include/linux/tty_driver.h - kernel/msm-4.19 - Gitiles

 #ifndef _LINUX_TTY_DRIVER_H
 #define _LINUX_TTY_DRIVER_H

 /*
  * This structure defines the interface between the low-level tty
  * driver and the tty routines.  The following routines can be
  * defined; unless noted otherwise, they are optional, and can be
  * filled in with a null pointer.
  *
  * int  (*open)(struct tty_struct * tty, struct file * filp);
  *
  * 	This routine is called when a particular tty device is opened.
  * 	This routine is mandatory; if this routine is not filled in,
  * 	the attempted open will fail with ENODEV.
  *
  *	Required method.
  *
  * void (*close)(struct tty_struct * tty, struct file * filp);
  *
  * 	This routine is called when a particular tty device is closed.
  *
  *	Required method.
  *
  * int (*write)(struct tty_struct * tty,
  * 		 const unsigned char *buf, int count);
  *
  * 	This routine is called by the kernel to write a series of
  * 	characters to the tty device.  The characters may come from
  * 	user space or kernel space.  This routine will return the
  *	number of characters actually accepted for writing.
  *
  *	Optional: Required for writable devices.
  *
  * int (*put_char)(struct tty_struct *tty, unsigned char ch);
  *
  * 	This routine is called by the kernel to write a single
  * 	character to the tty device.  If the kernel uses this routine,
  * 	it must call the flush_chars() routine (if defined) when it is
  * 	done stuffing characters into the driver.  If there is no room
  * 	in the queue, the character is ignored.
  *
  *	Optional: Kernel will use the write method if not provided.
  *
  *	Note: Do not call this function directly, call tty_put_char
  *
  * void (*flush_chars)(struct tty_struct *tty);
  *
  * 	This routine is called by the kernel after it has written a
  * 	series of characters to the tty device using put_char().
  *
  *	Optional:
  *
  *	Note: Do not call this function directly, call tty_driver_flush_chars
  *
  * int  (*write_room)(struct tty_struct *tty);
  *
  * 	This routine returns the numbers of characters the tty driver
  * 	will accept for queuing to be written.  This number is subject
  * 	to change as output buffers get emptied, or if the output flow
  *	control is acted.
  *
  *	Required if write method is provided else not needed.
  *
  *	Note: Do not call this function directly, call tty_write_room
  *
  * int  (*ioctl)(struct tty_struct *tty, struct file * file,
  * 	    unsigned int cmd, unsigned long arg);
  *
  * 	This routine allows the tty driver to implement
  *	device-specific ioctl's.  If the ioctl number passed in cmd
  * 	is not recognized by the driver, it should return ENOIOCTLCMD.
  *
  *	Optional
  *
  * long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
  * 	                unsigned int cmd, unsigned long arg);
  *
  * 	implement ioctl processing for 32 bit process on 64 bit system
  *
  *	Optional
  *
  * void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
  *
  * 	This routine allows the tty driver to be notified when
  * 	device's termios settings have changed.
  *
  *	Optional: Called under the termios lock
  *
  *
  * void (*set_ldisc)(struct tty_struct *tty);
  *
  * 	This routine allows the tty driver to be notified when the
  * 	device's termios settings have changed.
  *
  *	Optional: Called under BKL (currently)
  *
  * void (*throttle)(struct tty_struct * tty);
  *
  * 	This routine notifies the tty driver that input buffers for
  * 	the line discipline are close to full, and it should somehow
  * 	signal that no more characters should be sent to the tty.
  *
  *	Optional: Always invoke via tty_throttle();
  *
  * void (*unthrottle)(struct tty_struct * tty);
  *
  * 	This routine notifies the tty drivers that it should signals
  * 	that characters can now be sent to the tty without fear of
  * 	overrunning the input buffers of the line disciplines.
  *
  *	Optional: Always invoke via tty_unthrottle();
  *
  * void (*stop)(struct tty_struct *tty);
  *
  * 	This routine notifies the tty driver that it should stop
  * 	outputting characters to the tty device.
  *
  *	Optional:
  *
  *	Note: Call stop_tty not this method.
  *
  * void (*start)(struct tty_struct *tty);
  *
  * 	This routine notifies the tty driver that it resume sending
  *	characters to the tty device.
  *
  *	Optional:
  *
  *	Note: Call start_tty not this method.
  *
  * void (*hangup)(struct tty_struct *tty);
  *
  * 	This routine notifies the tty driver that it should hangup the
  * 	tty device.
  *
  *	Optional:
  *
  * void (*break_ctl)(struct tty_stuct *tty, int state);
  *
  * 	This optional routine requests the tty driver to turn on or
  * 	off BREAK status on the RS-232 port.  If state is -1,
  * 	then the BREAK status should be turned on; if state is 0, then
  * 	BREAK should be turned off.
  *
  * 	If this routine is implemented, the high-level tty driver will
  * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
  * 	TIOCCBRK.
  *
  *	Optional: Required for TCSBRK/BRKP/etc handling.
  *
  * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
  *
  * 	This routine waits until the device has written out all of the
  * 	characters in its transmitter FIFO.
  *
  *	Optional: If not provided the device is assumed to have no FIFO
  *
  *	Note: Usually correct to call tty_wait_until_sent
  *
  * void (*send_xchar)(struct tty_struct *tty, char ch);
  *
  * 	This routine is used to send a high-priority XON/XOFF
  * 	character to the device.
  *
  *	Optional: If not provided then the write method is called under
  *	the atomic write lock to keep it serialized with the ldisc.
  */

