| /* |
| * Disk Array driver for Compaq SMART2 Controllers |
| * Copyright 1998 Compaq Computer Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Questions/Comments/Bugfixes to iss_storagedev@hp.com |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/bio.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/major.h> |
| #include <linux/fs.h> |
| #include <linux/blkpg.h> |
| #include <linux/timer.h> |
| #include <linux/proc_fs.h> |
| #include <linux/init.h> |
| #include <linux/hdreg.h> |
| #include <linux/spinlock.h> |
| #include <linux/blkdev.h> |
| #include <linux/genhd.h> |
| #include <linux/scatterlist.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| |
| #define SMART2_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) |
| |
| #define DRIVER_NAME "Compaq SMART2 Driver (v 2.6.0)" |
| #define DRIVER_VERSION SMART2_DRIVER_VERSION(2,6,0) |
| |
| /* Embedded module documentation macros - see modules.h */ |
| /* Original author Chris Frantz - Compaq Computer Corporation */ |
| MODULE_AUTHOR("Compaq Computer Corporation"); |
| MODULE_DESCRIPTION("Driver for Compaq Smart2 Array Controllers version 2.6.0"); |
| MODULE_LICENSE("GPL"); |
| |
| #include "cpqarray.h" |
| #include "ida_cmd.h" |
| #include "smart1,2.h" |
| #include "ida_ioctl.h" |
| |
| #define READ_AHEAD 128 |
| #define NR_CMDS 128 /* This could probably go as high as ~400 */ |
| |
| #define MAX_CTLR 8 |
| #define CTLR_SHIFT 8 |
| |
| #define CPQARRAY_DMA_MASK 0xFFFFFFFF /* 32 bit DMA */ |
| |
| static int nr_ctlr; |
| static ctlr_info_t *hba[MAX_CTLR]; |
| |
| static int eisa[8]; |
| |
| #define NR_PRODUCTS ARRAY_SIZE(products) |
| |
| /* board_id = Subsystem Device ID & Vendor ID |
| * product = Marketing Name for the board |
| * access = Address of the struct of function pointers |
| */ |
| static struct board_type products[] = { |
| { 0x0040110E, "IDA", &smart1_access }, |
| { 0x0140110E, "IDA-2", &smart1_access }, |
| { 0x1040110E, "IAES", &smart1_access }, |
| { 0x2040110E, "SMART", &smart1_access }, |
| { 0x3040110E, "SMART-2/E", &smart2e_access }, |
| { 0x40300E11, "SMART-2/P", &smart2_access }, |
| { 0x40310E11, "SMART-2SL", &smart2_access }, |
| { 0x40320E11, "Smart Array 3200", &smart2_access }, |
| { 0x40330E11, "Smart Array 3100ES", &smart2_access }, |
| { 0x40340E11, "Smart Array 221", &smart2_access }, |
| { 0x40400E11, "Integrated Array", &smart4_access }, |
| { 0x40480E11, "Compaq Raid LC2", &smart4_access }, |
| { 0x40500E11, "Smart Array 4200", &smart4_access }, |
| { 0x40510E11, "Smart Array 4250ES", &smart4_access }, |
| { 0x40580E11, "Smart Array 431", &smart4_access }, |
| }; |
| |
| /* define the PCI info for the PCI cards this driver can control */ |
| static const struct pci_device_id cpqarray_pci_device_id[] = |
| { |
| { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX, |
| 0x0E11, 0x4058, 0, 0, 0}, /* SA431 */ |
| { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX, |
| 0x0E11, 0x4051, 0, 0, 0}, /* SA4250ES */ |
| { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX, |
| 0x0E11, 0x4050, 0, 0, 0}, /* SA4200 */ |
| { PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510, |
| 0x0E11, 0x4048, 0, 0, 0}, /* LC2 */ |
| { PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510, |
| 0x0E11, 0x4040, 0, 0, 0}, /* Integrated Array */ |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, |
| 0x0E11, 0x4034, 0, 0, 0}, /* SA 221 */ |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, |
| 0x0E11, 0x4033, 0, 0, 0}, /* SA 3100ES*/ |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, |
| 0x0E11, 0x4032, 0, 0, 0}, /* SA 3200*/ |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, |
| 0x0E11, 0x4031, 0, 0, 0}, /* SA 2SL*/ |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, |
| 0x0E11, 0x4030, 0, 0, 0}, /* SA 2P */ |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, cpqarray_pci_device_id); |
| |
| static struct gendisk *ida_gendisk[MAX_CTLR][NWD]; |
| |
| /* Debug... */ |
| #define DBG(s) do { s } while(0) |
| /* Debug (general info)... */ |
| #define DBGINFO(s) do { } while(0) |
| /* Debug Paranoid... */ |
| #define DBGP(s) do { } while(0) |
| /* Debug Extra Paranoid... */ |
| #define DBGPX(s) do { } while(0) |
| |
| static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev); |
| static void __iomem *remap_pci_mem(ulong base, ulong size); |
| static int cpqarray_eisa_detect(void); |
| static int pollcomplete(int ctlr); |
| static void getgeometry(int ctlr); |
| static void start_fwbk(int ctlr); |
| |
| static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool); |
| static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool); |
| |
| static void free_hba(int i); |
| static int alloc_cpqarray_hba(void); |
| |
| static int sendcmd( |
| __u8 cmd, |
| int ctlr, |
| void *buff, |
| size_t size, |
| unsigned int blk, |
| unsigned int blkcnt, |
| unsigned int log_unit ); |
| |
| static int ida_open(struct block_device *bdev, fmode_t mode); |
| static int ida_release(struct gendisk *disk, fmode_t mode); |
| static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); |
| static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo); |
| static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io); |
| |
| static void do_ida_request(struct request_queue *q); |
| static void start_io(ctlr_info_t *h); |
| |
| static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c); |
| static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c); |
| static inline void complete_command(cmdlist_t *cmd, int timeout); |
| |
| static irqreturn_t do_ida_intr(int irq, void *dev_id); |
| static void ida_timer(unsigned long tdata); |
| static int ida_revalidate(struct gendisk *disk); |
| static int revalidate_allvol(ctlr_info_t *host); |
| static int cpqarray_register_ctlr(int ctlr, struct pci_dev *pdev); |
| |
| #ifdef CONFIG_PROC_FS |
| static void ida_procinit(int i); |
| static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data); |
| #else |
| static void ida_procinit(int i) {} |
| #endif |
| |
| static inline drv_info_t *get_drv(struct gendisk *disk) |
| { |
| return disk->private_data; |
| } |
| |
| static inline ctlr_info_t *get_host(struct gendisk *disk) |
| { |
| return disk->queue->queuedata; |
| } |
| |
| |
| static struct block_device_operations ida_fops = { |
| .owner = THIS_MODULE, |
| .open = ida_open, |
| .release = ida_release, |
