Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
async_tx: checkpatch says s/__FUNCTION__/__func__/g
iop-adma.c: replace remaining __FUNCTION__ occurrences
fsldma: Add a completed cookie updated action in DMA finish interrupt.
fsldma: Add device_prep_dma_interrupt support to fsldma.c
dmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT.
fsldma: Fix fsldma.c warning messages when it's compiled under PPC64.
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 042073f..fc8e7c7 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -225,8 +225,6 @@
- documents the kernel probes debugging feature.
kref.txt
- docs on adding reference counters (krefs) to kernel objects.
-laptop-mode.txt
- - how to conserve battery power using laptop-mode.
laptops/
- directory with laptop related info and laptop driver documentation.
ldm.txt
@@ -301,12 +299,8 @@
- info on the Linux PCMCIA driver.
pi-futex.txt
- documentation on lightweight PI-futexes.
-pm.txt
- - info on Linux power management support.
pnp.txt
- Linux Plug and Play documentation.
-power_supply_class.txt
- - Tells userspace about battery, UPS, AC or DC power supply properties
power/
- directory with info on Linux PCI power management.
powerpc/
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 5681e2f..518ebe6 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1506,13 +1506,13 @@
-----------
laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptop-mode.txt.
+controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
block_dump
----------
block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptop-mode.txt.
+information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
swap_token_timeout
------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 533e67f..49318b9 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -138,7 +138,7 @@
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
- See also Documentation/pm.txt, pci=noacpi
+ See also Documentation/power/pm.txt, pci=noacpi
acpi_apic_instance= [ACPI, IOAPIC]
Format: <int>
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index 729c2c0..ee5692b 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -2,6 +2,8 @@
- This file
acer-wmi.txt
- information on the Acer Laptop WMI Extras driver.
+laptop-mode.txt
+ - how to conserve battery power using laptop-mode.
sony-laptop.txt
- Sony Notebook Control Driver (SNC) Readme.
sonypi.txt
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index b066963..23df051 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -48,7 +48,7 @@
To send me the DSDT, as root/sudo:
-cat /sys/firmware/acpi/DSDT > dsdt
+cat /sys/firmware/acpi/tables/DSDT > dsdt
And send me the resulting 'dsdt' file.
@@ -169,7 +169,7 @@
The LED is exposed through the LED subsystem, and can be found in:
-/sys/devices/platform/acer-wmi/leds/acer-mail:green/
+/sys/devices/platform/acer-wmi/leds/acer-wmi::mail/
The mail LED is autodetected, so if you don't have one, the LED device won't
be registered.
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
similarity index 100%
rename from Documentation/laptop-mode.txt
rename to Documentation/laptops/laptop-mode.txt
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index 8db4e41..a55d7f1 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -14,6 +14,12 @@
- Registering suspend notifiers in device drivers
pci.txt
- How the PCI Subsystem Does Power Management
+pm.txt
+ - info on Linux power management support.
+pm_qos_interface.txt
+ - info on Linux PM Quality of Service interface
+power_supply_class.txt
+ - Tells userspace about battery, UPS, AC or DC power supply properties
s2ram.txt
- How to get suspend to ram working (and debug it when it isn't)
states.txt
diff --git a/Documentation/pm.txt b/Documentation/power/pm.txt
similarity index 99%
rename from Documentation/pm.txt
rename to Documentation/power/pm.txt
index da8589a..be84150 100644
--- a/Documentation/pm.txt
+++ b/Documentation/power/pm.txt
@@ -108,7 +108,7 @@
* EINVAL if the request is not supported
* EBUSY if the device is now busy and cannot handle the request
* ENOMEM if the device was unable to handle the request due to memory
- *
+ *
* Details: The device request callback will be called before the
* device/system enters a suspend state (ACPI D1-D3) or
* or after the device/system resumes from suspend (ACPI D0).
diff --git a/Documentation/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
similarity index 100%
rename from Documentation/pm_qos_interface.txt
rename to Documentation/power/pm_qos_interface.txt
diff --git a/Documentation/power_supply_class.txt b/Documentation/power/power_supply_class.txt
similarity index 100%
rename from Documentation/power_supply_class.txt
rename to Documentation/power/power_supply_class.txt
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index ba9c2da..d9f28be 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -143,10 +143,10 @@
This is given by thermal zone driver as part of registration.
Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
RO
- Optional
+ Required
temp Current temperature as reported by thermal zone (sensor)
- Unit: degree Celsius
+ Unit: millidegree Celsius
RO
Required
@@ -163,7 +163,7 @@
charge of the thermal management.
trip_point_[0-*]_temp The temperature above which trip point will be fired
- Unit: degree Celsius
+ Unit: millidegree Celsius
RO
Optional
@@ -193,7 +193,7 @@
eg. For memory controller device on intel_menlow platform:
this should be "Memory controller"
RO
- Optional
+ Required
max_state The maximum permissible cooling state of this cooling device.
