Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull device tree changes from Grant Likely:
"Here are the DT changes I've got queued up for v3.8. As described
below, there are a lot of bug fixes here and documentation updates but
nothing major:
Bug fixes, little cleanups, and documentation changes. The most
invasive thing here touches a bunch of the arch directories to use a
common build rule for .dtb files. There are no major changes to
functionality here other than a few new helper functions."
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
arm64: Fix the dtbs target building
mtd: nand: davinci: fix the binding documentation
rtc: rtc-mv: Add the device tree binding documentation
devicetree/bindings: Move gpio-leds binding into leds directory
of/vendor-prefixes: add Imagination Technologies
microblaze: use new common dtc rule
c6x: use new common dtc rule
openrisc: use new common dtc rule
arm64: Add dtbs target for building all the enabled dtb files
arm64: use new common dtc rule
ARM: dt: change .dtb build rules to build in dts directory
kbuild: centralize .dts->.dtb rule
Fix build when CONFIG_W1_MASTER_GPIO=m b exporting "allnodes"
of/spi: Honour "status=disabled" property of device
of_mdio: Honour "status=disabled" property of device
of_i2c: Honour "status=disabled" property of device
powerpc: Fix fallout from device_node->name constification
of: add 'const' for of_parse_phandle parameter *np
Documentation: correct of_platform_populate() argument list
script: dtc: clean generated files
...
diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
index e37241f..49fc7ad 100644
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
@@ -23,29 +23,16 @@
- ti,davinci-nand-buswidth: buswidth 8 or 16
- ti,davinci-nand-use-bbt: use flash based bad block table support.
-Example (enbw_cmc board):
-aemif@60000000 {
- compatible = "ti,davinci-aemif";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x68000000 0x80000>;
- ranges = <2 0 0x60000000 0x02000000
- 3 0 0x62000000 0x02000000
- 4 0 0x64000000 0x02000000
- 5 0 0x66000000 0x02000000
- 6 0 0x68000000 0x02000000>;
- nand@3,0 {
- compatible = "ti,davinci-nand";
- reg = <3 0x0 0x807ff
- 6 0x0 0x8000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ti,davinci-chipselect = <1>;
- ti,davinci-mask-ale = <0>;
- ti,davinci-mask-cle = <0>;
- ti,davinci-mask-chipsel = <0>;
- ti,davinci-ecc-mode = "hw";
- ti,davinci-ecc-bits = <4>;
- ti,davinci-nand-use-bbt;
- };
+Example(da850 EVM ):
+nand_cs3@62000000 {
+ compatible = "ti,davinci-nand";
+ reg = <0x62000000 0x807ff
+ 0x68000000 0x8000>;
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
};
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 7ca5216..7c3ee3a 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -37,7 +37,7 @@
reg = <0xfff12000 0x1000>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
- arm,filter-latency = <0x80000000 0x8000000>;
+ arm,filter-ranges = <0x80000000 0x8000000>;
cache-unified;
cache-level = <2>;
interrupts = <45>;
diff --git a/Documentation/devicetree/bindings/i2c/atmel-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/atmel-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-at91.txt
diff --git a/Documentation/devicetree/bindings/i2c/davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/davinci.txt
rename to Documentation/devicetree/bindings/i2c/i2c-davinci.txt
diff --git a/Documentation/devicetree/bindings/i2c/gpio-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/gpio-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-gpio.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-imx.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/fsl-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-mpc.txt
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/mux.txt
rename to Documentation/devicetree/bindings/i2c/i2c-mux.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
new file mode 100644
index 0000000..f46d928
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -0,0 +1,18 @@
+
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : Should be "marvell,mv64xxx-i2c"
+ - interrupts : The interrupt number
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Examples:
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/nomadik.txt
rename to Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
diff --git a/Documentation/devicetree/bindings/i2c/cavium-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/cavium-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-octeon.txt
diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/omap-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-omap.txt
diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/pnx.txt
rename to Documentation/devicetree/bindings/i2c/i2c-pnx.txt
diff --git a/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/ce4100-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
similarity index 70%
rename from Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-pxa.txt
index 0f79450..12b78ac 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
@@ -31,21 +31,3 @@
reg = <0xd4025000 0x1000>;
interrupts = <58>;
};
-
-* Marvell MV64XXX I2C controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : Should be "marvell,mv64xxx-i2c"
- - interrupts : The interrupt number
- - clock-frequency : Desired I2C bus clock frequency in Hz.