| .locked_ioctl = ida_ioctl, |
| .getgeo = ida_getgeo, |
| .revalidate_disk= ida_revalidate, |
| }; |
| |
| |
| #ifdef CONFIG_PROC_FS |
| |
| static struct proc_dir_entry *proc_array; |
| |
| /* |
| * Get us a file in /proc/array that says something about each controller. |
| * Create /proc/array if it doesn't exist yet. |
| */ |
| static void __init ida_procinit(int i) |
| { |
| if (proc_array == NULL) { |
| proc_array = proc_mkdir("driver/cpqarray", NULL); |
| if (!proc_array) return; |
| } |
| |
| create_proc_read_entry(hba[i]->devname, 0, proc_array, |
| ida_proc_get_info, hba[i]); |
| } |
| |
| /* |
| * Report information about this controller. |
| */ |
| static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) |
| { |
| off_t pos = 0; |
| off_t len = 0; |
| int size, i, ctlr; |
| ctlr_info_t *h = (ctlr_info_t*)data; |
| drv_info_t *drv; |
| #ifdef CPQ_PROC_PRINT_QUEUES |
| cmdlist_t *c; |
| unsigned long flags; |
| #endif |
| |
| ctlr = h->ctlr; |
| size = sprintf(buffer, "%s: Compaq %s Controller\n" |
| " Board ID: 0x%08lx\n" |
| " Firmware Revision: %c%c%c%c\n" |
| " Controller Sig: 0x%08lx\n" |
| " Memory Address: 0x%08lx\n" |
| " I/O Port: 0x%04x\n" |
| " IRQ: %d\n" |
| " Logical drives: %d\n" |
| " Physical drives: %d\n\n" |
| " Current Q depth: %d\n" |
| " Max Q depth since init: %d\n\n", |
| h->devname, |
| h->product_name, |
| (unsigned long)h->board_id, |
| h->firm_rev[0], h->firm_rev[1], h->firm_rev[2], h->firm_rev[3], |
| (unsigned long)h->ctlr_sig, (unsigned long)h->vaddr, |
| (unsigned int) h->io_mem_addr, (unsigned int)h->intr, |
| h->log_drives, h->phys_drives, |
| h->Qdepth, h->maxQsinceinit); |
| |
| pos += size; len += size; |
| |
| size = sprintf(buffer+len, "Logical Drive Info:\n"); |
| pos += size; len += size; |
| |
| for(i=0; i<h->log_drives; i++) { |
| drv = &h->drv[i]; |
| size = sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n", |
| ctlr, i, drv->blk_size, drv->nr_blks); |
| pos += size; len += size; |
| } |
| |
| #ifdef CPQ_PROC_PRINT_QUEUES |
| spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); |
| size = sprintf(buffer+len, "\nCurrent Queues:\n"); |
| pos += size; len += size; |
| |
| c = h->reqQ; |
| size = sprintf(buffer+len, "reqQ = %p", c); pos += size; len += size; |
| if (c) c=c->next; |
| while(c && c != h->reqQ) { |
| size = sprintf(buffer+len, "->%p", c); |
| pos += size; len += size; |
| c=c->next; |
| } |
| |
| c = h->cmpQ; |
| size = sprintf(buffer+len, "\ncmpQ = %p", c); pos += size; len += size; |
| if (c) c=c->next; |
| while(c && c != h->cmpQ) { |
| size = sprintf(buffer+len, "->%p", c); |
| pos += size; len += size; |
| c=c->next; |
| } |
| |
| size = sprintf(buffer+len, "\n"); pos += size; len += size; |
| spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); |
| #endif |
| size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n", |
| h->nr_allocs, h->nr_frees); |
| pos += size; len += size; |
| |
| *eof = 1; |
| *start = buffer+offset; |
| len -= offset; |
| if (len>length) |
| len = length; |
| return len; |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| module_param_array(eisa, int, NULL, 0); |
| |
| static void release_io_mem(ctlr_info_t *c) |
| { |
| /* if IO mem was not protected do nothing */ |
| if( c->io_mem_addr == 0) |
| return; |
| release_region(c->io_mem_addr, c->io_mem_length); |
| c->io_mem_addr = 0; |
| c->io_mem_length = 0; |
| } |
| |
| static void __devexit cpqarray_remove_one(int i) |
| { |
| int j; |
| char buff[4]; |
| |
| /* sendcmd will turn off interrupt, and send the flush... |
| * To write all data in the battery backed cache to disks |
| * no data returned, but don't want to send NULL to sendcmd */ |
| if( sendcmd(FLUSH_CACHE, i, buff, 4, 0, 0, 0)) |
| { |
| printk(KERN_WARNING "Unable to flush cache on controller %d\n", |
| i); |
| } |
| free_irq(hba[i]->intr, hba[i]); |
| iounmap(hba[i]->vaddr); |
| unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname); |
| del_timer(&hba[i]->timer); |
| remove_proc_entry(hba[i]->devname, proc_array); |
| pci_free_consistent(hba[i]->pci_dev, |
| NR_CMDS * sizeof(cmdlist_t), (hba[i]->cmd_pool), |
| hba[i]->cmd_pool_dhandle); |
| kfree(hba[i]->cmd_pool_bits); |
| for(j = 0; j < NWD; j++) { |
| if (ida_gendisk[i][j]->flags & GENHD_FL_UP) |
| del_gendisk(ida_gendisk[i][j]); |
| put_disk(ida_gendisk[i][j]); |
| } |
| blk_cleanup_queue(hba[i]->queue); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| } |
| |
| static void __devexit cpqarray_remove_one_pci (struct pci_dev *pdev) |
| { |
| int i; |
| ctlr_info_t *tmp_ptr; |
| |
| if (pci_get_drvdata(pdev) == NULL) { |
| printk( KERN_ERR "cpqarray: Unable to remove device \n"); |
| return; |
| } |
| |
| tmp_ptr = pci_get_drvdata(pdev); |
| i = tmp_ptr->ctlr; |
| if (hba[i] == NULL) { |
| printk(KERN_ERR "cpqarray: controller %d appears to have" |
| "already been removed \n", i); |
| return; |
| } |
| pci_set_drvdata(pdev, NULL); |
| |
| cpqarray_remove_one(i); |
| } |
| |
| /* removing an instance that was not removed automatically.. |
| * must be an eisa card. |
| */ |
| static void __devexit cpqarray_remove_one_eisa (int i) |
| { |
| if (hba[i] == NULL) { |
| printk(KERN_ERR "cpqarray: controller %d appears to have" |
| "already been removed \n", i); |
| return; |
| } |
| cpqarray_remove_one(i); |
| } |
| |
| /* pdev is NULL for eisa */ |
| static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev) |
| { |
| struct request_queue *q; |
| int j; |
| |
| /* |
| * register block devices |
| * Find disks and fill in structs |
| * Get an interrupt, set the Q depth and get into /proc |
| */ |
| |
| /* If this successful it should insure that we are the only */ |
| /* instance of the driver */ |
| if (register_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname)) { |
| goto Enomem4; |
| } |
| hba[i]->access.set_intr_mask(hba[i], 0); |
| if (request_irq(hba[i]->intr, do_ida_intr, |
| IRQF_DISABLED|IRQF_SHARED, hba[i]->devname, hba[i])) |
| { |
| printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n", |
| hba[i]->intr, hba[i]->devname); |
| goto Enomem3; |
| } |
| |
| for (j=0; j<NWD; j++) { |
| ida_gendisk[i][j] = alloc_disk(1 << NWD_SHIFT); |
| if (!ida_gendisk[i][j]) |
| goto Enomem2; |
| } |
| |
| hba[i]->cmd_pool = pci_alloc_consistent( |
| hba[i]->pci_dev, NR_CMDS * sizeof(cmdlist_t), |
| &(hba[i]->cmd_pool_dhandle)); |
| hba[i]->cmd_pool_bits = kcalloc( |
