ARM: EXYNOS: Update & move usb-phy types to generic include layer

Updating the names of usb-phy types to more generic names:
USB_PHY_TYPE_DEIVCE & USB_PHY_TYPE_HOST; and further update
its dependencies.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 319dcfa..46ca5ef 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/usb/samsung_usb_phy.h>
 #include <plat/usb-phy.h>
 
 #define EHCI_INSNREG00(base)			(base + 0x90)
@@ -164,7 +165,7 @@
 	}
 
 	if (pdata->phy_init)
-		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = hcd->regs;
@@ -198,7 +199,7 @@
 	usb_remove_hcd(hcd);
 
 	if (pdata && pdata->phy_exit)
-		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
 
 	clk_disable_unprepare(s5p_ehci->clk);
 
@@ -229,7 +230,7 @@
 	rc = ehci_suspend(hcd, do_wakeup);
 
 	if (pdata && pdata->phy_exit)
-		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
 
 	clk_disable_unprepare(s5p_ehci->clk);
 
@@ -246,7 +247,7 @@
 	clk_prepare_enable(s5p_ehci->clk);
 
 	if (pdata && pdata->phy_init)
-		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
 
 	/* DMA burst Enable */
 	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index aa3b884..804fb62 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-exynos.h>
+#include <linux/usb/samsung_usb_phy.h>
 #include <plat/usb-phy.h>
 
 struct exynos_ohci_hcd {
@@ -153,7 +154,7 @@
 	}
 
 	if (pdata->phy_init)
-		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
 
 	ohci = hcd_to_ohci(hcd);
 	ohci_hcd_init(ohci);
@@ -184,7 +185,7 @@
 	usb_remove_hcd(hcd);
 
 	if (pdata && pdata->phy_exit)
-		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
 
 	clk_disable_unprepare(exynos_ohci->clk);
 
@@ -229,7 +230,7 @@
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	if (pdata && pdata->phy_exit)
-		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
 
 	clk_disable_unprepare(exynos_ohci->clk);
 
@@ -249,7 +250,7 @@
 	clk_prepare_enable(exynos_ohci->clk);
 
 	if (pdata && pdata->phy_init)
-		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+		pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
 
 	ohci_resume(hcd, false);