 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/cdev.h>

 struct tty_struct;
 struct tty_driver;

 struct tty_operations {
 	int  (*open)(struct tty_struct * tty, struct file * filp);
 	void (*close)(struct tty_struct * tty, struct file * filp);
 	int  (*write)(struct tty_struct * tty,
 		      const unsigned char *buf, int count);
 	int  (*put_char)(struct tty_struct *tty, unsigned char ch);
 	void (*flush_chars)(struct tty_struct *tty);
 	int  (*write_room)(struct tty_struct *tty);
 	int  (*chars_in_buffer)(struct tty_struct *tty);
 	int  (*ioctl)(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg);
 	long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
 			     unsigned int cmd, unsigned long arg);
 	void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
 	void (*throttle)(struct tty_struct * tty);
 	void (*unthrottle)(struct tty_struct * tty);
 	void (*stop)(struct tty_struct *tty);
 	void (*start)(struct tty_struct *tty);
 	void (*hangup)(struct tty_struct *tty);
 	void (*break_ctl)(struct tty_struct *tty, int state);
 	void (*flush_buffer)(struct tty_struct *tty);
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
 	void (*send_xchar)(struct tty_struct *tty, char ch);
 	int (*read_proc)(char *page, char **start, off_t off,
 			  int count, int *eof, void *data);
 	int (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int (*tiocmset)(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);
 	void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
 #endif
 };

 struct tty_driver {
 	int	magic;		/* magic number for this structure */
 	struct cdev cdev;
 	struct module	*owner;
 	const char	*driver_name;
 	const char	*name;
 	int	name_base;	/* offset of printed name */
 	int	major;		/* major device number */
 	int	minor_start;	/* start of minor device number */
 	int	minor_num;	/* number of *possible* devices */
 	int	num;		/* number of devices allocated */
 	short	type;		/* type of tty driver */
 	short	subtype;	/* subtype of tty driver */
 	struct ktermios init_termios; /* Initial termios */
 	int	flags;		/* tty driver flags */
 	int	refcount;	/* for loadable tty drivers */
 	struct proc_dir_entry *proc_entry; /* /proc fs entry */
 	struct tty_driver *other; /* only used for the PTY driver */

 	/*
 	 * Pointer to the tty data structures
 	 */
 	struct tty_struct **ttys;
 	struct ktermios **termios;
 	struct ktermios **termios_locked;
 	void *driver_state;

 	/*
 	 * Driver methods
 	 */

 	const struct tty_operations *ops;
 	struct list_head tty_drivers;
 };

 extern struct list_head tty_drivers;

 struct tty_driver *alloc_tty_driver(int lines);
 void put_tty_driver(struct tty_driver *driver);
 void tty_set_operations(struct tty_driver *driver,
 			const struct tty_operations *op);
 extern struct tty_driver *tty_find_polling_driver(char *name, int *line);