| DIV_ROUND_UP(NR_CMDS, BITS_PER_LONG), sizeof(unsigned long), |
| GFP_KERNEL); |
| |
| if (!hba[i]->cmd_pool_bits || !hba[i]->cmd_pool) |
| goto Enomem1; |
| |
| memset(hba[i]->cmd_pool, 0, NR_CMDS * sizeof(cmdlist_t)); |
| printk(KERN_INFO "cpqarray: Finding drives on %s", |
| hba[i]->devname); |
| |
| spin_lock_init(&hba[i]->lock); |
| q = blk_init_queue(do_ida_request, &hba[i]->lock); |
| if (!q) |
| goto Enomem1; |
| |
| hba[i]->queue = q; |
| q->queuedata = hba[i]; |
| |
| getgeometry(i); |
| start_fwbk(i); |
| |
| ida_procinit(i); |
| |
| if (pdev) |
| blk_queue_bounce_limit(q, hba[i]->pci_dev->dma_mask); |
| |
| /* This is a hardware imposed limit. */ |
| blk_queue_max_hw_segments(q, SG_MAX); |
| |
| /* This is a driver limit and could be eliminated. */ |
| blk_queue_max_phys_segments(q, SG_MAX); |
| |
| init_timer(&hba[i]->timer); |
| hba[i]->timer.expires = jiffies + IDA_TIMER; |
| hba[i]->timer.data = (unsigned long)hba[i]; |
| hba[i]->timer.function = ida_timer; |
| add_timer(&hba[i]->timer); |
| |
| /* Enable IRQ now that spinlock and rate limit timer are set up */ |
| hba[i]->access.set_intr_mask(hba[i], FIFO_NOT_EMPTY); |
| |
| for(j=0; j<NWD; j++) { |
| struct gendisk *disk = ida_gendisk[i][j]; |
| drv_info_t *drv = &hba[i]->drv[j]; |
| sprintf(disk->disk_name, "ida/c%dd%d", i, j); |
| disk->major = COMPAQ_SMART2_MAJOR + i; |
| disk->first_minor = j<<NWD_SHIFT; |
| disk->fops = &ida_fops; |
| if (j && !drv->nr_blks) |
| continue; |
| blk_queue_hardsect_size(hba[i]->queue, drv->blk_size); |
| set_capacity(disk, drv->nr_blks); |
| disk->queue = hba[i]->queue; |
| disk->private_data = drv; |
| add_disk(disk); |
| } |
| |
| /* done ! */ |
| return(i); |
| |
| Enomem1: |
| nr_ctlr = i; |
| kfree(hba[i]->cmd_pool_bits); |
| if (hba[i]->cmd_pool) |
| pci_free_consistent(hba[i]->pci_dev, NR_CMDS*sizeof(cmdlist_t), |
| hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); |
| Enomem2: |
| while (j--) { |
| put_disk(ida_gendisk[i][j]); |
| ida_gendisk[i][j] = NULL; |
| } |
| free_irq(hba[i]->intr, hba[i]); |
| Enomem3: |
| unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname); |
| Enomem4: |
| if (pdev) |
| pci_set_drvdata(pdev, NULL); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| |
| printk( KERN_ERR "cpqarray: out of memory"); |
| |
| return -1; |
| } |
| |
| static int __init cpqarray_init_one( struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int i; |
| |
| printk(KERN_DEBUG "cpqarray: Device 0x%x has been found at" |
| " bus %d dev %d func %d\n", |
| pdev->device, pdev->bus->number, PCI_SLOT(pdev->devfn), |
| PCI_FUNC(pdev->devfn)); |
| i = alloc_cpqarray_hba(); |
| if( i < 0 ) |
| return (-1); |
| memset(hba[i], 0, sizeof(ctlr_info_t)); |
| sprintf(hba[i]->devname, "ida%d", i); |
| hba[i]->ctlr = i; |
| /* Initialize the pdev driver private data */ |
| pci_set_drvdata(pdev, hba[i]); |
| |
| if (cpqarray_pci_init(hba[i], pdev) != 0) { |
| pci_set_drvdata(pdev, NULL); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| return -1; |
| } |
| |
| return (cpqarray_register_ctlr(i, pdev)); |
| } |
| |
| static struct pci_driver cpqarray_pci_driver = { |
| .name = "cpqarray", |
| .probe = cpqarray_init_one, |
| .remove = __devexit_p(cpqarray_remove_one_pci), |
| .id_table = cpqarray_pci_device_id, |
| }; |
| |
| /* |
| * This is it. Find all the controllers and register them. |
| * returns the number of block devices registered. |
| */ |
| static int __init cpqarray_init(void) |
| { |
| int num_cntlrs_reg = 0; |
| int i; |
| int rc = 0; |
| |
| /* detect controllers */ |
| printk(DRIVER_NAME "\n"); |
| |
| rc = pci_register_driver(&cpqarray_pci_driver); |
| if (rc) |
| return rc; |
| cpqarray_eisa_detect(); |
| |
| for (i=0; i < MAX_CTLR; i++) { |
| if (hba[i] != NULL) |
| num_cntlrs_reg++; |
| } |
| |
| if (num_cntlrs_reg) |
| return 0; |
| else { |
| pci_unregister_driver(&cpqarray_pci_driver); |
| return -ENODEV; |
| } |
| } |
| |
| /* Function to find the first free pointer into our hba[] array */ |
| /* Returns -1 if no free entries are left. */ |
| static int alloc_cpqarray_hba(void) |
| { |
| int i; |
| |
| for(i=0; i< MAX_CTLR; i++) { |
| if (hba[i] == NULL) { |
| hba[i] = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL); |
| if(hba[i]==NULL) { |
| printk(KERN_ERR "cpqarray: out of memory.\n"); |
| return (-1); |
| } |
| return (i); |
| } |
| } |
| printk(KERN_WARNING "cpqarray: This driver supports a maximum" |
| " of 8 controllers.\n"); |
| return(-1); |
| } |
| |
| static void free_hba(int i) |
| { |
| kfree(hba[i]); |
| hba[i]=NULL; |
| } |
| |
| /* |
| * Find the IO address of the controller, its IRQ and so forth. Fill |
| * in some basic stuff into the ctlr_info_t structure. |
| */ |
| static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev) |
| { |
| ushort vendor_id, device_id, command; |
| unchar cache_line_size, latency_timer; |
| unchar irq, revision; |
| unsigned long addr[6]; |
| __u32 board_id; |
| |
| int i; |
| |
| c->pci_dev = pdev; |
| pci_set_master(pdev); |
| if (pci_enable_device(pdev)) { |
| printk(KERN_ERR "cpqarray: Unable to Enable PCI device\n"); |
| return -1; |
| } |
| vendor_id = pdev->vendor; |
| device_id = pdev->device; |
| irq = pdev->irq; |
| |
| for(i=0; i<6; i++) |
| addr[i] = pci_resource_start(pdev, i); |
| |
| if (pci_set_dma_mask(pdev, CPQARRAY_DMA_MASK) != 0) |
| { |
| printk(KERN_ERR "cpqarray: Unable to set DMA mask\n"); |
| return -1; |
| } |
| |
| pci_read_config_word(pdev, PCI_COMMAND, &command); |
| pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); |
| pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line_size); |
| pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_timer); |
| |
| pci_read_config_dword(pdev, 0x2c, &board_id); |
| |
| /* check to see if controller has been disabled */ |
| if(!(command & 0x02)) { |
| printk(KERN_WARNING |
| "cpqarray: controller appears to be disabled\n"); |
| return(-1); |
| } |
| |
| DBGINFO( |
| printk("vendor_id = %x\n", vendor_id); |
| printk("device_id = %x\n", device_id); |
| printk("command = %x\n", command); |
| for(i=0; i<6; i++) |
| printk("addr[%d] = %lx\n", i, addr[i]); |
| printk("revision = %x\n", revision); |
| printk("irq = %x\n", irq); |
| printk("cache_line_size = %x\n", cache_line_size); |
| printk("latency_timer = %x\n", latency_timer); |
| printk("board_id = %x\n", board_id); |
| ); |
| |