-
-Examples:
-
- i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- interrupts = <29>;
- clock-frequency = <100000>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/samsung-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
diff --git a/Documentation/devicetree/bindings/i2c/sirf-i2c.txt b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/sirf-i2c.txt
rename to Documentation/devicetree/bindings/i2c/i2c-sirf.txt
diff --git a/Documentation/devicetree/bindings/i2c/arm-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/arm-versatile.txt
rename to Documentation/devicetree/bindings/i2c/i2c-versatile.txt
diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt
similarity index 100%
rename from Documentation/devicetree/bindings/i2c/xiic.txt
rename to Documentation/devicetree/bindings/i2c/i2c-xiic.txt
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
new file mode 100644
index 0000000..2d88816
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -0,0 +1,23 @@
+Common leds properties.
+
+Optional properties for child nodes:
+- label : The label for this LED. If omitted, the label is
+ taken from the node name (excluding the unit address).
+
+- linux,default-trigger : This parameter, if present, is a
+ string defining the trigger assigned to the LED. Current triggers are:
+ "backlight" - LED will act as a back-light, controlled by the framebuffer
+ system
+ "default-on" - LED will turn on (but for leds-gpio see "default-state"
+ property in Documentation/devicetree/bindings/gpio/led.txt)
+ "heartbeat" - LED "double" flashes at a load average based rate
+ "ide-disk" - LED indicates disk activity
+ "timer" - LED flashes at a fixed, configurable rate
+
+Examples:
+
+system-status {
+ label = "Status";
+ linux,default-trigger = "heartbeat";
+ ...
+};
diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
similarity index 68%
rename from Documentation/devicetree/bindings/gpio/led.txt
rename to Documentation/devicetree/bindings/leds/leds-gpio.txt
index edc83c1..df1b308 100644
--- a/Documentation/devicetree/bindings/gpio/led.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -10,16 +10,10 @@
- gpios : Should specify the LED's GPIO, see "gpios property" in
Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be
indicated using flags in the GPIO specifier.
-- label : (optional) The label for this LED. If omitted, the label is
- taken from the node name (excluding the unit address).
-- linux,default-trigger : (optional) This parameter, if present, is a
- string defining the trigger assigned to the LED. Current triggers are:
- "backlight" - LED will act as a back-light, controlled by the framebuffer
- system
- "default-on" - LED will turn on, but see "default-state" below
- "heartbeat" - LED "double" flashes at a load average based rate
- "ide-disk" - LED indicates disk activity
- "timer" - LED flashes at a fixed, configurable rate
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
- default-state: (optional) The initial state of the LED. Valid
values are "on", "off", and "keep". If the LED is already on or off
and the default-state property is set the to same value, then no
diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
new file mode 100644
index 0000000..3bf63ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
@@ -0,0 +1,18 @@
+* Mvebu Real Time Clock
+
+RTC controller for the Kirkwood, the Dove, the Armada 370 and the
+Armada XP SoCs
+
+Required properties:
+- compatible : Should be "marvell,orion-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@10300 {
+ compatible = "marvell,orion-rtc";
+ reg = <0xd0010300 0x20>;
+ interrupts = <50>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 9de2b9f..770a019 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -5,6 +5,7 @@
ad Avionic Design GmbH
adi Analog Devices, Inc.
+ak Asahi Kasei Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
@@ -25,6 +26,7 @@
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
+img Imagination Technologies Ltd.
intercontrol Inter Control Group
linux Linux-specific binding
marvell Marvell Technology Group Ltd.
@@ -34,8 +36,9 @@
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
+onnn ON Semiconductor Corp.
picochip Picochip Ltd
-powervr Imagination Technologies
+powervr PowerVR (deprecated, use img)
qcom Qualcomm, Inc.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
@@ -45,6 +48,7 @@
sil Silicon Image
simtek
sirf SiRF Technology, Inc.
+snps Synopsys, Inc.
st STMicroelectronics
stericsson ST-Ericsson
ti Texas Instruments
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt
index dca90fe..ef9d06c 100644
--- a/Documentation/devicetree/usage-model.txt
+++ b/Documentation/devicetree/usage-model.txt
@@ -347,7 +347,7 @@
tree. Therefore, if a DT node is at the root of the tree, then it
really probably is best registered as a platform_device.
-Linux board support code calls of_platform_populate(NULL, NULL, NULL)
+Linux board support code calls of_platform_populate(NULL, NULL, NULL, NULL)
to kick off discovery of devices at the root of the tree. The
parameters are all NULL because when starting from the root of the
tree, there is no need to provide a starting node (the first NULL), a
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index ec9ae67..14c3f4f 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1175,15 +1175,16 @@
in an init section in the image. Platform code *must* copy the
blob to non-init memory prior to calling unflatten_device_tree().
