V4L/DVB (9435): Add post process interfaces
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/frontends/stb0899_drv.h b/drivers/media/dvb/frontends/stb0899_drv.h
index 1e28114..45136d9 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.h
+++ b/drivers/media/dvb/frontends/stb0899_drv.h
@@ -50,6 +50,47 @@
IQ_SWAP_AUTO
};
+#define STB0899_GPIO00 0xf140
+#define STB0899_GPIO01 0xf141
+#define STB0899_GPIO02 0xf142
+#define STB0899_GPIO03 0xf143
+#define STB0899_GPIO04 0xf144
+#define STB0899_GPIO05 0xf145
+#define STB0899_GPIO06 0xf146
+#define STB0899_GPIO07 0xf147
+#define STB0899_GPIO08 0xf148
+#define STB0899_GPIO09 0xf149
+#define STB0899_GPIO10 0xf14a
+#define STB0899_GPIO11 0xf14b
+#define STB0899_GPIO12 0xf14c
+#define STB0899_GPIO13 0xf14d
+#define STB0899_GPIO14 0xf14e
+#define STB0899_GPIO15 0xf14f
+#define STB0899_GPIO16 0xf150
+#define STB0899_GPIO17 0xf151
+#define STB0899_GPIO18 0xf152
+#define STB0899_GPIO19 0xf153
+#define STB0899_GPIO20 0xf154
+
+#define STB0899_GPIOPULLUP 0x01 /* Output device is connected to Vdd */
+#define STB0899_GPIOPULLDN 0x00 /* Output device is connected to Vss */
+
+#define STB0899_POSTPROC_GPIO_POWER 0x00
+#define STB0899_POSTPROC_GPIO_LOCK 0x01
+
+/*
+ * Post process output configuration control
+ * 1. POWER ON/OFF (index 0)
+ * 2. FE_HAS_LOCK/LOCK_LOSS (index 1)
+ *
+ * @gpio = one of the above listed GPIO's
+ * @level = output state: pulled up or low
+ */
+struct stb0899_postproc {
+ u16 gpio;
+ u8 level;
+};
+
struct stb0899_config {
const struct stb0899_s1_reg *init_dev;
const struct stb0899_s2_reg *init_s2_demod;
@@ -57,6 +98,8 @@
const struct stb0899_s2_reg *init_s2_fec;
const struct stb0899_s1_reg *init_tst;
+ const struct stb0899_postproc *postproc;
+
enum stb0899_inversion inversion;
u32 xtal_freq;