| c->intr = irq; |
| |
| for(i=0; i<6; i++) { |
| if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) |
| { /* IO space */ |
| c->io_mem_addr = addr[i]; |
| c->io_mem_length = pci_resource_end(pdev, i) |
| - pci_resource_start(pdev, i) + 1; |
| if(!request_region( c->io_mem_addr, c->io_mem_length, |
| "cpqarray")) |
| { |
| printk( KERN_WARNING "cpqarray I/O memory range already in use addr %lx length = %ld\n", c->io_mem_addr, c->io_mem_length); |
| c->io_mem_addr = 0; |
| c->io_mem_length = 0; |
| } |
| break; |
| } |
| } |
| |
| c->paddr = 0; |
| for(i=0; i<6; i++) |
| if (!(pci_resource_flags(pdev, i) & |
| PCI_BASE_ADDRESS_SPACE_IO)) { |
| c->paddr = pci_resource_start (pdev, i); |
| break; |
| } |
| if (!c->paddr) |
| return -1; |
| c->vaddr = remap_pci_mem(c->paddr, 128); |
| if (!c->vaddr) |
| return -1; |
| c->board_id = board_id; |
| |
| for(i=0; i<NR_PRODUCTS; i++) { |
| if (board_id == products[i].board_id) { |
| c->product_name = products[i].product_name; |
| c->access = *(products[i].access); |
| break; |
| } |
| } |
| if (i == NR_PRODUCTS) { |
| printk(KERN_WARNING "cpqarray: Sorry, I don't know how" |
| " to access the SMART Array controller %08lx\n", |
| (unsigned long)board_id); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Map (physical) PCI mem into (virtual) kernel space |
| */ |
| static void __iomem *remap_pci_mem(ulong base, ulong size) |
| { |
| ulong page_base = ((ulong) base) & PAGE_MASK; |
| ulong page_offs = ((ulong) base) - page_base; |
| void __iomem *page_remapped = ioremap(page_base, page_offs+size); |
| |
| return (page_remapped ? (page_remapped + page_offs) : NULL); |
| } |
| |
| #ifndef MODULE |
| /* |
| * Config string is a comma separated set of i/o addresses of EISA cards. |
| */ |
| static int cpqarray_setup(char *str) |
| { |
| int i, ints[9]; |
| |
| (void)get_options(str, ARRAY_SIZE(ints), ints); |
| |
| for(i=0; i<ints[0] && i<8; i++) |
| eisa[i] = ints[i+1]; |
| return 1; |
| } |
| |
| __setup("smart2=", cpqarray_setup); |
| |
| #endif |
| |
| /* |
| * Find an EISA controller's signature. Set up an hba if we find it. |
| */ |
| static int __init cpqarray_eisa_detect(void) |
| { |
| int i=0, j; |
| __u32 board_id; |
| int intr; |
| int ctlr; |
| int num_ctlr = 0; |
| |
| while(i<8 && eisa[i]) { |
| ctlr = alloc_cpqarray_hba(); |
| if(ctlr == -1) |
| break; |
| board_id = inl(eisa[i]+0xC80); |
| for(j=0; j < NR_PRODUCTS; j++) |
| if (board_id == products[j].board_id) |
| break; |
| |
| if (j == NR_PRODUCTS) { |
| printk(KERN_WARNING "cpqarray: Sorry, I don't know how" |
| " to access the SMART Array controller %08lx\n", (unsigned long)board_id); |
| continue; |
| } |
| |
| memset(hba[ctlr], 0, sizeof(ctlr_info_t)); |
| hba[ctlr]->io_mem_addr = eisa[i]; |
| hba[ctlr]->io_mem_length = 0x7FF; |
| if(!request_region(hba[ctlr]->io_mem_addr, |
| hba[ctlr]->io_mem_length, |
| "cpqarray")) |
| { |
| printk(KERN_WARNING "cpqarray: I/O range already in " |
| "use addr = %lx length = %ld\n", |
| hba[ctlr]->io_mem_addr, |
| hba[ctlr]->io_mem_length); |
| free_hba(ctlr); |
| continue; |
| } |
| |
| /* |
| * Read the config register to find our interrupt |
| */ |
| intr = inb(eisa[i]+0xCC0) >> 4; |
| if (intr & 1) intr = 11; |
| else if (intr & 2) intr = 10; |
| else if (intr & 4) intr = 14; |
| else if (intr & 8) intr = 15; |
| |
| hba[ctlr]->intr = intr; |
| sprintf(hba[ctlr]->devname, "ida%d", nr_ctlr); |
| hba[ctlr]->product_name = products[j].product_name; |
| hba[ctlr]->access = *(products[j].access); |
| hba[ctlr]->ctlr = ctlr; |
| hba[ctlr]->board_id = board_id; |
| hba[ctlr]->pci_dev = NULL; /* not PCI */ |
| |
| DBGINFO( |
| printk("i = %d, j = %d\n", i, j); |
| printk("irq = %x\n", intr); |
| printk("product name = %s\n", products[j].product_name); |
| printk("board_id = %x\n", board_id); |
| ); |
| |
| num_ctlr++; |
| i++; |
| |
| if (cpqarray_register_ctlr(ctlr, NULL) == -1) |
| printk(KERN_WARNING |
| "cpqarray: Can't register EISA controller %d\n", |
| ctlr); |
| |
| } |
| |
| return num_ctlr; |
| } |
| |
| /* |
| * Open. Make sure the device is really there. |
| */ |
| static int ida_open(struct block_device *bdev, fmode_t mode) |
| { |
| drv_info_t *drv = get_drv(bdev->bd_disk); |
| ctlr_info_t *host = get_host(bdev->bd_disk); |
| |
| DBGINFO(printk("ida_open %s\n", bdev->bd_disk->disk_name)); |
| /* |
| * Root is allowed to open raw volume zero even if it's not configured |
| * so array config can still work. I don't think I really like this, |
| * but I'm already using way to many device nodes to claim another one |
| * for "raw controller". |
| */ |
| if (!drv->nr_blks) { |
| if (!capable(CAP_SYS_RAWIO)) |
| return -ENXIO; |
| if (!capable(CAP_SYS_ADMIN) && drv != host->drv) |
| return -ENXIO; |
| } |
| host->usage_count++; |
| return 0; |
| } |
| |
| /* |
| * Close. Sync first. |
| */ |
| static int ida_release(struct gendisk *disk, fmode_t mode) |
| { |
| ctlr_info_t *host = get_host(disk); |
| host->usage_count--; |
| return 0; |
| } |
| |
| /* |
| * Enqueuing and dequeuing functions for cmdlists. |
| */ |
| static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c) |
| { |
| if (*Qptr == NULL) { |
| *Qptr = c; |
| c->next = c->prev = c; |
| } else { |
| c->prev = (*Qptr)->prev; |
| c->next = (*Qptr); |
| (*Qptr)->prev->next = c; |
| (*Qptr)->prev = c; |
| } |
| } |
| |
| static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c) |
| { |
| if (c && c->next != c) { |
| if (*Qptr == c) *Qptr = c->next; |
| c->prev->next = c->next; |
| c->next->prev = c->prev; |
| } else { |
| *Qptr = NULL; |
| } |
| return c; |
| } |
| |
| /* |
| * Get a request and submit it to the controller. |
| * This routine needs to grab all the requests it possibly can from the |
| * req Q and submit them. Interrupts are off (and need to be off) when you |
| * are in here (either via the dummy do_ida_request functions or by being |
| * called from the interrupt handler |
| */ |
| static void do_ida_request(struct request_queue *q) |
| { |
| ctlr_info_t *h = q->queuedata; |
| cmdlist_t *c; |
| struct request *creq; |
| struct scatterlist tmp_sg[SG_MAX]; |
| int i, dir, seg; |
| |
| if (blk_queue_plugged(q)) |
| goto startio; |
| |
| queue_next: |
| creq = elv_next_request(q); |
| if (!creq) |
| goto startio; |
| |
| BUG_ON(creq->nr_phys_segments > SG_MAX); |
| |
| if ((c = cmd_alloc(h,1)) == NULL) |
| goto startio; |
| |