+ To use this command, simply add *.dtb into obj-y or targets, or make
+ some other target depend on %.dtb
+
+ A central rule exists to create $(obj)/%.dtb from $(src)/%.dts;
+ architecture Makefiles do no need to explicitly write out that rule.
+
Example:
- #arch/x86/platform/ce4100/Makefile
- clean-files := *dtb.S
-
- DTC_FLAGS := -p 1024
- obj-y += foo.dtb.o
-
- $(obj)/%.dtb: $(src)/%.dts
- $(call cmd,dtc)
+ targets += $(dtb-y)
+ clean-files += *.dtb
+ DTC_FLAGS ?= -p 1024
--- 6.8 Custom kbuild commands
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5f914fc..c35baf1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -292,10 +292,10 @@
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 9137df5..abfce28 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,8 +15,6 @@
include $(srctree)/$(MACHINE)/Makefile.boot
endif
-include $(srctree)/arch/arm/boot/dts/Makefile
-
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
@@ -59,16 +57,6 @@
endif
-targets += $(dtb-y)
-
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files := *.dtb
-
ifneq ($(LOADADDR),)
UIMAGE_LOADADDR=$(LOADADDR)
else
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fb5b077..2624937 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -120,4 +120,12 @@
wm8505-ref.dtb \
wm8650-mid.dtb
+targets += dtbs
endif
+
+# *.dtb used to be generated in the directory above. Clean out the
+# old build results so people don't accidentally use them.
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ $(Q)rm -f $(obj)/../*.dtb
+
+clean-files := *.dtb
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f0ba901..a20d4ff 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -523,12 +523,12 @@
};
temperature-sensor@4c {
- compatible = "nct1008";
+ compatible = "onnn,nct1008";
reg = <0x4c>;
};
magnetometer@c {
- compatible = "ak8975";
+ compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <109 0x04>; /* gpio PN5 */
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index aeae9c6..6d65ba2 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -11,6 +11,8 @@
#ifndef __ASMARM_PROM_H
#define __ASMARM_PROM_H
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
#ifdef CONFIG_OF
extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 560e0df..359f782 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -589,7 +589,7 @@
return;
/* Confirm board type against DT property, if available */
- if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
+ if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
int site = v2m_get_master_site();
u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 364191f..c95c5cb 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -41,20 +41,24 @@
libs-y += $(LIBGCC)
# Default target when executing plain make
-KBUILD_IMAGE := Image.gz
+KBUILD_IMAGE := Image.gz
+KBUILD_DTBS := dtbs
-all: $(KBUILD_IMAGE)
+all: $(KBUILD_IMAGE) $(KBUILD_DTBS)
boot := arch/arm64/boot
Image Image.gz: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
zinstall install: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+ $(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+%.dtb: scripts
+ $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
+
+dtbs: scripts
+ $(Q)$(MAKE) $(build)=$(boot)/dts dtbs
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
@@ -63,6 +67,7 @@
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+ echo '* dtbs - Build device tree blobs for enabled boards'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index eca209b..5a0e3ab 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -22,9 +22,6 @@
$(obj)/Image.gz: $(obj)/Image FORCE
$(call if_changed,gzip)
-$(obj)/%.dtb: $(src)/dts/%.dts
- $(call cmd,dtc)
-
install: $(obj)/Image
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
@@ -32,5 +29,3 @@
zinstall: $(obj)/Image.gz
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image.gz System.map "$(INSTALL_PATH)"
-
-clean-files += *.dtb
diff --git a/arch/arm64/boot/dts/.gitignore b/arch/arm64/boot/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/arm64/boot/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
new file mode 100644
index 0000000..801e2d7
--- /dev/null
+++ b/arch/arm64/boot/dts/Makefile
@@ -0,0 +1,5 @@
+targets += dtbs
+
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+