 /* tty driver magic number */
 #define TTY_DRIVER_MAGIC		0x5402

 /*
  * tty driver flags
  *
  * TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
  * 	termios setting when the last process has closed the device.
  * 	Used for PTY's, in particular.
  *
  * TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
  * 	guarantee never not to set any special character handling
  * 	flags if ((IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR ||
  * 	!INPCK)).  That is, if there is no reason for the driver to
  * 	send notifications of parity and break characters up to the
  * 	line driver, it won't do so.  This allows the line driver to
  *	optimize for this case if this flag is set.  (Note that there
  * 	is also a promise, if the above case is true, not to signal
  * 	overruns, either.)
  *
  * TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
  *	to be registered with a call to tty_register_driver() when the
  *	device is found in the system and unregistered with a call to
  *	tty_unregister_device() so the devices will be show up
  *	properly in sysfs.  If not set, driver->num entries will be
  *	created by the tty core in sysfs when tty_register_driver() is
  *	called.  This is to be used by drivers that have tty devices
  *	that can appear and disappear while the main tty driver is
  *	registered with the tty core.
  *
  * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
  *	use dynamic memory keyed through the devpts filesystem.  This
  *	is only applicable to the pty driver.
  */
 #define TTY_DRIVER_INSTALLED		0x0001
 #define TTY_DRIVER_RESET_TERMIOS	0x0002
 #define TTY_DRIVER_REAL_RAW		0x0004
 #define TTY_DRIVER_DYNAMIC_DEV		0x0008
 #define TTY_DRIVER_DEVPTS_MEM		0x0010

 /* tty driver types */
 #define TTY_DRIVER_TYPE_SYSTEM		0x0001
 #define TTY_DRIVER_TYPE_CONSOLE		0x0002
 #define TTY_DRIVER_TYPE_SERIAL		0x0003
 #define TTY_DRIVER_TYPE_PTY		0x0004
 #define TTY_DRIVER_TYPE_SCC		0x0005	/* scc driver */
 #define TTY_DRIVER_TYPE_SYSCONS		0x0006

 /* system subtypes (magic, used by tty_io.c) */
 #define SYSTEM_TYPE_TTY			0x0001
 #define SYSTEM_TYPE_CONSOLE		0x0002
 #define SYSTEM_TYPE_SYSCONS		0x0003
 #define SYSTEM_TYPE_SYSPTMX		0x0004

 /* pty subtypes (magic, used by tty_io.c) */
 #define PTY_TYPE_MASTER			0x0001
 #define PTY_TYPE_SLAVE			0x0002

 /* serial subtype definitions */
 #define SERIAL_TYPE_NORMAL	1

 #endif /* #ifdef _LINUX_TTY_DRIVER_H */
	#ifndef _LINUX_TTY_DRIVER_H
	#define _LINUX_TTY_DRIVER_H