| blkdev_dequeue_request(creq); |
| |
| c->ctlr = h->ctlr; |
| c->hdr.unit = (drv_info_t *)(creq->rq_disk->private_data) - h->drv; |
| c->hdr.size = sizeof(rblk_t) >> 2; |
| c->size += sizeof(rblk_t); |
| |
| c->req.hdr.blk = blk_rq_pos(creq); |
| c->rq = creq; |
| DBGPX( |
| printk("sector=%d, nr_sectors=%u\n", |
| blk_rq_pos(creq), blk_rq_sectors(creq)); |
| ); |
| sg_init_table(tmp_sg, SG_MAX); |
| seg = blk_rq_map_sg(q, creq, tmp_sg); |
| |
| /* Now do all the DMA Mappings */ |
| if (rq_data_dir(creq) == READ) |
| dir = PCI_DMA_FROMDEVICE; |
| else |
| dir = PCI_DMA_TODEVICE; |
| for( i=0; i < seg; i++) |
| { |
| c->req.sg[i].size = tmp_sg[i].length; |
| c->req.sg[i].addr = (__u32) pci_map_page(h->pci_dev, |
| sg_page(&tmp_sg[i]), |
| tmp_sg[i].offset, |
| tmp_sg[i].length, dir); |
| } |
| DBGPX( printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); ); |
| c->req.hdr.sg_cnt = seg; |
| c->req.hdr.blk_cnt = blk_rq_sectors(creq); |
| c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE; |
| c->type = CMD_RWREQ; |
| |
| /* Put the request on the tail of the request queue */ |
| addQ(&h->reqQ, c); |
| h->Qdepth++; |
| if (h->Qdepth > h->maxQsinceinit) |
| h->maxQsinceinit = h->Qdepth; |
| |
| goto queue_next; |
| |
| startio: |
| start_io(h); |
| } |
| |
| /* |
| * start_io submits everything on a controller's request queue |
| * and moves it to the completion queue. |
| * |
| * Interrupts had better be off if you're in here |
| */ |
| static void start_io(ctlr_info_t *h) |
| { |
| cmdlist_t *c; |
| |
| while((c = h->reqQ) != NULL) { |
| /* Can't do anything if we're busy */ |
| if (h->access.fifo_full(h) == 0) |
| return; |
| |
| /* Get the first entry from the request Q */ |
| removeQ(&h->reqQ, c); |
| h->Qdepth--; |
| |
| /* Tell the controller to do our bidding */ |
| h->access.submit_command(h, c); |
| |
| /* Get onto the completion Q */ |
| addQ(&h->cmpQ, c); |
| } |
| } |
| |
| /* |
| * Mark all buffers that cmd was responsible for |
| */ |
| static inline void complete_command(cmdlist_t *cmd, int timeout) |
| { |
| struct request *rq = cmd->rq; |
| int error = 0; |
| int i, ddir; |
| |
| if (cmd->req.hdr.rcode & RCODE_NONFATAL && |
| (hba[cmd->ctlr]->misc_tflags & MISC_NONFATAL_WARN) == 0) { |
| printk(KERN_NOTICE "Non Fatal error on ida/c%dd%d\n", |
| cmd->ctlr, cmd->hdr.unit); |
| hba[cmd->ctlr]->misc_tflags |= MISC_NONFATAL_WARN; |
| } |
| if (cmd->req.hdr.rcode & RCODE_FATAL) { |
| printk(KERN_WARNING "Fatal error on ida/c%dd%d\n", |
| cmd->ctlr, cmd->hdr.unit); |
| error = -EIO; |
| } |
| if (cmd->req.hdr.rcode & RCODE_INVREQ) { |
| printk(KERN_WARNING "Invalid request on ida/c%dd%d = (cmd=%x sect=%d cnt=%d sg=%d ret=%x)\n", |
| cmd->ctlr, cmd->hdr.unit, cmd->req.hdr.cmd, |
| cmd->req.hdr.blk, cmd->req.hdr.blk_cnt, |
| cmd->req.hdr.sg_cnt, cmd->req.hdr.rcode); |
| error = -EIO; |
| } |
| if (timeout) |
| error = -EIO; |
| /* unmap the DMA mapping for all the scatter gather elements */ |
| if (cmd->req.hdr.cmd == IDA_READ) |
| ddir = PCI_DMA_FROMDEVICE; |
| else |
| ddir = PCI_DMA_TODEVICE; |
| for(i=0; i<cmd->req.hdr.sg_cnt; i++) |
| pci_unmap_page(hba[cmd->ctlr]->pci_dev, cmd->req.sg[i].addr, |
| cmd->req.sg[i].size, ddir); |
| |
| DBGPX(printk("Done with %p\n", rq);); |
| __blk_end_request_all(rq, error); |
| } |
| |
| /* |
| * The controller will interrupt us upon completion of commands. |
| * Find the command on the completion queue, remove it, tell the OS and |
| * try to queue up more IO |
| */ |
| static irqreturn_t do_ida_intr(int irq, void *dev_id) |
| { |
| ctlr_info_t *h = dev_id; |
| cmdlist_t *c; |
| unsigned long istat; |
| unsigned long flags; |
| __u32 a,a1; |
| |
| istat = h->access.intr_pending(h); |
| /* Is this interrupt for us? */ |
| if (istat == 0) |
| return IRQ_NONE; |
| |
| /* |
| * If there are completed commands in the completion queue, |
| * we had better do something about it. |
| */ |
| spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); |
| if (istat & FIFO_NOT_EMPTY) { |
| while((a = h->access.command_completed(h))) { |
| a1 = a; a &= ~3; |
| if ((c = h->cmpQ) == NULL) |
| { |
| printk(KERN_WARNING "cpqarray: Completion of %08lx ignored\n", (unsigned long)a1); |
| continue; |
| } |
| while(c->busaddr != a) { |
| c = c->next; |
| if (c == h->cmpQ) |
| break; |
| } |
| /* |
| * If we've found the command, take it off the |
| * completion Q and free it |
| */ |
| if (c->busaddr == a) { |
| removeQ(&h->cmpQ, c); |
| /* Check for invalid command. |
| * Controller returns command error, |
| * But rcode = 0. |
| */ |
| |
| if((a1 & 0x03) && (c->req.hdr.rcode == 0)) |
| { |
| c->req.hdr.rcode = RCODE_INVREQ; |
| } |
| if (c->type == CMD_RWREQ) { |
| complete_command(c, 0); |
| cmd_free(h, c, 1); |
| } else if (c->type == CMD_IOCTL_PEND) { |
| c->type = CMD_IOCTL_DONE; |
| } |
| continue; |
| } |
| } |
| } |
| |
| /* |
| * See if we can queue up some more IO |
| */ |
| do_ida_request(h->queue); |
| spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * This timer was for timing out requests that haven't happened after |
| * IDA_TIMEOUT. That wasn't such a good idea. This timer is used to |
| * reset a flags structure so we don't flood the user with |
| * "Non-Fatal error" messages. |
| */ |
| static void ida_timer(unsigned long tdata) |
| { |
| ctlr_info_t *h = (ctlr_info_t*)tdata; |
| |
| h->timer.expires = jiffies + IDA_TIMER; |
| add_timer(&h->timer); |
| h->misc_tflags = 0; |
| } |
| |
| static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| { |
| drv_info_t *drv = get_drv(bdev->bd_disk); |
| |
| if (drv->cylinders) { |
| geo->heads = drv->heads; |
| geo->sectors = drv->sectors; |
| geo->cylinders = drv->cylinders; |
| } else { |
| geo->heads = 0xff; |
| geo->sectors = 0x3f; |
| geo->cylinders = drv->nr_blks / (0xff*0x3f); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * ida_ioctl does some miscellaneous stuff like reporting drive geometry, |
| * setting readahead and submitting commands from userspace to the controller. |
| */ |
| static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) |
| { |
| drv_info_t *drv = get_drv(bdev->bd_disk); |
| ctlr_info_t *host = get_host(bdev->bd_disk); |
| int error; |
| ida_ioctl_t __user *io = (ida_ioctl_t __user *)arg; |
| ida_ioctl_t *my_io; |
| |
| switch(cmd) { |
| case IDAGETDRVINFO: |
| if (copy_to_user(&io->c.drv, drv, sizeof(drv_info_t))) |
