[PATCH] change the SOUND_PRIME handling
SOUND_PRIME (for OSS) is a tristate.
This doesn't make much sense if most users are checking for
SOUND_PRIME!=0.
This patch changes the semantics of SOUND_PRIME to being a limit for all
OSS modules, IOW: SOUND_PRIME=m does now say that all OSS drivers can
only be modular.
As a side effect, since SOUND_PRIME already depends on SOUND, there's no
longer a reason for drivers depending on SOUND_PRIME to additionally
depend on SOUND.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index e537bd6..3b1fafc 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -6,7 +6,7 @@
# Prompt user for primary drivers.
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
@@ -22,7 +22,7 @@
config SOUND_CMPCI
tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card using the CMI8338
or the CMI8738 chipset. Data on these chips are available at
@@ -61,7 +61,7 @@
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -87,7 +87,7 @@
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
@@ -95,14 +95,14 @@
config SOUND_CS4281
tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
- depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND
+ depends on SOUND_PRIME && SIBYTE_SWARM
help
The BCM91250A has a Crystal CS4297a on synchronous serial
port B (in addition to the DB-9 serial port). Say Y or M
@@ -112,7 +112,7 @@
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
@@ -125,7 +125,7 @@
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -138,7 +138,7 @@
config SOUND_ESSSOLO1
tristate "ESS Technology Solo1"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
@@ -149,7 +149,7 @@
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
@@ -158,28 +158,28 @@
config SOUND_MAESTRO3
tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
+ depends on SOUND_PRIME && PCI && EXPERIMENTAL
help
Say Y or M if you have a sound system driven by ESS's Maestro 3
PCI sound chip.
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
config SOUND_HARMONY
tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND_PRIME!=n
+ depends on GSC_LASI && SOUND_PRIME
help
Say 'Y' or 'M' to include support for Harmony soundchip
on HP 712, 715/new and many other GSC based machines.
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
@@ -190,7 +190,7 @@
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
- depends on SOUND_PRIME!=n && X86_VISWS && SOUND
+ depends on SOUND_PRIME && X86_VISWS
help
Say Y or M if you have an SGI Visual Workstation and you want to be
able to use its on-board audio. Read
@@ -199,18 +199,18 @@
config SOUND_HAL2
tristate "SGI HAL2 sound (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
+ depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
help
Say Y or M if you have an SGI Indy system and want to be able to
use it's on-board A2 audio system.
config SOUND_IT8172
tristate "IT8172G Sound"
- depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND
+ depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR)
config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME!=n && DDB5477 && SOUND
+ depends on SOUND_PRIME && DDB5477
help
Say Y here to enable sound support for the NEC Vrc5477 chip, an
integrated, multi-function controller chip for MIPS CPUs. Works
@@ -218,15 +218,15 @@
config SOUND_AU1000
tristate "Au1000 Sound"
- depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
+ depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500)
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
- depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND
+ depends on SOUND_PRIME && SOC_AU1550
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -267,7 +267,7 @@
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
@@ -331,7 +331,7 @@
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
@@ -492,7 +492,7 @@
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
@@ -512,7 +512,7 @@
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
@@ -1077,7 +1077,7 @@
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME!=n && SOUND && I2C
+ depends on SOUND_PRIME && I2C
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
@@ -1088,11 +1088,11 @@
config SOUND_ALI5455
tristate "ALi5455 audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
config SOUND_FORTE
tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you want driver support for the ForteMedia FM801 PCI
audio controller (Abit AU10, Genius Sound Maker, HP Workstation
@@ -1100,7 +1100,7 @@
config SOUND_RME96XX
tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a Hammerfall or Hammerfall light
multichannel card from RME. If you want to access advanced
@@ -1108,11 +1108,11 @@
config SOUND_AD1980
tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME!=n
+ depends on SOUND_PRIME
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
- depends on SOUND_PRIME!=n && SOUND && CPU_SH3
+ depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
int " DAC channel"