+clean-files := *.dtb
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index a9eb959..e72eb34 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -41,7 +41,7 @@
export DTB
ifneq ($(DTB),)
-core-y += $(boot)/
+core-y += $(boot)/dts/
endif
# With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index 6891257..8734abe 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -6,25 +6,5 @@
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
-DTC_FLAGS ?= -p 1024
-
-ifneq ($(DTB),)
-obj-y += linked_dtb.o
-endif
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-quiet_cmd_cp = CP $< $@$2
- cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
-
-# Generate builtin.dtb from $(DTB).dtb
-$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
- $(call if_changed,cp)
-
-$(obj)/linked_dtb.o: $(obj)/builtin.dtb
-
$(obj)/dtbImage.%: vmlinux
$(call if_changed,objcopy)
-
-clean-files := $(obj)/*.dtb
diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile
new file mode 100644
index 0000000..c7528b0
--- /dev/null
+++ b/arch/c6x/boot/dts/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for device trees
+#
+
+DTC_FLAGS ?= -p 1024
+
+ifneq ($(DTB),)
+obj-y += linked_dtb.o
+endif
+
+quiet_cmd_cp = CP $< $@$2
+ cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+# Generate builtin.dtb from $(DTB).dtb
+$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,cp)
+
+$(obj)/linked_dtb.o: $(obj)/builtin.dtb
+
+clean-files := *.dtb
diff --git a/arch/c6x/boot/dts/linked_dtb.S b/arch/c6x/boot/dts/linked_dtb.S
new file mode 100644
index 0000000..cf347f1
--- /dev/null
+++ b/arch/c6x/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/c6x/boot/dts/builtin.dtb"
diff --git a/arch/c6x/boot/linked_dtb.S b/arch/c6x/boot/linked_dtb.S
deleted file mode 100644
index 57a4454..0000000
--- a/arch/c6x/boot/linked_dtb.S
+++ /dev/null
@@ -1,2 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/c6x/boot/builtin.dtb"
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index b23c40e..d26fb90 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -57,7 +57,7 @@
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
ifneq ($(DTB),)
- core-y += $(boot)/
+ core-y += $(boot)/dts/
endif
# defines filename extension depending memory management type
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index fa83ea4..80fe54f 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -2,21 +2,10 @@
# arch/microblaze/boot/Makefile
#
-obj-y += linked_dtb.o
-
targets := linux.bin linux.bin.gz simpleImage.%
OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
-# Ensure system.dtb exists
-$(obj)/linked_dtb.o: $(obj)/system.dtb
-
-# Generate system.dtb from $(DTB).dtb
-ifneq ($(DTB),system)
-$(obj)/system.dtb: $(obj)/$(DTB).dtb
- $(call if_changed,cp)
-endif
-
$(obj)/linux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(call if_changed,uimage)
@@ -45,10 +34,4 @@
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-# Rule to build device tree blobs
-DTC_FLAGS := -p 1024
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub
+clean-files += simpleImage.*.unstrip linux.bin.ub
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
new file mode 100644
index 0000000..c3b3a5d
--- /dev/null
+++ b/arch/microblaze/boot/dts/Makefile
@@ -0,0 +1,22 @@
+#
+# arch/microblaze/boot/Makefile
+#
+
+obj-y += linked_dtb.o
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,cp)
+endif
+
+quiet_cmd_cp = CP $< $@$2
+ cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+# Rule to build device tree blobs
+DTC_FLAGS := -p 1024
+
+clean-files += *.dtb
diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S
new file mode 100644
index 0000000..23345af
--- /dev/null
+++ b/arch/microblaze/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/dts/system.dtb"
diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S
deleted file mode 100644
index cb2b537..0000000
--- a/arch/microblaze/boot/linked_dtb.S
+++ /dev/null
@@ -1,3 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/microblaze/boot/system.dtb"
-
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index bc96e29..6e927cf 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -24,9 +24,6 @@
obj-y += $(patsubst %.dts, %.dtb.o, $(DTS_FILES))
-$(obj)/%.dtb: $(src)/%.dts FORCE
- $(call if_changed_dep,dtc)