	/*
	* This structure defines the interface between the low-level tty
	* driver and the tty routines. The following routines can be
	* defined; unless noted otherwise, they are optional, and can be
	* filled in with a null pointer.
	*
	* int (open)(struct tty_struct tty, struct file * filp);
	*
	* This routine is called when a particular tty device is opened.
	* This routine is mandatory; if this routine is not filled in,
	* the attempted open will fail with ENODEV.
	*
	* Required method.
	*
	* void (close)(struct tty_struct tty, struct file * filp);
	*
	* This routine is called when a particular tty device is closed.
	*
	* Required method.
	*
	* int (write)(struct tty_struct tty,
	* const unsigned char *buf, int count);
	*
	* This routine is called by the kernel to write a series of
	* characters to the tty device. The characters may come from
	* user space or kernel space. This routine will return the
	* number of characters actually accepted for writing.
	*
	* Optional: Required for writable devices.
	*
	* int (put_char)(struct tty_struct tty, unsigned char ch);
	*
	* This routine is called by the kernel to write a single
	* character to the tty device. If the kernel uses this routine,
	* it must call the flush_chars() routine (if defined) when it is
	* done stuffing characters into the driver. If there is no room
	* in the queue, the character is ignored.
	*
	* Optional: Kernel will use the write method if not provided.
	*
	* Note: Do not call this function directly, call tty_put_char
	*
	* void (flush_chars)(struct tty_struct tty);
	*
	* This routine is called by the kernel after it has written a
	* series of characters to the tty device using put_char().
	*
	* Optional:
	*
	* Note: Do not call this function directly, call tty_driver_flush_chars
	*
	* int (write_room)(struct tty_struct tty);
	*
	* This routine returns the numbers of characters the tty driver
	* will accept for queuing to be written. This number is subject
	* to change as output buffers get emptied, or if the output flow
	* control is acted.
	*
	* Required if write method is provided else not needed.
	*
	* Note: Do not call this function directly, call tty_write_room
	*
	* int (ioctl)(struct tty_struct tty, struct file * file,
	* unsigned int cmd, unsigned long arg);
	*
	* This routine allows the tty driver to implement
	* device-specific ioctl's. If the ioctl number passed in cmd
	* is not recognized by the driver, it should return ENOIOCTLCMD.
	*
	* Optional
	*
	* long (compat_ioctl)(struct tty_struct tty, struct file * file,
	* unsigned int cmd, unsigned long arg);
	*
	* implement ioctl processing for 32 bit process on 64 bit system
	*
	* Optional
	*
	* void (set_termios)(struct tty_struct tty, struct ktermios * old);
	*
	* This routine allows the tty driver to be notified when
	* device's termios settings have changed.
	*
	* Optional: Called under the termios lock
	*
	*
	* void (set_ldisc)(struct tty_struct tty);
	*
	* This routine allows the tty driver to be notified when the
	* device's termios settings have changed.
	*
	* Optional: Called under BKL (currently)
	*
	* void (throttle)(struct tty_struct tty);
	*
	* This routine notifies the tty driver that input buffers for
	* the line discipline are close to full, and it should somehow
	* signal that no more characters should be sent to the tty.
	*
	* Optional: Always invoke via tty_throttle();
	*
	* void (unthrottle)(struct tty_struct tty);
	*
	* This routine notifies the tty drivers that it should signals
	* that characters can now be sent to the tty without fear of
	* overrunning the input buffers of the line disciplines.
	*
	* Optional: Always invoke via tty_unthrottle();
	*
	* void (stop)(struct tty_struct tty);
	*
	* This routine notifies the tty driver that it should stop
	* outputting characters to the tty device.
	*
	* Optional:
	*
	* Note: Call stop_tty not this method.
	*
	* void (start)(struct tty_struct tty);
	*
	* This routine notifies the tty driver that it resume sending
	* characters to the tty device.
	*
	* Optional:
	*
	* Note: Call start_tty not this method.
	*
	* void (hangup)(struct tty_struct tty);
	*
	* This routine notifies the tty driver that it should hangup the
	* tty device.
	*
	* Optional:
	*
	* void (break_ctl)(struct tty_stuct tty, int state);
	*
	* This optional routine requests the tty driver to turn on or
	* off BREAK status on the RS-232 port. If state is -1,
	* then the BREAK status should be turned on; if state is 0, then
	* BREAK should be turned off.
	*
	* If this routine is implemented, the high-level tty driver will
	* handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
	* TIOCCBRK.
	*
	* Optional: Required for TCSBRK/BRKP/etc handling.
	*
	* void (wait_until_sent)(struct tty_struct tty, int timeout);
	*
	* This routine waits until the device has written out all of the
	* characters in its transmitter FIFO.
	*
	* Optional: If not provided the device is assumed to have no FIFO
	*
	* Note: Usually correct to call tty_wait_until_sent
	*
	* void (send_xchar)(struct tty_struct tty, char ch);
	*
	* This routine is used to send a high-priority XON/XOFF
	* character to the device.
	*
	* Optional: If not provided then the write method is called under
	* the atomic write lock to keep it serialized with the ldisc.
	*/

	#include <linux/fs.h>
	#include <linux/list.h>
	#include <linux/cdev.h>

	struct tty_struct;
	struct tty_driver;

	struct tty_operations {
	int (open)(struct tty_struct tty, struct file * filp);
	void (close)(struct tty_struct tty, struct file * filp);
	int (write)(struct tty_struct tty,
	const unsigned char *buf, int count);
	int (put_char)(struct tty_struct tty, unsigned char ch);
	void (flush_chars)(struct tty_struct tty);
	int (write_room)(struct tty_struct tty);
	int (chars_in_buffer)(struct tty_struct tty);
	int (ioctl)(struct tty_struct tty, struct file * file,
	unsigned int cmd, unsigned long arg);
	long (compat_ioctl)(struct tty_struct tty, struct file * file,
	unsigned int cmd, unsigned long arg);
	void (set_termios)(struct tty_struct tty, struct ktermios * old);
	void (throttle)(struct tty_struct tty);
	void (unthrottle)(struct tty_struct tty);
	void (stop)(struct tty_struct tty);
	void (start)(struct tty_struct tty);
	void (hangup)(struct tty_struct tty);
	void (break_ctl)(struct tty_struct tty, int state);
	void (flush_buffer)(struct tty_struct tty);
	void (set_ldisc)(struct tty_struct tty);
	void (wait_until_sent)(struct tty_struct tty, int timeout);
	void (send_xchar)(struct tty_struct tty, char ch);
	int (read_proc)(char page, char **start, off_t off,
	int count, int eof, void data);
	int (tiocmget)(struct tty_struct tty, struct file *file);
	int (tiocmset)(struct tty_struct tty, struct file *file,
	unsigned int set, unsigned int clear);
	#ifdef CONFIG_CONSOLE_POLL
	int (poll_init)(struct tty_driver driver, int line, char *options);
	int (poll_get_char)(struct tty_driver driver, int line);
	void (poll_put_char)(struct tty_driver driver, int line, char ch);
	#endif
	};

