bcma: add early_init function for PCIe core and move some fix into it
There are some PCIe core fixes that need to be applied before accessing
SPROM, otherwise reading it may fail.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index b85a505..7866664 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -145,6 +145,47 @@
}
/**************************************************
+ * Early init.
+ **************************************************/
+
+static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
+{
+ struct bcma_device *core = pc->core;
+ u16 val16, core_index;
+ uint regoff;
+
+ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
+ core_index = (u16)core->core_index;
+
+ val16 = pcicore_read16(pc, regoff);
+ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
+ != core_index) {
+ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
+ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
+ pcicore_write16(pc, regoff, val16);
+ }
+}
+
+/*
+ * Apply some early fixes required before accessing SPROM.
+ * See also si_pci_fixcfg.
+ */
+void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
+{
+ if (pc->early_setup_done)
+ return;
+
+ pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
+ if (pc->hostmode)
+ goto out;
+
+ bcma_core_pci_fixcfg(pc);
+
+out:
+ pc->early_setup_done = true;
+}
+
+/**************************************************
* Workarounds.
**************************************************/
@@ -175,24 +216,6 @@
tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
}
-static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
-{
- struct bcma_device *core = pc->core;
- u16 val16, core_index;
- uint regoff;
-
- regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
- core_index = (u16)core->core_index;
-
- val16 = pcicore_read16(pc, regoff);
- if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
- != core_index) {
- val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
- (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
- pcicore_write16(pc, regoff, val16);
- }
-}
-
/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
/* Needs to happen when coming out of 'standby'/'hibernate' */
static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
@@ -216,7 +239,6 @@
static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
{
- bcma_core_pci_fixcfg(pc);
bcma_pcicore_serdes_workaround(pc);
bcma_core_pci_config_fixup(pc);
}
@@ -226,11 +248,11 @@
if (pc->setup_done)
return;
- pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
+ bcma_core_pci_early_init(pc);
+
if (pc->hostmode)
bcma_core_pci_hostmode_init(pc);
-
- if (!pc->hostmode)
+ else
bcma_core_pci_clientmode_init(pc);
}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 73b2ee3..38bde6e 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -402,6 +402,13 @@
bcma_core_chipcommon_early_init(&bus->drv_cc);
}
+ /* Early init PCIE core */
+ core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ if (core) {
+ bus->drv_pci[0].core = core;
+ bcma_core_pci_early_init(&bus->drv_pci[0]);
+ }
+
/* Cores providing flash access go before SPROM init */
list_for_each_entry(core, &bus->cores, list) {
if (bcma_is_core_needed_early(core->id.id))
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
index 0333e60..3f809ae 100644
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -223,6 +223,7 @@
struct bcma_drv_pci {
struct bcma_device *core;
+ u8 early_setup_done:1;
u8 setup_done:1;
u8 hostmode:1;
@@ -237,6 +238,7 @@
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
+extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
struct bcma_device *core, bool enable);