-
# Let's keep the .dtb files around in case we want to look at them.
.SECONDARY: $(addprefix $(obj)/, $(DTB_FILES))
diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile
index 674fca4..6fa72dd 100644
--- a/arch/mips/lantiq/dts/Makefile
+++ b/arch/mips/lantiq/dts/Makefile
@@ -1,4 +1 @@
obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
-
-$(obj)/%.dtb: $(obj)/%.dts
- $(call if_changed,dtc)
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index 67ae3fe2..d117d46 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1,4 +1 @@
obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
-
-$(obj)/%.dtb: $(obj)/%.dts
- $(call if_changed,dtc)
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
index 966886c..4739b83 100644
--- a/arch/openrisc/Makefile
+++ b/arch/openrisc/Makefile
@@ -50,6 +50,6 @@
else
BUILTIN_DTB := n
endif
-core-$(BUILTIN_DTB) += arch/openrisc/boot/
+core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/
all: vmlinux
diff --git a/arch/openrisc/boot/Makefile b/arch/openrisc/boot/dts/Makefile
similarity index 75%
rename from arch/openrisc/boot/Makefile
rename to arch/openrisc/boot/dts/Makefile
index 0995835..b092d30 100644
--- a/arch/openrisc/boot/Makefile
+++ b/arch/openrisc/boot/dts/Makefile
@@ -1,5 +1,3 @@
-
-
ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o
else
@@ -10,6 +8,3 @@
clean-files := *.dtb.S
#DTC_FLAGS ?= -p 1024
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index b0c3777..d588e48 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -686,7 +686,7 @@
int count = 0;
for (pp = dev->node->properties; pp != 0; pp = pp->next) {
- char *name;
+ const char *name;
if (strncmp(pp->name, PP_PREFIX, plen) != 0)
continue;
name = pp->name + plen;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 39f71fb..2f46681 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -281,12 +281,11 @@
if (!new)
return NULL;
- if (!(new->name = kmalloc(strlen(name) + 1, GFP_KERNEL)))
+ if (!(new->name = kstrdup(name, GFP_KERNEL)))
goto cleanup;
if (!(new->value = kmalloc(length + 1, GFP_KERNEL)))
goto cleanup;
- strcpy(new->name, name);
memcpy(new->value, value, length);
*(((char *)new->value) + length) = 0;
new->length = length;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ffb93ae..01b62a6 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -136,7 +136,7 @@
u32 pcicsrbar = 0, pcicsrbar_sz;
u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
- char *name = hose->dn->full_name;
+ const char *name = hose->dn->full_name;
const u64 *reg;
int len;
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 702256a..9193e12 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -157,7 +157,7 @@
ent->map = SCOM_MAP_INVALID;
spin_lock_init(&ent->lock);
snprintf(ent->name, 8, "scom%d", i);
- ent->blob.data = dn->full_name;
+ ent->blob.data = (void*) dn->full_name;
ent->blob.size = strlen(dn->full_name);
dir = debugfs_create_dir(ent->name, root);
diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h
index 918a203..5f68853 100644
--- a/arch/sparc/kernel/pci_impl.h
+++ b/arch/sparc/kernel/pci_impl.h
@@ -88,7 +88,7 @@
int chip_revision;
/* Name used for top-level resources. */
- char *name;
+ const char *name;
/* OBP specific information. */
struct platform_device *op;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index bffd550..15da1ac 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -9,10 +9,6 @@
* kind, whether express or implied.
*/
-/*
- * This driver can be used from the device tree, see
- * Documentation/devicetree/bindings/i2c/ocore-i2c.txt
- */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/of/base.c b/drivers/of/base.c
index af3b22a..538e3cf 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -45,7 +45,8 @@
static LIST_HEAD(aliases_lookup);
-struct device_node *allnodes;
+struct device_node *of_allnodes;
+EXPORT_SYMBOL(of_allnodes);
struct device_node *of_chosen;
struct device_node *of_aliases;
@@ -199,7 +200,7 @@
struct device_node *np;
read_lock(&devtree_lock);
- np = prev ? prev->allnext : allnodes;
+ np = prev ? prev->allnext : of_allnodes;
for (; np != NULL; np = np->allnext)
if (of_node_get(np))
break;
@@ -422,7 +423,7 @@
*/
struct device_node *of_find_node_by_path(const char *path)
{
- struct device_node *np = allnodes;
+ struct device_node *np = of_allnodes;
read_lock(&devtree_lock);
for (; np; np = np->allnext) {
@@ -452,7 +453,7 @@
struct device_node *np;
read_lock(&devtree_lock);
- np = from ? from->allnext : allnodes;
+ np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext)
if (np->name && (of_node_cmp(np->name, name) == 0)
&& of_node_get(np))
@@ -481,7 +482,7 @@
struct device_node *np;
read_lock(&devtree_lock);
- np = from ? from->allnext : allnodes;
+ np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext)
if (np->type && (of_node_cmp(np->type, type) == 0)
&& of_node_get(np))
@@ -512,7 +513,7 @@
struct device_node *np;
read_lock(&devtree_lock);
- np = from ? from->allnext : allnodes;
+ np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext) {
if (type
&& !(np->type && (of_node_cmp(np->type, type) == 0)))
@@ -545,7 +546,7 @@
struct property *pp;
read_lock(&devtree_lock);
- np = from ? from->allnext : allnodes;
+ np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext) {
for (pp = np->properties; pp; pp = pp->next) {
if (of_prop_cmp(pp->name, prop_name) == 0) {
@@ -594,27 +595,35 @@
EXPORT_SYMBOL(of_match_node);
/**
- * of_find_matching_node - Find a node based on an of_device_id match
- * table.