| return -EFAULT; |
| return 0; |
| case IDAPASSTHRU: |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| my_io = kmalloc(sizeof(ida_ioctl_t), GFP_KERNEL); |
| if (!my_io) |
| return -ENOMEM; |
| error = -EFAULT; |
| if (copy_from_user(my_io, io, sizeof(*my_io))) |
| goto out_passthru; |
| error = ida_ctlr_ioctl(host, drv - host->drv, my_io); |
| if (error) |
| goto out_passthru; |
| error = -EFAULT; |
| if (copy_to_user(io, my_io, sizeof(*my_io))) |
| goto out_passthru; |
| error = 0; |
| out_passthru: |
| kfree(my_io); |
| return error; |
| case IDAGETCTLRSIG: |
| if (!arg) return -EINVAL; |
| put_user(host->ctlr_sig, (int __user *)arg); |
| return 0; |
| case IDAREVALIDATEVOLS: |
| if (MINOR(bdev->bd_dev) != 0) |
| return -ENXIO; |
| return revalidate_allvol(host); |
| case IDADRIVERVERSION: |
| if (!arg) return -EINVAL; |
| put_user(DRIVER_VERSION, (unsigned long __user *)arg); |
| return 0; |
| case IDAGETPCIINFO: |
| { |
| |
| ida_pci_info_struct pciinfo; |
| |
| if (!arg) return -EINVAL; |
| pciinfo.bus = host->pci_dev->bus->number; |
| pciinfo.dev_fn = host->pci_dev->devfn; |
| pciinfo.board_id = host->board_id; |
| if(copy_to_user((void __user *) arg, &pciinfo, |
| sizeof( ida_pci_info_struct))) |
| return -EFAULT; |
| return(0); |
| } |
| |
| default: |
| return -EINVAL; |
| } |
| |
| } |
| /* |
| * ida_ctlr_ioctl is for passing commands to the controller from userspace. |
| * The command block (io) has already been copied to kernel space for us, |
| * however, any elements in the sglist need to be copied to kernel space |
| * or copied back to userspace. |
| * |
| * Only root may perform a controller passthru command, however I'm not doing |
| * any serious sanity checking on the arguments. Doing an IDA_WRITE_MEDIA and |
| * putting a 64M buffer in the sglist is probably a *bad* idea. |
| */ |
| static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io) |
| { |
| int ctlr = h->ctlr; |
| cmdlist_t *c; |
| void *p = NULL; |
| unsigned long flags; |
| int error; |
| |
| if ((c = cmd_alloc(h, 0)) == NULL) |
| return -ENOMEM; |
| c->ctlr = ctlr; |
| c->hdr.unit = (io->unit & UNITVALID) ? (io->unit & ~UNITVALID) : dsk; |
| c->hdr.size = sizeof(rblk_t) >> 2; |
| c->size += sizeof(rblk_t); |
| |
| c->req.hdr.cmd = io->cmd; |
| c->req.hdr.blk = io->blk; |
| c->req.hdr.blk_cnt = io->blk_cnt; |
| c->type = CMD_IOCTL_PEND; |
| |
| /* Pre submit processing */ |
| switch(io->cmd) { |
| case PASSTHRU_A: |
| p = kmalloc(io->sg[0].size, GFP_KERNEL); |
| if (!p) |
| { |
| error = -ENOMEM; |
| cmd_free(h, c, 0); |
| return(error); |
| } |
| if (copy_from_user(p, io->sg[0].addr, io->sg[0].size)) { |
| kfree(p); |
| cmd_free(h, c, 0); |
| return -EFAULT; |
| } |
| c->req.hdr.blk = pci_map_single(h->pci_dev, &(io->c), |
| sizeof(ida_ioctl_t), |
| PCI_DMA_BIDIRECTIONAL); |
| c->req.sg[0].size = io->sg[0].size; |
| c->req.sg[0].addr = pci_map_single(h->pci_dev, p, |
| c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); |
| c->req.hdr.sg_cnt = 1; |
| break; |
| case IDA_READ: |
| case READ_FLASH_ROM: |
| case SENSE_CONTROLLER_PERFORMANCE: |
| p = kmalloc(io->sg[0].size, GFP_KERNEL); |
| if (!p) |
| { |
| error = -ENOMEM; |
| cmd_free(h, c, 0); |
| return(error); |
| } |
| |
| c->req.sg[0].size = io->sg[0].size; |
| c->req.sg[0].addr = pci_map_single(h->pci_dev, p, |
| c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); |
| c->req.hdr.sg_cnt = 1; |
| break; |
| case IDA_WRITE: |
| case IDA_WRITE_MEDIA: |
| case DIAG_PASS_THRU: |
| case COLLECT_BUFFER: |
| case WRITE_FLASH_ROM: |
| p = kmalloc(io->sg[0].size, GFP_KERNEL); |
| if (!p) |
| { |
| error = -ENOMEM; |
| cmd_free(h, c, 0); |
| return(error); |
| } |
| if (copy_from_user(p, io->sg[0].addr, io->sg[0].size)) { |
| kfree(p); |
| cmd_free(h, c, 0); |
| return -EFAULT; |
| } |
| c->req.sg[0].size = io->sg[0].size; |
| c->req.sg[0].addr = pci_map_single(h->pci_dev, p, |
| c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); |
| c->req.hdr.sg_cnt = 1; |
| break; |
| default: |
| c->req.sg[0].size = sizeof(io->c); |
| c->req.sg[0].addr = pci_map_single(h->pci_dev,&io->c, |
| c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); |
| c->req.hdr.sg_cnt = 1; |
| } |
| |
| /* Put the request on the tail of the request queue */ |
| spin_lock_irqsave(IDA_LOCK(ctlr), flags); |
| addQ(&h->reqQ, c); |
| h->Qdepth++; |
| start_io(h); |
| spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); |
| |
| /* Wait for completion */ |
| while(c->type != CMD_IOCTL_DONE) |
| schedule(); |
| |
| /* Unmap the DMA */ |
| pci_unmap_single(h->pci_dev, c->req.sg[0].addr, c->req.sg[0].size, |
| PCI_DMA_BIDIRECTIONAL); |
| /* Post submit processing */ |
| switch(io->cmd) { |
| case PASSTHRU_A: |
| pci_unmap_single(h->pci_dev, c->req.hdr.blk, |
| sizeof(ida_ioctl_t), |
| PCI_DMA_BIDIRECTIONAL); |
| case IDA_READ: |
| case DIAG_PASS_THRU: |
| case SENSE_CONTROLLER_PERFORMANCE: |
| case READ_FLASH_ROM: |
| if (copy_to_user(io->sg[0].addr, p, io->sg[0].size)) { |
| kfree(p); |
| return -EFAULT; |
| } |
| /* fall through and free p */ |
| case IDA_WRITE: |
| case IDA_WRITE_MEDIA: |
| case COLLECT_BUFFER: |
| case WRITE_FLASH_ROM: |
| kfree(p); |
| break; |
| default:; |
| /* Nothing to do */ |
| } |
| |
| io->rcode = c->req.hdr.rcode; |
| cmd_free(h, c, 0); |
| return(0); |
| } |
| |
| /* |
| * Commands are pre-allocated in a large block. Here we use a simple bitmap |
| * scheme to suballocte them to the driver. Operations that are not time |
| * critical (and can wait for kmalloc and possibly sleep) can pass in NULL |
| * as the first argument to get a new command. |
| */ |
| static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool) |
| { |
| cmdlist_t * c; |
| int i; |
| dma_addr_t cmd_dhandle; |
| |
| if (!get_from_pool) { |
| c = (cmdlist_t*)pci_alloc_consistent(h->pci_dev, |
| sizeof(cmdlist_t), &cmd_dhandle); |
| if(c==NULL) |
| return NULL; |
| } else { |
| do { |
| i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS); |
| if (i == NR_CMDS) |
| return NULL; |
| } while(test_and_set_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG)) != 0); |
| c = h->cmd_pool + i; |
| cmd_dhandle = h->cmd_pool_dhandle + i*sizeof(cmdlist_t); |
| h->nr_allocs++; |
| } |
| |
| memset(c, 0, sizeof(cmdlist_t)); |
| c->busaddr = cmd_dhandle; |
| return c; |
| } |
| |
| static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool) |
| { |
