHOW_BINARY_NO_FIELD_LEN:
 		ima_show_template_data_binary(m, show, datafmt, field_data);
 		break;
 	default:
diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h
index b9e7c13..2fb5e53 100644
--- a/security/integrity/integrity.h
+++ b/security/integrity/integrity.h
@@ -137,19 +137,12 @@
 #ifdef CONFIG_INTEGRITY_ASYMMETRIC_KEYS
 int asymmetric_verify(struct key *keyring, const char *sig,
 		      int siglen, const char *data, int datalen);
-
-int integrity_init_keyring(const unsigned int id);
 #else
 static inline int asymmetric_verify(struct key *keyring, const char *sig,
 				    int siglen, const char *data, int datalen)
 {
 	return -EOPNOTSUPP;
 }
-
-static int integrity_init_keyring(const unsigned int id)
-{
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_INTEGRITY_AUDIT
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
index 992ae38..1b37228 100644
--- a/sound/soc/atmel/sam9x5_wm8731.c
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -97,6 +97,8 @@
 		goto out;
 	}
 
+	snd_soc_card_set_drvdata(card, priv);
+
 	card->dev = &pdev->dev;
 	card->owner = THIS_MODULE;
 	card->dai_link = dai;
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index c3c7396..99b359e 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -248,19 +248,6 @@
 ARIZONA_MIXER_CONTROLS("SPKDAT2L", ARIZONA_OUT6LMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("SPKDAT2R", ARIZONA_OUT6RMIX_INPUT_1_SOURCE),
 
-SOC_SINGLE("HPOUT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_1L,
-	   ARIZONA_OUT1_OSR_SHIFT, 1, 0),
-SOC_SINGLE("HPOUT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_2L,
-	   ARIZONA_OUT2_OSR_SHIFT, 1, 0),
-SOC_SINGLE("HPOUT3 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_3L,
-	   ARIZONA_OUT3_OSR_SHIFT, 1, 0),
-SOC_SINGLE("Speaker High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_4L,
-	   ARIZONA_OUT4_OSR_SHIFT, 1, 0),
-SOC_SINGLE("SPKDAT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_5L,
-	   ARIZONA_OUT5_OSR_SHIFT, 1, 0),
-SOC_SINGLE("SPKDAT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_6L,
-	   ARIZONA_OUT6_OSR_SHIFT, 1, 0),
-
 SOC_DOUBLE_R("HPOUT1 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_1L,
 	     ARIZONA_DAC_DIGITAL_VOLUME_1R, ARIZONA_OUT1L_MUTE_SHIFT, 1, 1),
 SOC_DOUBLE_R("HPOUT2 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_2L,
@@ -293,18 +280,6 @@
 		 ARIZONA_DAC_DIGITAL_VOLUME_6R, ARIZONA_OUT6L_VOL_SHIFT,
 		 0xbf, 0, digital_tlv),
 
-SOC_DOUBLE_R_RANGE_TLV("HPOUT1 Volume", ARIZONA_OUTPUT_PATH_CONFIG_1L,
-		       ARIZONA_OUTPUT_PATH_CONFIG_1R,
-		       ARIZONA_OUT1L_PGA_VOL_SHIFT,
-		       0x34, 0x40, 0, ana_tlv),
-SOC_DOUBLE_R_RANGE_TLV("HPOUT2 Volume", ARIZONA_OUTPUT_PATH_CONFIG_2L,
-		       ARIZONA_OUTPUT_PATH_CONFIG_2R,
-		       ARIZONA_OUT2L_PGA_VOL_SHIFT,
-		       0x34, 0x40, 0, ana_tlv),
-SOC_DOUBLE_R_RANGE_TLV("HPOUT3 Volume", ARIZONA_OUTPUT_PATH_CONFIG_3L,
-		       ARIZONA_OUTPUT_PATH_CONFIG_3R,
-		       ARIZONA_OUT3L_PGA_VOL_SHIFT, 0x34, 0x40, 0, ana_tlv),
-
 SOC_DOUBLE("SPKDAT1 Switch", ARIZONA_PDM_SPK1_CTRL_1, ARIZONA_SPK1L_MUTE_SHIFT,
 	   ARIZONA_SPK1R_MUTE_SHIFT, 1, 1),
 SOC_DOUBLE("SPKDAT2 Switch", ARIZONA_PDM_SPK2_CTRL_1, ARIZONA_SPK2L_MUTE_SHIFT,
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 456bb8c..bc7472c 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -447,10 +447,10 @@
 		iface |= 0x0001;
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
-		iface |= 0x0003;
+		iface |= 0x0013;
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
-		iface |= 0x0013;
+		iface |= 0x0003;
 		break;
 	default:
 		return -EINVAL;
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 253c88b..4f05fb8 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -1259,6 +1259,8 @@
 
 		/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
 		snd_soc_write(codec, WM8990_ANTIPOP2, 0x0);
+
+		codec->cache_sync = 1;
 		break;
 	}
 