RO
@@ -219,16 +219,16 @@
|thermal_zone1:
|-----type: ACPI thermal zone
- |-----temp: 37
+ |-----temp: 37000
|-----mode: kernel
- |-----trip_point_0_temp: 100
+ |-----trip_point_0_temp: 100000
|-----trip_point_0_type: critical
- |-----trip_point_1_temp: 80
+ |-----trip_point_1_temp: 80000
|-----trip_point_1_type: passive
- |-----trip_point_2_temp: 70
- |-----trip_point_2_type: active[0]
- |-----trip_point_3_temp: 60
- |-----trip_point_3_type: active[1]
+ |-----trip_point_2_temp: 70000
+ |-----trip_point_2_type: active0
+ |-----trip_point_3_temp: 60000
+ |-----trip_point_3_type: active1
|-----cdev0: --->/sys/class/thermal/cooling_device0
|-----cdev0_trip_point: 1 /* cdev0 can be used for passive */
|-----cdev1: --->/sys/class/thermal/cooling_device3
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 002703b..729cdbd 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -330,6 +330,9 @@
config PCI_SYSCALL
def_bool PCI
+config IOMMU_HELPER
+ def_bool PCI
+
config ALPHA_CORE_AGP
bool
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index e07a23f..4e1c086 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -10,6 +10,7 @@
#include <linux/scatterlist.h>
#include <linux/log2.h>
#include <linux/dma-mapping.h>
+#include <linux/iommu-helper.h>
#include <asm/io.h>
#include <asm/hwrpb.h>
@@ -125,14 +126,6 @@
return iommu_arena_new_node(0, hose, base, window_size, align);
}
-static inline int is_span_boundary(unsigned int index, unsigned int nr,
- unsigned long shift,
- unsigned long boundary_size)
-{
- shift = (shift + index) & (boundary_size - 1);
- return shift + nr > boundary_size;
-}
-
/* Must be called with the arena lock held */
static long
iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
@@ -147,7 +140,6 @@
base = arena->dma_base >> PAGE_SHIFT;
if (dev) {
boundary_size = dma_get_seg_boundary(dev) + 1;
- BUG_ON(!is_power_of_2(boundary_size));
boundary_size >>= PAGE_SHIFT;
} else {
boundary_size = 1UL << (32 - PAGE_SHIFT);
@@ -161,7 +153,7 @@
again:
while (i < n && p+i < nent) {
- if (!i && is_span_boundary(p, n, base, boundary_size)) {
+ if (!i && iommu_is_span_boundary(p, n, base, boundary_size)) {
p = ALIGN(p + 1, mask + 1);
goto again;
}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 237fc12..6c70fed 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1259,7 +1259,7 @@
machines with more than one CPU.
In order to use APM, you will need supporting software. For location
- and more information, read <file:Documentation/pm.txt> and the
+ and more information, read <file:Documentation/power/pm.txt> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index f688c21..fbcaa06 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -283,24 +283,23 @@
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
-config ACPI_CUSTOM_DSDT
- bool "Include Custom DSDT"
+config ACPI_CUSTOM_DSDT_FILE
+ string "Custom DSDT Table file to include"
+ default ""
depends on !STANDALONE
- default n
help
This option supports a custom DSDT by linking it into the kernel.
See Documentation/acpi/dsdt-override.txt
- If unsure, say N.
-
-config ACPI_CUSTOM_DSDT_FILE
- string "Custom DSDT Table file to include"
- depends on ACPI_CUSTOM_DSDT
- default ""
- help
Enter the full path name to the file which includes the AmlCode
declaration.
+ If unsure, don't enter a file name.
+
+config ACPI_CUSTOM_DSDT
+ bool
+ default ACPI_CUSTOM_DSDT_FILE != ""
+
config ACPI_CUSTOM_DSDT_INITRD
bool "Read Custom DSDT from initramfs"
depends on BLK_DEV_INITRD
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index ce3c0a2..5b6760e 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -776,7 +776,7 @@
acpi_kobj = kobject_create_and_add("acpi", firmware_kobj);
if (!acpi_kobj) {
- printk(KERN_WARNING "%s: kset create error\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: kset create error\n", __func__);
acpi_kobj = NULL;
}
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 24a7865..6c5da83 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -449,6 +449,7 @@
input->phys = button->phys;
input->id.bustype = BUS_HOST;
input->id.product = button->type;
+ input->dev.parent = &device->dev;
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index caf873c..e7e197e3 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -129,6 +129,7 @@
struct mutex lock;
wait_queue_head_t wait;
struct list_head list;
+ atomic_t irq_count;
u8 handlers_installed;
} *boot_ec, *first_ec;
@@ -181,6 +182,8 @@
{
int ret = 0;
+ atomic_set(&ec->irq_count, 0);
+
if (unlikely(event == ACPI_EC_EVENT_OBF_1 &&
test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags)))
force_poll = 1;
@@ -227,6 +230,7 @@
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
goto end;
+ msleep(5);
}
}
pr_err(PREFIX "acpi_ec_wait timeout,"
@@ -529,6 +533,13 @@
struct acpi_ec *ec = data;
pr_debug(PREFIX "~~~> interrupt\n");
+ atomic_inc(&ec->irq_count);
+ if (atomic_read(&ec->irq_count) > 5) {
+ pr_err(PREFIX "GPE storm detected, disabling EC GPE\n");
+ acpi_disable_gpe(NULL, ec->gpe, ACPI_ISR);
+ clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+ return ACPI_INTERRUPT_HANDLED;
+ }
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
@@ -943,11 +954,7 @@
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
- if (ACPI_FAILURE(acpi_get_handle(NULL, ecdt_ptr->id,
- &boot_ec->handle))) {
- pr_info("Failed to locate handle for boot EC\n");
- boot_ec->handle = ACPI_ROOT_OBJECT;
- }
+ boot_ec->handle = ACPI_ROOT_OBJECT;
} else {
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 8edba7b..065819b 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1237,7 +1237,7 @@
if (clash) {
if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) {
- printk(KERN_INFO "%sACPI: %s resource %s [0x%llx-0x%llx]"
+ printk("%sACPI: %s resource %s [0x%llx-0x%llx]"
" conflicts with ACPI region %s"
" [0x%llx-0x%llx]\n",
acpi_enforce_resources == ENFORCE_RESOURCES_LAX
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 7f19859..7af414a 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -25,6 +25,7 @@
*/
+#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -76,6 +77,101 @@
return NULL;
}
+/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
+static struct dmi_system_id medion_md9580[] = {
+ {
+ .ident = "Medion MD9580-F laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
+static struct dmi_system_id dell_optiplex[] = {
+ {
+ .ident = "Dell Optiplex GX1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
+static struct dmi_system_id hp_t5710[] = {
+ {
+ .ident = "HP t5710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
+ DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
+ },
+ },
+ { }
+};
+
+struct prt_quirk {
+ struct dmi_system_id *system;
+ unsigned int segment;
+ unsigned int bus;
+ unsigned int device;
+ unsigned char pin;
+ char *source; /* according to BIOS */
+ char *actual_source;
+};
+
+/*
+ * These systems have incorrect _PRT entries. The BIOS claims the PCI
+ * interrupt at the listed segment/bus/device/pin is connected to the first
+ * link device, but it is actually connected to the second.