| int i; |
| |
| if (!got_from_pool) { |
| pci_free_consistent(h->pci_dev, sizeof(cmdlist_t), c, |
| c->busaddr); |
| } else { |
| i = c - h->cmd_pool; |
| clear_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG)); |
| h->nr_frees++; |
| } |
| } |
| |
| /*********************************************************************** |
| name: sendcmd |
| Send a command to an IDA using the memory mapped FIFO interface |
| and wait for it to complete. |
| This routine should only be called at init time. |
| ***********************************************************************/ |
| static int sendcmd( |
| __u8 cmd, |
| int ctlr, |
| void *buff, |
| size_t size, |
| unsigned int blk, |
| unsigned int blkcnt, |
| unsigned int log_unit ) |
| { |
| cmdlist_t *c; |
| int complete; |
| unsigned long temp; |
| unsigned long i; |
| ctlr_info_t *info_p = hba[ctlr]; |
| |
| c = cmd_alloc(info_p, 1); |
| if(!c) |
| return IO_ERROR; |
| c->ctlr = ctlr; |
| c->hdr.unit = log_unit; |
| c->hdr.prio = 0; |
| c->hdr.size = sizeof(rblk_t) >> 2; |
| c->size += sizeof(rblk_t); |
| |
| /* The request information. */ |
| c->req.hdr.next = 0; |
| c->req.hdr.rcode = 0; |
| c->req.bp = 0; |
| c->req.hdr.sg_cnt = 1; |
| c->req.hdr.reserved = 0; |
| |
| if (size == 0) |
| c->req.sg[0].size = 512; |
| else |
| c->req.sg[0].size = size; |
| |
| c->req.hdr.blk = blk; |
| c->req.hdr.blk_cnt = blkcnt; |
| c->req.hdr.cmd = (unsigned char) cmd; |
| c->req.sg[0].addr = (__u32) pci_map_single(info_p->pci_dev, |
| buff, c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); |
| /* |
| * Disable interrupt |
| */ |
| info_p->access.set_intr_mask(info_p, 0); |
| /* Make sure there is room in the command FIFO */ |
| /* Actually it should be completely empty at this time. */ |
| for (i = 200000; i > 0; i--) { |
| temp = info_p->access.fifo_full(info_p); |
| if (temp != 0) { |
| break; |
| } |
| udelay(10); |
| DBG( |
| printk(KERN_WARNING "cpqarray ida%d: idaSendPciCmd FIFO full," |
| " waiting!\n", ctlr); |
| ); |
| } |
| /* |
| * Send the cmd |
| */ |
| info_p->access.submit_command(info_p, c); |
| complete = pollcomplete(ctlr); |
| |
| pci_unmap_single(info_p->pci_dev, (dma_addr_t) c->req.sg[0].addr, |
| c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); |
| if (complete != 1) { |
| if (complete != c->busaddr) { |
| printk( KERN_WARNING |
| "cpqarray ida%d: idaSendPciCmd " |
| "Invalid command list address returned! (%08lx)\n", |
| ctlr, (unsigned long)complete); |
| cmd_free(info_p, c, 1); |
| return (IO_ERROR); |
| } |
| } else { |
| printk( KERN_WARNING |
| "cpqarray ida%d: idaSendPciCmd Timeout out, " |
| "No command list address returned!\n", |
| ctlr); |
| cmd_free(info_p, c, 1); |
| return (IO_ERROR); |
| } |
| |
| if (c->req.hdr.rcode & 0x00FE) { |
| if (!(c->req.hdr.rcode & BIG_PROBLEM)) { |
| printk( KERN_WARNING |
| "cpqarray ida%d: idaSendPciCmd, error: " |
| "Controller failed at init time " |
| "cmd: 0x%x, return code = 0x%x\n", |
| ctlr, c->req.hdr.cmd, c->req.hdr.rcode); |
| |
| cmd_free(info_p, c, 1); |
| return (IO_ERROR); |
| } |
| } |
| cmd_free(info_p, c, 1); |
| return (IO_OK); |
| } |
| |
| /* |
| * revalidate_allvol is for online array config utilities. After a |
| * utility reconfigures the drives in the array, it can use this function |
| * (through an ioctl) to make the driver zap any previous disk structs for |
| * that controller and get new ones. |
| * |
| * Right now I'm using the getgeometry() function to do this, but this |
| * function should probably be finer grained and allow you to revalidate one |
| * particualar logical volume (instead of all of them on a particular |
| * controller). |
| */ |
| static int revalidate_allvol(ctlr_info_t *host) |
| { |
| int ctlr = host->ctlr; |
| int i; |
| unsigned long flags; |
| |
| spin_lock_irqsave(IDA_LOCK(ctlr), flags); |
| if (host->usage_count > 1) { |
| spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); |
| printk(KERN_WARNING "cpqarray: Device busy for volume" |
| " revalidation (usage=%d)\n", host->usage_count); |
| return -EBUSY; |
| } |
| host->usage_count++; |
| spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); |
| |
| /* |
| * Set the partition and block size structures for all volumes |
| * on this controller to zero. We will reread all of this data |
| */ |
| set_capacity(ida_gendisk[ctlr][0], 0); |
| for (i = 1; i < NWD; i++) { |
| struct gendisk *disk = ida_gendisk[ctlr][i]; |
| if (disk->flags & GENHD_FL_UP) |
| del_gendisk(disk); |
| } |
| memset(host->drv, 0, sizeof(drv_info_t)*NWD); |
| |
| /* |
| * Tell the array controller not to give us any interrupts while |
| * we check the new geometry. Then turn interrupts back on when |
| * we're done. |
| */ |
| host->access.set_intr_mask(host, 0); |
| getgeometry(ctlr); |
| host->access.set_intr_mask(host, FIFO_NOT_EMPTY); |
| |
| for(i=0; i<NWD; i++) { |
| struct gendisk *disk = ida_gendisk[ctlr][i]; |
| drv_info_t *drv = &host->drv[i]; |
| if (i && !drv->nr_blks) |
| continue; |
| blk_queue_hardsect_size(host->queue, drv->blk_size); |
| set_capacity(disk, drv->nr_blks); |
| disk->queue = host->queue; |
| disk->private_data = drv; |
| if (i) |
| add_disk(disk); |
| } |
| |
| host->usage_count--; |
| return 0; |
| } |
| |
| static int ida_revalidate(struct gendisk *disk) |
| { |
| drv_info_t *drv = disk->private_data; |
| set_capacity(disk, drv->nr_blks); |
| return 0; |
| } |
| |
| /******************************************************************** |
| name: pollcomplete |
| Wait polling for a command to complete. |
| The memory mapped FIFO is polled for the completion. |
| Used only at init time, interrupts disabled. |
| ********************************************************************/ |
| static int pollcomplete(int ctlr) |
| { |
| int done; |
| int i; |
| |
| /* Wait (up to 2 seconds) for a command to complete */ |
| |
| for (i = 200000; i > 0; i--) { |
| done = hba[ctlr]->access.command_completed(hba[ctlr]); |
| if (done == 0) { |
| udelay(10); /* a short fixed delay */ |
| } else |
| return (done); |
| } |
| /* Invalid address to tell caller we ran out of time */ |
| return 1; |
| } |
| /***************************************************************** |
| start_fwbk |
| Starts controller firmwares background processing. |
| Currently only the Integrated Raid controller needs this done. |
| If the PCI mem address registers are written to after this, |