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index eb43738..3665f61 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -69,7 +69,6 @@
 		return -ENOMEM;
 
 	card->dev = &op->dev;
-	platform_set_drvdata(op, pdata);
 
 	pdata->card = card;
 
@@ -98,6 +97,8 @@
 	if (ret)
 		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
 
+	platform_set_drvdata(op, pdata);
+
 	return ret;
 }
 
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index d34d917..0b18f65 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -33,6 +33,10 @@
 	 SNDRV_PCM_FMTBIT_S24_LE | \
 	 SNDRV_PCM_FMTBIT_S32_LE)
 
+#define KIRKWOOD_SPDIF_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE)
+
 static int kirkwood_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		unsigned int fmt)
 {
@@ -244,15 +248,15 @@
 				   ctl);
 	}
 
-	if (dai->id == 0)
-		ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN;	/* i2s */
-	else
-		ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN;	/* spdif */
-
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 		/* configure */
 		ctl = priv->ctl_play;
+		if (dai->id == 0)
+			ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN;	/* i2s */
+		else
+			ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN;	/* spdif */
+
 		value = ctl & ~KIRKWOOD_PLAYCTL_ENABLE_MASK;
 		writel(value, priv->io + KIRKWOOD_PLAYCTL);
 
@@ -449,14 +453,14 @@
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
 				SNDRV_PCM_RATE_96000,
-		.formats = KIRKWOOD_I2S_FORMATS,
+		.formats = KIRKWOOD_SPDIF_FORMATS,
 	},
 	.capture = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
 				SNDRV_PCM_RATE_96000,
-		.formats = KIRKWOOD_I2S_FORMATS,
+		.formats = KIRKWOOD_SPDIF_FORMATS,
 	},
 	.ops = &kirkwood_i2s_dai_ops,
     },
@@ -493,7 +497,7 @@
 		.rates = SNDRV_PCM_RATE_8000_192000 |
 			 SNDRV_PCM_RATE_CONTINUOUS |
 			 SNDRV_PCM_RATE_KNOT,
-		.formats = KIRKWOOD_I2S_FORMATS,
+		.formats = KIRKWOOD_SPDIF_FORMATS,
 	},
 	.capture = {
 		.channels_min = 1,
@@ -501,7 +505,7 @@
 		.rates = SNDRV_PCM_RATE_8000_192000 |
 			 SNDRV_PCM_RATE_CONTINUOUS |
 			 SNDRV_PCM_RATE_KNOT,
-		.formats = KIRKWOOD_I2S_FORMATS,
+		.formats = KIRKWOOD_SPDIF_FORMATS,
 	},
 	.ops = &kirkwood_i2s_dai_ops,
     },
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 6d216cb..3fde9e4 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -100,12 +100,12 @@
 				     SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
 
 	n810_ext_control(&codec->dapm);
-	return clk_enable(sys_clkout2);
+	return clk_prepare_enable(sys_clkout2);
 }
 
 static void n810_shutdown(struct snd_pcm_substream *substream)
 {
-	clk_disable(sys_clkout2);
+	clk_disable_unprepare(sys_clkout2);
 }
 
 static int n810_hw_params(struct snd_pcm_substream *substream,
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 14011d9..ff60e11 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -37,6 +37,7 @@
 config SND_SOC_RCAR
 	tristate "R-Car series SRU/SCU/SSIU/SSI support"
 	select SND_SIMPLE_CARD
+	select REGMAP
 	help
 	  This option enables R-Car SUR/SCU/SSIU/SSI sound support
 
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 4e53d87..a66783e 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3212,11 +3212,11 @@
 			break;
 		case 2:
 			((u16 *)(&ucontrol->value.bytes.data))[0]
-				&= ~params->mask;
+				&= cpu_to_be16(~params->mask);
 			break;
 		case 4:
 			((u32 *)(&ucontrol->value.bytes.data))[0]
-				&= ~params->mask;
+				&= cpu_to_be32(~params->mask);
 			break;
 		default:
 			return -EINVAL;
diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c
index b1d7322..3449c1e 100644
--- a/sound/soc/soc-devres.c
+++ b/sound/soc/soc-devres.c
@@ -66,7 +66,7 @@
  */
 int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card)
 {
-	struct device **ptr;
+	struct snd_soc_card **ptr;
 	int ret;
 
 	ptr = devres_alloc(devm_card_release, sizeof(*ptr), GFP_KERNEL);
@@ -75,7 +75,7 @@
 
 	ret = snd_soc_register_card(card);
 	if (ret == 0) {
-		*ptr = dev;
+		*ptr = card;
 		devres_add(dev, ptr);
 	} else {
 		devres_free(ptr);
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 42782c0..11a90cd 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -148,12 +148,12 @@
 	}
 }
 