+ * of_find_matching_node_and_match - Find a node based on an of_device_id
+ * match table.
* @from: The node to start searching from or NULL, the node
* you pass will not be searched, only the next one
* will; typically, you pass what the previous call
* returned. of_node_put() will be called on it
* @matches: array of of device match structures to search in
+ * @match Updated to point at the matches entry which matched
*
* Returns a node pointer with refcount incremented, use
* of_node_put() on it when done.
*/
-struct device_node *of_find_matching_node(struct device_node *from,
- const struct of_device_id *matches)
+struct device_node *of_find_matching_node_and_match(struct device_node *from,
+ const struct of_device_id *matches,
+ const struct of_device_id **match)
{
struct device_node *np;
+ if (match)
+ *match = NULL;
+
read_lock(&devtree_lock);
- np = from ? from->allnext : allnodes;
+ np = from ? from->allnext : of_allnodes;
for (; np; np = np->allnext) {
- if (of_match_node(matches, np) && of_node_get(np))
+ if (of_match_node(matches, np) && of_node_get(np)) {
+ if (match)
+ *match = matches;
break;
+ }
}
of_node_put(from);
read_unlock(&devtree_lock);
@@ -661,7 +670,7 @@
struct device_node *np;
read_lock(&devtree_lock);
- for (np = allnodes; np; np = np->allnext)
+ for (np = of_allnodes; np; np = np->allnext)
if (np->phandle == handle)
break;
of_node_get(np);
@@ -671,12 +680,89 @@
EXPORT_SYMBOL(of_find_node_by_phandle);
/**
+ * of_property_read_u8_array - Find and read an array of u8 from a property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_value: pointer to return value, modified only if return value is 0.
+ * @sz: number of array elements to read
+ *
+ * Search for a property in a device node and read 8-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ * property = /bits/ 8 <0x50 0x60 0x70>;
+ *
+ * The out_value is modified only if a valid u8 value can be decoded.
+ */
+int of_property_read_u8_array(const struct device_node *np,
+ const char *propname, u8 *out_values, size_t sz)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ const u8 *val;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if ((sz * sizeof(*out_values)) > prop->length)
+ return -EOVERFLOW;
+
+ val = prop->value;
+ while (sz--)
+ *out_values++ = *val++;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u8_array);
+
+/**
+ * of_property_read_u16_array - Find and read an array of u16 from a property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_value: pointer to return value, modified only if return value is 0.
+ * @sz: number of array elements to read
+ *
+ * Search for a property in a device node and read 16-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ * property = /bits/ 16 <0x5000 0x6000 0x7000>;
+ *
+ * The out_value is modified only if a valid u16 value can be decoded.
+ */
+int of_property_read_u16_array(const struct device_node *np,
+ const char *propname, u16 *out_values, size_t sz)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ const __be16 *val;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if ((sz * sizeof(*out_values)) > prop->length)
+ return -EOVERFLOW;
+
+ val = prop->value;
+ while (sz--)
+ *out_values++ = be16_to_cpup(val++);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u16_array);
+
+/**
* of_property_read_u32_array - Find and read an array of 32 bit integers
* from a property.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_value: pointer to return value, modified only if return value is 0.
+ * @sz: number of array elements to read
*
* Search for a property in a device node and read 32-bit value(s) from
* it. Returns 0 on success, -EINVAL if the property does not exist,
@@ -893,8 +979,8 @@
* Returns the device_node pointer with refcount incremented. Use
* of_node_put() on it when done.