| data corruption may occur |
| *****************************************************************/ |
| static void start_fwbk(int ctlr) |
| { |
| id_ctlr_t *id_ctlr_buf; |
| int ret_code; |
| |
| if( (hba[ctlr]->board_id != 0x40400E11) |
| && (hba[ctlr]->board_id != 0x40480E11) ) |
| |
| /* Not a Integrated Raid, so there is nothing for us to do */ |
| return; |
| printk(KERN_DEBUG "cpqarray: Starting firmware's background" |
| " processing\n"); |
| /* Command does not return anything, but idasend command needs a |
| buffer */ |
| id_ctlr_buf = kmalloc(sizeof(id_ctlr_t), GFP_KERNEL); |
| if(id_ctlr_buf==NULL) |
| { |
| printk(KERN_WARNING "cpqarray: Out of memory. " |
| "Unable to start background processing.\n"); |
| return; |
| } |
| ret_code = sendcmd(RESUME_BACKGROUND_ACTIVITY, ctlr, |
| id_ctlr_buf, 0, 0, 0, 0); |
| if(ret_code != IO_OK) |
| printk(KERN_WARNING "cpqarray: Unable to start" |
| " background processing\n"); |
| |
| kfree(id_ctlr_buf); |
| } |
| /***************************************************************** |
| getgeometry |
| Get ida logical volume geometry from the controller |
| This is a large bit of code which once existed in two flavors, |
| It is used only at init time. |
| *****************************************************************/ |
| static void getgeometry(int ctlr) |
| { |
| id_log_drv_t *id_ldrive; |
| id_ctlr_t *id_ctlr_buf; |
| sense_log_drv_stat_t *id_lstatus_buf; |
| config_t *sense_config_buf; |
| unsigned int log_unit, log_index; |
| int ret_code, size; |
| drv_info_t *drv; |
| ctlr_info_t *info_p = hba[ctlr]; |
| int i; |
| |
| info_p->log_drv_map = 0; |
| |
| id_ldrive = kzalloc(sizeof(id_log_drv_t), GFP_KERNEL); |
| if (!id_ldrive) { |
| printk( KERN_ERR "cpqarray: out of memory.\n"); |
| goto err_0; |
| } |
| |
| id_ctlr_buf = kzalloc(sizeof(id_ctlr_t), GFP_KERNEL); |
| if (!id_ctlr_buf) { |
| printk( KERN_ERR "cpqarray: out of memory.\n"); |
| goto err_1; |
| } |
| |
| id_lstatus_buf = kzalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL); |
| if (!id_lstatus_buf) { |
| printk( KERN_ERR "cpqarray: out of memory.\n"); |
| goto err_2; |
| } |
| |
| sense_config_buf = kzalloc(sizeof(config_t), GFP_KERNEL); |
| if (!sense_config_buf) { |
| printk( KERN_ERR "cpqarray: out of memory.\n"); |
| goto err_3; |
| } |
| |
| info_p->phys_drives = 0; |
| info_p->log_drv_map = 0; |
| info_p->drv_assign_map = 0; |
| info_p->drv_spare_map = 0; |
| info_p->mp_failed_drv_map = 0; /* only initialized here */ |
| /* Get controllers info for this logical drive */ |
| ret_code = sendcmd(ID_CTLR, ctlr, id_ctlr_buf, 0, 0, 0, 0); |
| if (ret_code == IO_ERROR) { |
| /* |
| * If can't get controller info, set the logical drive map to 0, |
| * so the idastubopen will fail on all logical drives |
| * on the controller. |
| */ |
| printk(KERN_ERR "cpqarray: error sending ID controller\n"); |
| goto err_4; |
| } |
| |
| info_p->log_drives = id_ctlr_buf->nr_drvs; |
| for(i=0;i<4;i++) |
| info_p->firm_rev[i] = id_ctlr_buf->firm_rev[i]; |
| info_p->ctlr_sig = id_ctlr_buf->cfg_sig; |
| |
| printk(" (%s)\n", info_p->product_name); |
| /* |
| * Initialize logical drive map to zero |
| */ |
| log_index = 0; |
| /* |
| * Get drive geometry for all logical drives |
| */ |
| if (id_ctlr_buf->nr_drvs > 16) |
| printk(KERN_WARNING "cpqarray ida%d: This driver supports " |
| "16 logical drives per controller.\n. " |
| " Additional drives will not be " |
| "detected\n", ctlr); |
| |
| for (log_unit = 0; |
| (log_index < id_ctlr_buf->nr_drvs) |
| && (log_unit < NWD); |
| log_unit++) { |
| size = sizeof(sense_log_drv_stat_t); |
| |
| /* |
| Send "Identify logical drive status" cmd |
| */ |
| ret_code = sendcmd(SENSE_LOG_DRV_STAT, |
| ctlr, id_lstatus_buf, size, 0, 0, log_unit); |
| if (ret_code == IO_ERROR) { |
| /* |
| If can't get logical drive status, set |
| the logical drive map to 0, so the |
| idastubopen will fail for all logical drives |
| on the controller. |
| */ |
| info_p->log_drv_map = 0; |
| printk( KERN_WARNING |
| "cpqarray ida%d: idaGetGeometry - Controller" |
| " failed to report status of logical drive %d\n" |
| "Access to this controller has been disabled\n", |
| ctlr, log_unit); |
| goto err_4; |
| } |
| /* |
| Make sure the logical drive is configured |
| */ |
| if (id_lstatus_buf->status != LOG_NOT_CONF) { |
| ret_code = sendcmd(ID_LOG_DRV, ctlr, id_ldrive, |
| sizeof(id_log_drv_t), 0, 0, log_unit); |
| /* |
| If error, the bit for this |
| logical drive won't be set and |
| idastubopen will return error. |
| */ |
| if (ret_code != IO_ERROR) { |
| drv = &info_p->drv[log_unit]; |
| drv->blk_size = id_ldrive->blk_size; |
| drv->nr_blks = id_ldrive->nr_blks; |
| drv->cylinders = id_ldrive->drv.cyl; |
| drv->heads = id_ldrive->drv.heads; |
| drv->sectors = id_ldrive->drv.sect_per_track; |
| info_p->log_drv_map |= (1 << log_unit); |
| |
| printk(KERN_INFO "cpqarray ida/c%dd%d: blksz=%d nr_blks=%d\n", |
| ctlr, log_unit, drv->blk_size, drv->nr_blks); |
| ret_code = sendcmd(SENSE_CONFIG, |
| ctlr, sense_config_buf, |
| sizeof(config_t), 0, 0, log_unit); |
| if (ret_code == IO_ERROR) { |
| info_p->log_drv_map = 0; |
| printk(KERN_ERR "cpqarray: error sending sense config\n"); |
| goto err_4; |
| } |
| |
| info_p->phys_drives = |
| sense_config_buf->ctlr_phys_drv; |
| info_p->drv_assign_map |
| |= sense_config_buf->drv_asgn_map; |
| info_p->drv_assign_map |
| |= sense_config_buf->spare_asgn_map; |
| info_p->drv_spare_map |
| |= sense_config_buf->spare_asgn_map; |
| } /* end of if no error on id_ldrive */ |
| log_index = log_index + 1; |
| } /* end of if logical drive configured */ |
| } /* end of for log_unit */ |
| |
| /* Free all the buffers and return */ |
| err_4: |
| kfree(sense_config_buf); |
| err_3: |
| kfree(id_lstatus_buf); |
| err_2: |
| kfree(id_ctlr_buf); |
| err_1: |
| kfree(id_ldrive); |
| err_0: |
| return; |
| } |
| |
| static void __exit cpqarray_exit(void) |
| { |
| int i; |
| |
| pci_unregister_driver(&cpqarray_pci_driver); |
| |
| /* Double check that all controller entries have been removed */ |
| for(i=0; i<MAX_CTLR; i++) { |
| if (hba[i] != NULL) { |
| printk(KERN_WARNING "cpqarray: Removing EISA " |
| "controller %d\n", i); |
| cpqarray_remove_one_eisa(i); |
| } |
| } |
| |
| remove_proc_entry("driver/cpqarray", NULL); |
| } |
| |
| module_init(cpqarray_init) |
| module_exit(cpqarray_exit) |