Merge remote-tracking branches 'asoc/topic/max98090' and 'asoc/topic/max98095' into asoc-next
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index e4c8b36..a5e63fa 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -10,6 +10,12 @@
- interrupts : The CODEC's interrupt output.
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
Pins on the device (for linking into audio routes):
* MIC1
diff --git a/Documentation/devicetree/bindings/sound/max98095.txt b/Documentation/devicetree/bindings/sound/max98095.txt
index bacbeaa..318a4c8 100644
--- a/Documentation/devicetree/bindings/sound/max98095.txt
+++ b/Documentation/devicetree/bindings/sound/max98095.txt
@@ -8,6 +8,12 @@
- reg : The I2C address of the device.
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
Example:
max98095: codec@11 {
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 9b76f5a..f5fccc7 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -1547,19 +1548,19 @@
};
static const int user_pclk_rates[] = {
- 13000000, 13000000
+ 13000000, 13000000, 19200000, 19200000,
};
static const int user_lrclk_rates[] = {
- 44100, 48000
+ 44100, 48000, 44100, 48000,
};
static const unsigned long long ni_value[] = {
- 3528, 768
+ 3528, 768, 441, 8
};
static const unsigned long long mi_value[] = {
- 8125, 1625
+ 8125, 1625, 1500, 25
};
static void max98090_configure_bclk(struct snd_soc_codec *codec)
@@ -1800,6 +1801,19 @@
break;
case SND_SOC_BIAS_PREPARE:
+ /*
+ * SND_SOC_BIAS_PREPARE is called while preparing for a
+ * transition to ON or away from ON. If current bias_level
+ * is SND_SOC_BIAS_ON, then it is preparing for a transition
+ * away from ON. Disable the clock in that case, otherwise
+ * enable it.
+ */
+ if (!IS_ERR(max98090->mclk)) {
+ if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
+ clk_disable_unprepare(max98090->mclk);
+ else
+ clk_prepare_enable(max98090->mclk);
+ }
break;
case SND_SOC_BIAS_STANDBY:
@@ -1929,6 +1943,11 @@
if (freq == max98090->sysclk)
return 0;
+ if (!IS_ERR(max98090->mclk)) {
+ freq = clk_round_rate(max98090->mclk, freq);
+ clk_set_rate(max98090->mclk, freq);
+ }
+
/* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 40MHz)..
@@ -2213,6 +2232,10 @@
dev_dbg(codec->dev, "max98090_probe\n");
+ max98090->mclk = devm_clk_get(codec->dev, "mclk");
+ if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
max98090->codec = codec;
/* Reset the codec, the DSP core, and disable all interrupts */
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index 5a3c8d0..cf1b606 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1524,6 +1524,7 @@
struct snd_soc_codec *codec;
enum max98090_type devtype;
struct max98090_pdata *pdata;
+ struct clk *mclk;
unsigned int sysclk;
unsigned int bclk;
unsigned int lrclk;
diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c
index d6c1e4c..89ec004 100644
--- a/sound/soc/codecs/max98095.c
+++ b/sound/soc/codecs/max98095.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/clk.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -42,6 +43,7 @@
struct regmap *regmap;
enum max98095_type devtype;
struct max98095_pdata *pdata;
+ struct clk *mclk;
unsigned int sysclk;
struct max98095_cdata dai[3];
const char **eq_texts;
@@ -1395,6 +1397,11 @@
if (freq == max98095->sysclk)
return 0;
+ if (!IS_ERR(max98095->mclk)) {
+ freq = clk_round_rate(max98095->mclk, freq);
+ clk_set_rate(max98095->mclk, freq);
+ }
+
/* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 40MHz)..
@@ -1634,6 +1641,19 @@
break;
case SND_SOC_BIAS_PREPARE:
+ /*
+ * SND_SOC_BIAS_PREPARE is called while preparing for a
+ * transition to ON or away from ON. If current bias_level
+ * is SND_SOC_BIAS_ON, then it is preparing for a transition
+ * away from ON. Disable the clock in that case, otherwise
+ * enable it.
+ */
+ if (!IS_ERR(max98095->mclk)) {
+ if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
+ clk_disable_unprepare(max98095->mclk);
+ else
+ clk_prepare_enable(max98095->mclk);
+ }
break;
case SND_SOC_BIAS_STANDBY:
@@ -2238,6 +2258,10 @@
struct i2c_client *client;
int ret = 0;
+ max98095->mclk = devm_clk_get(codec->dev, "mclk");
+ if (PTR_ERR(max98095->mclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
/* reset the codec, the DSP core, and disable all interrupts */
max98095_reset(codec);