+ */
+static struct prt_quirk prt_quirks[] = {
+ { medion_md9580, 0, 0, 9, 'A',
+ "\\_SB_.PCI0.ISA.LNKA",
+ "\\_SB_.PCI0.ISA.LNKB"},
+ { dell_optiplex, 0, 0, 0xd, 'A',
+ "\\_SB_.LNKB",
+ "\\_SB_.LNKA"},
+ { hp_t5710, 0, 0, 1, 'A',
+ "\\_SB_.PCI0.LNK1",
+ "\\_SB_.PCI0.LNK3"},
+};
+
+static void
+do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt)
+{
+ int i;
+ struct prt_quirk *quirk;
+
+ for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
+ quirk = &prt_quirks[i];
+
+ /* All current quirks involve link devices, not GSIs */
+ if (!prt->source)
+ continue;
+
+ if (dmi_check_system(quirk->system) &&
+ entry->id.segment == quirk->segment &&
+ entry->id.bus == quirk->bus &&
+ entry->id.device == quirk->device &&
+ entry->pin + 'A' == quirk->pin &&
+ !strcmp(prt->source, quirk->source) &&
+ strlen(prt->source) >= strlen(quirk->actual_source)) {
+ printk(KERN_WARNING PREFIX "firmware reports "
+ "%04x:%02x:%02x[%c] connected to %s; "
+ "changing to %s\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, 'A' + entry->pin,
+ prt->source, quirk->actual_source);
+ strcpy(prt->source, quirk->actual_source);
+ }
+ }
+}
+
static int
acpi_pci_irq_add_entry(acpi_handle handle,
int segment, int bus, struct acpi_pci_routing_table *prt)
@@ -96,6 +192,8 @@
entry->id.function = prt->address & 0xFFFF;
entry->pin = prt->pin;
+ do_prt_fixups(entry, prt);
+
/*
* Type 1: Dynamic
* ---------------
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index f14ff1f..c3fed31 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -184,7 +184,7 @@
}
}
-static int acpi_pci_root_add(struct acpi_device *device)
+static int __devinit acpi_pci_root_add(struct acpi_device *device)
{
int result = 0;
struct acpi_pci_root *root = NULL;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index a3cc8a9..36a68fa 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -840,17 +840,19 @@
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- /*
- * if a processor object does not have an _STA object,
- * OSPM assumes that the processor is present.
- */
- if (status == AE_NOT_FOUND)
- return 1;
if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
return 1;
- ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present"));
+ /*
+ * _STA is mandatory for a processor that supports hot plug
+ */
+ if (status == AE_NOT_FOUND)
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Processor does not support hot plug\n"));
+ else
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Processor Device is not present"));
return 0;
}
@@ -886,8 +888,8 @@
return 0;
}
-static void
-acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data)
+static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
+ u32 event, void *data)
{
struct acpi_processor *pr;
struct acpi_device *device = NULL;
@@ -897,9 +899,10 @@
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
- printk("Processor driver received %s event\n",
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Processor driver received %s event\n",
(event == ACPI_NOTIFY_BUS_CHECK) ?
- "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
+ "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
if (!is_processor_present(handle))
break;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 3fac011..57570ac 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -609,7 +609,8 @@
status = acpi_evaluate_object(handle, "_EJD", NULL, &buffer);
if (ACPI_SUCCESS(status)) {
obj = buffer.pointer;
- status = acpi_get_handle(NULL, obj->string.pointer, ejd);
+ status = acpi_get_handle(ACPI_ROOT_OBJECT, obj->string.pointer,
+ ejd);
kfree(buffer.pointer);
}
return status;
@@ -966,7 +967,7 @@
case ACPI_BUS_TYPE_DEVICE:
status = acpi_get_object_info(handle, &buffer);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "%s: Error reading device info\n", __FUNCTION__);
+ printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
return;
}
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 293a1cb..d2f71a5 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -504,7 +504,7 @@
static void acpi_power_off(void)
{
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
- printk("%s called\n", __FUNCTION__);
+ printk("%s called\n", __func__);
local_irq_disable();
acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 55cf4c0..4749f37 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -319,7 +319,7 @@
goto fail;
for (i = 0; i < num_counters; ++i) {
- char buffer[10];
+ char buffer[12];
char *name;
if (i < num_gpes)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 8d4b79b..c4e00ac 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -879,6 +879,8 @@
}
/* sys I/F for generic thermal sysfs support */
+#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+
static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
{
struct acpi_thermal *tz = thermal->devdata;
@@ -886,7 +888,7 @@
if (!tz)
return -EINVAL;
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(tz->temperature));
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
}
static const char enabled[] = "kernel";
@@ -980,21 +982,21 @@
if (tz->trips.critical.flags.valid) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.critical.temperature));
trip--;
}
if (tz->trips.hot.flags.valid) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.hot.temperature));
trip--;
}
if (tz->trips.passive.flags.valid) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.passive.temperature));
trip--;
}
@@ -1002,7 +1004,7 @@
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
if (!trip)
- return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+ return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
tz->trips.active[i].temperature));
trip--;
}
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 9e8c20c..0a43c8e 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -99,6 +99,13 @@
#define HCI_VIDEO_OUT_CRT 0x2
#define HCI_VIDEO_OUT_TV 0x4
+static const struct acpi_device_id toshiba_device_ids[] = {
+ {"TOS6200", 0},
+ {"TOS1900", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, toshiba_device_ids);
+
/* utility
*/
diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c
index c7e128e..7361204 100644
--- a/drivers/acpi/utilities/utdebug.c
+++ b/drivers/acpi/utilities/utdebug.c
@@ -109,7 +109,7 @@
* RETURN: Updated pointer to the function name
*
* DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
- * This allows compiler macros such as __FUNCTION__ to be used
+ * This allows compiler macros such as __func__ to be used
* with no change to the debug output.
