PCI: rcar: Convert to use generic config accessors
Convert the rcar-gen2 host PCI driver to use the generic config access
functions.
This changes the I/O accessors from io(read|write)X to readX/writeX
variants which are equivalent on ARM.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
CC: Simon Horman <horms@verge.net.au>
CC: linux-sh@vger.kernel.org
diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index d9c042f..dd6b84e 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
@@ -131,52 +131,6 @@
return priv->reg + (slot >> 1) * 0x100 + where;
}
-static int rcar_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- void __iomem *reg = rcar_pci_cfg_base(bus, devfn, where);
-
- if (!reg)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1:
- *val = ioread8(reg);
- break;
- case 2:
- *val = ioread16(reg);
- break;
- default:
- *val = ioread32(reg);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int rcar_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- void __iomem *reg = rcar_pci_cfg_base(bus, devfn, where);
-
- if (!reg)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1:
- iowrite8(val, reg);
- break;
- case 2:
- iowrite16(val, reg);
- break;
- default:
- iowrite32(val, reg);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
/* PCI interrupt mapping */
static int rcar_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
@@ -325,8 +279,9 @@
}
static struct pci_ops rcar_pci_ops = {
- .read = rcar_pci_read_config,
- .write = rcar_pci_write_config,
+ .map_bus = rcar_pci_cfg_base,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
};
static int rcar_pci_probe(struct platform_device *pdev)