	struct tty_driver {
	int magic; /* magic number for this structure */
	struct cdev cdev;
	struct module *owner;
	const char *driver_name;
	const char *name;
	int name_base; /* offset of printed name */
	int major; /* major device number */
	int minor_start; /* start of minor device number */
	int minor_num; /* number of possible devices */
	int num; /* number of devices allocated */
	short type; /* type of tty driver */
	short subtype; /* subtype of tty driver */
	struct ktermios init_termios; /* Initial termios */
	int flags; /* tty driver flags */
	int refcount; /* for loadable tty drivers */
	struct proc_dir_entry proc_entry; / /proc fs entry */
	struct tty_driver other; / only used for the PTY driver */

	/*
	* Pointer to the tty data structures
	*/
	struct tty_struct **ttys;
	struct ktermios **termios;
	struct ktermios **termios_locked;
	void *driver_state;

	/*
	* Driver methods
	*/

	const struct tty_operations *ops;
	struct list_head tty_drivers;
	};

	extern struct list_head tty_drivers;

	struct tty_driver *alloc_tty_driver(int lines);
	void put_tty_driver(struct tty_driver *driver);
	void tty_set_operations(struct tty_driver *driver,
	const struct tty_operations *op);
	extern struct tty_driver tty_find_polling_driver(char name, int *line);

	/* tty driver magic number */
	#define TTY_DRIVER_MAGIC 0x5402

	/*
	* tty driver flags
	*
	* TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
	* termios setting when the last process has closed the device.
	* Used for PTY's, in particular.
	*
	* TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
	* guarantee never not to set any special character handling
	* flags if ((IGNBRK \|\| (!BRKINT && !PARMRK)) && (IGNPAR \|\|
	* !INPCK)). That is, if there is no reason for the driver to
	* send notifications of parity and break characters up to the
	* line driver, it won't do so. This allows the line driver to
	* optimize for this case if this flag is set. (Note that there
	* is also a promise, if the above case is true, not to signal
	* overruns, either.)
	*
	* TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
	* to be registered with a call to tty_register_driver() when the
	* device is found in the system and unregistered with a call to
	* tty_unregister_device() so the devices will be show up
	* properly in sysfs. If not set, driver->num entries will be
	* created by the tty core in sysfs when tty_register_driver() is
	* called. This is to be used by drivers that have tty devices
	* that can appear and disappear while the main tty driver is
	* registered with the tty core.
	*
	* TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
	* use dynamic memory keyed through the devpts filesystem. This
	* is only applicable to the pty driver.
	*/
	#define TTY_DRIVER_INSTALLED 0x0001
	#define TTY_DRIVER_RESET_TERMIOS 0x0002
	#define TTY_DRIVER_REAL_RAW 0x0004
	#define TTY_DRIVER_DYNAMIC_DEV 0x0008
	#define TTY_DRIVER_DEVPTS_MEM 0x0010

	/* tty driver types */
	#define TTY_DRIVER_TYPE_SYSTEM 0x0001
	#define TTY_DRIVER_TYPE_CONSOLE 0x0002
	#define TTY_DRIVER_TYPE_SERIAL 0x0003
	#define TTY_DRIVER_TYPE_PTY 0x0004
	#define TTY_DRIVER_TYPE_SCC 0x0005 /* scc driver */
	#define TTY_DRIVER_TYPE_SYSCONS 0x0006

	/* system subtypes (magic, used by tty_io.c) */
	#define SYSTEM_TYPE_TTY 0x0001
	#define SYSTEM_TYPE_CONSOLE 0x0002
	#define SYSTEM_TYPE_SYSCONS 0x0003
	#define SYSTEM_TYPE_SYSPTMX 0x0004

	/* pty subtypes (magic, used by tty_io.c) */
	#define PTY_TYPE_MASTER 0x0001
	#define PTY_TYPE_SLAVE 0x0002

	/* serial subtype definitions */
	#define SERIAL_TYPE_NORMAL 1

	#endif /* #ifdef _LINUX_TTY_DRIVER_H */