*
******************************************************************************/
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index 76ee766..e08b3fa 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -432,7 +432,7 @@
* element -- which is legal)
*/
if (!internal_object) {
- *obj_length = 0;
+ *obj_length = sizeof(union acpi_object);
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index eba55b7..44ea60c 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -407,6 +407,12 @@
break;
}
+ if (!element->reference.handle) {
+ printk(KERN_WARNING PREFIX "Invalid reference in"
+ " package %s\n", pathname);
+ status = AE_NULL_ENTRY;
+ break;
+ }
/* Get the acpi_handle. */
list->handles[i] = element->reference.handle;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 12cce69..1bc0c74 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -713,7 +713,7 @@
kfree(obj);
- if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
+ if (device->cap._BCL && device->cap._BCM && max_level > 0) {
int result;
static int count = 0;
char *name;
@@ -1201,7 +1201,7 @@
if (!video)
goto end;
- printk(KERN_INFO PREFIX "Please implement %s\n", __FUNCTION__);
+ printk(KERN_INFO PREFIX "Please implement %s\n", __func__);
seq_printf(seq, "<TODO>\n");
end:
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index efacc9f..c33b1c6 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -293,7 +293,7 @@
{
struct guid_block *block = NULL;
struct wmi_block *wblock = NULL;
- acpi_handle handle;
+ acpi_handle handle, wc_handle;
acpi_status status, wc_status = AE_ERROR;
struct acpi_object_list input, wc_input;
union acpi_object wc_params[1], wq_params[1];
@@ -338,8 +338,10 @@
* expensive, but have no corresponding WCxx method. So we
* should not fail if this happens.
*/
- wc_status = acpi_evaluate_object(handle, wc_method,
- &wc_input, NULL);
+ wc_status = acpi_get_handle(handle, wc_method, &wc_handle);
+ if (ACPI_SUCCESS(wc_status))
+ wc_status = acpi_evaluate_object(handle, wc_method,
+ &wc_input, NULL);
}
strcpy(method, "WQ");
@@ -351,7 +353,7 @@
* If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
* the WQxx method failed - we should disable collection anyway.
*/
- if ((block->flags & ACPI_WMI_EXPENSIVE) && wc_status) {
+ if ((block->flags & ACPI_WMI_EXPENSIVE) && ACPI_SUCCESS(wc_status)) {
wc_params[0].integer.value = 0;
status = acpi_evaluate_object(handle,
wc_method, &wc_input, NULL);
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 32c79a5..7652e87d 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -217,7 +217,6 @@
*/
static DEFINE_SPINLOCK(floppy_lock);
-static struct completion device_release;
static unsigned short virtual_dma_port = 0x3f0;
irqreturn_t floppy_interrupt(int irq, void *dev_id);
@@ -4144,7 +4143,6 @@
static void floppy_device_release(struct device *dev)
{
- complete(&device_release);
}
static struct platform_device floppy_device[N_DRIVE];
@@ -4539,7 +4537,6 @@
{
int drive;
- init_completion(&device_release);
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
unregister_blkdev(FLOPPY_MAJOR, "fd");
@@ -4564,8 +4561,6 @@
/* eject disk, if any */
fd_eject(0);
-
- wait_for_completion(&device_release);
}
module_param(floppy, charp, 0);
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 589ac6f..3f9d0a9 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -1709,7 +1709,7 @@
if (iobase || iobase1 || iobase2 || iobase3) {
for(i = 0; i < RC_NBOARD; i++)
- rc_board[0].base = 0;
+ rc_board[i].base = 0;
}
if (iobase)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 982e27b..962817e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -108,6 +108,7 @@
depends on ACPI
depends on LEDS_CLASS
depends on BACKLIGHT_CLASS_DEVICE
+ depends on SERIO_I8042
select ACPI_WMI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index 74d12b4..dd13a37 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -219,6 +219,15 @@
},
{
.callback = dmi_matched,
+ .ident = "Acer Aspire 3610",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3610"),
+ },
+ .driver_data = &quirk_acer_travelmate_2490,
+ },
+ {
+ .callback = dmi_matched,
.ident = "Acer Aspire 5100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -228,6 +237,15 @@
},
{
.callback = dmi_matched,
+ .ident = "Acer Aspire 5610",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+ },
+ .driver_data = &quirk_acer_travelmate_2490,
+ },
+ {
+ .callback = dmi_matched,
.ident = "Acer Aspire 5630",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -761,11 +779,11 @@
}
static struct led_classdev mail_led = {
- .name = "acer-mail:green",
+ .name = "acer-wmi::mail",
.brightness_set = mail_led_set,
};
-static int __init acer_led_init(struct device *dev)
+static int __devinit acer_led_init(struct device *dev)
{
return led_classdev_register(dev, &mail_led);
}
@@ -798,7 +816,7 @@
.update_status = update_bl_status,
};
-static int __init acer_backlight_init(struct device *dev)
+static int __devinit acer_backlight_init(struct device *dev)
{
struct backlight_device *bd;
@@ -817,7 +835,7 @@
return 0;
}
-static void __exit acer_backlight_exit(void)
+static void acer_backlight_exit(void)
{
backlight_device_unregister(acer_backlight_device);
}
@@ -1052,11 +1070,12 @@
if (wmi_has_guid(WMID_GUID2) && interface) {
