powerpc/83xx: new board support: MPC8360E-RDK
This is patch adds board file, device tree, and defconfig for the new
board, made by Freescale Semiconductor Inc. and Logic Product Development.
Currently supported:
1. UEC{1,2,7,4};
2. I2C;
3. SPI;
4. NS16550 serial;
5. PCI and miniPCI;
6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85;
7. Graphics controller, Fujitsu MB86277.
Not supported in this patch:
1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver);
2. FHCI USB (supported with FHCI driver).
3. QE Serial UCCs (tested to not work with ucc_uart driver, reason
unknown, yet);
4. ADC AD7843 (tested to work, but support via device tree depends on
major SPI rework, GPIO API, etc);
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 0000000..3402d26
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,397 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360rdk";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8360@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ /* filled by u-boot */
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ /* filled by u-boot */
+ reg = <0 0>;
+ };
+
+ soc@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+ "simple-bus";
+ ranges = <0 0xe0000000 0x200000>;
+ reg = <0xe0000000 0x200>;
+ /* filled by u-boot */
+ bus-frequency = <0>;
+
+ wdt@200 {
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <16 8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ interrupts = <9 8>;
+ interrupt-parent = <&ipic>;
+ /* filled by u-boot */
+ clock-frequency = <0>;
+ };
+
+ serial1: serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ interrupts = <10 8>;
+ interrupt-parent = <&ipic>;
+ /* filled by u-boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec2-crypto";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 8>;
+ interrupt-parent = <&ipic>;
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x7e>;
+ /*
+ * desc mask is for rev1.x, we need runtime fixup
+ * for >=2.x
+ */
+ descriptor-types-mask = <0x1010ebf>;
+ };
+
+ ipic: interrupt-controller@700 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "fsl,pq2pro-pic", "fsl,ipic";
+ interrupt-controller;
+ reg = <0x700 0x100>;
+ };
+
+ qe_pio_b: gpio-controller@1418 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1418 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
+
+ qe@100000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe", "simple-bus";
+ ranges = <0 0x100000 0x100000>;
+ reg = <0x100000 0x480>;
+ /* filled by u-boot */
+ clock-frequency = <0>;
+ bus-frequency = <0>;
+ brg-frequency = <0>;
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0 0x10000 0xc000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0 0xc000>;
+ };
+ };
+
+ timer@440 {
+ compatible = "fsl,mpc8360-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ /* filled by u-boot */
+ clock-frequency = <0>;
+ };
+
+ spi@4c0 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x4c0 0x40>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu-qe";
+ };
+
+ spi@500 {
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu-qe";
+ };
+
+ enet0: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ rx-clock-name = "none";
+ tx-clock-name = "clk9";
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-rxid";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ enet1: ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ rx-clock-name = "none";
+ tx-clock-name = "clk4";
+ phy-handle = <&phy4>;
+ phy-connection-type = "rgmii-rxid";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ enet2: ucc@2600 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <7>;
+ reg = <0x2600 0x200>;
+ interrupts = <42>;
+ interrupt-parent = <&qeic>;
+ rx-clock-name = "clk20";
+ tx-clock-name = "clk19";
+ phy-handle = <&phy1>;
+ phy-connection-type = "mii";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ enet3: ucc@3200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk7";
+ phy-handle = <&phy3>;
+ phy-connection-type = "mii";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,ucc-mdio";
+ reg = <0x2120 0x18>;
+
+ phy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "national,DP83848VV";
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,BCM5481UA2KMLG";
+ reg = <2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ device_type = "ethernet-phy";
+ compatible = "national,DP83848VV";
+ reg = <3>;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,BCM5481UA2KMLG";
+ reg = <4>;
+ };
+ };
+
+ serial2: ucc@2400 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ reg = <0x2400 0x200>;
+ cell-index = <5>;
+ port-number = <0>;
+ rx-clock-name = "brg7";
+ tx-clock-name = "brg8";
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ soft-uart;
+ };
+
+ serial3: ucc@3400 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ reg = <0x3400 0x200>;
+ cell-index = <6>;
+ port-number = <1>;
+ rx-clock-name = "brg13";
+ tx-clock-name = "brg14";
+ interrupts = <41>;
+ interrupt-parent = <&qeic>;
+ soft-uart;
+ };
+
+ qeic: interrupt-controller@80 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ compatible = "fsl,qe-ic";
+ interrupt-controller;
+ reg = <0x80 0x80>;
+ big-endian;
+ interrupts = <32 8 33 8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+ "simple-bus";
+ reg = <0xe0005000 0xd8>;
+ ranges = <0 0 0xff800000 0x0800000
+ 1 0 0x60000000 0x0001000
+ 2 0 0x70000000 0x4000000>;
+
+ flash@0,0 {
+ compatible = "intel,PC28F640P30T85", "cfi-flash";
+ reg = <0 0 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ display@2,0 {
+ device_type = "display";
+ compatible = "fujitsu,MB86277", "fujitsu,mint";
+ reg = <2 0 0x4000000>;
+ fujitsu,sh3;
+ little-endian;
+ /* filled by u-boot */
+ address = <0>;
+ depth = <0>;
+ width = <0>;
+ height = <0>;
+ linebytes = <0>;
+ /* linux,opened; - added by uboot */
+ };
+ };
+
+ pci0: pci@e0008500 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+ reg = <0xe0008500 0x100>;
+ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+ interrupts = <66 8>;
+ interrupt-parent = <&ipic>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+ 0xa000 0 0 1 &ipic 18 8
+ 0xa000 0 0 2 &ipic 19 8
+
+ /* PCI1 IDSEL 0x15 AD21 */
+ 0xa800 0 0 1 &ipic 19 8
+ 0xa800 0 0 2 &ipic 20 8
+ 0xa800 0 0 3 &ipic 21 8
+ 0xa800 0 0 4 &ipic 18 8>;
+ /* filled by u-boot */
+ bus-range = <0 0>;
+ clock-frequency = <0>;
+ };
+};