-static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw,
+static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
 	struct snd_soc_pcm_stream *codec_stream,
 	struct snd_soc_pcm_stream *cpu_stream)
 {
-	hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min);
-	hw->rate_max = max(codec_stream->rate_max, cpu_stream->rate_max);
+	struct snd_pcm_hardware *hw = &runtime->hw;
+
 	hw->channels_min = max(codec_stream->channels_min,
 		cpu_stream->channels_min);
 	hw->channels_max = min(codec_stream->channels_max,
@@ -166,6 +166,13 @@
 	if (cpu_stream->rates
 		& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
 		hw->rates |= codec_stream->rates;
+
+	snd_pcm_limit_hw_rates(runtime);
+
+	hw->rate_min = max(hw->rate_min, cpu_stream->rate_min);
+	hw->rate_min = max(hw->rate_min, codec_stream->rate_min);
+	hw->rate_max = min_not_zero(hw->rate_max, cpu_stream->rate_max);
+	hw->rate_max = min_not_zero(hw->rate_max, codec_stream->rate_max);
 }
 
 /*
@@ -235,15 +242,14 @@
 
 	/* Check that the codec and cpu DAIs are compatible */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->playback,
+		soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->playback,
 			&cpu_dai_drv->playback);
 	} else {
-		soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->capture,
+		soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->capture,
 			&cpu_dai_drv->capture);
 	}
 
 	ret = -EINVAL;
-	snd_pcm_limit_hw_rates(runtime);
 	if (!runtime->hw.rates) {
 		printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n",
 			codec_dai->name, cpu_dai->name);
diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1
index 4178eff..7b3646a 100644
--- a/tools/power/cpupower/man/cpupower-idle-info.1
+++ b/tools/power/cpupower/man/cpupower-idle-info.1
@@ -87,4 +87,5 @@
 .fi
 .SH "SEE ALSO"
 .LP
-cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1)
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-set(1)
diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1
new file mode 100644
index 0000000..6b16072
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-idle-set.1
@@ -0,0 +1,71 @@
+.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP
+cpupower idle\-set \- Utility to set cpu idle state specific kernel options
+.SH "SYNTAX"
+.LP
+cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP
+The cpupower idle\-set subcommand allows to set cpu idle, also called cpu
+sleep state, specific options offered by the kernel. One example is disabling
+sleep states. This can be handy for power vs performance tuning.
+.SH "OPTIONS"
+.LP
+.TP
+\fB\-d\fR \fB\-\-disable\fR
+Disable a specific processor sleep state.
+.TP
+\fB\-e\fR \fB\-\-enable\fR
+Enable a specific processor sleep state.
+
+.SH "REMARKS"
+.LP
+Cpuidle Governors Policy on Disabling Sleep States
+
+.RS 4
+Depending on the used  cpuidle governor, implementing the kernel policy
+how to choose sleep states, subsequent sleep states on this core, might get
+disabled as well.
+
+There are two cpuidle governors ladder and menu. While the ladder
+governor is always available, if CONFIG_CPU_IDLE is selected, the
+menu governor additionally requires CONFIG_NO_HZ.
+
+The behavior and the effect of the disable variable depends on the
+implementation of a particular governor. In the ladder governor, for
+example, it is not coherent, i.e. if one is disabling a light state,
+then all deeper states are disabled as well. Likewise, if one enables a
+deep state but a lighter state still is disabled, then this has no effect.
+.RE
+.LP
+Disabling the Lightest Sleep State may not have any Affect
+
+.RS 4
+If criteria are not met to enter deeper sleep states and the lightest sleep
+state is chosen when idle, the kernel may still enter this sleep state,
+irrespective of whether it is disabled or not. This is also reflected in
+the usage count of the disabled sleep state when using the cpupower idle-info
+command.
+.RE
+.LP
+Selecting specific CPU Cores
+
+.RS 4
+By default processor sleep states of all CPU cores are set. Please refer
+to the cpupower(1) manpage in the \-\-cpu option section how to disable
+C-states of specific cores.
+.RE
+.SH "FILES"
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP
+\fI/sys/devices/system/cpu/cpuidle/*\fP
+.fi
+.SH "AUTHORS"
+.nf
+Thomas Renninger <trenn@suse.de>
+.fi
+.SH "SEE ALSO"
+.LP
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-info(1)
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
index 5cdc600..851c7a1 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.c
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -278,7 +278,7 @@
 int sysfs_is_idlestate_disabled(unsigned int cpu,
 				unsigned int idlestate)
 {
-	if (sysfs_get_idlestate_count(cpu) < idlestate)
+	if (sysfs_get_idlestate_count(cpu) <= idlestate)
 		return -1;
 
 	if (!sysfs_idlestate_file_exists(cpu, idlestate,
@@ -303,7 +303,7 @@
 	char value[SYSFS_PATH_MAX];
 	int bytes_written;
 
-	if (sysfs_get_idlestate_count(cpu) < idlestate)
+	if (sysfs_get_idlestate_count(cpu) <= idlestate)
 		return -1;
 
 	if (!sysfs_idlestate_file_exists(cpu, idlestate,