if (ACPI_FAILURE(WMID_set_capabilities())) {
- printk(ACER_ERR "Unable to detect available devices\n");
+ printk(ACER_ERR "Unable to detect available WMID "
+ "devices\n");
return -ENODEV;
}
} else if (!wmi_has_guid(WMID_GUID2) && interface) {
- printk(ACER_ERR "Unable to detect available devices\n");
+ printk(ACER_ERR "No WMID device detection method found\n");
return -ENODEV;
}
@@ -1064,21 +1083,20 @@
interface = &AMW0_interface;
if (ACPI_FAILURE(AMW0_set_capabilities())) {
- printk(ACER_ERR "Unable to detect available devices\n");
+ printk(ACER_ERR "Unable to detect available AMW0 "
+ "devices\n");
return -ENODEV;
}
}
- if (wmi_has_guid(AMW0_GUID1)) {
- if (ACPI_FAILURE(AMW0_find_mailled()))
- printk(ACER_ERR "Unable to detect mail LED\n");
- }
+ if (wmi_has_guid(AMW0_GUID1))
+ AMW0_find_mailled();
find_quirks();
if (!interface) {
- printk(ACER_ERR "No or unsupported WMI interface, unable to ");
- printk(KERN_CONT "load.\n");
+ printk(ACER_ERR "No or unsupported WMI interface, unable to "
+ "load\n");
return -ENODEV;
}
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 899e3f7..02ff3d1 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -315,7 +315,7 @@
break;
default:
- if (event > ARRAY_SIZE(sony_laptop_input_index)) {
+ if (event >= ARRAY_SIZE(sony_laptop_input_index)) {
dprintk("sony_laptop_report_input_event, event not known: %d\n", event);
break;
}
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 6a9403d..d708358 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -143,14 +143,18 @@
/* register the bus with sysfs as the parent is now
* properly registered. */
child_bus = dev->subordinate;
+ if (child_bus->is_added)
+ continue;
child_bus->dev.parent = child_bus->bridge;
retval = device_register(&child_bus->dev);
if (retval)
dev_err(&dev->dev, "Error registering pci_bus,"
" continuing...\n");
- else
+ else {
+ child_bus->is_added = 1;
retval = device_create_file(&child_bus->dev,
&dev_attr_cpuaffinity);
+ }
if (retval)
dev_err(&dev->dev, "Error creating cpuaffinity"
" file, continuing...\n");
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 4a23654..72f7476 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -272,21 +272,29 @@
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
acpi_handle tmp;
- static int state_conv[] = {
- [0] = 0,
- [1] = 1,
- [2] = 2,
- [3] = 3,
- [4] = 3
+ static const u8 state_conv[] = {
+ [PCI_D0] = ACPI_STATE_D0,
+ [PCI_D1] = ACPI_STATE_D1,
+ [PCI_D2] = ACPI_STATE_D2,
+ [PCI_D3hot] = ACPI_STATE_D3,
+ [PCI_D3cold] = ACPI_STATE_D3
};
- int acpi_state = state_conv[(int __force) state];
if (!handle)
return -ENODEV;
/* If the ACPI device has _EJ0, ignore the device */
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
return 0;
- return acpi_bus_set_power(handle, acpi_state);
+
+ switch (state) {
+ case PCI_D0:
+ case PCI_D1:
+ case PCI_D2:
+ case PCI_D3hot:
+ case PCI_D3cold:
+ return acpi_bus_set_power(handle, state_conv[state]);
+ }
+ return -EINVAL;
}
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index c47a650..41a3d00 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -99,7 +99,7 @@
static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
-/**
+/*
* compute BRG and DIV bits to setup spi clock based on main input clock rate
* that was specified in platform data structure
* according to au1550 datasheet:
@@ -650,7 +650,7 @@
return hw->txrx_bufs(spi, t);
}
-static irqreturn_t au1550_spi_irq(int irq, void *dev, struct pt_regs *regs)
+static irqreturn_t au1550_spi_irq(int irq, void *dev)
{
struct au1550_spi *hw = dev;
return hw->irq_callback(hw);
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index f7f8580..71e8814 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -344,12 +344,14 @@
t->rx_dma = t->tx_dma = 0;
status = bitbang->txrx_bufs(spi, t);
}
+ if (status > 0)
+ m->actual_length += status;
if (status != t->len) {
- if (status > 0)
- status = -EMSGSIZE;
+ /* always report some kind of error */
+ if (status >= 0)
+ status = -EREMOTEIO;
break;
}
- m->actual_length += status;
status = 0;
/* protocol tweaks before next transfer */
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 69f19f2..3ab313e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -4,6 +4,7 @@
menuconfig THERMAL
bool "Generic Thermal sysfs driver"
+ select HWMON
default y
help
Generic Thermal Sysfs driver offers a generic mechanism for
diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c
index 8b86e53..41bd4c8 100644
--- a/drivers/thermal/thermal.c
+++ b/drivers/thermal/thermal.c
@@ -30,8 +30,10 @@
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/spinlock.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
-MODULE_AUTHOR("Zhang Rui")
+MODULE_AUTHOR("Zhang Rui");
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL");
@@ -56,6 +58,9 @@
static LIST_HEAD(thermal_cdev_list);
static DEFINE_MUTEX(thermal_list_lock);
+static struct device *thermal_hwmon;
+#define MAX_THERMAL_ZONES 10
+
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int err;
@@ -87,7 +92,67 @@
mutex_unlock(lock);
}
-/* sys I/F for thermal zone */
+/* hwmon sys I/F*/
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "thermal_sys_class\n");
+}
+
+static ssize_t
+temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct thermal_zone_device *tz;
+ struct sensor_device_attribute *sensor_attr
+ = to_sensor_dev_attr(attr);
+
+ list_for_each_entry(tz, &thermal_tz_list, node)
+ if (tz->id == sensor_attr->index)
+ return tz->ops->get_temp(tz, buf);
+
+ return -ENODEV;
+}
+
+static ssize_t
+temp_crit_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct thermal_zone_device *tz;
+ struct sensor_device_attribute *sensor_attr
+ = to_sensor_dev_attr(attr);
+
+ list_for_each_entry(tz, &thermal_tz_list, node)
+ if (tz->id == sensor_attr->index)
+ return tz->ops->get_trip_temp(tz, 0, buf);
+
+ return -ENODEV;
+}
+
+static DEVICE_ATTR(name, 0444, name_show, NULL);
+static struct sensor_device_attribute sensor_attrs[] = {
+ SENSOR_ATTR(temp1_input, 0444, temp_input_show, NULL, 0),
+ SENSOR_ATTR(temp1_crit, 0444, temp_crit_show, NULL, 0),
+ SENSOR_ATTR(temp2_input, 0444, temp_input_show, NULL, 1),
+ SENSOR_ATTR(temp2_crit, 0444, temp_crit_show, NULL, 1),
+ SENSOR_ATTR(temp3_input, 0444, temp_input_show, NULL, 2),
+ SENSOR_ATTR(temp3_crit, 0444, temp_crit_show, NULL, 2),
+ SENSOR_ATTR(temp4_input, 0444, temp_input_show, NULL, 3),
+ SENSOR_ATTR(temp4_crit, 0444, temp_crit_show, NULL, 3),
+ SENSOR_ATTR(temp5_input, 0444, temp_input_show, NULL, 4),
+ SENSOR_ATTR(temp5_crit, 0444, temp_crit_show, NULL, 4),
+ SENSOR_ATTR(temp6_input, 0444, temp_input_show, NULL, 5),
+ SENSOR_ATTR(temp6_crit, 0444, temp_crit_show, NULL, 5),
+ SENSOR_ATTR(temp7_input, 0444, temp_input_show, NULL, 6),
+ SENSOR_ATTR(temp7_crit, 0444, temp_crit_show, NULL, 6),
+ SENSOR_ATTR(temp8_input, 0444, temp_input_show, NULL, 7),
+ SENSOR_ATTR(temp8_crit, 0444, temp_crit_show, NULL, 7),
+ SENSOR_ATTR(temp9_input, 0444, temp_input_show, NULL, 8),
+ SENSOR_ATTR(temp9_crit, 0444, temp_crit_show, NULL, 8),
+ SENSOR_ATTR(temp10_input, 0444, temp_input_show, NULL, 9),
+ SENSOR_ATTR(temp10_crit, 0444, temp_crit_show, NULL, 9),
+};
+
+/* thermal zone sys I/F */
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
@@ -214,7 +279,7 @@
device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \
} while (0)
-/* sys I/F for cooling device */
+/* cooling device sys I/F */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
@@ -447,6 +512,9 @@
struct thermal_zone_device *pos;
int result;
+ if (!type)
+ return ERR_PTR(-EINVAL);
+
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
@@ -477,11 +545,9 @@
}
/* sys I/F */
- if (type) {
- result = device_create_file(&cdev->device, &dev_attr_cdev_type);
- if (result)
- goto unregister;
- }
+ result = device_create_file(&cdev->device, &dev_attr_cdev_type);
+ if (result)
+ goto unregister;
result = device_create_file(&cdev->device, &dev_attr_max_state);
if (result)
@@ -547,8 +613,8 @@
tz->ops->unbind(tz, cdev);
}
mutex_unlock(&thermal_list_lock);
- if (cdev->type[0])
- device_remove_file(&cdev->device, &dev_attr_cdev_type);
+
+ device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
@@ -580,6 +646,9 @@
int result;
int count;
+ if (!type)
+ return ERR_PTR(-EINVAL);
+
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
@@ -601,6 +670,13 @@
kfree(tz);
return ERR_PTR(result);
}
+ if (tz->id >= MAX_THERMAL_ZONES) {
+ printk(KERN_ERR PREFIX
+ "Too many thermal zones\n");
+ release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
+ kfree(tz);
+ return ERR_PTR(-EINVAL);
+ }
strcpy(tz->type, type);
tz->ops = ops;
@@ -615,13 +691,28 @@
return ERR_PTR(result);
}
- /* sys I/F */
- if (type) {
- result = device_create_file(&tz->device, &dev_attr_type);
- if (result)
- goto unregister;
+ /* hwmon sys I/F */
+ result = device_create_file(thermal_hwmon,
+ &sensor_attrs[tz->id * 2].dev_attr);
+ if (result)
+ goto unregister;
+
+ if (trips > 0) {
+ char buf[40];
+ result = tz->ops->get_trip_type(tz, 0, buf);
+ if (result > 0 && !strcmp(buf, "critical\n")) {
+ result = device_create_file(thermal_hwmon,
+ &sensor_attrs[tz->id * 2 + 1].dev_attr);
+ if (result)
+ goto unregister;
+ }
}
+ /* sys I/F */
+ result = device_create_file(&tz->device, &dev_attr_type);
+ if (result)
+ goto unregister;
+
result = device_create_file(&tz->device, &dev_attr_temp);
if (result)
goto unregister;
@@ -687,8 +778,17 @@
tz->ops->unbind(tz, cdev);
mutex_unlock(&thermal_list_lock);
- if (tz->type[0])
- device_remove_file(&tz->device, &dev_attr_type);
+ device_remove_file(thermal_hwmon,
+ &sensor_attrs[tz->id * 2].dev_attr);
+ if (tz->trips > 0) {
+ char buf[40];
+ if (tz->ops->get_trip_type(tz, 0, buf) > 0)
+ if (!strcmp(buf, "critical\n"))
+ device_remove_file(thermal_hwmon,
+ &sensor_attrs[tz->id * 2 + 1].dev_attr);
+ }
+
+ device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
@@ -705,6 +805,19 @@
EXPORT_SYMBOL(thermal_zone_device_unregister);
+static void thermal_exit(void)
+{
+ if (thermal_hwmon) {
+ device_remove_file(thermal_hwmon, &dev_attr_name);
+ hwmon_device_unregister(thermal_hwmon);
+ }
+ class_unregister(&thermal_class);
+ idr_destroy(&thermal_tz_idr);
+ idr_destroy(&thermal_cdev_idr);
+ mutex_destroy(&thermal_idr_lock);
+ mutex_destroy(&thermal_list_lock);
+}
+
static int __init thermal_init(void)
{
int result = 0;
@@ -716,16 +829,20 @@
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
}
- return result;
-}