*/
-struct device_node *
-of_parse_phandle(struct device_node *np, const char *phandle_name, int index)
+struct device_node *of_parse_phandle(const struct device_node *np,
+ const char *phandle_name, int index)
{
const __be32 *phandle;
int size;
@@ -1169,9 +1255,9 @@
write_lock_irqsave(&devtree_lock, flags);
np->sibling = np->parent->child;
- np->allnext = allnodes;
+ np->allnext = of_allnodes;
np->parent->child = np;
- allnodes = np;
+ of_allnodes = np;
write_unlock_irqrestore(&devtree_lock, flags);
}
@@ -1192,11 +1278,11 @@
if (!parent)
goto out_unlock;
- if (allnodes == np)
- allnodes = np->allnext;
+ if (of_allnodes == np)
+ of_allnodes = np->allnext;
else {
struct device_node *prev;
- for (prev = allnodes;
+ for (prev = of_allnodes;
prev->allnext != np;
prev = prev->allnext)
;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 91a375f..a65c39c 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -186,6 +186,8 @@
*/
fpsize = 1;
allocl = 2;
+ l = 1;
+ *pathp = '\0';
} else {
/* account for '/' and path size minus terminal 0
* already in 'l'
@@ -198,10 +200,10 @@
np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
__alignof__(struct device_node));
if (allnextpp) {
+ char *fn;
memset(np, 0, sizeof(*np));
- np->full_name = ((char *)np) + sizeof(struct device_node);
+ np->full_name = fn = ((char *)np) + sizeof(*np);
if (new_format) {
- char *fn = np->full_name;
/* rebuild full path for new format */
if (dad && dad->parent) {
strcpy(fn, dad->full_name);
@@ -215,9 +217,9 @@
fn += strlen(fn);
}
*(fn++) = '/';
- memcpy(fn, pathp, l);
- } else
- memcpy(np->full_name, pathp, l);
+ }
+ memcpy(fn, pathp, l);
+
prev_pp = &np->properties;
**allnextpp = np;
*allnextpp = &np->allnext;
@@ -459,7 +461,7 @@
do {
u32 tag = be32_to_cpup((__be32 *)p);
- char *pathp;
+ const char *pathp;
p += 4;
if (tag == OF_DT_END_NODE) {
@@ -487,7 +489,7 @@
pathp = (char *)p;
p = ALIGN(p + strlen(pathp) + 1, 4);
if ((*pathp) == '/') {
- char *lp, *np;
+ const char *lp, *np;
for (lp = NULL, np = pathp; *np; np++)
if ((*np) == '/')
lp = np+1;
@@ -710,7 +712,7 @@
*/
void __init unflatten_device_tree(void)
{
- __unflatten_device_tree(initial_boot_params, &allnodes,
+ __unflatten_device_tree(initial_boot_params, &of_allnodes,
early_init_dt_alloc_memory_arch);
/* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 3550f3b..b667264 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -29,7 +29,7 @@
dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
- for_each_child_of_node(adap->dev.of_node, node) {
+ for_each_available_child_of_node(adap->dev.of_node, node) {
struct i2c_board_info info = {};
struct dev_archdata dev_ad = {};
const __be32 *addr;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 8e6c25f..83ca06f 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -53,7 +53,7 @@
return rc;
/* Loop over the child nodes and register a phy_device for each one */
- for_each_child_of_node(np, child) {
+ for_each_available_child_of_node(np, child) {
const __be32 *paddr;
u32 addr;
int len;
diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c
index 07cc1d6..37b56fd 100644
--- a/drivers/of/pdt.c
+++ b/drivers/of/pdt.c
@@ -241,15 +241,15 @@
BUG_ON(!ops);
of_pdt_prom_ops = ops;
- allnodes = of_pdt_create_node(root_node, NULL);
+ of_allnodes = of_pdt_create_node(root_node, NULL);
#if defined(CONFIG_SPARC)
- allnodes->path_component_name = "";
+ of_allnodes->path_component_name = "";
#endif
- allnodes->full_name = "/";
+ of_allnodes->full_name = "/";
- nextp = &allnodes->allnext;
- allnodes->child = of_pdt_build_tree(allnodes,
- of_pdt_prom_ops->getchild(allnodes->phandle), &nextp);
+ nextp = &of_allnodes->allnext;
+ of_allnodes->child = of_pdt_build_tree(of_allnodes,
+ of_pdt_prom_ops->getchild(of_allnodes->phandle), &nextp);
/* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
of_alias_scan(kernel_tree_alloc);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 84c2861..d3e6408 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -819,7 +819,7 @@
if (!master->dev.of_node)
return;
- for_each_child_of_node(master->dev.of_node, nc) {
+ for_each_available_child_of_node(master->dev.of_node, nc) {
/* Alloc an spi_device */
spi = spi_alloc_device(master);
if (!spi) {
diff --git a/include/linux/of.h b/include/linux/of.h
index b4e50d5..60053bd 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -46,7 +46,7 @@
const char *name;
const char *type;
phandle phandle;
- char *full_name;
+ const char *full_name;
struct property *properties;
struct property *deadprops; /* removed properties */
@@ -60,7 +60,7 @@
unsigned long _flags;
void *data;
#if defined(CONFIG_SPARC)