-static void __exit thermal_exit(void)
-{
- class_unregister(&thermal_class);
- idr_destroy(&thermal_tz_idr);
- idr_destroy(&thermal_cdev_idr);
- mutex_destroy(&thermal_idr_lock);
- mutex_destroy(&thermal_list_lock);
+ thermal_hwmon = hwmon_device_register(NULL);
+ if (IS_ERR(thermal_hwmon)) {
+ result = PTR_ERR(thermal_hwmon);
+ thermal_hwmon = NULL;
+ printk(KERN_ERR PREFIX
+ "unable to register hwmon device\n");
+ thermal_exit();
+ return result;
+ }
+
+ result = device_create_file(thermal_hwmon, &dev_attr_name);
+
+ return result;
}
subsys_initcall(thermal_init);
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 6dc0334..4206454 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -640,17 +640,17 @@
ret = -EACCES;
if (!ptrace_may_attach(task))
- goto out;
+ goto out_task;
ret = -EINVAL;
/* file position must be aligned */
if (*ppos % PM_ENTRY_BYTES)
- goto out;
+ goto out_task;
ret = 0;
mm = get_task_mm(task);
if (!mm)
- goto out;
+ goto out_task;
ret = -ENOMEM;
uaddr = (unsigned long)buf & PAGE_MASK;
@@ -658,7 +658,7 @@
pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE;
pages = kmalloc(pagecount * sizeof(struct page *), GFP_KERNEL);
if (!pages)
- goto out_task;
+ goto out_mm;
down_read(¤t->mm->mmap_sem);
ret = get_user_pages(current, current->mm, uaddr, pagecount,
@@ -668,6 +668,12 @@
if (ret < 0)
goto out_free;
+ if (ret != pagecount) {
+ pagecount = ret;
+ ret = -EFAULT;
+ goto out_pages;
+ }
+
pm.out = buf;
pm.end = buf + count;
@@ -699,15 +705,17 @@
ret = pm.out - buf;
}
+out_pages:
for (; pagecount; pagecount--) {
page = pages[pagecount-1];
if (!PageReserved(page))
SetPageDirty(page);
page_cache_release(page);
}
- mmput(mm);
out_free:
kfree(pages);
+out_mm:
+ mmput(mm);
out_task:
put_task_struct(task);
out:
diff --git a/include/asm-h8300/uaccess.h b/include/asm-h8300/uaccess.h
index a22350e..356068c 100644
--- a/include/asm-h8300/uaccess.h
+++ b/include/asm-h8300/uaccess.h
@@ -91,22 +91,19 @@
#define get_user(x, ptr) \
({ \
int __gu_err = 0; \
- uint32_t __gu_val = 0; \
+ typeof(*(ptr)) __gu_val = *ptr; \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
case 4: \
- __gu_val = *(ptr); \
- break; \
- case 8: \
- memcpy(&__gu_val, ptr, sizeof (*(ptr))); \
+ case 8: \
break; \
default: \
- __gu_val = 0; \
__gu_err = __get_user_bad(); \
+ __gu_val = 0; \
break; \
} \
- (x) = (typeof(*(ptr)))__gu_val; \
+ (x) = __gu_val; \
__gu_err; \
})
#define __get_user(x, ptr) get_user(x, ptr)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 38eff19..9010f54 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -278,6 +278,7 @@
struct device dev;
struct bin_attribute *legacy_io; /* legacy I/O for this bus */
struct bin_attribute *legacy_mem; /* legacy mem */
+ unsigned int is_added:1;
};
#define pci_bus_b(n) list_entry(n, struct pci_bus, node)
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 7983317..6233f3b 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -190,7 +190,7 @@
notification of APM "events" (e.g. battery status change).
In order to use APM, you will need supporting software. For location
- and more information, read <file:Documentation/pm.txt> and the
+ and more information, read <file:Documentation/power/pm.txt> and the
Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 72a020c..5f91a07 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -447,7 +447,7 @@
* of @bm->cur_zone_bm are updated.
*/
-static void memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn,
+static int memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn,
void **addr, unsigned int *bit_nr)
{
struct zone_bitmap *zone_bm;
@@ -461,7 +461,8 @@
while (pfn < zone_bm->start_pfn || pfn >= zone_bm->end_pfn) {
zone_bm = zone_bm->next;
- BUG_ON(!zone_bm);
+ if (!zone_bm)
+ return -EFAULT;
}
bm->cur.zone_bm = zone_bm;
}
@@ -479,23 +480,40 @@
pfn -= bb->start_pfn;
*bit_nr = pfn % BM_BITS_PER_CHUNK;
*addr = bb->data + pfn / BM_BITS_PER_CHUNK;
+ return 0;
}
static void memory_bm_set_bit(struct memory_bitmap *bm, unsigned long pfn)
{
void *addr;
unsigned int bit;
+ int error;
- memory_bm_find_bit(bm, pfn, &addr, &bit);
+ error = memory_bm_find_bit(bm, pfn, &addr, &bit);
+ BUG_ON(error);
set_bit(bit, addr);
}
+static int mem_bm_set_bit_check(struct memory_bitmap *bm, unsigned long pfn)
+{
+ void *addr;
+ unsigned int bit;
+ int error;
+
+ error = memory_bm_find_bit(bm, pfn, &addr, &bit);
+ if (!error)
+ set_bit(bit, addr);
+ return error;
+}
+
static void memory_bm_clear_bit(struct memory_bitmap *bm, unsigned long pfn)
{
void *addr;
unsigned int bit;
+ int error;
- memory_bm_find_bit(bm, pfn, &addr, &bit);
+ error = memory_bm_find_bit(bm, pfn, &addr, &bit);
+ BUG_ON(error);
clear_bit(bit, addr);
}
@@ -503,8 +521,10 @@
{
void *addr;
unsigned int bit;
+ int error;
- memory_bm_find_bit(bm, pfn, &addr, &bit);
+ error = memory_bm_find_bit(bm, pfn, &addr, &bit);
+ BUG_ON(error);
return test_bit(bit, addr);
}
@@ -709,8 +729,15 @@
region->end_pfn << PAGE_SHIFT);
for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++)
- if (pfn_valid(pfn))
- memory_bm_set_bit(bm, pfn);
+ if (pfn_valid(pfn)) {
+ /*
+ * It is safe to ignore the result of
+ * mem_bm_set_bit_check() here, since we won't
+ * touch the PFNs for which the error is
+ * returned anyway.
+ */
+ mem_bm_set_bit_check(bm, pfn);
+ }
}
}
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 4bb5a11..0259228 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -310,7 +310,9 @@
start_dma_addr = virt_to_bus(io_tlb_start) & mask;
offset_slots = ALIGN(start_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
- max_slots = ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
+ max_slots = mask + 1
+ ? ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT
+ : 1UL << (BITS_PER_LONG - IO_TLB_SHIFT);
/*
* For mappings greater than a page, we limit the stride (and
@@ -333,16 +335,18 @@
index = ALIGN(io_tlb_index, stride);
if (index >= io_tlb_nslabs)
index = 0;
-
- while (is_span_boundary(index, nslots, offset_slots,
- max_slots)) {
- index += stride;
- if (index >= io_tlb_nslabs)
- index = 0;
- }
wrap = index;
do {
+ while (is_span_boundary(index, nslots, offset_slots,
+ max_slots)) {
+ index += stride;
+ if (index >= io_tlb_nslabs)
+ index = 0;
+ if (index == wrap)
+ goto not_found;
+ }
+
/*
* If we find a slot that indicates we have 'nslots'
* number of contiguous buffers, we allocate the
@@ -367,14 +371,12 @@
goto found;
}
- do {
- index += stride;
- if (index >= io_tlb_nslabs)
- index = 0;
- } while (is_span_boundary(index, nslots, offset_slots,
- max_slots));
+ index += stride;
+ if (index >= io_tlb_nslabs)
+ index = 0;
} while (index != wrap);
+ not_found:
spin_unlock_irqrestore(&io_tlb_lock, flags);
return NULL;
}
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 74c2f9db..263d04a 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -247,6 +247,10 @@
my ($type,$declaration_name,$return_type);
my ($newsection,$newcontents,$prototype,$filelist, $brcount, %source_map);
+if (defined($ENV{'KBUILD_VERBOSE'})) {
+ $verbose = "$ENV{'KBUILD_VERBOSE'}";
+}
+
# Generated docbook code is inserted in a template at a point where
# docbook v3.1 requires a non-zero sequence of RefEntry's; see:
# http://www.oasis-open.org/docbook/documentation/reference/html/refentry.html
diff --git a/security/smack/smack.h b/security/smack/smack.h
index a21a0e9..62c1e98 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -26,14 +26,6 @@
#define SMK_MAXLEN 23
#define SMK_LABELLEN (SMK_MAXLEN+1)
-/*
- * How many kinds of access are there?
- * Here's your answer.
- */
-#define SMK_ACCESSDASH '-'
-#define SMK_ACCESSLOW "rwxa"
-#define SMK_ACCESSKINDS (sizeof(SMK_ACCESSLOW) - 1)
-
struct superblock_smack {
char *smk_root;
char *smk_floor;
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 358c92c..afe7c9b 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -81,10 +81,23 @@
/*
* Values for parsing cipso rules
* SMK_DIGITLEN: Length of a digit field in a rule.
- * SMK_CIPSOMEN: Minimum possible cipso rule length.
+ * SMK_CIPSOMIN: Minimum possible cipso rule length.
+ * SMK_CIPSOMAX: Maximum possible cipso rule length.
*/
#define SMK_DIGITLEN 4
-#define SMK_CIPSOMIN (SMK_MAXLEN + 2 * SMK_DIGITLEN)
+#define SMK_CIPSOMIN (SMK_LABELLEN + 2 * SMK_DIGITLEN)
+#define SMK_CIPSOMAX (SMK_CIPSOMIN + SMACK_CIPSO_MAXCATNUM * SMK_DIGITLEN)
+
+/*
+ * Values for parsing MAC rules
+ * SMK_ACCESS: Maximum possible combination of access permissions
+ * SMK_ACCESSLEN: Maximum length for a rule access field
+ * SMK_LOADLEN: Smack rule length
+ */
+#define SMK_ACCESS "rwxa"
+#define SMK_ACCESSLEN (sizeof(SMK_ACCESS) - 1)
+#define SMK_LOADLEN (SMK_LABELLEN + SMK_LABELLEN + SMK_ACCESSLEN)
+
/*
* Seq_file read operations for /smack/load
@@ -229,14 +242,10 @@
* The format is exactly:
* char subject[SMK_LABELLEN]
* char object[SMK_LABELLEN]
- * char access[SMK_ACCESSKINDS]
+ * char access[SMK_ACCESSLEN]
*
- * Anything following is commentary and ignored.
- *
- * writes must be SMK_LABELLEN+SMK_LABELLEN+4 bytes.
+ * writes must be SMK_LABELLEN+SMK_LABELLEN+SMK_ACCESSLEN bytes.
*/
-#define MINIMUM_LOAD (SMK_LABELLEN + SMK_LABELLEN + SMK_ACCESSKINDS)
-
static ssize_t smk_write_load(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -253,7 +262,7 @@
return -EPERM;
if (*ppos != 0)
return -EINVAL;
- if (count < MINIMUM_LOAD)
+ if (count != SMK_LOADLEN)
return -EINVAL;
data = kzalloc(count, GFP_KERNEL);
@@ -513,7 +522,7 @@
return -EPERM;
if (*ppos != 0)
return -EINVAL;
- if (count <= SMK_CIPSOMIN)
+ if (count < SMK_CIPSOMIN || count > SMK_CIPSOMAX)
return -EINVAL;
data = kzalloc(count + 1, GFP_KERNEL);
@@ -547,7 +556,7 @@
if (ret != 1 || catlen > SMACK_CIPSO_MAXCATNUM)
goto out;
- if (count <= (SMK_CIPSOMIN + catlen * SMK_DIGITLEN))
+ if (count != (SMK_CIPSOMIN + catlen * SMK_DIGITLEN))
goto out;
memset(mapcatset, 0, sizeof(mapcatset));