- char *path_component_name;
+ const char *path_component_name;
unsigned int unique_id;
struct of_irq_controller *irq_trans;
#endif
@@ -88,14 +88,14 @@
#ifdef CONFIG_OF
/* Pointer for first entry in chain of all nodes. */
-extern struct device_node *allnodes;
+extern struct device_node *of_allnodes;
extern struct device_node *of_chosen;
extern struct device_node *of_aliases;
extern rwlock_t devtree_lock;
static inline bool of_have_populated_dt(void)
{
- return allnodes != NULL;
+ return of_allnodes != NULL;
}
static inline bool of_node_is_root(const struct device_node *node)
@@ -179,11 +179,22 @@
#define for_each_compatible_node(dn, type, compatible) \
for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
dn = of_find_compatible_node(dn, type, compatible))
-extern struct device_node *of_find_matching_node(struct device_node *from,
- const struct of_device_id *matches);
+extern struct device_node *of_find_matching_node_and_match(
+ struct device_node *from,
+ const struct of_device_id *matches,
+ const struct of_device_id **match);
+static inline struct device_node *of_find_matching_node(
+ struct device_node *from,
+ const struct of_device_id *matches)
+{
+ return of_find_matching_node_and_match(from, matches, NULL);
+}
#define for_each_matching_node(dn, matches) \
for (dn = of_find_matching_node(NULL, matches); dn; \
dn = of_find_matching_node(dn, matches))
+#define for_each_matching_node_and_match(dn, matches, match) \
+ for (dn = of_find_matching_node_and_match(NULL, matches, match); \
+ dn; dn = of_find_matching_node_and_match(dn, matches, match))
extern struct device_node *of_find_node_by_path(const char *path);
extern struct device_node *of_find_node_by_phandle(phandle handle);
extern struct device_node *of_get_parent(const struct device_node *node);
@@ -223,6 +234,10 @@
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u8_array(const struct device_node *np,
+ const char *propname, u8 *out_values, size_t sz);
+extern int of_property_read_u16_array(const struct device_node *np,
+ const char *propname, u16 *out_values, size_t sz);
extern int of_property_read_u32_array(const struct device_node *np,
const char *propname,
u32 *out_values,
@@ -255,7 +270,7 @@
extern const struct of_device_id *of_match_node(
const struct of_device_id *matches, const struct device_node *node);
extern int of_modalias_node(struct device_node *node, char *modalias, int len);
-extern struct device_node *of_parse_phandle(struct device_node *np,
+extern struct device_node *of_parse_phandle(const struct device_node *np,
const char *phandle_name,
int index);
extern int of_parse_phandle_with_args(struct device_node *np,
@@ -364,6 +379,18 @@
return NULL;
}
+static inline int of_property_read_u8_array(const struct device_node *np,
+ const char *propname, u8 *out_values, size_t sz)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_read_u16_array(const struct device_node *np,
+ const char *propname, u16 *out_values, size_t sz)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_u32_array(const struct device_node *np,
const char *propname,
u32 *out_values, size_t sz)
@@ -411,7 +438,7 @@
return -ENOSYS;
}
-static inline struct device_node *of_parse_phandle(struct device_node *np,
+static inline struct device_node *of_parse_phandle(const struct device_node *np,
const char *phandle_name,
int index)
{
@@ -470,6 +497,20 @@
return prop ? true : false;
}
+static inline int of_property_read_u8(const struct device_node *np,
+ const char *propname,
+ u8 *out_value)
+{
+ return of_property_read_u8_array(np, propname, out_value, 1);
+}
+
+static inline int of_property_read_u16(const struct device_node *np,
+ const char *propname,
+ u16 *out_value)
+{
+ return of_property_read_u16_array(np, propname, out_value, 1);
+}
+
static inline int of_property_read_u32(const struct device_node *np,
const char *propname,
u32 *out_value)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 0be6f11..bdf42fd 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -266,6 +266,9 @@
quiet_cmd_dtc = DTC $@
cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) -d $(depfile) $<
+$(obj)/%.dtb: $(src)/%.dts FORCE
+ $(call if_changed_dep,dtc)
+
# Bzip2
# ---------------------------------------------------------------------------
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 6d1c6bb..2a48022 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -27,3 +27,5 @@
# dependencies on generated files need to be listed explicitly
$(obj)/dtc-lexer.lex.o: $(obj)/dtc-parser.tab.h
+# generated files need to be cleaned explicitly
+clean-files := dtc-lexer.lex.c dtc-parser.tab.c dtc-parser.tab.h